Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm / ea2c51da25e76c7f16a26b7931232bcc39f23405 / . / arch / arm / mach-msm / Kconfig
blob: f7d993ffe9c33e0cc478d93a958c68bb2317ce37 [file] [log] [blame]
Brian Swetland1637de02008-09-09 07:13:33 -0700[diff] [blame]1if ARCH_MSM
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2
Stepan Moskovchenko1cd286f2011-08-03 19:03:02 -0700[diff] [blame]3menu "MSM SoC Type"
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]4
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]5config ARCH_MSM7X01A
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]6 bool "MSM7x00A / MSM7x01A"
7 select ARCH_MSM_ARM11
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]8 select MSM_VIC
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]9 select CPU_V6
David Brown74d10d72011-05-16 13:57:39 -0700[diff] [blame]10 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]11 select MSM_REMOTE_SPINLOCK_SWP
12
13config ARCH_MSM7X25
14 bool "MSM7x25"
15 select ARCH_MSM_ARM11
16 select MSM_VIC
17 select CPU_V6
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]18 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]19 select MSM_REMOTE_SPINLOCK_SWP
Taniya Dasbe561a02011-10-12 09:53:11 +0530[diff] [blame]20 select MULTI_IRQ_HANDLER
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]21
22config ARCH_MSM7X27
23 bool "MSM7x27"
24 select ARCH_MSM_ARM11 if MSM_SOC_REV_NONE
Trilok Soni7ff06e02012-10-15 01:05:24 +0530[diff] [blame]25 select ARCH_HAS_BARRIERS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]26 select ARCH_MSM_CORTEX_A5 if MSM_SOC_REV_A
27 select MSM_VIC
28 select CPU_V6 if MSM_SOC_REV_NONE
29 select CPU_V7 if MSM_SOC_REV_A
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]30 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]31 select MSM_REMOTE_SPINLOCK_SWP if MSM_SOC_REV_NONE
32 select MSM_GPIOMUX
33 select REGULATOR
Taniya Dasbe561a02011-10-12 09:53:11 +0530[diff] [blame]34 select MULTI_IRQ_HANDLER
Pankaj Kumar75c86fd2011-10-01 18:51:09 +0530[diff] [blame]35 select MSM_PROC_COMM_REGULATOR
Laura Abbott1fbd2e62011-12-18 10:26:46 -0800[diff] [blame]36 select CLEANCACHE
37 select QCACHE
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]38 select MSM_PM2 if PM
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]39 select MSM_RUN_QUEUE_STATS if MSM_SOC_REV_A
Taniya Dasd4c39f92012-05-14 17:41:49 +0530[diff] [blame]40 select DONT_MAP_HOLE_AFTER_MEMBANK0
Trilok Sonib856ab92012-06-26 14:33:28 +0530[diff] [blame]41 select MIGHT_HAVE_CACHE_L2X0
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]42 select MSM_MODEM_RESTART
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]43
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]44config ARCH_MSM7X30
45 bool "MSM7x30"
46 select ARCH_MSM_SCORPION
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]47 select MSM_VIC
48 select CPU_V7
David Brown74d10d72011-05-16 13:57:39 -0700[diff] [blame]49 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]50 select MSM_REMOTE_SPINLOCK_DEKKERS
51 select ARCH_SPARSEMEM_ENABLE
Laura Abbott78593b52011-09-26 18:48:14 -0700[diff] [blame]52 select ARCH_HAS_HOLES_MEMORYMODEL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]53 select MIGRATION
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]54 select MSM_GPIOMUX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]55 select RESERVE_FIRST_PAGE
56 select MSM_DALRPC
57 select MSM_SPM_V1
58 select REGULATOR
Justin Paupore637a25d2011-07-14 17:11:04 -0700[diff] [blame]59 select MSM_PROC_COMM_REGULATOR
Taniya Dasbae99fb2011-10-12 09:55:13 +0530[diff] [blame]60 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]61 select MSM_PM2 if PM
Chintan Pandyabb021762012-06-21 15:03:29 +0530[diff] [blame]62 select HOLES_IN_ZONE if SPARSEMEM
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]63 select MSM_MODEM_RESTART
Chintan Pandya62a2f7c2012-10-30 12:00:40 +0530[diff] [blame]64 select ARM_HAS_SG_CHAIN
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]65
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]66config ARCH_QSD8X50
67 bool "QSD8X50"
68 select ARCH_MSM_SCORPION
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]69 select MSM_VIC
70 select CPU_V7
David Brown74d10d72011-05-16 13:57:39 -0700[diff] [blame]71 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]72 select MSM_REMOTE_SPINLOCK_LDREX
73 select CPU_USE_DOMAINS
74 select EMULATE_DOMAIN_MANAGER_V7
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]75 select MSM_GPIOMUX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]76 select MSM_DALRPC
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]77 select MSM_PM2 if PM
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]78 select MSM_MODEM_RESTART
Daniel Walker46fe5f22010-08-18 11:00:25 -0700[diff] [blame]79
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]80config ARCH_MSM8X60
81 bool "MSM8X60"
Jeff Ohlsteine14411d2010-11-30 13:06:36 -0800[diff] [blame]82 select ARCH_MSM_SCORPIONMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]83 select SMP_PARALLEL_START if SMP
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]84 select ARM_GIC
85 select CPU_V7
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]86 select MSM_REMOTE_SPINLOCK_LDREX
87 select ARCH_REQUIRE_GPIOLIB
88 select MSM_ADM3
89 select REGULATOR
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]90 select MSM_RPM_REGULATOR
David Brown1a5ab4b2011-05-16 15:53:38 -0700[diff] [blame]91 select GPIO_MSM_V2
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]92 select MSM_PIL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]93 select ARCH_HAS_CPU_IDLE_WAIT
94 select MSM_DIRECT_SCLK_ACCESS
95 select MSM_RPM
96 select MSM_XO
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]97 select MSM_GPIOMUX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]98 select MSM_BUS_SCALING
99 select MSM_SECURE_IO
100 select MSM_DALRPC
101 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]102 select MSM_QDSP6_CODECS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]103 select MSM_NATIVE_RESTART
104 select ARCH_INLINE_SPIN_TRYLOCK
105 select ARCH_INLINE_SPIN_TRYLOCK_BH
106 select ARCH_INLINE_SPIN_LOCK
107 select ARCH_INLINE_SPIN_LOCK_BH
108 select ARCH_INLINE_SPIN_LOCK_IRQ
109 select ARCH_INLINE_SPIN_LOCK_IRQSAVE
110 select ARCH_INLINE_SPIN_UNLOCK
111 select ARCH_INLINE_SPIN_UNLOCK_BH
112 select ARCH_INLINE_SPIN_UNLOCK_IRQ
113 select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
114 select ARCH_INLINE_READ_TRYLOCK
115 select ARCH_INLINE_READ_LOCK
116 select ARCH_INLINE_READ_LOCK_BH
117 select ARCH_INLINE_READ_LOCK_IRQ
118 select ARCH_INLINE_READ_LOCK_IRQSAVE
119 select ARCH_INLINE_READ_UNLOCK
120 select ARCH_INLINE_READ_UNLOCK_BH
121 select ARCH_INLINE_READ_UNLOCK_IRQ
122 select ARCH_INLINE_READ_UNLOCK_IRQRESTORE
123 select ARCH_INLINE_WRITE_TRYLOCK
124 select ARCH_INLINE_WRITE_LOCK
125 select ARCH_INLINE_WRITE_LOCK_BH
126 select ARCH_INLINE_WRITE_LOCK_IRQ
127 select ARCH_INLINE_WRITE_LOCK_IRQSAVE
128 select ARCH_INLINE_WRITE_UNLOCK
129 select ARCH_INLINE_WRITE_UNLOCK_BH
130 select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
131 select CPU_HAS_L2_PMU
132 select MSM_SPM_V1
Stephen Boyd2a1eb582010-08-27 10:01:23 -0700[diff] [blame]133 select MSM_SCM if SMP
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]134 select MULTI_IRQ_HANDLER
Laura Abbott46505f62011-11-02 18:06:55 -0700[diff] [blame]135 select MSM_MULTIMEDIA_USE_ION
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]136 select MSM_PM8X60 if PM
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]137 select MSM_RUN_QUEUE_STATS
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]138 select ARM_HAS_SG_CHAIN
Sidipotu Ashokbf84d4d2012-11-06 17:13:28 +0530[diff] [blame]139 select USE_DEV_CTRL_VOLUME
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]140
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]141config ARCH_MSM8960
142 bool "MSM8960"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]143 select ARCH_MSM_KRAITMP
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]144 select ARM_GIC
145 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]146 select GPIO_MSM_V2
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]147 select MSM_GPIOMUX
148 select MSM_SCM if SMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]149 select MSM_DIRECT_SCLK_ACCESS
150 select REGULATOR
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]151 select MSM_RPM_REGULATOR
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]152 select MSM_RPM
153 select MSM_XO
154 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]155 select MSM_QDSP6_CODECS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]156 select MSM_PIL
157 select MSM_AUDIO_QDSP6 if SND_SOC
158 select CPU_HAS_L2_PMU
159 select MSM_SPM_V2
160 select MSM_L2_SPM
161 select MSM_NATIVE_RESTART
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]162 select DONT_MAP_HOLE_AFTER_MEMBANK0
163 select MSM_REMOTE_SPINLOCK_SFPB
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]164 select ARCH_HAS_HOLES_MEMORYMODEL
Larry Basseld4d82c92011-12-07 09:52:49 -0800[diff] [blame]165 select CLEANCACHE
166 select QCACHE
Laura Abbott6d61a912011-10-27 16:44:14 -0700[diff] [blame]167 select MSM_MULTIMEDIA_USE_ION
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]168 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]169 select MSM_PM8X60 if PM
Laura Abbott085dd202012-03-30 14:02:34 -0700[diff] [blame]170 select HOLES_IN_ZONE if SPARSEMEM
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]171 select MSM_RUN_QUEUE_STATS
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]172 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]173 select MSM_KRAIT_WFE_FIXUP
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]174 select MSM_ULTRASOUND_A
Olav Haugan5e728722012-11-05 17:45:26 -0800[diff] [blame]175 select MSM_IOMMU_GPU_SYNC
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]176 select GENERIC_TIME_VSYSCALL
177 select USE_USER_ACCESSIBLE_TIMERS
178 select ARM_USE_USER_ACCESSIBLE_TIMERS
179 select MSM_USE_USER_ACCESSIBLE_TIMERS
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]180 select MSM_CPU_PWRCTL
Priyanka Mathurdcaaaa9f2012-12-05 18:51:03 -0800[diff] [blame]181 select MSM_LPM_TEST
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]182
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]183config ARCH_MSM8930
184 bool "MSM8930"
185 select ARCH_MSM_KRAITMP
186 select ARM_GIC
187 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]188 select GPIO_MSM_V2
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]189 select MSM_GPIOMUX
190 select MSM_SCM if SMP
191 select MSM_DIRECT_SCLK_ACCESS
192 select REGULATOR
David Collins5779cea2012-01-05 15:09:21 -0800[diff] [blame]193 select MSM_RPM_REGULATOR
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]194 select MSM_RPM
195 select MSM_XO
196 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]197 select MSM_QDSP6_CODECS
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]198 select MSM_PIL
199 select MSM_AUDIO_QDSP6 if SND_SOC
200 select CPU_HAS_L2_PMU
201 select MSM_SPM_V2
202 select MSM_L2_SPM
203 select MSM_NATIVE_RESTART
204 select DONT_MAP_HOLE_AFTER_MEMBANK0
Eric Holmbergeab10732011-09-23 19:44:43 -0600[diff] [blame]205 select MSM_REMOTE_SPINLOCK_SFPB
Larry Basself74479e2011-09-08 11:07:52 -0700[diff] [blame]206 select ARCH_HAS_HOLES_MEMORYMODEL
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]207 select MSM_ULTRASOUND_A
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]208 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]209 select MSM_PM8X60 if PM
Laura Abbott085dd202012-03-30 14:02:34 -0700[diff] [blame]210 select HOLES_IN_ZONE if SPARSEMEM
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]211 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]212 select MSM_KRAIT_WFE_FIXUP
Olav Haugan5e728722012-11-05 17:45:26 -0800[diff] [blame]213 select MSM_IOMMU_GPU_SYNC
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]214 select GENERIC_TIME_VSYSCALL
215 select USE_USER_ACCESSIBLE_TIMERS
216 select ARM_USE_USER_ACCESSIBLE_TIMERS
217 select MSM_USE_USER_ACCESSIBLE_TIMERS
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]218 select MSM_CPU_PWRCTL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]219
220config ARCH_APQ8064
221 bool "APQ8064"
222 select ARCH_MSM_KRAITMP
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]223 select GPIO_MSM_V2
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]224 select ARM_GIC
225 select CPU_V7
226 select MSM_SCM if SMP
Joel King4ebccc62011-07-22 09:43:22 -0700[diff] [blame]227 select MSM_GPIOMUX
Eric Holmberg40d21882011-09-27 09:42:03 -0600[diff] [blame]228 select MSM_REMOTE_SPINLOCK_SFPB
Swaminathan Sathappan47e5d932011-12-05 14:48:07 -0800[diff] [blame]229 select MSM_PIL
Swaminathan Sathappan2f51a752011-12-05 12:51:19 -0800[diff] [blame]230 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]231 select MSM_QDSP6_CODECS
Swaminathan Sathappan2f51a752011-12-05 12:51:19 -0800[diff] [blame]232 select MSM_AUDIO_QDSP6 if SND_SOC
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]233 select MULTI_IRQ_HANDLER
Praveen Chidambaram78499012011-11-01 17:15:17 -0600[diff] [blame]234 select MSM_RPM
235 select MSM_SPM_V2
236 select MSM_L2_SPM
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]237 select MSM_PM8X60 if PM
Neil Leeder814d3d32012-01-19 17:21:43 -0500[diff] [blame]238 select CPU_HAS_L2_PMU
Laura Abbott085dd202012-03-30 14:02:34 -0700[diff] [blame]239 select HOLES_IN_ZONE if SPARSEMEM
Larry Bassel67b921d2012-04-06 10:23:27 -0700[diff] [blame]240 select CLEANCACHE
241 select QCACHE
Niranjana Vishwanathapuraf1427ac2012-05-03 14:28:21 -0600[diff] [blame]242 select MIGHT_HAVE_PCI
243 select ARCH_SUPPORTS_MSI
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]244 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]245 select MSM_KRAIT_WFE_FIXUP
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]246 select MSM_ULTRASOUND_A
Olav Haugan5e728722012-11-05 17:45:26 -0800[diff] [blame]247 select MSM_IOMMU_GPU_SYNC
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]248 select GENERIC_TIME_VSYSCALL
249 select USE_USER_ACCESSIBLE_TIMERS
250 select ARM_USE_USER_ACCESSIBLE_TIMERS
251 select MSM_USE_USER_ACCESSIBLE_TIMERS
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]252 select MSM_CPU_PWRCTL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]253
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]254config ARCH_MSM8974
255 bool "MSM8974"
Sathish Ambleyd4efc762011-10-09 22:19:22 -0700[diff] [blame]256 select ARCH_MSM_KRAITMP
Sathish Ambley4149e842012-03-23 11:53:55 -0700[diff] [blame]257 select GPIO_MSM_V3
Sathish Ambleyd4efc762011-10-09 22:19:22 -0700[diff] [blame]258 select ARM_GIC
259 select CPU_V7
260 select MSM_SCM if SMP
261 select MSM_GPIOMUX
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]262 select MULTI_IRQ_HANDLER
Olav Hauganb800c8c2012-01-30 08:50:45 -0800[diff] [blame]263 select MSM_MULTIMEDIA_USE_ION
Matt Wagantallc2bbdc32012-03-21 19:44:50 -0700[diff] [blame]264 select MSM_PIL
Praveen Chidambaramaa9d52b2012-04-02 11:09:47 -0600[diff] [blame]265 select MSM_SPM_V2
266 select MSM_L2_SPM
Stepan Moskovchenkoa000d132012-08-14 21:05:14 -0700[diff] [blame]267 select MSM_NATIVE_RESTART
268 select MSM_RESTART_V2
Praveen Chidambaram85b7b282012-04-16 13:45:15 -0600[diff] [blame]269 select MSM_PM8X60 if PM
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]270 select MAY_HAVE_SPARSE_IRQ
271 select SPARSE_IRQ
Mahesh Sivasubramaniancb668712012-04-04 13:03:25 -0600[diff] [blame]272 select MSM_RPM_SMD
David Collinsc7642322012-04-04 10:19:12 -0700[diff] [blame]273 select REGULATOR
Joonwoo Park91d95462012-08-02 10:55:54 -0700[diff] [blame]274 select MSM_QDSP6_APRV2
Harmandeep Singhe5ddfe32012-05-26 09:39:25 -0700[diff] [blame]275 select MSM_QDSP6V2_CODECS
276 select MSM_AUDIO_QDSP6V2 if SND_SOC
David Collins1c91ea72012-05-03 16:17:35 -0700[diff] [blame]277 select MSM_RPM_REGULATOR_SMD
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]278 select ARM_HAS_SG_CHAIN
Karthik Parsha404fb8f2012-07-30 19:14:05 -0700[diff] [blame]279 select MSM_RUN_QUEUE_STATS
Neeti Desai92eab922012-10-22 15:14:48 -0700[diff] [blame]280 select MEMORY_HOLE_CARVEOUT
Priyanka Mathur1af9d4b2012-10-30 14:55:44 -0700[diff] [blame]281 select MSM_RPM_STATS_LOG
Karthikeyan Ramasubramanian1edce9e2012-11-08 18:26:10 -0700[diff] [blame]282 select QMI_ENCDEC
Neeti Desai1b2cb552012-11-01 21:57:36 -0700[diff] [blame]283 select DONT_MAP_HOLE_AFTER_MEMBANK0
Naveen Ramarajf56e9af2012-12-10 17:07:38 -0800[diff] [blame]284 select SENSORS_ADSP
Baruch Eruchimovitch8c3f7802013-01-05 22:48:04 +0200[diff] [blame]285 select MSM_ULTRASOUND_B
Priyanka Mathur5d5b0a82013-01-17 10:54:29 -0800[diff] [blame]286 select MSM_LPM_TEST
Priyanka Mathur94abc462012-12-11 16:34:52 -0800[diff] [blame]287 select MSM_RPM_LOG
Sathish Ambleyd4efc762011-10-09 22:19:22 -0700[diff] [blame]288
Stepan Moskovchenkob6ae7882013-01-24 15:47:18 -0800[diff] [blame]289config ARCH_MSMZINC
290 bool "MSMZINC"
291 select ARCH_MSM_KRAITMP
292 select GPIO_MSM_V3
293 select ARM_GIC
294 select CPU_V7
295 select MSM_SCM if SMP
296 select MSM_GPIOMUX
297 select MULTI_IRQ_HANDLER
298 select MSM_NATIVE_RESTART
299 select MSM_RESTART_V2
300 select MSM_PM8X60 if PM
301 select MAY_HAVE_SPARSE_IRQ
302 select SPARSE_IRQ
303 select REGULATOR
304 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko3a5ae972013-03-08 16:46:29 -0800[diff] [blame]305 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
Stepan Moskovchenkob6ae7882013-01-24 15:47:18 -0800[diff] [blame]306
Ravi Kumar Vb31dbba2012-08-31 22:40:22 +0530[diff] [blame]307config ARCH_MPQ8092
308 bool "MPQ8092"
309 select ARCH_MSM_KRAITMP
310 select GPIO_MSM_V3
311 select ARM_GIC
312 select MULTI_IRQ_HANDLER
313 select CPU_V7
314 select MSM_GPIOMUX
315 select MAY_HAVE_SPARSE_IRQ
316 select SPARSE_IRQ
317 select MSM_NOPM
318
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]319config ARCH_FSM9XXX
320 bool "FSM9XXX"
321 select ARCH_MSM_SCORPION
322 select MSM_VIC
323 select CPU_V7
324 select MSM_REMOTE_SPINLOCK_LDREX
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]325 select GPIO_FSM9XXX
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]326 select MULTI_IRQ_HANDLER
Bryan Huntsman18b3c0c2011-11-23 15:12:58 -0800[diff] [blame]327 select MSM_DALRPC
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]328
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]329config ARCH_MSM9615
330 bool "MSM9615"
331 select ARM_GIC
Taniya Dasb241bd82012-03-19 17:58:06 +0530[diff] [blame]332 select GIC_SECURE
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]333 select ARCH_MSM_CORTEX_A5
334 select CPU_V7
Rohit Vaswani4307c842012-10-11 15:50:05 -0700[diff] [blame]335 select MIGHT_HAVE_CACHE_L2X0
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]336 select GPIO_MSM_V2
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]337 select MSM_GPIOMUX
Praveen Chidambaramab3b1c42011-08-25 08:44:05 -0600[diff] [blame]338 select MSM_RPM
Maheshkumar Sivasubramanian738b4582011-09-06 17:26:24 -0600[diff] [blame]339 select MSM_SPM_V2
Rohit Vaswanif688fa62011-10-13 18:13:10 -0700[diff] [blame]340 select MSM_NATIVE_RESTART
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]341 select REGULATOR
342 select MSM_RPM_REGULATOR
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]343 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]344 select MSM_PM8X60 if PM
Vikram Mulukutla2021c002011-12-16 12:32:59 -0800[diff] [blame]345 select MSM_XO
Olav Haugane6a0acd2012-04-05 09:29:12 -0700[diff] [blame]346 select MSM_MULTIMEDIA_USE_ION
Shiv Maliyappanahalli9ec55e92012-01-09 14:44:59 -0800[diff] [blame]347 select MSM_QDSP6_APR
348 select MSM_AUDIO_QDSP6 if SND_SOC
Rohit Vaswaniead426f2012-01-05 20:24:52 -0800[diff] [blame]349 select FIQ
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]350 select ARM_HAS_SG_CHAIN
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]351
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]352config ARCH_MSM8625
353 bool "MSM8625"
354 select ARCH_MSM_CORTEX_A5
355 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]356 select GPIO_MSM_V1
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]357 select MSM_GPIOMUX
358 select ARM_GIC
359 select ARCH_MSM_CORTEXMP
360 select MULTI_IRQ_HANDLER
Trilok Soni3a453992012-03-06 18:46:22 +0530[diff] [blame]361 select ARM_TICKET_LOCKS
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]362 select MSM_RUN_QUEUE_STATS
Trilok Sonib856ab92012-06-26 14:33:28 +0530[diff] [blame]363 select MIGHT_HAVE_CACHE_L2X0
Chintan Pandya3544e742012-08-30 19:39:59 +0530[diff] [blame]364 select ARM_HAS_SG_CHAIN
Ashwin Chaugule3deb6b82012-12-21 13:09:48 -0500[diff] [blame]365 select CPU_HAS_L2_PMU
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]366
367config ARCH_MSM9625
368 bool "MSM9625"
369 select ARM_GIC
Abhimanyu Kapur490d20c2012-06-22 17:34:20 -0700[diff] [blame]370 select MIGHT_HAVE_CACHE_L2X0
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]371 select ARCH_MSM_CORTEX_A5
372 select SMP
373 select MSM_SMP
374 select CPU_V7
Abhimanyu Kapur4bb38622012-10-16 19:07:48 -0700[diff] [blame]375 select MSM_SCM if SMP
Jin Hong690e3352012-05-02 09:25:05 -0700[diff] [blame]376 select MSM_GPIOMUX
Girish Mahadevanf1c20a42012-09-19 11:44:36 -0600[diff] [blame]377 select MSM_RPM_SMD
Abhimanyu Kapur46e5e2b2012-10-02 20:45:37 -0700[diff] [blame]378 select MSM_NATIVE_RESTART
379 select MSM_RESTART_V2
Girish Mahadevan6e419562012-09-19 12:50:05 -0600[diff] [blame]380 select MSM_SPM_V2
381 select MSM_PM8X60 if PM
382 select MSM_SCM if SMP
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]383 select MULTI_IRQ_HANDLER
Rohit Vaswani61cf6ef2012-07-27 13:51:48 -0700[diff] [blame]384 select GPIO_MSM_V3
David Collins1cc6e402012-09-17 16:02:24 -0700[diff] [blame]385 select MAY_HAVE_SPARSE_IRQ
386 select SPARSE_IRQ
Mitchel Humpherys92e9b8a2012-10-08 18:12:47 -0700[diff] [blame]387 select MSM_MULTIMEDIA_USE_ION
Girish Mahadevane3be9302012-11-07 16:21:52 -0700[diff] [blame]388 select MSM_RPM_STATS_LOG
Venkat Sudhir0620e982012-11-15 16:04:36 -0800[diff] [blame]389 select MSM_QDSP6_APRV2
390 select MSM_QDSP6V2_CODECS
391 select MSM_AUDIO_QDSP6V2 if SND_SOC
Ashwin Chaugule8b459cc2012-11-26 15:20:54 -0500[diff] [blame]392 select CPU_HAS_L2_PMU
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]393 select MSM_JTAG_MM if CORESIGHT_ETM
Neeti Desai5f3b0312012-11-07 11:20:03 -0800[diff] [blame]394 select MEMORY_HOLE_CARVEOUT
Priyanka Mathurdc424552013-02-22 16:30:53 -0800[diff] [blame]395 select MSM_RPM_LOG
Syed Rameez Mustafa9232e5b2012-09-21 18:22:49 -0700[diff] [blame]396
Syed Rameez Mustafa3971c142013-01-09 19:04:53 -0800[diff] [blame]397config ARCH_MSM8610
398 bool "MSM8610"
Syed Rameez Mustafa9232e5b2012-09-21 18:22:49 -0700[diff] [blame]399 select ARM_GIC
400 select GIC_SECURE
Syed Rameez Mustafa9232e5b2012-09-21 18:22:49 -0700[diff] [blame]401 select ARCH_MSM_CORTEXMP
402 select CPU_V7
403 select MSM_SCM if SMP
404 select MAY_HAVE_SPARSE_IRQ
405 select SPARSE_IRQ
406 select MULTI_IRQ_HANDLER
407 select GPIO_MSM_V3
408 select MSM_GPIOMUX
Hanumant Singhe4271312012-10-24 13:27:57 -0700[diff] [blame]409 select MSM_NATIVE_RESTART
410 select MSM_RESTART_V2
Arun Menon7d2f1732013-01-16 15:20:56 -0800[diff] [blame]411 select MSM_QDSP6_APRV2
412 select MSM_QDSP6V2_CODECS
413 select MSM_AUDIO_QDSP6V2 if SND_SOC
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]414 select QMI_ENCDEC
Praveen Chidambaramee7b1652012-11-29 09:52:53 -0700[diff] [blame]415 select MSM_RPM_SMD
416 select MSM_SPM_V2
417 select MSM_L2_SPM
418 select MSM_PM8X60 if PM
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]419 select MEMORY_HOLE_CARVEOUT
420 select DONT_MAP_HOLE_AFTER_MEMBANK0
421 select MSM_BUS_SCALING
Patrick Dalyd3ad9ff2012-11-06 11:07:27 -0800[diff] [blame]422 select CPU_FREQ_MSM
423 select CPU_FREQ
424 select CPU_FREQ_GOV_USERSPACE
425 select CPU_FREQ_GOV_ONDEMAND
Patrick Daly9e3fca92013-01-30 13:53:57 -0800[diff] [blame]426 select MSM_PIL
Siddharth Vermaead71842013-02-27 14:25:27 -0800[diff] [blame]427 select MSM_RUN_QUEUE_STATS
Mitchel Humpherys3537e672013-03-04 20:21:19 -0800[diff] [blame]428 select ARM_HAS_SG_CHAIN
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]429 select REGULATOR
430 select MSM_RPM_REGULATOR_SMD
Syed Rameez Mustafa9ee80102012-11-02 14:41:04 -0700[diff] [blame]431
432config ARCH_MSM8226
433 bool "MSM8226"
434 select ARM_GIC
435 select GIC_SECURE
Syed Rameez Mustafa9ee80102012-11-02 14:41:04 -0700[diff] [blame]436 select ARCH_MSM_CORTEXMP
437 select CPU_V7
438 select MSM_SCM if SMP
439 select MAY_HAVE_SPARSE_IRQ
440 select SPARSE_IRQ
441 select MULTI_IRQ_HANDLER
442 select GPIO_MSM_V3
443 select MSM_GPIOMUX
Syed Rameez Mustafaf1bdd712012-11-20 14:56:44 -0800[diff] [blame]444 select MSM_NATIVE_RESTART
445 select MSM_RESTART_V2
Bhalchandra Gajare4e08f632012-12-18 11:54:35 -0800[diff] [blame]446 select MSM_QDSP6_APRV2
447 select MSM_QDSP6V2_CODECS
448 select MSM_AUDIO_QDSP6V2 if SND_SOC
Karthikeyan Ramasubramaniand04c8652013-01-16 09:03:51 -0700[diff] [blame]449 select QMI_ENCDEC
Praveen Chidambarama06f60d2012-11-29 09:52:53 -0700[diff] [blame]450 select MSM_RPM_SMD
451 select MSM_SPM_V2
452 select MSM_L2_SPM
453 select MSM_PM8X60 if PM
Neeti Desaibfedbd32012-11-21 13:19:36 -0800[diff] [blame]454 select MEMORY_HOLE_CARVEOUT
455 select DONT_MAP_HOLE_AFTER_MEMBANK0
Gagan Mace1ec9522013-02-01 12:10:21 -0700[diff] [blame]456 select MSM_BUS_SCALING
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]457 select CPU_FREQ_MSM
458 select CPU_FREQ
459 select CPU_FREQ_GOV_USERSPACE
460 select CPU_FREQ_GOV_ONDEMAND
461 select MSM_PIL
462 select MSM_RUN_QUEUE_STATS
Mitchel Humpherys3537e672013-03-04 20:21:19 -0800[diff] [blame]463 select ARM_HAS_SG_CHAIN
David Keitelc0092e12013-03-07 12:09:48 -0800[diff] [blame]464 select REGULATOR
465 select MSM_RPM_REGULATOR_SMD
Pushkar Joshi1bea8372013-03-06 18:26:37 -0800[diff] [blame]466 select MSM_JTAG_MM if CORESIGHT_ETM
Stepan Moskovchenko1cd286f2011-08-03 19:03:02 -0700[diff] [blame]467endmenu
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]468
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]469choice
470 prompt "MSM SoC Revision"
471 default MSM_SOC_REV_NONE
472config MSM_SOC_REV_NONE
473 bool "N/A"
474 select EMULATE_DOMAIN_MANAGER_V7 if ARCH_QSD8X50
475 select VERIFY_PERMISSION_FAULT if ARCH_QSD8X50
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]476config MSM_SOC_REV_A
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]477 bool "Rev. A"
478 select ARCH_MSM7X27A if ARCH_MSM7X27
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]479endchoice
480
Stepan Moskovchenko00da0742011-07-08 14:06:44 -0700[diff] [blame]481config MSM_KRAIT_TBB_ABORT_HANDLER
482 bool "Krait TBB/TBH data abort handler"
483 depends on ARCH_MSM_KRAIT
484 depends on ARM_THUMB
485 help
486 Certain early samples of the Krait processor may generate data
487 aborts for TBB / TBH instructions that fail their condition code
488 checks. Enabling this option will ignore these erroneous data aborts,
489 at the expense of a very small performance penalty.
Stephen Boyda3d3ef92011-11-08 10:33:04 -0800[diff] [blame]490
Stepan Moskovchenko00da0742011-07-08 14:06:44 -0700[diff] [blame]491 If unsure, say N.
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]492
493config ARCH_MSM_ARM11
494 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]495
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]496config ARCH_MSM_SCORPION
497 bool
498
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]499config ARCH_MSM_KRAIT
Daniel Walker46fe5f22010-08-18 11:00:25 -0700[diff] [blame]500 bool
Stephen Boyd51cabbe2011-12-02 13:28:56 -0800[diff] [blame]501 select ARM_L1_CACHE_SHIFT_6
Daniel Walker46fe5f22010-08-18 11:00:25 -0700[diff] [blame]502
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]503config MSM_SMP
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]504 select HAVE_SMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]505 bool
506
507config ARCH_MSM_SCORPIONMP
508 select ARCH_MSM_SCORPION
509 select MSM_SMP
Taniya Dasc43e6872012-03-21 16:41:14 +0530[diff] [blame]510 select HAVE_ARCH_HAS_CURRENT_TIMER
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]511 select MSM_JTAG if CORESIGHT_ETM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]512 bool
513
514config ARCH_MSM_KRAITMP
515 select ARCH_MSM_KRAIT
516 select MSM_SMP
Taniya Dasc43e6872012-03-21 16:41:14 +0530[diff] [blame]517 select HAVE_ARCH_HAS_CURRENT_TIMER
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]518 select MSM_JTAG if CORESIGHT_ETM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]519 bool
520
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]521config ARCH_MSM_CORTEXMP
522 select MSM_SMP
523 bool
524
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]525config MSM_KRAIT_WFE_FIXUP
526 bool
527
Stepan Moskovchenkoa000d132012-08-14 21:05:14 -0700[diff] [blame]528config MSM_RESTART_V2
529 bool
530
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]531config ARCH_MSM_CORTEX_A5
Bryan Huntsman239ef1e2011-11-23 15:09:13 -0800[diff] [blame]532 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]533
534config ARCH_MSM7X27A
535 bool
536 select MSM_DALRPC
Justin Pauporeb3a33b72011-08-23 15:30:32 -0700[diff] [blame]537 select MSM_PROC_COMM_REGULATOR
Taniya Das86e0e132011-10-19 11:32:00 +0530[diff] [blame]538 select MULTI_IRQ_HANDLER
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]539 select ARM_GIC
540 select ARCH_MSM_CORTEXMP
Trilok Sonib856ab92012-06-26 14:33:28 +0530[diff] [blame]541 select MIGHT_HAVE_CACHE_L2X0
Chintan Pandya3544e742012-08-30 19:39:59 +0530[diff] [blame]542 select ARM_HAS_SG_CHAIN
Ashwin Chaugule3deb6b82012-12-21 13:09:48 -0500[diff] [blame]543 select CPU_HAS_L2_PMU
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]544
Gregory Beanf9f3d312010-04-30 22:06:50 -0700[diff] [blame]545config MSM_VIC
546 bool
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]547
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]548config MSM_RPM
549 bool "Resource Power Manager"
550 select MSM_MPM
551
Mahesh Sivasubramaniana8ff9922012-03-27 17:50:42 -0600[diff] [blame]552config MSM_RPM_SMD
553 depends on MSM_SMD
Mahesh Sivasubramanian102e5962012-06-20 13:12:11 -0600[diff] [blame]554 select MSM_MPM_OF
555 bool "RPM driver using SMD protocol"
556 help
557 RPM is the dedicated hardware engine for managing shared SoC
558 resources. This config adds driver support for using SMD as a
559 transport layer communication with RPM hardware. It also selects
560 the MSM_MPM config that programs the MPM module to monitor interrupts
561 during sleep modes.
Mahesh Sivasubramaniana8ff9922012-03-27 17:50:42 -0600[diff] [blame]562
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]563config MSM_MPM
564 bool "Modem Power Manager"
Mahesh Sivasubramanian102e5962012-06-20 13:12:11 -0600[diff] [blame]565 help
566 MPM is a dedicated hardware resource responsible for entering and
567 waking up from a system wide low power mode. The MPM driver tracks
568 the wakeup interrupts and configures the MPM to monitor the wakeup
569 interrupts when going to a system wide sleep mode.
570
571config MSM_MPM_OF
572 bool "Modem Power Manager"
Subbaraman Narayanamurthy0b148fc2012-11-28 12:14:12 -0800[diff] [blame]573 depends on OF
Mahesh Sivasubramanian102e5962012-06-20 13:12:11 -0600[diff] [blame]574 help
575 MPM is a dedicated hardware resource responsible for entering and
576 waking up from a system wide low power mode. The MPM driver tracks
577 the wakeup interrupts and configures the MPM to monitor the wakeup
578 interrupts when going to a system wide sleep mode. This config option
579 enables the MPM driver that supports initialization from a device
580 tree
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]581
Priyanka Mathur9a75ec52012-12-07 16:02:40 -0800[diff] [blame]582config MSM_LPM_TEST
583 bool "Low Power Mode test framework"
Priyanka Mathur3abfd442013-01-11 12:58:51 -0800[diff] [blame]584 depends on MSM_RPM || MSM_RPM_SMD
Priyanka Mathur9a75ec52012-12-07 16:02:40 -0800[diff] [blame]585 depends on MSM_PM8X60
586 help
587 LPM_TEST is a test framework that assists in exercising the low
588 power mode algorithm on MSM targets. This test framework tracks
589 notifications sent during entry/exit of the low power modes and
590 processes them to measure various stats including latency
591 measurement.
592
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]593config MSM_XO
594 bool
595
596config MSM_REMOTE_SPINLOCK_DEKKERS
597 bool
598config MSM_REMOTE_SPINLOCK_SWP
599 bool
600config MSM_REMOTE_SPINLOCK_LDREX
601 bool
Eric Holmbergeab10732011-09-23 19:44:43 -0600[diff] [blame]602config MSM_REMOTE_SPINLOCK_SFPB
603 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]604config MSM_ADM3
605 bool
606
607menu "MSM Board Selection"
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]608
609config MACH_HALIBUT
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]610 depends on ARCH_MSM7X01A
611 depends on MSM_STACKED_MEMORY
612 default y
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]613 bool "Halibut Board (QCT SURF7201A)"
614 help
615 Support for the Qualcomm SURF7201A eval board.
616
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]617config MACH_MSM7201A_SURF
618 depends on ARCH_MSM7X01A
619 depends on MSM_STACKED_MEMORY
620 default y
621 bool "MSM7201A SURF"
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]622 help
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]623 Support for the Qualcomm MSM7201A SURF eval board.
624
625config MACH_MSM7201A_FFA
626 depends on ARCH_MSM7X01A
627 depends on MSM_STACKED_MEMORY
628 default y
629 bool "MSM7201A FFA"
630 help
631 Support for the Qualcomm MSM7201A FFA eval board.
632
633config MACH_TROUT
634 depends on ARCH_MSM7X01A
635 depends on MSM_STACKED_MEMORY
636 default y
637 bool "Trout"
638
639config MACH_MSM7X27_SURF
640 depends on ARCH_MSM7X27
641 depends on !MSM_STACKED_MEMORY
642 default y
643 bool "MSM7x27 SURF"
644 help
645 Support for the Qualcomm MSM7x27 SURF eval board.
646
647config MACH_MSM7X27_FFA
648 depends on ARCH_MSM7X27
649 depends on !MSM_STACKED_MEMORY
650 default y
651 bool "MSM7x27 FFA"
652 help
653 Support for the Qualcomm MSM7x27 FFA eval board.
654
655config MACH_MSM7X27A_RUMI3
656 depends on ARCH_MSM7X27A
657 depends on !MSM_STACKED_MEMORY
658 default y
659 bool "MSM7x27A RUMI3"
660 help
661 Support for the Qualcomm MSM7x27A RUMI3 Emulation Platform.
662
663config MACH_MSM7X27A_SURF
664 depends on ARCH_MSM7X27A
665 depends on !MSM_STACKED_MEMORY
666 default y
667 bool "MSM7x27A SURF"
668 help
669 Support for the Qualcomm MSM7x27A SURF.
670
671config MACH_MSM7X27A_FFA
672 depends on ARCH_MSM7X27A
673 depends on !MSM_STACKED_MEMORY
674 default y
675 bool "MSM7x27A FFA"
676 help
677 Support for the Qualcomm MSM7x27A FFA.
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]678
Trilok Soni3d0f6c52011-07-26 16:06:58 +0530[diff] [blame]679config MACH_MSM7625A_SURF
680 depends on ARCH_MSM7X27A
681 depends on !MSM_STACKED_MEMORY
682 default y
683 bool "MSM7625A SURF"
684 help
685 Support for the Qualcomm MSM7625A SURF.
686
687config MACH_MSM7625A_FFA
688 depends on ARCH_MSM7X27A
689 depends on !MSM_STACKED_MEMORY
690 default y
691 bool "MSM7625A FFA"
692 help
693 Support for the Qualcomm MSM7625A FFA.
694
Taniya Dasc98bfbc2011-08-23 09:58:55 +0530[diff] [blame]695config MACH_MSM7627A_QRD1
696 depends on ARCH_MSM7X27A
697 depends on !MSM_STACKED_MEMORY
698 default y
699 bool "MSM7627A QRD1"
700 help
Chintan Pandyab1bad0e2012-02-06 19:04:51 +0530[diff] [blame]701 Support for the Qualcomm MSM7627A Reference Design.
702
703config MACH_MSM7627A_QRD3
704 depends on ARCH_MSM7X27A
705 depends on !MSM_STACKED_MEMORY
706 default y
707 bool "MSM7627A QRD3"
708 help
709 Support for the Qualcomm MSM7627A Reference Design.
Taniya Dasc98bfbc2011-08-23 09:58:55 +0530[diff] [blame]710
Taniya Dasc868a2e2012-01-03 10:18:47 +0530[diff] [blame]711config MACH_MSM7627A_EVB
712 depends on ARCH_MSM7X27A
713 depends on !MSM_STACKED_MEMORY
714 default y
715 bool "MSM7627A EVB"
716 help
717 Support for the Qualcomm MSM7627A Reference Design.
718
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]719config MACH_MSM8625_RUMI3
720 depends on ARCH_MSM8625
721 depends on !MSM_STACKED_MEMORY
722 default y
723 bool "MSM8625 RUMI3"
724 help
725 Support for the Qualcomm MSM8625 RUMI3 Emulation Platform.
726
Taniya Dase3027e22012-02-27 16:32:27 +0530[diff] [blame]727config MACH_MSM8625_SURF
728 depends on ARCH_MSM8625
729 depends on !MSM_STACKED_MEMORY
730 default y
731 bool "MSM8625 SURF"
732 help
733 Support for the Qualcomm MSM8625 SURF.
734
Aparna Mallavarapu9f000a72012-04-20 15:37:57 +0530[diff] [blame]735config MACH_MSM8625_FFA
736 depends on ARCH_MSM8625
737 depends on !MSM_STACKED_MEMORY
738 default y
739 bool "MSM8625 FFA"
740 help
741 Support for the Qualcomm MSM8625 FFA.
742
Chintan Pandyaf4ad4002012-02-28 19:49:03 +0530[diff] [blame]743config MACH_MSM8625_EVB
744 depends on ARCH_MSM8625
745 depends on !MSM_STACKED_MEMORY
746 default y
747 bool "MSM8625 EVB"
748 help
749 Support for the Qualcomm MSM8625 Reference Design.
750
Taniya Dasbd096542012-03-15 17:43:45 +0530[diff] [blame]751config MACH_MSM8625_QRD7
752 depends on ARCH_MSM8625
753 depends on !MSM_STACKED_MEMORY
754 default y
755 bool "MSM8625 QRD7"
756 help
757 Support for the Qualcomm MSM8625 Reference Design.
758
Aparna Mallavarapu5a326242012-05-09 19:49:02 +0530[diff] [blame]759config MACH_MSM8625_EVT
760 depends on ARCH_MSM8625
761 depends on !MSM_STACKED_MEMORY
762 default y
763 bool "MSM8625 EVT"
764 help
765 Support for the Qualcomm MSM8625 Reference Design.
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]766
Channagoud Kadabi2bd65c82012-10-12 15:14:23 +0530[diff] [blame]767config MACH_QRD_SKUD_PRIME
768 depends on ARCH_MSM8625
769 depends on !MSM_STACKED_MEMORY
770 default y
771 bool "MSM8625 SKUD PRIME"
772 help
773 Support for the Qualcomm MSM8625 SKUD prime Reference Design.
774 Add support for a SKUD prime reference design based on MSM8x25
775 chipset. This device is much closer to a phone than regular form
776 factor devices, with new touch, display panel and other hardware
777 configurations.
778
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]779config MACH_MSM7X30_SURF
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]780 depends on ARCH_MSM7X30
781 depends on !MSM_STACKED_MEMORY
782 default y
783 bool "MSM7x30 SURF"
784 help
785 Support for the Qualcomm MSM7x30 SURF eval board.
786
787config MACH_MSM7X30_FFA
788 depends on ARCH_MSM7X30
789 depends on !MSM_STACKED_MEMORY
790 default y
791 bool "MSM7x30 FFA"
792 help
793 Support for the Qualcomm MSM7x30 FFA eval board.
794
795config MACH_MSM7X30_FLUID
796 depends on ARCH_MSM7X30
797 depends on !MSM_STACKED_MEMORY
798 default y
799 bool "MSM7x30 FLUID"
800 help
801 Support for the Qualcomm MSM7x30 FLUID eval board.
802
803config MACH_SAPPHIRE
804 depends on ARCH_MSM7X01A
805 default n
806 bool "Sapphire"
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]807
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]808config MACH_QSD8X50_SURF
809 depends on ARCH_QSD8X50
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]810 depends on MSM_SOC_REV_NONE
811 depends on MSM_STACKED_MEMORY
812 default y
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]813 bool "QSD8x50 SURF"
814 help
815 Support for the Qualcomm QSD8x50 SURF eval board.
816
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]817config MACH_QSD8X50_FFA
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]818 depends on ARCH_QSD8X50
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]819 depends on MSM_SOC_REV_NONE
820 depends on MSM_STACKED_MEMORY
821 default y
822 bool "QSD8x50 FFA"
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]823 help
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]824 Support for the Qualcomm QSD8x50 FFA eval board.
825
826config MACH_MSM7X25_SURF
827 depends on ARCH_MSM7X25
828 depends on !MSM_STACKED_MEMORY
829 default y
830 bool "MSM7x25 SURF"
831 help
832 Support for the Qualcomm MSM7x25 SURF eval board.
833
834config MACH_MSM7X25_FFA
835 depends on ARCH_MSM7X25
836 depends on !MSM_STACKED_MEMORY
837 default y
838 bool "MSM7x25 FFA"
839 help
840 Support for the Qualcomm MSM7x25 FFA eval board.
841
842config MACH_MSM8X55_SURF
843 depends on ARCH_MSM7X30
844 depends on !MSM_STACKED_MEMORY
845 default y
846 bool "MSM8X55 SURF"
847 help
848 Support for the Qualcomm MSM8x55 SURF eval board.
849
850config MACH_MSM8X55_FFA
851 depends on ARCH_MSM7X30
852 depends on !MSM_STACKED_MEMORY
853 default y
854 bool "MSM8X55 FFA"
855 help
856 Support for the Qualcomm MSM8x55 FFA eval board.
857
858config MACH_MSM8X55_SVLTE_FFA
859 depends on ARCH_MSM7X30
860 depends on !MSM_STACKED_MEMORY
861 default y
862 bool "MSM8X55 SVLTE FFA"
863 help
864 Support for the Qualcomm MSM8x55 SVLTE FFA eval board.
865
866config MACH_MSM8X55_SVLTE_SURF
867 depends on ARCH_MSM7X30
868 depends on !MSM_STACKED_MEMORY
869 default y
870 bool "MSM8X55 SVLTE SURF"
871 help
872 Support for the Qualcomm MSM8x55 SVLTE SURF eval board.
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]873
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]874config MACH_MSM8X60_SURF
875 depends on ARCH_MSM8X60
876 default n
877 bool "MSM8x60 SURF"
878 help
879 Support for the Qualcomm MSM8x60 SURF eval board.
880
Gregory Bean69b7f6f2010-04-04 22:29:02 -0700[diff] [blame]881config MACH_MSM8X60_FFA
882 depends on ARCH_MSM8X60
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]883 default n
Gregory Bean69b7f6f2010-04-04 22:29:02 -0700[diff] [blame]884 bool "MSM8x60 FFA"
885 help
886 Support for the Qualcomm MSM8x60 FFA eval board.
887
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]888config MACH_MSM8X60_FLUID
889 depends on ARCH_MSM8X60
890 default n
891 bool "MSM8x60 FLUID"
892 help
893 Support for the Qualcomm MSM8x60 FLUID platform. The FLUID is an
894 8x60 target which has a form factor that is much closer to that
895 of a phone than other targets. It also has a new display and
896 touchscreen controller.
897
898config MACH_MSM8X60_FUSION
899 depends on ARCH_MSM8X60
900 default n
901 bool "MSM8x60 FUSION"
902 help
903 Support for the Qualcomm MSM8x60 Fusion SURF device.
904
905config MACH_MSM8X60_FUSN_FFA
906 depends on ARCH_MSM8X60
907 default n
908 bool "MSM8x60 FUSN FFA"
909 help
910 Support for the Qualcomm MSM8x60 Fusion FFA device.
911
Zhang Chang Kenef05b172011-07-27 15:28:13 -0400[diff] [blame]912config MACH_MSM8X60_DRAGON
913 depends on ARCH_MSM8X60
914 default n
915 bool "MSM8x60 DRAGON"
916 help
917 Support for the Qualcomm MSM8x60 Dragon board.
918
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]919config MACH_MSM8960_CDP
920 depends on ARCH_MSM8960
921 bool "MSM8960 CDP"
922 help
923 Support for the Qualcomm MSM8960 CDP device.
924
925config MACH_MSM8960_MTP
926 depends on ARCH_MSM8960
927 bool "MSM8960 MTP"
928 help
929 Support for the Qualcomm MSM8960 MTP device.
930
931config MACH_MSM8960_FLUID
932 depends on ARCH_MSM8960
933 bool "MSM8960 FLUID"
934 help
935 Support for the Qualcomm MSM8960 FLUID device.
936
Amir Samuelov0d1f8ae2011-07-28 11:13:58 +0300[diff] [blame]937config MACH_MSM8960_LIQUID
938 depends on ARCH_MSM8960
939 bool "MSM8960 LIQUID"
940 help
941 Support for the Qualcomm MSM8960 LIQUID device.
942
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]943config MACH_MSM8930_CDP
944 depends on ARCH_MSM8930
945 bool "MSM8930 CDP"
946 help
947 Support for the Qualcomm MSM8930 CDP device.
948
949config MACH_MSM8930_MTP
950 depends on ARCH_MSM8930
951 bool "MSM8930 MTP"
952 help
953 Support for the Qualcomm MSM8930 MTP device.
954
955config MACH_MSM8930_FLUID
956 depends on ARCH_MSM8930
957 bool "MSM8930 FLUID"
958 help
959 Support for the Qualcomm MSM8930 FLUID device.
960
Stepan Moskovchenko8768eff2011-12-01 18:55:07 -0800[diff] [blame]961config MACH_MSM8627_CDP
962 depends on ARCH_MSM8930
963 bool "MSM8627 CDP"
964 help
965 Support for the Qualcomm MSM8627 CDP device.
966
967config MACH_MSM8627_MTP
968 depends on ARCH_MSM8930
969 bool "MSM8627 MTP"
970 help
971 Support for the Qualcomm MSM8627 MTP device.
972
Rohit Vaswania8e7a832011-09-28 21:00:05 -0700[diff] [blame]973config MACH_MSM9615_CDP
974 depends on ARCH_MSM9615
975 bool "MSM9615 CDP"
976 help
977 Support for the Qualcomm MSM9615 CDP device.
978
979config MACH_MSM9615_MTP
980 depends on ARCH_MSM9615
981 bool "MSM9615 MTP"
982 help
983 Support for the Qualcomm MSM9615 MTP device.
984
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]985config MSM_USE_TSIF1
986 depends on ARCH_MSM8X60
987 bool "MSM8x60 use TSIF1"
988 help
989 Selects TSIF1 core to be used rather than TSIF0.
990 The two TSIF cores share the same DM configuration
991 so they cannot be used simultaneously.
992
Joel King82b7e3f2012-01-05 10:03:27 -0800[diff] [blame]993config MACH_APQ8064_CDP
994 depends on ARCH_APQ8064
995 bool "APQ8064 CDP"
996 help
997 Support for the Qualcomm APQ8064 CDP device.
998
Rohit Vaswani4375c802013-01-09 13:38:19 -0800[diff] [blame]999config MACH_FSM8064_EP
1000 depends on ARCH_APQ8064
1001 bool "FSM8064 EP"
1002 help
1003 Support for the Qualcomm FSM8064 EP device.
1004 This board also known as Femto development platform (FDP)
1005 is based on APQ8064 chipset. This board does not support
1006 keyboard, display or multimedia.
1007
Joel King82b7e3f2012-01-05 10:03:27 -0800[diff] [blame]1008config MACH_APQ8064_MTP
1009 depends on ARCH_APQ8064
1010 bool "APQ8064 MTP"
1011 help
1012 Support for the Qualcomm APQ8064 MTP device.
1013
1014config MACH_APQ8064_LIQUID
1015 depends on ARCH_APQ8064
1016 bool "APQ8064 LIQUID"
1017 help
1018 Support for the Qualcomm APQ8064 LIQUID device.
1019
Joel King064bbf82012-04-01 13:23:39 -0700[diff] [blame]1020config MACH_MPQ8064_CDP
1021 depends on ARCH_APQ8064
1022 bool "MPQ8064 CDP"
1023 help
1024 Support for the Qualcomm MPQ8064 CDP device.
1025
Joel King11ca8202012-02-13 16:19:03 -0800[diff] [blame]1026config MACH_MPQ8064_HRD
1027 depends on ARCH_APQ8064
1028 bool "MPQ8064 HRD"
1029 help
1030 Support for the Qualcomm MPQ8064 HRD device.
1031
1032config MACH_MPQ8064_DTV
1033 depends on ARCH_APQ8064
1034 bool "MPQ8064 DTV"
1035 help
1036 Support for the Qualcomm MPQ8064 DTV device.
1037
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1038config MACH_FSM9XXX_SURF
1039 depends on ARCH_FSM9XXX
1040 depends on !MSM_STACKED_MEMORY
1041 default y
1042 bool "FSM9XXX SURF"
1043 help
1044 Support for the Qualcomm FSM9xxx femtocell
1045 chipset based SURF evaluation board and
1046 FFA board.
1047
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]1048endmenu
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1049
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1050config MSM_STACKED_MEMORY
1051 bool "Stacked Memory"
1052 default y
Stepan Moskovchenko24f61732011-02-11 12:28:16 -0800[diff] [blame]1053 help
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1054 This option is used to indicate the presence of on-die stacked
1055 memory. When present this memory bank is used for a high speed
1056 shared memory interface. When not present regular RAM is used.
Stepan Moskovchenko24f61732011-02-11 12:28:16 -0800[diff] [blame]1057
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1058config PHYS_OFFSET
1059 hex
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]1060 default "0x40800000" if ARCH_MSM9615
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1061 default "0x80200000" if ARCH_APQ8064
1062 default "0x80200000" if ARCH_MSM8960
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]1063 default "0x80200000" if ARCH_MSM8930
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1064 default "0x00000000" if ARCH_MSM8974
Stepan Moskovchenkob6ae7882013-01-24 15:47:18 -0800[diff] [blame]1065 default "0x00000000" if ARCH_MSMZINC
Ravi Kumar Vb31dbba2012-08-31 22:40:22 +0530[diff] [blame]1066 default "0x00000000" if ARCH_MPQ8092
Syed Rameez Mustafa1c99fd32013-03-05 22:11:17 -0800[diff] [blame]1067 default "0x00000000" if ARCH_MSM8226
1068 default "0x00000000" if ARCH_MSM8610
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1069 default "0x10000000" if ARCH_FSM9XXX
Abhimanyu Kapur20ac2ad2012-09-25 04:23:59 -0700[diff] [blame]1070 default "0x00200000" if ARCH_MSM9625
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1071 default "0x00200000" if !MSM_STACKED_MEMORY
1072 default "0x00000000" if ARCH_QSD8X50 && MSM_SOC_REV_A
1073 default "0x20000000" if ARCH_QSD8X50
1074 default "0x40200000" if ARCH_MSM8X60
1075 default "0x10000000"
Stepan Moskovchenko24f61732011-02-11 12:28:16 -0800[diff] [blame]1076
Mitchel Humpherys05e58812012-08-13 14:24:13 -0700[diff] [blame]1077config KERNEL_MSM_CONTIG_MEM_REGION
1078 bool "Enable in-kernel contiguous memory region"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1079 default y if ARCH_MSM8X60
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1080 depends on ANDROID_PMEM && (ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974)
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1081 help
Mitchel Humpherys05e58812012-08-13 14:24:13 -0700[diff] [blame]1082 Enable the in-kernel contiguous memory allocator. Sets up a
1083 region of physically contiguous memory. This memory is
1084 reserved during initialization, and can be used
1085 generically.
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1086
1087config KERNEL_PMEM_SMI_REGION
1088 bool "Enable in-kernel PMEM region for SMI"
1089 default y if ARCH_MSM8X60
1090 depends on ANDROID_PMEM && ((ARCH_QSD8X50 && !PMEM_GPU0) || (ARCH_MSM8X60 && !VCM))
1091 help
1092 Enable the in-kernel PMEM allocator to use SMI memory.
1093
1094config PMEM_GPU0
1095 bool "Enable PMEM GPU0 region"
1096 default y
1097 depends on ARCH_QSD8X50 && ANDROID_PMEM
1098 help
1099 Enable the PMEM GPU0 device on SMI Memory.
1100
1101config MSM_AMSS_VERSION
1102 int
1103 default 6210 if MSM_AMSS_VERSION_6210
1104 default 6220 if MSM_AMSS_VERSION_6220
1105 default 6225 if MSM_AMSS_VERSION_6225
1106
1107choice
1108 prompt "AMSS modem firmware version"
1109
1110 default MSM_AMSS_VERSION_6225
1111
1112 config MSM_AMSS_VERSION_6210
1113 bool "6.2.10"
1114
1115 config MSM_AMSS_VERSION_6220
1116 bool "6.2.20"
1117
1118 config MSM_AMSS_VERSION_6225
1119 bool "6.2.20 + New ADSP"
1120endchoice
Stepan Moskovchenko2607b0a2010-11-15 17:46:10 -0800[diff] [blame]1121
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1122config MSM_HAS_DEBUG_UART_HS
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]1123 bool
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1124 help
1125 Say Y here if high speed MSM UART is present.
1126
1127config MSM_HAS_DEBUG_UART_HS_V14
1128 bool
1129 select MSM_HAS_DEBUG_UART_HS
1130 help
1131 Say Y here if high speed MSM UART v1.4 is present.
1132
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1133config MSM_DEBUG_UART_PHYS
1134 hex
1135 default 0xA9A00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART1
1136 default 0xACA00000 if ARCH_MSM7X30 && DEBUG_MSM_UART1
1137 default 0x94000000 if ARCH_FSM9XXX && DEBUG_MSM_UART1
1138 default 0xA9B00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART2
1139 default 0xACB00000 if ARCH_MSM7X30 && DEBUG_MSM_UART2
1140 default 0x94100000 if ARCH_FSM9XXX && DEBUG_MSM_UART2
1141 default 0xA9C00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART3
1142 default 0xACC00000 if ARCH_MSM7X30 && DEBUG_MSM_UART3
1143
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1144choice
1145 prompt "Debug UART"
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1146 depends on DEBUG_LL
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1147
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1148 config DEBUG_MSM_UART1
1149 bool "Kernel low-level debugging messages via MSM UART1"
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1150 depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50 || ARCH_FSM9XXX
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1151 help
1152 Say Y here if you want the debug print routines to direct
1153 their output to the first serial port on MSM devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1154
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1155 config DEBUG_MSM_UART2
1156 bool "Kernel low-level debugging messages via MSM UART2"
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1157 depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50 || ARCH_FSM9XXX
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1158 help
1159 Say Y here if you want the debug print routines to direct
1160 their output to the second serial port on MSM devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1161
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1162 config DEBUG_MSM_UART3
1163 bool "Kernel low-level debugging messages via MSM UART3"
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1164 depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1165 help
1166 Say Y here if you want the debug print routines to direct
1167 their output to the third serial port on MSM devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1168
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1169 config DEBUG_MSM8660_UART
1170 bool "Kernel low-level debugging messages via MSM 8660 UART"
1171 depends on ARCH_MSM8X60
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1172 select MSM_HAS_DEBUG_UART_HS
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1173 help
1174 Say Y here if you want the debug print routines to direct
1175 their output to the serial port on MSM 8660 devices.
Steve Mucklec8aabae2010-04-21 16:20:27 -0700[diff] [blame]1176
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1177 config DEBUG_MSM8960_UART
1178 bool "Kernel low-level debugging messages via MSM 8960 UART"
Stepan Moskovchenko824db172012-05-29 18:05:09 -0700[diff] [blame]1179 depends on ARCH_MSM8960 && DEBUG_LL
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1180 select MSM_HAS_DEBUG_UART_HS
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1181 help
1182 Say Y here if you want the debug print routines to direct
1183 their output to the serial port on MSM 8960 devices.
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1184
Stepan Moskovchenko824db172012-05-29 18:05:09 -0700[diff] [blame]1185 config DEBUG_MSM8930_UART
1186 bool "Kernel low-level debugging messages via MSM 8930 UART"
1187 depends on ARCH_MSM8930 && DEBUG_LL
1188 select MSM_HAS_DEBUG_UART_HS
1189 help
1190 Say Y here if you want the debug print routines to direct
1191 their output to the serial port on MSM 8930 devices.
1192
1193 config DEBUG_APQ8064_UART
1194 bool "Kernel low-level debugging messages via APQ 8064 UART"
1195 depends on ARCH_APQ8064 && DEBUG_LL
1196 select MSM_HAS_DEBUG_UART_HS
1197 help
1198 Say Y here if you want the debug print routines to direct
1199 their output to the serial port on APQ 8064 devices.
1200
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1201 config DEBUG_MSM8974_UART
1202 bool "Kernel low-level debugging messages via MSM 8974 UART"
1203 depends on ARCH_MSM8974
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1204 select MSM_HAS_DEBUG_UART_HS_V14
1205 help
1206 Say Y here if you want the debug print routines to direct
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1207 their output to the serial port on MSM 8974 devices.
Ravi Kumar Vb31dbba2012-08-31 22:40:22 +0530[diff] [blame]1208
1209 config DEBUG_MPQ8092_UART
1210 bool "Kernel low-level debugging messages via MPQ8092 UART"
1211 depends on ARCH_MPQ8092
1212 select MSM_HAS_DEBUG_UART_HS_V14
1213 help
1214 Say Y here if you want the debug print routines to direct
1215 their output to the serial port on MPQ8092 devices.
Stepan Moskovchenko80064f32013-03-05 16:58:39 -0800[diff] [blame]1216
1217 config DEBUG_MSMZINC_UART
1218 bool "Kernel low-level debugging messages via MSMZINC UART"
1219 depends on ARCH_MSMZINC
1220 select MSM_HAS_DEBUG_UART_HS_V14
1221 help
1222 Say Y here if you want the debug print routines to direct
1223 their output to the serial port on MSMZINC devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1224endchoice
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1225
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1226choice
1227 prompt "Default Timer"
1228 default MSM7X00A_USE_GP_TIMER
1229
1230 config MSM7X00A_USE_GP_TIMER
1231 bool "GP Timer"
1232 help
1233 Low resolution timer that allows power collapse from idle.
1234
1235 config MSM7X00A_USE_DG_TIMER
1236 bool "DG Timer"
1237 help
1238 High resolution timer.
1239endchoice
1240
1241choice
1242 prompt "Suspend sleep mode"
1243 default MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1244 help
1245 Allows overriding the sleep mode used. Leave at power
1246 collapse suspend unless the arm9 image has problems.
1247
1248 config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1249 bool "Power collapse suspend"
1250 help
1251 Lowest sleep state. Returns through reset vector.
1252
1253 config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
1254 bool "Power collapse"
1255 help
1256 Sleep state that returns through reset vector.
1257
1258 config MSM7X00A_SLEEP_MODE_APPS_SLEEP
1259 bool "Apps Sleep"
1260
1261 config MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1262 bool "Ramp down cpu clock and wait for interrupt"
1263
1264 config MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
1265 bool "Wait for interrupt"
1266endchoice
1267
1268config MSM7X00A_SLEEP_MODE
1269 int
1270 default 0 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1271 default 1 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
1272 default 2 if MSM7X00A_SLEEP_MODE_APPS_SLEEP
1273 default 3 if MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1274 default 4 if MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
1275
1276choice
1277 prompt "Idle sleep mode"
1278 default MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
1279 help
1280 Allows overriding the sleep mode used from idle. Leave at power
1281 collapse suspend unless the arm9 image has problems.
1282
1283 config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1284 bool "Power collapse suspend"
1285 help
1286 Lowest sleep state. Returns through reset vector.
1287
1288 config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
1289 bool "Power collapse"
1290 help
1291 Sleep state that returns through reset vector.
1292
1293 config MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
1294 bool "Apps Sleep"
1295
1296 config MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1297 bool "Ramp down cpu clock and wait for interrupt"
1298
1299 config MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
1300 bool "Wait for interrupt"
1301endchoice
1302
1303config MSM7X00A_IDLE_SLEEP_MODE
1304 int
1305 default 0 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1306 default 1 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
1307 default 2 if MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
1308 default 3 if MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1309 default 4 if MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
1310
1311config MSM7X00A_IDLE_SLEEP_MIN_TIME
1312 int "Minimum idle time before sleep"
1313 default 20000000
1314 help
1315 Minimum idle time in nanoseconds before entering low power mode.
1316
1317config MSM7X00A_IDLE_SPIN_TIME
1318 int "Idle spin time before cpu ramp down"
1319 default 80000
1320 help
1321 Spin time in nanoseconds before ramping down cpu clock and entering
1322 any low power state.
1323
1324menuconfig MSM_IDLE_STATS
1325 bool "Collect idle statistics"
1326 default y
1327 help
1328 Collect idle statistics and export them in proc/msm_pm_stats.
1329
1330if MSM_IDLE_STATS
1331
1332config MSM_IDLE_STATS_FIRST_BUCKET
1333 int "First bucket time"
1334 default 62500
1335 help
1336 Upper time limit in nanoseconds of first bucket.
1337
1338config MSM_IDLE_STATS_BUCKET_SHIFT
1339 int "Bucket shift"
1340 default 2
1341
1342config MSM_IDLE_STATS_BUCKET_COUNT
1343 int "Bucket count"
1344 default 10
1345
1346config MSM_SUSPEND_STATS_FIRST_BUCKET
1347 int "First bucket time for suspend"
1348 default 1000000000
1349 help
1350 Upper time limit in nanoseconds of first bucket of the
1351 histogram. This is for collecting statistics on suspend.
1352
1353endif # MSM_IDLE_STATS
1354
1355config CPU_HAS_L2_PMU
1356 bool "L2CC PMU Support"
1357 help
1358 Select this if the L2 cache controller has a Performance Monitoring Unit.
1359
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1360config HTC_HEADSET
1361 tristate "HTC 2 Wire detection driver"
1362 default n
1363 help
1364 Provides support for detecting HTC 2 wire devices, such as wired
1365 headset, on the trout platform. Can be used with the msm serial
1366 debugger, but not with serial console.
1367
1368config TROUT_BATTCHG
1369 depends on MACH_TROUT && POWER_SUPPLY
1370 default y
1371 bool "Trout battery / charger driver"
1372
1373config HTC_PWRSINK
1374 depends on MSM_SMD
1375 default n
1376 bool "HTC Power Sink Driver"
1377
1378config QSD_SVS
1379 bool "QSD Static Voltage Scaling"
1380 depends on (MACH_QSD8X50_SURF || MACH_QSD8X50_FFA)
1381 default y
1382 select TPS65023
1383 help
1384 Enables static voltage scaling using the TPS65023 PMIC.
1385
1386config QSD_PMIC_DEFAULT_DCDC1
1387 int "PMIC default output voltage"
1388 depends on (MACH_QSD8X50_SURF || MACH_QSD8X50_FFA)
1389 default 1250
1390 help
1391 This is the PMIC voltage at Linux kernel boot.
1392
1393config MSM_FIQ_SUPPORT
1394 default y
1395 bool "Enable installation of an FIQ handler."
1396
1397config MSM_SERIAL_DEBUGGER
1398 select MSM_FIQ_SUPPORT
1399 select KERNEL_DEBUGGER_CORE
1400 default n
1401 bool "FIQ Mode Serial Debugger"
1402 help
1403 The FIQ serial debugger can accept commands even when the
1404 kernel is unresponsive due to being stuck with interrupts
1405 disabled. Depends on the kernel debugger core in drivers/misc.
1406
1407config MSM_SERIAL_DEBUGGER_CONSOLE
1408 depends on MSM_SERIAL_DEBUGGER
1409 default n
1410 bool "Console on FIQ Serial Debugger port"
1411 help
1412 Enables a console so that printk messages are displayed on
1413 the debugger serial port as the occur.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1414
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]1415config MSM_PROC_COMM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1416 default y
1417 bool "Proc-Comm RPC Interface"
1418 help
1419 Enables a lightweight communications interface to the
1420 baseband processor.
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]1421
Gregory Bean1963a2a2010-08-28 10:05:44 -0700[diff] [blame]1422config MSM_SMD
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1423 bool "MSM Shared Memory Driver (SMD)"
1424 help
1425 Support for the shared memory interface between the apps
1426 processor and the baseband processor. Provides access to
1427 the "shared heap", as well as virtual serial channels
1428 used to communicate with various services on the baseband
1429 processor.
1430
1431choice
1432 prompt "MSM Shared memory interface version"
1433 depends on MSM_SMD
1434 default MSM_SMD_PKG3 if ARCH_MSM_ARM11
1435 default MSM_SMD_PKG4 if ARCH_MSM_SCORPION
1436
1437 config MSM_SMD_PKG3
1438 bool
1439 prompt "Package 3"
1440
1441 config MSM_SMD_PKG4
1442 bool
1443 prompt "Package 4"
1444endchoice
1445
Niranjana Vishwanathapuraf1427ac2012-05-03 14:28:21 -0600[diff] [blame]1446config MSM_PCIE
1447 bool "MSM PCIe Controller driver"
1448 depends on PCI && PCI_MSI
1449 help
1450 Enables the PCIe functionality by configures PCIe core on
1451 MSM chipset and by enabling the ARM PCI framework extension.
1452
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1453config MSM_RPC_SDIO_XPRT
1454 depends on MSM_SDIO_AL
1455 default y
1456 bool "MSM SDIO XPRT Layer"
1457 help
1458 SDIO Transport Layer for RPC Rouer
1459
1460config MSM_RPC_SDIO_DEBUG
1461 depends on MSM_RPC_SDIO_XPRT
1462 default y
1463 bool "MSM SDIO XPRT debug support"
1464 help
1465 Support for debugging SDIO XPRT
1466
1467config MSM_SMD_DEBUG
1468 depends on MSM_SMD
1469 default y
1470 bool "MSM SMD debug support"
1471 help
1472 Support for debugging the SMD for communication
1473 between the ARM9 and ARM11
1474
1475config MSM_SDIO_AL
1476 depends on ((ARCH_MSM7X30 || MACH_MSM8X60_FUSN_FFA || MACH_TYPE_MSM8X60_FUSION) && HAS_WAKELOCK)
1477 default y
1478 tristate "SDIO-Abstraction-Layer"
1479 help
1480 Support MSM<->MDM Communication over SDIO bus.
1481 MDM SDIO-Client should have pipes support.
1482
1483config MSM_SDIO_DMUX
1484 bool "SDIO Data Mux Driver"
1485 depends on MSM_SDIO_AL
1486 default n
1487 help
1488 Support Muxed Data Channels over SDIO interface.
1489
1490config MSM_BAM_DMUX
1491 bool "BAM Data Mux Driver"
1492 depends on SPS
1493 default n
1494 help
1495 Support Muxed Data Channels over BAM interface.
1496 BAM has a limited number of pipes. This driver
1497 provides a means to support more logical channels
1498 via muxing than BAM could without muxing.
1499
1500config MSM_N_WAY_SMD
Jeff Hugo0c0f5e92011-09-28 13:55:45 -0600[diff] [blame]1501 depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1502 default y
1503 bool "MSM N-WAY SMD support"
1504 help
1505 Supports APPS-QDSP SMD communication along with
1506 normal APPS-MODEM SMD communication.
1507
1508config MSM_N_WAY_SMSM
Jeff Hugo0c0f5e92011-09-28 13:55:45 -0600[diff] [blame]1509 depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1510 default y
1511 bool "MSM N-WAY SMSM support"
1512 help
1513 Supports APPS-QDSP SMSM communication along with
1514 normal APPS-MODEM SMSM communication.
1515
Eric Holmberg6275b602012-11-19 13:05:04 -0700[diff] [blame]1516config MSM_SMP2P
1517 bool "SMSM Point-to-Point (SMP2P)"
1518 depends on MSM_SMD
1519 help
1520 Provide point-to-point remote signaling support.
1521 SMP2P enables transferring 32-bit values between
1522 the local and a remote system using shared
1523 memory and interrupts. A client can open multiple
1524 32-bit values by specifying a unique string and
1525 remote processor ID.
1526
1527config MSM_SMP2P_TEST
1528 bool "SMSM Point-to-Point Test"
1529 depends on MSM_SMP2P
1530 help
1531 Enables loopback and unit testing support for
1532 SMP2P. Loopback support is used by other
1533 processors to do unit testing. Unit tests
1534 are used to verify the local and remote
1535 implementations.
1536
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1537config MSM_RESET_MODEM
1538 tristate "Reset Modem Driver"
1539 depends on MSM_SMD
1540 default m
1541 help
1542 Allows the user to reset the modem through a device node.
1543
1544config MSM_SMD_LOGGING
1545 depends on MSM_SMD
1546 default y
1547 bool "MSM Shared Memory Logger"
1548 help
1549 This option exposes the shared memory logger at /dev/smem_log
1550 and a debugfs node named smem_log.
1551
1552 If in doubt, say yes.
1553
Karthikeyan Ramasubramaniane1f4f732011-08-08 13:34:47 -0600[diff] [blame]1554config MSM_IPC_LOGGING
1555 bool "MSM Debug Logging for IPC Drivers"
1556 help
1557 This option allows the debug logging for IPC Drivers.
1558
1559 If in doubt, say no.
1560
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1561config MSM_SMD_NMEA
1562 bool "NMEA GPS Driver"
1563 depends on MSM_SMD
1564 default y
1565 help
1566 Enable this to support the NMEA GPS device.
1567
1568 If in doubt, say yes.
1569
1570config MSM_SDIO_TTY
1571 bool "SDIO TTY Driver"
1572 depends on MSM_SDIO_AL
1573 default n
1574 help
1575 Provides a TTY driver SDIO TTY
1576 This driver can be used by user space
1577 applications for passing data through the
1578 SDIO interface.
1579
1580config MSM_SMD_TTY
1581 bool "SMD TTY Driver"
1582 depends on MSM_SMD
1583 default y
1584 help
1585 Provides TTY interfaces to interact with the modem.
1586
1587 If in doubt, say yes.
1588
1589config MSM_SMD_QMI
1590 bool "SMD QMI Driver"
1591 depends on MSM_SMD
1592 default y
1593 help
1594 Manages network data connections.
1595
1596 If in doubt, say yes.
1597
1598config MSM_SMD_PKT
1599 bool "SMD Packet Driver"
1600 depends on MSM_SMD
1601 default y
1602 help
1603 Provides a binary SMD non-muxed packet port interface.
1604
1605 If in doubt, say yes.
1606
1607config MSM_SDIO_CMUX
1608 bool "SDIO CMUX Driver"
1609 depends on MSM_SDIO_AL
1610 default n
1611 help
1612 Provides a Muxed port interface over SDIO QMI
1613
1614config MSM_DSPS
1615 bool "Sensors DSPS driver"
1616 depends on (MSM_PIL && (ARCH_MSM8X60 || ARCH_MSM8960))
1617 default n
1618 help
1619 Provides user-space interface to the sensors manager
1620 to turn on/off the Sensors Processor system clocks.
1621 It is the DSPS responsibility to turn on/off the sensors
1622 themself.
1623 The number of clocks and their name may vary between targets.
1624 It also triggers the PIL to load the DSPS firmware.
1625
1626config MSM_SDIO_CTL
1627 bool "SDIO CTL Driver"
1628 depends on MSM_SDIO_CMUX
1629 default n
1630 help
1631 Provides a binary SDIO control port interface.
1632
1633config MSM_ONCRPCROUTER
1634 depends on MSM_SMD
1635 default n
1636 bool "MSM ONCRPC router support"
1637 help
1638 Support for the MSM ONCRPC router for communication between
1639 the ARM9 and ARM11
1640
1641config MSM_IPC_ROUTER
Karthikeyan Ramasubramanianda45b432011-09-23 14:39:30 -0600[diff] [blame]1642 depends on NET
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1643 default n
1644 bool "MSM IPC Router support"
1645 help
1646 Support for the MSM IPC Router for communication between
1647 the APPs and the MODEM
1648
Karthikeyan Ramasubramanianda45b432011-09-23 14:39:30 -0600[diff] [blame]1649config MSM_IPC_ROUTER_SMD_XPRT
1650 depends on MSM_SMD
1651 depends on MSM_IPC_ROUTER
1652 default n
1653 bool "MSM SMD XPRT Layer"
1654 help
1655 SMD Transport Layer for IPC Router
1656
Karthikeyan Ramasubramanian5b502d3642012-09-23 22:23:36 -0600[diff] [blame]1657config MSM_IPC_ROUTER_SECURITY
1658 depends on MSM_IPC_ROUTER
1659 bool "MSM IPC Router Security support"
1660 help
1661 This feature of IPC Router will enforce security rules
1662 configured by a security script from the user-space. IPC Router
1663 once configured with the security rules will ensure that the
1664 sender of the message to a service belongs to the relevant
1665 Linux group as configured by the security script.
1666
Karthikeyan Ramasubramanianfec77ff2012-10-26 20:03:26 -0600[diff] [blame]1667config MSM_QMI_INTERFACE
1668 depends on MSM_IPC_ROUTER
1669 depends on QMI_ENCDEC
1670 default n
1671 bool "MSM QMI Interface Library"
1672 help
1673 Library to send and receive QMI messages over IPC Router.
1674 This library provides interface functions to the kernel drivers
1675 to perform QMI message marshaling and transport them over IPC
1676 Router.
1677
Karthikeyan Ramasubramaniana9859e82012-07-12 13:10:42 -0600[diff] [blame]1678config MSM_TEST_QMI_CLIENT
1679 depends on MSM_QMI_INTERFACE
1680 bool "MSM TEST QMI CLIENT"
1681 help
1682 The sample QMI client provides a test code for QMI usage. The
1683 test_service client driver uses QMI interface library to send
1684 and receive QMI messages over IPC Router. The test code sends
1685 a synchronous QMI request to the test_service and handles the
1686 QMI responses.
1687
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1688config MSM_ONCRPCROUTER_DEBUG
1689 depends on MSM_ONCRPCROUTER
1690 default y
1691 bool "MSM debug ONCRPC router support"
1692 help
1693 Support for debugging the ONCRPC router for communication
1694 between the ARM9 and ARM11
1695
1696config MSM_RPC_LOOPBACK_XPRT
1697 depends on MSM_ONCRPCROUTER
1698 default n
1699 bool "MSM RPC local routing support"
1700 help
1701 Support for routing RPC messages between APPS clients
1702 and APPS servers. Helps in testing APPS RPC framework.
1703
1704config MSM_RPCSERVER_TIME_REMOTE
1705 depends on MSM_ONCRPCROUTER && RTC_HCTOSYS
1706 default y
1707 bool "Time remote RPC server"
1708 help
1709 The time remote server receives notification of time bases and
1710 reports these events to registered callback functions.
1711
1712config MSM_RPCSERVER_WATCHDOG
1713 depends on MSM_ONCRPCROUTER
1714 default y
1715 bool "Watchdog RPC server"
1716 help
1717 The dog_keepalive server handles watchdog events.
1718
1719config MSM_RPC_WATCHDOG
1720 depends on MSM_ONCRPCROUTER
1721 default n
1722 bool "Watchdog RPC client"
1723 help
1724 The dog_keepalive client module.
1725
1726config MSM_RPC_PING
1727 depends on MSM_ONCRPCROUTER && DEBUG_FS
1728 default m
1729 bool "MSM rpc ping"
1730 help
1731 Implements MSM rpc ping test module.
1732
1733config MSM_RPC_PROC_COMM_TEST
1734 depends on DEBUG_FS && MSM_PROC_COMM
1735 default m
1736 bool "MSM rpc proc comm test"
1737 help
1738 Implements MSM rpc proc comm test module.
1739
1740config MSM_RPC_OEM_RAPI
1741 depends on MSM_ONCRPCROUTER
1742 default m
1743 bool "MSM oem rapi"
1744 help
1745 Implements MSM oem rapi client module.
1746
1747config MSM_RPCSERVER_HANDSET
1748 depends on MSM_ONCRPCROUTER
1749 default y
1750 bool "Handset events RPC server"
1751 help
1752 Support for receiving handset events like headset detect,
1753 headset switch and clamshell state.
1754
1755config MSM_RMT_STORAGE_CLIENT
1756 depends on (ARCH_MSM && MSM_ONCRPCROUTER)
1757 default n
1758 bool "Remote Storage RPC client"
1759 help
1760 Provide RPC mechanism for remote processors to access storage
1761 device on apps processor.
1762
1763config MSM_RMT_STORAGE_CLIENT_STATS
1764 depends on (MSM_RMT_STORAGE_CLIENT && DEBUG_FS)
1765 default n
1766 bool "Remote storage RPC client performance statistics"
1767 help
1768 Collects performance statistics and shows this information
1769 through a debugfs file rmt_storage_stats.
1770
1771config MSM_SDIO_SMEM
1772 depends on MSM_SDIO_AL
1773 default n
1774 bool "SDIO SMEM for remote storage"
1775 help
1776 Copies data from remote MDM9K memory to local MSM8x60
1777 memory. Used by remote storage client to shadow
1778 MDM9K filesystem.
1779
1780config MSM_DALRPC
1781 bool "DAL RPC support"
Bryan Huntsman18b3c0c2011-11-23 15:12:58 -0800[diff] [blame]1782 default n
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1783 help
1784 Supports RPC calls to DAL devices on remote processor cores.
1785
1786config MSM_DALRPC_TEST
1787 tristate "DAL RPC test module"
1788 depends on (MSM_DALRPC && DEBUG_FS)
1789 default m
1790 help
1791 Exercises DAL RPC calls to QDSP6.
1792
1793if CPU_FREQ_MSM
1794
1795config MSM_CPU_FREQ_SET_MIN_MAX
1796 bool "Set Min/Max CPU frequencies."
1797 default n
1798 help
1799 Allow setting min and max CPU frequencies. Sysfs can be used
1800 to override these values.
1801
1802config MSM_CPU_FREQ_MAX
1803 int "Max CPU Frequency"
1804 depends on MSM_CPU_FREQ_SET_MIN_MAX
1805 default 384000
1806
1807config MSM_CPU_FREQ_MIN
1808 int "Min CPU Frequency"
1809 depends on MSM_CPU_FREQ_SET_MIN_MAX
1810 default 245760
1811
1812endif # CPU_FREQ_MSM
1813
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1814config MSM_AVS_HW
1815 bool "Enable Adaptive Voltage Scaling (AVS)"
1816 default n
1817 help
1818 Enable AVS hardware to fine tune voltage at each frequency. The
1819 AVS hardware blocks associated with each Qualcomm ARMv7 cores can
1820 fine tune the voltages based on the feedback from the ring
1821 oscillators.
1822
1823config MSM_HW3D
1824 tristate "MSM Hardware 3D Register Driver"
1825 depends on ANDROID_PMEM
1826 default y
1827 help
1828 Provides access to registers needed by the userspace OpenGL|ES
1829 library.
1830
1831config MSM_ADSP
1832 depends on (ARCH_MSM7X01A || ARCH_MSM7X25 || ARCH_MSM7X27)
1833 tristate "MSM ADSP driver"
1834 depends on ANDROID_PMEM
1835 default y
1836 help
1837 Provides access to registers needed by the userspace aDSP library.
1838
1839config ADSP_RPC_VER
1840 hex
1841 default 0x30002 if (ARCH_MSM7X27 || (ARCH_MSM7X25 && AMSS_7X25_VERSION_2009))
1842 default 0x30001 if (ARCH_MSM7X01A || (ARCH_MSM7X25 && AMSS_7X25_VERSION_2008))
1843 depends on MSM_ADSP
1844 help
1845 Select proper ADSP RPC version
1846choice
1847 prompt "ADSP RPC version"
1848
1849 default AMSS_7X25_VERSION_2009
1850
1851 config AMSS_7X25_VERSION_2009
1852 bool "2.0.09"
1853
1854 config AMSS_7X25_VERSION_2008
1855 bool "2.0.08"
1856endchoice
1857
1858config MSM7KV2_AUDIO
1859 bool "MSM7K v2 audio"
1860 depends on (ARCH_MSM7X30 && ANDROID_PMEM)
1861 default y
1862 help
1863 Enables QDSP5V2-based audio drivers for audio playbacks and
1864 voice call.
1865
1866config MSM_ADSP_REPORT_EVENTS
1867 bool "Report modem events from the DSP"
1868 default y
1869 depends on (MSM_ADSP || MSM7KV2_AUDIO)
1870 help
1871 Normally, only messages from the aDSP are reported to userspace.
1872 With this option, we report events from the aDSP as well.
1873
1874config MSM_QDSP6
1875 tristate "QDSP6 support"
1876 depends on ARCH_QSD8X50 && ANDROID_PMEM
1877 default y
1878 help
1879 Enable support for qdsp6. This provides audio and video functionality.
1880
1881config MSM8X60_AUDIO
1882 tristate "MSM8X60 audio support"
1883 depends on ARCH_MSM8X60 && ANDROID_PMEM
1884 default y
1885 help
1886 Enable support for qdsp6v2. This provides audio functionality.
1887
1888config MSM8X60_FTM_AUDIO_DEVICES
1889 bool "MSM8X60 audio factory test mode support"
1890 depends on MSM8X60_AUDIO
1891 help
1892 Enable support audio factory test mode devices. This is used
1893 in a production line environment.
1894
Ben Romberger45b351c2011-07-20 22:37:27 -0700[diff] [blame]1895config RTAC
1896 bool "MSM8K real-time audio calibration support"
1897 default y
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1898 help
Ben Romberger45b351c2011-07-20 22:37:27 -0700[diff] [blame]1899 Enable support for rtac. This enables calibration during
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1900 audio operation
1901
1902config MSM7X27A_AUDIO
1903 bool "MSM7X27A audio support"
1904 depends on ARCH_MSM7X27A && MSM_ADSP
1905 default n
1906 help
1907 Enable support for 7x27a. This provides audio functionality.
1908
Justin Pauporea6cd2092011-06-22 16:19:45 -0700[diff] [blame]1909config MSM_PROC_COMM_REGULATOR
Gregory Bean1963a2a2010-08-28 10:05:44 -0700[diff] [blame]1910 bool
Justin Pauporea6cd2092011-06-22 16:19:45 -0700[diff] [blame]1911 depends on MSM_PROC_COMM && REGULATOR
1912 help
1913 Enable regulator framework support for regulators managed by PMLIB
1914 on the modem, and controlled through proccomm calls.
1915
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1916config MSM_VREG_SWITCH_INVERTED
1917 bool "Reverse vreg switch polarity"
1918 default n
1919 help
1920 Reverses the enable and disable for vreg switch.
1921
1922config MSM_DMA_TEST
1923 tristate "MSM DMA test module"
1924 default m
1925 help
1926 Intended to be compiled as a module. Provides a device node
1927 and ioctls for testing the MSM dma system.
1928
1929config WIFI_CONTROL_FUNC
1930 bool "Enable WiFi control function abstraction"
1931 help
1932 Enables Power/Reset/Carddetect function abstraction
1933
1934config WIFI_MEM_PREALLOC
1935 depends on WIFI_CONTROL_FUNC
1936 bool "Preallocate memory for WiFi buffers"
1937 help
1938 Preallocates memory buffers for WiFi driver
1939
1940config QSD_AUDIO
1941 bool "QSD audio"
1942 depends on ARCH_MSM_SCORPION && MSM_DALRPC && ANDROID_PMEM && !MSM_SMP
1943 default y
1944 help
1945 Provides PCM, MP3, and AAC audio playback.
1946
1947config AUDIO_AAC_PLUS
1948 depends on (MSM_ADSP || QSD_AUDIO || MSM7KV2_AUDIO)
1949 bool "AAC+ Audio"
1950 default y
1951 help
1952 Provides AAC+ decoding
1953
1954config AUDIO_ENHANCED_AAC_PLUS
1955 depends on AUDIO_AAC_PLUS
1956 bool "Enhanced AAC+ Audio"
1957 default y
1958 help
1959 Provides Enhanced AAC+ decoding
1960
1961config SURF_FFA_GPIO_KEYPAD
1962 bool "MSM SURF/FFA GPIO keypad"
1963 depends on INPUT_GPIO = "y"
1964 default y
1965 help
1966 Select if the GPIO keypad is attached.
1967
1968config MSM_SLEEP_TIME_OVERRIDE
1969 bool "Allow overriding suspend/sleep time with PM module parameter"
1970 default y
1971 help
1972 Enable the module parameter sleep_time_override. Specified
1973 in units of seconds, it overwrites the normal sleep time of
1974 suspend. The feature is required for automated power management
1975 testing.
1976
1977config MSM_MEMORY_LOW_POWER_MODE
1978 bool "Control the low power modes of memory"
1979 default n
1980 help
1981 The application processor controls whether memory should enter
1982 which low power mode.
1983
1984choice
1985 prompt "Default Memory Low Power Mode during Idle"
1986 depends on MSM_MEMORY_LOW_POWER_MODE
1987 default MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
1988 help
1989 Selects the default low power mode of the memory during idle
1990 sleep.
1991
1992 config MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
1993 bool "Memory active"
1994
1995 config MSM_MEMORY_LOW_POWER_MODE_IDLE_RETENTION
1996 bool "Memory in retention"
1997
1998 config MSM_MEMORY_LOW_POWER_MODE_IDLE_DEEP_POWER_DOWN
1999 bool "Memory in deep power down"
2000endchoice
2001
2002choice
2003 prompt "Default Memory Low Power Mode during Suspend"
2004 depends on MSM_MEMORY_LOW_POWER_MODE
2005 default MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
2006 help
2007 Selects the default low power mode of the memory during suspend
2008 sleep.
2009
2010 config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
2011 bool "Memory active"
2012
2013 config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_RETENTION
2014 bool "Memory in retention"
2015
2016 config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_DEEP_POWER_DOWN
2017 bool "Memory in deep power down"
2018endchoice
2019
2020choice
2021 prompt "Power management timeout action"
2022 default MSM_PM_TIMEOUT_HALT
2023 help
2024 Selects the Application Processor's action when Power Management
2025 times out waiting for Modem's handshake.
2026
2027 config MSM_PM_TIMEOUT_HALT
2028 bool "Halt the Application Processor"
2029
2030 config MSM_PM_TIMEOUT_RESET_MODEM
2031 bool "Reset the Modem Processor"
2032
2033 config MSM_PM_TIMEOUT_RESET_CHIP
2034 bool "Reset the entire chip"
2035endchoice
2036
2037config MSM_IDLE_WAIT_ON_MODEM
2038 int "Wait for Modem to become ready for idle power collapse"
2039 default 0
2040 help
2041 If Modem is not ready to handle Application Processor's request
2042 for idle power collapse, wait the number of microseconds in case
2043 Modem becomes ready soon.
2044
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]2045config MSM_RPM_REGULATOR
2046 bool "RPM regulator driver"
Matt Wagantall32dc71e2012-01-04 11:13:11 -0800[diff] [blame]2047 depends on MSM_RPM && REGULATOR
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]2048 help
2049 Compile in support for the RPM regulator driver, used for setting
2050 voltages and other parameters of the various power rails supplied
2051 by some Qualcomm PMICs.
2052
David Collinsc7642322012-04-04 10:19:12 -0700[diff] [blame]2053config MSM_RPM_REGULATOR_SMD
2054 bool "SMD RPM regulator driver"
2055 depends on REGULATOR
2056 depends on OF
2057 depends on MSM_RPM_SMD
2058 help
2059 Compile in support for the SMD RPM regulator driver which is used for
2060 setting voltages and other parameters of the various power rails
2061 supplied by some Qualcomm PMICs. The SMD RPM regulator driver should
2062 be used on systems which contain an RPM which communicates with the
2063 application processor over SMD.
2064
Rohit Vaswani5fd759e2012-11-07 07:05:08 -0800[diff] [blame]2065config MSM_SMCMOD
2066 tristate "Secure Monitor Call (SMC) Module"
2067 default n
2068 depends on (ARCH_FSM9XXX && ION && ION_MSM && MSM_SCM)
2069 help
2070 Enable support for smcmod driver. This driver provides a mechanism
2071 to execute the Secure Monitor Call (SMC) to switch from non-secure
2072 to secure execution in the fsm9xxx targets. This module utilizes Ion
2073 for buffer management.
2074
Stephen Boyd01710582012-07-09 13:40:05 -0700[diff] [blame]2075config MSM_SUBSYSTEM_RESTART
2076 bool "MSM Subsystem Restart"
2077 help
2078 This option enables the MSM subsystem restart framework.
2079
2080 The MSM subsystem restart framework provides support to boot,
2081 shutdown, and restart subsystems with a reference counted API.
2082 It also notifies userspace of transitions between these states via
2083 sysfs.
2084
2085config MSM_SYSMON_COMM
2086 bool "MSM System Monitor communication support"
2087 depends on MSM_SMD && MSM_SUBSYSTEM_RESTART
2088 help
2089 This option adds support for MSM System Monitor library, which
2090 provides an API that may be used for notifying subsystems within
2091 the SoC about other subsystems' power-up/down state-changes.
2092
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2093config MSM_PIL
2094 bool "Peripheral image loading"
2095 select FW_LOADER
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2096 default n
2097 help
2098 Some peripherals need to be loaded into memory before they can be
2099 brought out of reset.
2100
2101 Say yes to support these devices.
2102
Stephen Boyd4eb885b2011-09-29 01:16:03 -0700[diff] [blame]2103config MSM_PIL_MODEM
2104 tristate "Modem (ARM11) Boot Support"
Stephen Boyd3ac20732012-05-03 18:46:08 -0700[diff] [blame]2105 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd4eb885b2011-09-29 01:16:03 -0700[diff] [blame]2106 help
2107 Support for booting and shutting down ARM11 Modem processors.
2108
Stephen Boyd3acc9e42011-09-28 16:46:40 -0700[diff] [blame]2109config MSM_PIL_QDSP6V3
2110 tristate "QDSP6v3 (Hexagon) Boot Support"
Stephen Boyd2e19d932012-05-09 17:36:04 -0700[diff] [blame]2111 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd3acc9e42011-09-28 16:46:40 -0700[diff] [blame]2112 help
2113 Support for booting and shutting down QDSP6v3 processors (hexagon).
2114 The QDSP6 is a low power DSP used in audio software applications.
2115
Stephen Boydbdb53f32012-06-05 18:39:47 -0700[diff] [blame]2116config MSM_PIL_LPASS_QDSP6V4
2117 tristate "LPASS QDSP6v4 (Hexagon) Boot Support"
Stephen Boyda1cf76b2012-06-13 12:05:35 -0700[diff] [blame]2118 depends on MSM_SUBSYSTEM_RESTART
Stephen Boydeb819882011-08-29 14:46:30 -0700[diff] [blame]2119 help
Stephen Boydbdb53f32012-06-05 18:39:47 -0700[diff] [blame]2120 Support for booting and shutting down QDSP6v4 processors (hexagon)
2121 in low power audio subsystems. If you would like to record or
2122 play audio then say Y here.
2123
2124 If unsure, say N.
2125
2126config MSM_PIL_MODEM_QDSP6V4
2127 tristate "Modem QDSP6v4 (Hexagon) Boot Support"
Stephen Boyd2efa9962012-06-12 14:20:12 -0700[diff] [blame]2128 depends on MSM_SUBSYSTEM_RESTART
Stephen Boydbdb53f32012-06-05 18:39:47 -0700[diff] [blame]2129 help
2130 Support for booting and shutting down QDSP6v4 processors (hexagon)
2131 in modem subsystems. If you would like to make or receive phone
2132 calls then say Y here.
2133
2134 If unsure, say N.
Stephen Boydeb819882011-08-29 14:46:30 -0700[diff] [blame]2135
Matt Wagantallc2bbdc32012-03-21 19:44:50 -0700[diff] [blame]2136config MSM_PIL_LPASS_QDSP6V5
Stephen Boyd633eb622012-06-13 12:05:35 -0700[diff] [blame]2137 tristate "LPASS QDSP6v5 (Hexagon) Boot Support"
2138 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
2139 help
2140 Support for booting and shutting down QDSP6v5 (Hexagon) processors
2141 in low power audio subsystems. This driver also monitors the ADSP
2142 SMSM status bits and the ADSP's watchdog interrupt and restarts the
2143 ADSP if the processor encounters a fatal error.
Matt Wagantall4e2599e2012-03-21 22:31:35 -0700[diff] [blame]2144
2145config MSM_PIL_MSS_QDSP6V5
Stephen Boyd3da4fd02012-07-06 10:00:12 -0700[diff] [blame]2146 tristate "MSS QDSP6v5 (Hexagon) Boot Support"
2147 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Matt Wagantalle6e00d52012-03-08 17:39:07 -0800[diff] [blame]2148 help
Stephen Boyd3da4fd02012-07-06 10:00:12 -0700[diff] [blame]2149 Support for booting and shutting down QDSP6v5 (Hexagon) processors
2150 in modem subsystems. If you would like to make or receive phone
2151 calls then say Y here.
2152
2153 If unsure, say N.
Matt Wagantallc2bbdc32012-03-21 19:44:50 -0700[diff] [blame]2154
Stephen Boyd322a9922011-09-20 01:05:54 -0700[diff] [blame]2155config MSM_PIL_RIVA
2156 tristate "RIVA (WCNSS) Boot Support"
Stephen Boydfdec00d2012-05-10 17:04:49 -0700[diff] [blame]2157 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd322a9922011-09-20 01:05:54 -0700[diff] [blame]2158 help
2159 Support for booting and shutting down the RIVA processor (WCNSS).
2160 Riva is the wireless subsystem processor used in bluetooth, wireless
2161 LAN, and FM software applications.
2162
Stephen Boydd89eebe2011-09-28 23:28:11 -0700[diff] [blame]2163config MSM_PIL_TZAPPS
2164 tristate "TZApps Boot Support"
Stephen Boyd046013f2012-06-28 20:24:17 -0700[diff] [blame]2165 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boydd89eebe2011-09-28 23:28:11 -0700[diff] [blame]2166 help
2167 Support for booting and shutting down TZApps.
2168
2169 TZApps is an image that runs in the secure processor state. It is
2170 used to decrypt data and perform secure operations on the behalf of
2171 the kernel.
2172
Stephen Boyd25c4a0b2011-09-20 00:12:36 -0700[diff] [blame]2173config MSM_PIL_DSPS
2174 tristate "DSPS Boot Support"
Stephen Boydf169b4b2012-05-10 17:55:55 -0700[diff] [blame]2175 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd25c4a0b2011-09-20 00:12:36 -0700[diff] [blame]2176 help
2177 Support for booting and shutting down ARM7 DSPS processors.
2178
2179 DSPS is a sensors offloading processor used for applications such
2180 as rotation detection, temperature, etc.
2181
Stephen Boyd7b973de2012-03-09 12:26:16 -0800[diff] [blame]2182config MSM_PIL_VIDC
2183 tristate "Video Core Secure Boot Support"
Stephen Boyd046013f2012-06-28 20:24:17 -0700[diff] [blame]2184 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd7b973de2012-03-09 12:26:16 -0800[diff] [blame]2185 help
2186 Support for authenticating the video core image.
2187
Tianyi Gou828798d2012-05-02 21:12:38 -0700[diff] [blame]2188config MSM_PIL_VENUS
2189 tristate "VENUS (Video) Boot Support"
Stephen Boyd046013f2012-06-28 20:24:17 -0700[diff] [blame]2190 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Tianyi Gou828798d2012-05-02 21:12:38 -0700[diff] [blame]2191 help
2192 Support for booting and shutting down the VENUS processor (Video).
2193 Venus is the Video subsystem processor used for video codecs.
2194
Matt Wagantall292aace2012-01-26 19:12:34 -0800[diff] [blame]2195config MSM_PIL_GSS
Stephen Boydd86214b2012-05-10 15:26:35 -0700[diff] [blame]2196 tristate "GSS (Cortex A5) Boot Support"
2197 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Matt Wagantall292aace2012-01-26 19:12:34 -0800[diff] [blame]2198 help
2199 Support for booting and shutting down Cortex A5 processors which run
2200 GPS subsystem firmware.
2201
Tianyi Gouc1e049f82011-11-23 14:20:16 -0800[diff] [blame]2202config MSM_PIL_PRONTO
2203 tristate "PRONTO (WCNSS) Boot Support"
Stephen Boyd581fe852012-06-13 12:05:35 -0700[diff] [blame]2204 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Tianyi Gouc1e049f82011-11-23 14:20:16 -0800[diff] [blame]2205 help
2206 Support for booting and shutting down the PRONTO processor (WCNSS).
2207 PRONTO is the wireless subsystem processor used in bluetooth, wireless
2208 LAN, and FM software applications.
2209
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2210config MSM_SCM
2211 bool "Secure Channel Manager (SCM) support"
2212 default n
2213
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2214config SCORPION_Uni_45nm_BUG
2215 bool "Scorpion Uni 45nm(SC45U): Workaround for ICIMVAU and BPIMVA"
2216 depends on ARCH_MSM7X30 || (ARCH_QSD8X50 && MSM_SOC_REV_A)
2217 default y
2218 help
2219 Invalidating the Instruction Cache by Modified Virtual Address to PoU and
2220 invalidating the Branch Predictor Array by Modified Virtual Address can
2221 create invalid entries in the TLB with the wrong ASID values on Scorpion
2222 Uniprocessor 45nm (SC45U) cores. This option enables the recommended software
2223 workaround for Scorpion Uniprocessor 45nm cores.
2224
2225 This bug is not applicable to any ScorpionMP or Scorpion Uni 65nm(SC65U) cores.
2226
Harini Jayaramanef7805f2011-09-28 12:45:31 -0600[diff] [blame]2227config MSM_BUSPM_DEV
2228 tristate "MSM Bus Performance Monitor Kernel Module"
Gagan Mac0d5d49e2012-08-28 19:41:37 -0600[diff] [blame]2229 depends on (ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974)
Harini Jayaramanef7805f2011-09-28 12:45:31 -0600[diff] [blame]2230 default m
2231 help
2232 This kernel module is used to mmap() hardware registers for the
2233 performance monitors, counters, etc. The module can also be used to
2234 allocate physical memory which is used by bus performance hardware to
2235 dump performance data.
2236
Mona Hossain11c03ac2011-10-26 12:42:10 -0700[diff] [blame]2237config MSM_TZ_LOG
2238 tristate "MSM Trust Zone (TZ) Log Driver"
2239 depends on DEBUG_FS
2240 help
2241 This option enables a driver with a debugfs interface for messages
2242 produced by the Secure code (Trust zone). These messages provide
2243 diagnostic information about TZ operation.
2244
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2245config MSM_RPM_LOG
2246 tristate "MSM Resource Power Manager Log Driver"
2247 depends on DEBUG_FS
Priyanka Mathur49c60802012-12-13 12:53:58 -0800[diff] [blame]2248 depends on MSM_RPM || MSM_RPM_SMD
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2249 default n
2250 help
2251 This option enables a driver which can read from a circular buffer
2252 of messages produced by the RPM. These messages provide diagnostic
2253 information about RPM operation. The driver outputs the messages
2254 via a debugfs node.
2255
2256config MSM_RPM_STATS_LOG
2257 tristate "MSM Resource Power Manager Stat Driver"
2258 depends on DEBUG_FS
Priyanka Mathur1af9d4b2012-10-30 14:55:44 -0700[diff] [blame]2259 depends on MSM_RPM || MSM_RPM_SMD
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2260 default n
2261 help
2262 This option enables a driver which reads RPM messages from a shared
2263 memory location. These messages provide statistical information about
2264 the low power modes that RPM enters. The drivers outputs the message
2265 via a debugfs node.
2266
Girish Mahadevan898c56d2012-06-05 16:09:19 -0600[diff] [blame]2267config MSM_RPM_RBCPR_STATS_LOG
2268 tristate "MSM Resource Power Manager RPBCPR Stat Driver"
2269 depends on DEBUG_FS
2270 depends on MSM_RPM
2271 help
2272 This option enables a driver which reads RPM messages from a shared
2273 memory location. These messages provide statistical information about
2274 RBCPR (Rapid Bridge Core Power Reduction) information . The drivers
2275 outputs the message via a debugfs node.
2276
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2277config MSM_DIRECT_SCLK_ACCESS
2278 bool "Direct access to the SCLK timer"
2279 default n
2280
2281config IOMMU_API
2282 bool
Gregory Bean1963a2a2010-08-28 10:05:44 -0700[diff] [blame]2283
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2284config MSM_GPIOMUX
2285 bool
2286
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2287config MSM_SECURE_IO
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2288 bool
Stepan Moskovchenko0ab847452010-11-12 19:29:57 -0800[diff] [blame]2289
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2290config MSM_NATIVE_RESTART
Stephen Boyd2a1eb582010-08-27 10:01:23 -0700[diff] [blame]2291 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2292
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]2293config MSM_MODEM_RESTART
2294 bool
2295
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]2296config MSM_PM2
2297 depends on PM
2298 bool
2299
2300config MSM_PM8X60
2301 depends on PM
2302 bool
2303
Girish Mahadevan388c3082012-09-10 15:30:36 -0600[diff] [blame]2304config MSM_EVENT_TIMER
2305 bool "Event timer"
2306 help
2307 This option enables a modules that manages a list of event timers that
2308 need to be monitored by the PM. The enables the PM code to monitor
2309 events that require the core to be awake and ready to handle the
2310 event.
2311
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]2312config MSM_NOPM
2313 default y if !PM
2314 bool
2315
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2316config MSM_BUS_SCALING
2317 bool "Bus scaling driver"
2318 default n
2319
Gagan Mac85c70492011-06-10 16:07:47 -0600[diff] [blame]2320config MSM_BUS_RPM_MULTI_TIER_ENABLED
2321 bool "RPM Multi-tiering Configuration"
2322 depends on MSM_BUS_SCALING
2323
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2324config MSM_WATCHDOG
2325 bool "MSM Watchdog Support"
Rohit Vaswanie897f842012-03-19 14:19:34 -0700[diff] [blame]2326 depends on ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM9615 || ARCH_FSM9XXX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2327 help
2328 This enables the watchdog as is present on 8x60. Currently we use
2329 core 0's watchdog, and reset the entire SoC if it times out. It does
2330 not run during the bootup process, so it will not catch any early
2331 lockups.
2332
Hanumant Singhd1f01022012-07-05 14:21:53 -0700[diff] [blame]2333config MSM_WATCHDOG_V2
2334 bool "MSM Watchdog Support"
2335 help
2336 This enables the watchdog module. It causes kernel panic if the
2337 watchdog times out. It allows for detection of cpu hangs and
2338 deadlocks. It does not run during the bootup process, so it will
2339 not catch any early lockups.
2340
Hanumant Singh5e2541c2012-07-31 14:41:14 -0700[diff] [blame]2341config MSM_MEMORY_DUMP
2342 bool "MSM Memory Dump Support"
2343 help
2344 This enables memory dump feature. It allows various client
2345 subsystems to register respective dump regions. At the time
2346 of deadlocks or cpu hangs these dump regions are captured to
2347 give a snapshot of the system at the time of the crash.
2348
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2349config MSM_DLOAD_MODE
2350 bool "Enable download mode on crashes"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2351 default n
2352 help
2353 This makes the SoC enter download mode when it resets
2354 due to a kernel panic. Note that this doesn't by itself
2355 make the kernel reboot on a kernel panic - that must be
2356 enabled via another mechanism.
2357
Pratik Patel17f3b822011-11-21 12:41:47 -0800[diff] [blame]2358config MSM_JTAG
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2359 bool "Debug and ETM trace support across power collapse"
Pratik Patelfd6f56a2011-10-10 17:47:55 -0700[diff] [blame]2360 help
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2361 Enables support for debugging (specifically breakpoints) and ETM
Pratik Patel2963de42012-05-17 12:43:40 -0700[diff] [blame]2362 processor tracing across power collapse both for JTag and OS hosted
2363 software running on the target. Enabling this will ensure debug
2364 and ETM registers are saved and restored across power collapse.
2365
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2366 If unsure, say 'N' here to avoid potential power, performance and
2367 memory penalty.
Pratik Patel7831c082011-06-08 21:44:37 -0700[diff] [blame]2368
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2369config MSM_JTAG_MM
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2370 bool "Debug and ETM trace support across power collapse using memory mapped access"
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2371 help
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2372 Enables support for debugging (specifically breakpoints) and ETM
2373 processor tracing across power collapse both for JTag and OS hosted
2374 software running on the target. Enabling this will ensure debug
2375 and ETM registers are saved and restored across power collapse.
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2376
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2377 Required on targets on which cp14 access to debug and ETM registers is
2378 not permitted and so memory mapped access is necessary.
2379
2380 If unsure, say 'N' here to avoid potential power, performance and
2381 memory penalty.
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2382
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2383config MSM_ETM
2384 tristate "Enable MSM ETM and ETB"
Pratik Patel17f3b822011-11-21 12:41:47 -0800[diff] [blame]2385 depends on ARCH_MSM8X60
2386 select MSM_JTAG
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2387 help
Pratik Patel17f3b822011-11-21 12:41:47 -0800[diff] [blame]2388 Enables embedded trace collection on MSM8660
Pratik Patel7831c082011-06-08 21:44:37 -0700[diff] [blame]2389
Lynus Vazdde09ee2012-01-05 13:28:22 +0530[diff] [blame]2390config MSM_SLEEP_STATS_DEVICE
2391 bool "Enable exporting of MSM sleep device stats to userspace"
2392
Krishna Vanka7f563ff2012-03-20 22:04:19 +0530[diff] [blame]2393config MSM_RUN_QUEUE_STATS
2394 bool "Enable collection and exporting of MSM Run Queue stats to userspace"
Subbaraman Narayanamurthy0b148fc2012-11-28 12:14:12 -0800[diff] [blame]2395 default n
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]2396 help
2397 This option enalbes statistics collection on Run Queue. A daemon
2398 in user mode, called MPDecision will be using this data to decide
2399 on when to switch off/on the other cores.
Krishna Vanka7f563ff2012-03-20 22:04:19 +0530[diff] [blame]2400
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2401config MSM_STANDALONE_POWER_COLLAPSE
2402 bool "Enable standalone power collapse"
2403 default n
2404
2405config MSM_GSBI9_UART
2406 bool "Enable GSBI9 UART device"
2407 default n
2408 help
2409 This enables GSBI9 configured into UART.
2410
2411config MSM_SHARED_GPIO_FOR_UART2DM
2412 bool "Use shared GPIOs into UART mode"
2413 depends on (ARCH_MSM7X27A && !MMC_MSM_SDC3_8_BIT_SUPPORT && !MMC_MSM_SDC4_SUPPORT)
2414 help
2415 This option configures GPIO muxed with SDC4/MMC3
2416 8-bit mode into UART mode. It is used for serial
2417 console on UART2DM. Say Y if you want to have
2418 serial console on UART2DM.
2419
2420config MSM_SHOW_RESUME_IRQ
2421 bool "Enable logging of interrupts that could have caused resume"
Bryan Huntsmancc147032011-11-23 13:03:56 -0800[diff] [blame]2422 depends on (ARM_GIC || PMIC8058)
2423 default y if PMIC8058
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2424 default n
2425 help
2426 This option logs wake up interrupts that have triggered just before
2427 the resume loop unrolls. Say Y if you want to debug why the system
2428 resumed.
2429
2430config BT_MSM_PINTEST
2431 tristate "MSM Bluetooth Pin Connectivity Test"
2432 depends on ((ARCH_MSM8X60 || ARCH_MSM7X27A) && DEBUG_FS)
2433 default n
2434 help
2435 Bluetooth MSM Pin Connectivity test module.
2436 This driver provides support for verifying the MSM to BT pin
2437 connectivity.
2438
2439config MSM_FAKE_BATTERY
2440 depends on POWER_SUPPLY
2441 default n
2442 bool "MSM Fake Battery"
2443 help
2444 Enables MSM fake battery driver.
2445
2446config MSM_QDSP6_APR
2447 bool "Audio QDSP6 APR support"
2448 depends on MSM_SMD
2449 default n
2450 help
2451 Enable APR IPC protocol support between
2452 application processor and QDSP6. APR is
2453 used by audio driver to configure QDSP6's
2454 ASM, ADM and AFE.
2455
Joonwoo Park91d95462012-08-02 10:55:54 -0700[diff] [blame]2456config MSM_QDSP6_APRV2
2457 bool "Audio QDSP6 APRv2 support"
2458 depends on MSM_SMD
2459 default n
2460 help
2461 Enable APRv2 IPC protocol support between
2462 application processor and QDSP6. APR is
2463 used by audio driver to configure QDSP6's
2464 ASM, ADM and AFE.
2465
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]2466config MSM_QDSP6_CODECS
2467 bool "Audio Codecs on QDSP6 APR "
2468 depends on MSM_SMD
2469 default n
2470 help
2471 Enable Audio codecs with APR IPC protocol support between
2472 application processor and QDSP6. APR is
2473 used by audio driver to configure QDSP6's
2474 ASM, ADM and AFE.
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2475
Harmandeep Singhe5ddfe32012-05-26 09:39:25 -0700[diff] [blame]2476config MSM_QDSP6V2_CODECS
2477 bool "Audio QDSP6V2 APR support"
2478 depends on MSM_SMD
2479 help
2480 Enable Audio codecs with APR IPC protocol support between
2481 application processor and QDSP6 for B-family. APR is
2482 used by audio driver to configure QDSP6's
2483 ASM, ADM and AFE.
2484
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2485config MSM_AUDIO_QDSP6
2486 bool "QDSP6 HW Audio support"
2487 select SND_SOC_MSM_QDSP6_INTF
2488 default n
2489 help
2490 Enable HW audio support in QDSP6.
2491 QDSP6 can support HW encoder & decoder and audio processing
2492
Harmandeep Singhe5ddfe32012-05-26 09:39:25 -0700[diff] [blame]2493config MSM_AUDIO_QDSP6V2
2494 bool "QDSP6V2 HW Audio support"
2495 select SND_SOC_MSM_QDSP6V2_INTF
2496 help
2497 Enable HW audio support in QDSP6V2.
2498 QDSP6V2 can support HW encoder & decoder and
2499 audio processing. It will enable support for
2500 AAC, AMRNB, AMRWB, EVRC, MP3, QCELP among
2501 others.
2502
Joonwoo Park4a14a552012-08-02 11:03:21 -0700[diff] [blame]2503config MSM_ADSP_LOADER
2504 tristate "ADSP loader support"
2505 select SND_SOC_MSM_APRV2_INTF
2506 depends on MSM_AUDIO_QDSP6V2 && m
2507 help
2508 Enable ADSP image loader.
2509 The ADSP loader brings ADSP out of reset
2510 for the platforms that use APRv2.
2511 Say M if you want to enable this module.
2512
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]2513config MSM_ULTRASOUND_A
2514 bool "QDSP6 HW Ultrasound support"
Baruch Eruchimovitche9cbfc12011-10-09 19:47:08 +0200[diff] [blame]2515 help
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]2516 Enable HW ultrasound support in QDSP6.
2517 QDSP6 can support HW encoder & decoder and
2518 ultrasound processing. It will enable
2519 ultrasound data paths between
2520 HW and services, calculating input events
2521 upon the ultrasound data.
Baruch Eruchimovitche9cbfc12011-10-09 19:47:08 +0200[diff] [blame]2522
Baruch Eruchimovitch8c3f7802013-01-05 22:48:04 +0200[diff] [blame]2523config MSM_ULTRASOUND_B
2524 bool "QDSP6V2 HW Ultrasound support"
2525 help
2526 Enable HW Ultrasound support in QDSP6V2.
2527 QDSP6V2 can support HW encoder & decoder and
2528 ultrasound processing. It will enable
2529 ultrasound data paths between
2530 HW and services, calculating input events
2531 upon the ultrasound data.
2532
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2533config MSM_RPC_VIBRATOR
2534 bool "RPC based MSM Vibrator Support"
2535 depends on MSM_ONCRPCROUTER
2536 help
2537 Enable the vibrator support on MSM over RPC. The vibrator
2538 is connected on the PMIC. Say Y if you want to enable this
2539 feature.
2540
2541config PM8XXX_RPC_VIBRATOR
2542 bool "RPC based Vibrator on PM8xxx PMICs"
2543 depends on MSM_RPC_VIBRATOR
2544 help
2545 Enable the vibrator support on MSM over RPC. The vibrator
2546 is connected on the PM8XXX PMIC. Say Y if you want to enable
2547 this feature.
2548
2549config MSM_SPM_V1
2550 bool "Driver support for SPM Version 1"
2551 help
2552 Enables the support for Version 1 of the SPM driver. SPM hardware is
2553 used to manage the processor power during sleep. The driver allows
2554 configuring SPM to allow different power modes.
2555
2556config MSM_SPM_V2
2557 bool "Driver support for SPM Version 2"
2558 help
2559 Enables the support for Version 2 of the SPM driver. SPM hardware is
2560 used to manage the processor power during sleep. The driver allows
2561 configuring SPM to allow different power modes.
2562
2563config MSM_L2_SPM
2564 bool "SPM support for L2 cache"
2565 depends on MSM_SPM_V2
2566 help
2567 Enable SPM driver support for L2 cache. Some MSM chipsets allow
2568 control of L2 cache low power mode with a Subsystem Power manager.
2569 Enabling this driver allows configuring L2 SPM for low power modes
2570 on supported chipsets.
2571
Laura Abbott2d1760b2011-09-29 21:31:24 -0700[diff] [blame]2572config MSM_MULTIMEDIA_USE_ION
2573 bool "Multimedia suport using Ion"
2574 depends on ION_MSM
2575 help
2576 Enable support for multimedia drivers using Ion for buffer management
2577 instead of pmem. Selecting this may also involve userspace
2578 dependencies as well.
2579
Naveen Ramaraj51f5e8b2012-04-09 15:58:40 -0700[diff] [blame]2580config MSM_OCMEM
2581 bool "MSM On-Chip memory driver (OCMEM)"
2582 help
2583 Enable support for On-Chip Memory available on certain MSM chipsets.
2584 OCMEM is a low latency, high performance pool shared by subsystems.
2585
Naveen Ramaraj99b07562012-05-28 20:57:09 -0700[diff] [blame]2586config MSM_OCMEM_LOCAL_POWER_CTRL
2587 bool "OCMEM Local Power Control"
2588 depends on MSM_OCMEM
2589 help
2590 Enable direct power management of the OCMEM core by the
2591 OCMEM driver. By default power management is delegated to
2592 the RPM. Selecting this option causes the OCMEM driver to
2593 directly handle the various macro power transitions.
2594
2595config MSM_OCMEM_DEBUG
2596 bool "OCMEM Debug Support"
2597 depends on MSM_OCMEM
2598 help
2599 Enable debug options for On-chip Memory (OCMEM) driver.
2600 Various debug options include memory, power and latency.
2601 Choosing one of these options allows debugging of each
2602 individual subsystem separately.
2603
Naveen Ramarajc71b2de2012-08-20 12:35:52 -0700[diff] [blame]2604config MSM_OCMEM_NONSECURE
2605 bool "OCMEM Non Secure Mode"
2606 depends on MSM_OCMEM_DEBUG
2607 help
2608 Disable OCMEM interaction with secure processor.
2609 By default OCMEM is secured and accesses for each master
2610 is requested by the OCMEM driver. Selecting this option
2611 causes the OCMEM memory to be in non-secure state unless
2612 its locked down by the secure processor.
2613
Naveen Ramaraj99b07562012-05-28 20:57:09 -0700[diff] [blame]2614config MSM_OCMEM_POWER_DEBUG
2615 bool "OCMEM Power Debug Support"
2616 depends on MSM_OCMEM_DEBUG
2617 help
2618 Enable debug support for OCMEM power management.
2619 This adds support for verifying all power management
2620 related operations of OCMEM. Both local power management
2621 and RPM assisted power management operations are supported.
2622
Naveen Ramaraj4b1d9392012-08-06 21:05:14 -0700[diff] [blame]2623config MSM_OCMEM_POWER_DISABLE
2624 bool "OCMEM Disable Power Control"
2625 depends on MSM_OCMEM_DEBUG
2626 help
2627 Disable all OCMEM power management.
2628 This keeps all OCMEM macros turned ON at all times thus
2629 never allowing them to be turned OFF. Both local power
2630 management and RPM assisted power modes are supported.
2631
Naveen Ramaraj88f23632012-10-10 12:23:29 -0700[diff] [blame]2632config SENSORS_ADSP
2633 bool "Enable Sensors Driver Support for ADSP"
2634 help
2635 Add support for sensors ADSP driver.
2636 This driver is used for exercising different sensors use cases,
2637 such as for lower-power OCMEM use cases, and for time syncing
2638 with ADSP clock.
2639
Laura Abbottad340ff2012-01-04 14:23:48 -0800[diff] [blame]2640config MSM_RTB
2641 bool "Register tracing"
2642 help
2643 Add support for logging different events to a small uncached
2644 region. This is designed to aid in debugging reset cases where the
2645 caches may not be flushed before the target resets.
2646
2647config MSM_RTB_SEPARATE_CPUS
2648 bool "Separate entries for each cpu"
2649 depends on MSM_RTB
Laura Abbott9959f982012-02-28 11:30:50 -0800[diff] [blame]2650 depends on SMP
Laura Abbottad340ff2012-01-04 14:23:48 -0800[diff] [blame]2651 help
2652 Under some circumstances, it may be beneficial to give dedicated space
2653 for each cpu to log accesses. Selecting this option will log each cpu
2654 separately. This will guarantee that the last acesses for each cpu
2655 will be logged but there will be fewer entries per cpu
2656
Stepan Moskovchenko57884842012-06-07 17:35:49 -0700[diff] [blame]2657config MSM_EBI_ERP
2658 bool "External Bus Interface (EBI) error reporting"
2659 help
2660 Say 'Y' here to enable reporting of external bus interface errors to
2661 the kernel log. Information such as the offending address and
2662 transaction type will be logged. This may be useful for debugging
2663 seemingly broken memory accesses.
2664
2665 For production builds, you should probably say 'N' here.
2666
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2667config MSM_CACHE_ERP
2668 bool "Cache / CPU error reporting"
2669 depends on ARCH_MSM_KRAIT
2670 help
2671 Say 'Y' here to enable reporting of cache and TLB errors to the kernel
2672 log. Enabling this feature can be used as a system debugging technique
2673 if cache corruption is suspected. Cache error statistics will also be
2674 reported in /proc/cpu/msm_cache_erp.
2675
2676 For production builds, you should probably say 'N' here.
2677
2678config MSM_L1_ERR_PANIC
Stepan Moskovchenko1b0c1742012-04-30 14:53:16 -0700[diff] [blame]2679 bool "Panic on L1 cache errors"
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2680 depends on MSM_CACHE_ERP
2681 help
Stepan Moskovchenko1b0c1742012-04-30 14:53:16 -0700[diff] [blame]2682 To cause the kernel to panic whenever an L1 cache error is detected, say
2683 'Y' here. This may be useful as a debugging technique if general system
2684 instability is suspected.
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2685
2686 For production builds, you should probably say 'N' here.
2687
Stepan Moskovchenkoe1aba3d2012-12-06 18:40:25 -0800[diff] [blame]2688config MSM_L1_RECOV_ERR_PANIC
2689 bool "Panic on recoverable L1 cache errors"
2690 depends on MSM_CACHE_ERP && MSM_L1_ERR_PANIC
2691 help
2692 Certain CPU designs may be able to automatically recover from certain
2693 kinds of L1 cache errors, even though the L1 cache itself may not
2694 support error correction. These errors should not result in any kind
2695 of corruption, but their presence is nevertheless an indication of
2696 poor system health. To cause the kernel to panic whenever a
2697 recoverable L1 cache error is detected, say 'Y' here. This may be
2698 useful as a debugging technique if general system instability is
2699 suspected.
2700
2701 For production builds, you should definitely say 'N' here.
2702
Stepan Moskovchenko7035f652012-05-31 17:48:01 -0700[diff] [blame]2703config MSM_L1_ERR_LOG
2704 bool "Log CPU ERP events to system memory"
2705 depends on MSM_CACHE_ERP
2706 help
2707 Enable logging CPU ERP events to an area of memory that will be
2708 preserved across a system reset. This may be useful for detecting and
2709 troubleshooting ERP-related system crashes in the field.
2710
2711 For production builds, you may want to say 'Y' here.
2712
Stepan Moskovchenkoe9a5dc12012-04-03 20:25:49 -0700[diff] [blame]2713config MSM_L2_ERP_PRINT_ACCESS_ERRORS
2714 bool "Report L2 master port slave/decode errors in kernel log"
2715 depends on MSM_CACHE_ERP
2716 help
2717 Master port errors can occur when a memory request is not properly
2718 handled by the destination slave. This can occur if the destination
2719 register does not exist or is inaccessible due to security
2720 restrictions or (in some cases) clock configuration. Enabling this
2721 option will cause a backtrace to be printed to the kernel log whenever
2722 such an error is encountered. Note that the error is reported as an
2723 interrupt rather than as an exception, meaning that the backtrace may
2724 have some skid. This option may help with debugging, though production
2725 builds should probably say 'N' here.
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2726
2727config MSM_L2_ERP_PORT_PANIC
2728 bool "Panic on L2 master port errors"
Stepan Moskovchenkoe9a5dc12012-04-03 20:25:49 -0700[diff] [blame]2729 depends on MSM_CACHE_ERP && MSM_L2_ERP_PRINT_ACCESS_ERRORS
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2730 help
2731 Master port errors can occur when a memory request is not properly
2732 handled by the destination slave. Enable this option to catch drivers
2733 which attempt to access bad areas of the address space, or access
2734 hardware registers in an improper state (such as certain clocks not
2735 being on). This option may help with debugging, though production
2736 builds should probably say 'N' here.
2737
2738config MSM_L2_ERP_1BIT_PANIC
2739 bool "Panic on recoverable L2 soft errors"
2740 depends on MSM_CACHE_ERP
2741 help
2742 Enable this option to cause a kernel panic whenever the L2 cache
2743 encounters a single-bit (correctable) soft error. This option should
2744 only be enabled when doing low-level debugging where cache corruption
2745 is suspected.
2746
2747 For production builds, you should definitely say 'N' here.
2748
2749config MSM_L2_ERP_2BIT_PANIC
2750 bool "Panic on unrecoverable L2 soft errors"
2751 depends on MSM_CACHE_ERP
2752 help
2753 Enable this option to cause a kernel panic whenever the L2 cache
2754 encounters a double-bit (non-correctable) soft error. Debug builds
2755 will likely benefit from having this option enabled to catch cache
2756 problems as soon as possible.
2757
2758 For production builds, it may be acceptable to say 'N' here, since
2759 an uncorrectable error might not necessarily cause further problems.
Laura Abbottad340ff2012-01-04 14:23:48 -0800[diff] [blame]2760
Praveen Chidambaramf53ef1b2011-12-06 08:27:49 -0700[diff] [blame]2761config MSM_DCVS
2762 bool "Use MSM DCVS for CPU/GPU Frequency control"
2763 depends on MSM_SCM
2764 help
2765 Enable support for MSM DCVS to control all CPU and GPU core frequencies.
2766 The DCVS manager allows idle driver to feed the idle information to the
2767 algorithm and the algorithm returns a frequency for the core which is
2768 passed to the frequency change driver.
2769
Pankaj Kumar32ce1ea2012-04-04 20:29:29 +0530[diff] [blame]2770config MSM_CPR
2771 tristate "Use MSM CPR in S/W mode"
2772 help
2773 Enable CPR (core power reduction) in S/W mode, where the processor
2774 get's the notification from CPR block and programs the PMIC.
2775
2776config MSM_VP_REGULATOR
2777 tristate "Use MSM PMIC8029 C2 regulator"
2778 depends on ARCH_MSM8625
2779 help
2780 Enable MSM PMIC8029 C2 regulator support using APC_PLEVEL access
2781 for MSMs like 8625.
2782
Taniya Dasc43e6872012-03-21 16:41:14 +0530[diff] [blame]2783config HAVE_ARCH_HAS_CURRENT_TIMER
2784 bool
Laura Abbott306bcc22012-03-08 11:24:53 -0800[diff] [blame]2785
2786config MSM_CACHE_DUMP
2787 bool "Cache dumping support"
2788 help
2789 Add infrastructure to dump the L1 and L2 caches to an allocated buffer.
2790 This allows for analysis of the caches in case cache corruption is
2791 suspected.
2792
Laura Abbott7b637362012-03-29 16:43:49 -0700[diff] [blame]2793config MSM_CACHE_DUMP_ON_PANIC
2794 bool "Dump caches on panic"
2795 depends on MSM_CACHE_DUMP
2796 help
2797 By default, the caches are flushed on panic. This means that trying to
2798 look at them in a RAM dump will give useless data. Select this if you
2799 want to dump the L1 and L2 caches on panic before any flush occurs.
2800 If unsure, say N
2801
Jack Phamccbbfab2012-04-09 19:50:20 -0700[diff] [blame]2802config MSM_HSIC_SYSMON
2803 tristate "MSM HSIC system monitor driver"
2804 depends on USB
2805 help
2806 Add support for bridging with the system monitor interface of MDM
2807 over HSIC. This driver allows the local system monitor to
2808 communicate with the remote system monitor interface.
2809
2810config MSM_HSIC_SYSMON_TEST
2811 tristate "MSM HSIC system monitor bridge test"
2812 depends on USB && MSM_HSIC_SYSMON && DEBUG_FS
2813 help
2814 Enable the test hook for the Qualcomm system monitor HSIC driver.
2815 This will create a debugfs file entry named "hsic_sysmon_test" which
2816 can be read and written to send character data to the sysmon port of
2817 the modem over USB.
2818
Anirudh Ghayal0d2291a2012-09-20 21:31:41 +0530[diff] [blame]2819config MSM_RPC_PMIC
2820 tristate "MSM RPC PMIC driver"
2821 depends on MSM_ONCRPCROUTER
2822 help
2823 This driver supports the PMIC functionality over RPC for those MSM's
2824 which do not have a direct access to PMIC. It supports ability to
2825 configure MPP, GPIO and all the other supported peripherals of the
2826 PMIC.
2827
Anirudh Ghayald3a63732012-09-20 22:13:13 +0530[diff] [blame]2828config MSM_RPC_USB
2829 tristate "MSM RPC USB driver"
2830 depends on MSM_ONCRPCROUTER
2831 help
2832 This driver supports the USB configuration support over the RPC
2833 interface. It support the HS USB module connected to the MSM
2834 and FS USB which is connected over the PMIC. This support is
2835 required for MSMs on which the APPS does not have a direct access
2836 to the PMIC.
2837
2838config MSM_RPC_PMAPP
2839 tristate "MSM RPC PMIC APP driver"
2840 depends on MSM_ONCRPCROUTER
2841 help
2842 This driver supports the configuration of various PMIC APP modules
2843 such as display backlight, vreg pin-ctrl, smps clock over the RPC
2844 interface. This support is required for MSMs on which the APPS
2845 does not have a direct access to the PMIC.
Pushkar Joshi0fc73462012-09-26 17:59:31 -0700[diff] [blame]2846
2847config MSM_ENABLE_WDOG_DEBUG_CONTROL
Pratik Patele08204d2013-03-12 17:43:56 -0700[diff] [blame]2848 bool "Enable control of watchdog debug and boot partition select"
Pushkar Joshi0fc73462012-09-26 17:59:31 -0700[diff] [blame]2849 help
Pratik Patele08204d2013-03-12 17:43:56 -0700[diff] [blame]2850 Enables support for controlling watchdog debug and boot partition
2851 select. This is currently used to bypass debug image for PS_HOLD reset
2852 by disabling watchdog debug and boot partition select. This allows
2853 for a clean MSM reset for reboot scenarios.
Taniya Dasea4263f92012-08-22 18:52:51 +0530[diff] [blame]2854
2855config MSM_FIQ
2856 bool "Enable FIQ for debugging"
2857 depends on ARCH_MSM8625
2858 select FIQ
Taniya Das36e4aa12012-07-04 18:27:16 +0530[diff] [blame]2859 select GIC_SECURE
Taniya Dasea4263f92012-08-22 18:52:51 +0530[diff] [blame]2860 help
2861 Enable any line to be used as an FIQ. This will help debugging
2862 if apps is not responding and holding lock with irqs disabled.
2863 Modem will then generate an raise a FIQ on this line before sending
2864 SMSM reset.
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]2865
2866config MSM_USE_USER_ACCESSIBLE_TIMERS
2867 bool "Enables mapping an MSM timer counter page to user space."
2868 depends on ARM_USE_USER_ACCESSIBLE_TIMERS
2869 help
2870 Enables MSM-specific user accessible timers via a shared
2871 memory page containing the cycle counter.
2872
Sidipotu Ashokbf84d4d2012-11-06 17:13:28 +0530[diff] [blame]2873config USE_DEV_CTRL_VOLUME
2874 bool "Use Device Control Volume"
2875 help
2876 Use Device Control Volume as opposed to ALSA volume control.
2877
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]2878config MSM_CPU_PWRCTL
2879 bool "Ensures that krait droop detectors are always off"
2880 help
2881 Droop detector mechanism can adversely affect krait plls during
2882 stand alone power collapse operation. Selecting this option
2883 ensures that they are always off.
2884
Saket Saurabh6089f952012-12-07 15:49:13 +0530[diff] [blame]2885config MSM_UARTDM_Core_v14
2886 bool "Use MSM BLSP based HSUART Core v1.4"
2887 depends on SERIAL_MSM_HS
2888 help
2889 Select if BLSP based UART Core v.14 or higher is present.
Abhimanyu Kapurcf3ed152013-03-01 19:32:19 -0800[diff] [blame]2890
2891config MSM_BOOT_STATS
2892 bool "Use MSM boot stats reporting"
2893 help
2894 Use this to report msm boot stats such as bootloader throughput,
2895 display init, total boot time.
2896 This figures are reported in mpm sleep clock cycles and have a
2897 resolution of 31 bits as 1 bit is used as an overflow check.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2898endif