Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 6cef30034c32ebe448c844089c4168c411feeb63 / . / drivers / regulator / Kconfig
blob: dfe58096b374a22fbeb001a1f430cb6afb2d1461 [file] [log] [blame]
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]1menuconfig REGULATOR
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]2 bool "Voltage and Current Regulator Support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]3 help
4 Generic Voltage and Current Regulator support.
5
6 This framework is designed to provide a generic interface to voltage
7 and current regulators within the Linux kernel. It's intended to
8 provide voltage and current control to client or consumer drivers and
9 also provide status information to user space applications through a
10 sysfs interface.
11
12 The intention is to allow systems to dynamically control regulator
13 output in order to save power and prolong battery life. This applies
14 to both voltage regulators (where voltage output is controllable) and
15 current sinks (where current output is controllable).
16
17 This framework safely compiles out if not selected so that client
18 drivers can still be used in systems with no software controllable
19 regulators.
20
21 If unsure, say no.
22
Mark Brown809d3102012-06-20 11:08:43 +0100[diff] [blame]23
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]24if REGULATOR
25
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]26config REGULATOR_DEBUG
27 bool "Regulator debug support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]28 help
29 Say yes here to enable debugging support.
30
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]31config REGULATOR_DUMMY
32 bool "Provide a dummy regulator if regulator lookups fail"
33 help
34 If this option is enabled then when a regulator lookup fails
35 and the board has not specified that it has provided full
Mark Brown4f842f62012-07-26 15:50:49 +0100[diff] [blame]36 constraints the regulator core will provide an always
37 enabled dummy regulator, allowing consumer drivers to continue.
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]38
39 A warning will be generated when this substitution is done.
40
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]41config REGULATOR_FIXED_VOLTAGE
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]42 tristate "Fixed voltage regulator support"
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]43 help
44 This driver provides support for fixed voltage regulators,
45 useful for systems which use a combination of software
46 managed regulators and simple non-configurable regulators.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]47
48config REGULATOR_VIRTUAL_CONSUMER
49 tristate "Virtual regulator consumer support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]50 help
51 This driver provides a virtual consumer for the voltage and
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]52 current regulator API which provides sysfs controls for
53 configuring the supplies requested. This is mainly useful
54 for test purposes.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]55
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]56 If unsure, say no.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]57
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]58config REGULATOR_USERSPACE_CONSUMER
59 tristate "Userspace regulator consumer support"
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]60 help
61 There are some classes of devices that are controlled entirely
Michael Prokop6f2653e2009-09-05 02:59:14 +0200[diff] [blame]62 from user space. Userspace consumer driver provides ability to
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]63 control power supplies for such devices.
64
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]65 If unsure, say no.
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]66
Chao Xie95f1dc02013-07-17 23:07:03 -0400[diff] [blame]67config REGULATOR_88PM800
68 tristate "Marvell 88PM800 Power regulators"
Axel Lin7c45f602013-07-19 09:17:53 +0800[diff] [blame]69 depends on MFD_88PM800
Chao Xie95f1dc02013-07-17 23:07:03 -0400[diff] [blame]70 help
71 This driver supports Marvell 88PM800 voltage regulator chips.
72 It delivers digitally programmable output,
73 the voltage is programmed via I2C interface.
74 It's suitable to support PXA988 chips to control VCC_MAIN and
75 various voltages.
76
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]77config REGULATOR_88PM8607
Mark Brown631a1fc2013-07-29 16:49:46 +0100[diff] [blame]78 tristate "Marvell 88PM8607 Power regulators"
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]79 depends on MFD_88PM860X=y
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]80 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]81 This driver supports 88PM8607 voltage regulator chips.
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]82
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]83config REGULATOR_AD5398
84 tristate "Analog Devices AD5398/AD5821 regulators"
85 depends on I2C
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]86 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]87 This driver supports AD5398 and AD5821 current regulator chips.
88 If building into module, its name is ad5398.ko.
89
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]90config REGULATOR_ANATOP
91 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
92 depends on MFD_SYSCON
93 help
94 Say y here to support Freescale i.MX on-chip ANATOP LDOs
95 regulators. It is recommended that this option be
96 enabled on i.MX6 platform.
97
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]98config REGULATOR_AAT2870
99 tristate "AnalogicTech AAT2870 Regulators"
100 depends on MFD_AAT2870_CORE
101 help
102 If you have a AnalogicTech AAT2870 say Y to enable the
103 regulator driver.
104
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]105config REGULATOR_AB3100
106 tristate "ST-Ericsson AB3100 Regulator functions"
107 depends on AB3100_CORE
108 default y if AB3100_CORE
109 help
110 These regulators correspond to functionality in the
111 AB3100 analog baseband dealing with power regulators
112 for the system.
113
114config REGULATOR_AB8500
115 bool "ST-Ericsson AB8500 Power Regulators"
116 depends on AB8500_CORE
117 help
118 This driver supports the regulators found on the ST-Ericsson mixed
119 signal AB8500 PMIC
120
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]121config REGULATOR_ARIZONA
122 tristate "Wolfson Arizona class devices"
123 depends on MFD_ARIZONA
Mark Browne6ed9052013-01-10 19:14:11 +0000[diff] [blame]124 depends on SND_SOC
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]125 help
126 Support for the regulators found on Wolfson Arizona class
127 devices.
128
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]129config REGULATOR_AS3711
130 tristate "AS3711 PMIC"
131 depends on MFD_AS3711
132 help
133 This driver provides support for the voltage regulators on the
134 AS3711 PMIC
135
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]136config REGULATOR_DA903X
137 tristate "Dialog Semiconductor DA9030/DA9034 regulators"
138 depends on PMIC_DA903X
139 help
140 Say y here to support the BUCKs and LDOs regulators found on
141 Dialog Semiconductor DA9030/DA9034 PMIC.
142
143config REGULATOR_DA9052
144 tristate "Dialog Semiconductor DA9052/DA9053 regulators"
145 depends on PMIC_DA9052
146 help
147 This driver supports the voltage regulators of DA9052-BC and
148 DA9053-AA/Bx PMIC.
149
Ashish Jangamf6130be2012-11-01 13:57:56 +0530[diff] [blame]150config REGULATOR_DA9055
151 tristate "Dialog Semiconductor DA9055 regulators"
152 depends on MFD_DA9055
153 help
154 Say y here to support the BUCKs and LDOs regulators found on
155 Dialog Semiconductor DA9055 PMIC.
156
157 This driver can also be built as a module. If so, the module
158 will be called da9055-regulator.
159
Krystian Garbaciak69ca3e52013-07-29 19:00:45 +0200[diff] [blame]160config REGULATOR_DA9063
161 tristate "Dialog Semiconductor DA9063 regulators"
162 depends on MFD_DA9063
163 help
164 Say y here to support the BUCKs and LDOs regulators found on
165 DA9063 PMICs.
166
167 This driver can also be built as a module. If so, the module
168 will be called da9063-regulator.
169
Steve Twiss16f10912013-08-06 15:30:48 +0100[diff] [blame]170config REGULATOR_DA9210
171 tristate "Dialog Semiconductor DA9210 regulator"
172 depends on I2C
173 select REGMAP_I2C
174 help
175 Say y here to support for the Dialog Semiconductor DA9210.
176 The DA9210 is a multi-phase synchronous step down
177 converter 12A DC-DC Buck controlled through an I2C
178 interface.
179
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]180config REGULATOR_DBX500_PRCMU
181 bool
182
183config REGULATOR_DB8500_PRCMU
184 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
185 depends on MFD_DB8500_PRCMU
186 select REGULATOR_DBX500_PRCMU
187 help
188 This driver supports the voltage domain regulators controlled by the
189 DB8500 PRCMU
190
Yunfan Zhang49d8c592012-09-08 03:52:18 -0700[diff] [blame]191config REGULATOR_FAN53555
192 tristate "Fairchild FAN53555 Regulator"
193 depends on I2C
194 select REGMAP_I2C
195 help
196 This driver supports Fairchild FAN53555 Digitally Programmable
197 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
198 regulator that delivers a digitally programmable output from an
199 input voltage supply of 2.5V to 5.5V. The output voltage is
200 programmed through an I2C interface.
201
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]202config REGULATOR_GPIO
203 tristate "GPIO regulator support"
204 depends on GPIOLIB
Ying-Chun Liu (PaulLiu)e3e5aff2012-03-14 10:29:12 +0800[diff] [blame]205 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]206 This driver provides support for regulators that can be
207 controlled via gpios.
208 It is capable of supporting current and voltage regulators
209 and the platform has to provide a mapping of GPIO-states
210 to target volts/amps.
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]211
212config REGULATOR_ISL6271A
213 tristate "Intersil ISL6271A Power regulator"
214 depends on I2C
215 help
216 This driver supports ISL6271A voltage regulator chip.
217
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]218config REGULATOR_LP3971
219 tristate "National Semiconductors LP3971 PMIC regulator driver"
220 depends on I2C
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]221 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]222 Say Y here to support the voltage regulators and convertors
223 on National Semiconductors LP3971 PMIC
224
225config REGULATOR_LP3972
226 tristate "National Semiconductors LP3972 PMIC regulator driver"
227 depends on I2C
228 help
229 Say Y here to support the voltage regulators and convertors
230 on National Semiconductors LP3972 PMIC
231
232config REGULATOR_LP872X
Mark Brown631a1fc2013-07-29 16:49:46 +0100[diff] [blame]233 tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
Axel Lin613965f2013-08-30 22:13:44 +0800[diff] [blame]234 depends on I2C
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]235 select REGMAP_I2C
236 help
237 This driver supports LP8720/LP8725 PMIC
238
239config REGULATOR_LP8755
240 tristate "TI LP8755 High Performance PMU driver"
241 depends on I2C
242 select REGMAP_I2C
243 help
244 This driver supports LP8755 High Performance PMU driver. This
245 chip contains six step-down DC/DC converters which can support
246 9 mode multiphase configuration.
247
248config REGULATOR_LP8788
Mark Brown631a1fc2013-07-29 16:49:46 +0100[diff] [blame]249 tristate "TI LP8788 Power Regulators"
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]250 depends on MFD_LP8788
251 help
252 This driver supports LP8788 voltage regulator chip.
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]253
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]254config REGULATOR_MAX1586
255 tristate "Maxim 1586/1587 voltage regulator"
256 depends on I2C
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]257 help
258 This driver controls a Maxim 1586 or 1587 voltage output
259 regulator via I2C bus. The provided regulator is suitable
260 for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
261
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]262config REGULATOR_MAX8649
263 tristate "Maxim 8649 voltage regulator"
264 depends on I2C
Jonghwan Choic5b68d472011-10-24 22:26:26 +0900[diff] [blame]265 select REGMAP_I2C
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]266 help
267 This driver controls a Maxim 8649 voltage output regulator via
268 I2C bus.
269
Wolfram Sang27f37e42009-09-25 09:39:26 +0200[diff] [blame]270config REGULATOR_MAX8660
271 tristate "Maxim 8660/8661 voltage regulator"
272 depends on I2C
273 help
274 This driver controls a Maxim 8660/8661 voltage output
275 regulator via I2C bus.
276
Gyungoh Yooffee1902012-08-09 14:24:34 -0600[diff] [blame]277config REGULATOR_MAX8907
278 tristate "Maxim 8907 voltage regulator"
279 depends on MFD_MAX8907
280 help
281 This driver controls a Maxim 8907 voltage output regulator
282 via I2C bus. The provided regulator is suitable for Tegra
283 chip to control Step-Down DC-DC and LDOs.
284
Haojian Zhuang08ff6f22010-01-11 13:10:08 +0100[diff] [blame]285config REGULATOR_MAX8925
286 tristate "Maxim MAX8925 Power Management IC"
287 depends on MFD_MAX8925
288 help
289 Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
290
MyungJoo Ham202f4f52010-08-20 14:43:56 +0900[diff] [blame]291config REGULATOR_MAX8952
292 tristate "Maxim MAX8952 Power Management IC"
293 depends on I2C
294 help
295 This driver controls a Maxim 8952 voltage output regulator
296 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
297 modes ranging from 0.77V to 1.40V by 0.01V steps.
298
Laxman Dewangan5928f532012-11-19 06:58:29 +0530[diff] [blame]299config REGULATOR_MAX8973
300 tristate "Maxim MAX8973 voltage regulator "
301 depends on I2C
302 select REGMAP_I2C
303 help
304 The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
305 switching regulator delievers up to 9A of output current. Each
306 phase operates at a 2MHz fixed frequency with a 120 deg shift
307 from the adjacent phase, allowing the use of small magnetic component.
308
MyungJoo Hambd6ca2c2011-03-11 11:34:44 +0900[diff] [blame]309config REGULATOR_MAX8997
310 tristate "Maxim 8997/8966 regulator"
311 depends on MFD_MAX8997
312 help
313 This driver controls a Maxim 8997/8966 regulator
314 via I2C bus. The provided regulator is suitable for S5PC110,
315 S5PV210, and Exynos-4 chips to control VCC_CORE and
316 VCC_USIM voltages.
317
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]318config REGULATOR_MAX8998
319 tristate "Maxim 8998 voltage regulator"
Marek Szyprowski69f71002010-06-21 10:04:23 +0200[diff] [blame]320 depends on MFD_MAX8998
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]321 help
322 This driver controls a Maxim 8998 voltage output regulator
323 via I2C bus. The provided regulator is suitable for S3C6410
324 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
325
Jonghwa Lee133d4012012-06-01 13:17:14 +0900[diff] [blame]326config REGULATOR_MAX77686
327 tristate "Maxim 77686 regulator"
328 depends on MFD_MAX77686
329 help
330 This driver controls a Maxim 77686 regulator
331 via I2C bus. The provided regulator is suitable for
332 Exynos-4 chips to control VARM and VINT voltages.
333
Jonghwa Lee80b022e2013-06-25 10:08:38 +0900[diff] [blame]334config REGULATOR_MAX77693
335 tristate "Maxim MAX77693 regulator"
336 depends on MFD_MAX77693
337 help
338 This driver controls a Maxim 77693 regulator via I2C bus.
339 The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
340 and one current regulator 'CHARGER'. This is suitable for
341 Exynos-4x12 chips.
342
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]343config REGULATOR_MC13XXX_CORE
344 tristate
345
346config REGULATOR_MC13783
347 tristate "Freescale MC13783 regulator driver"
348 depends on MFD_MC13783
349 select REGULATOR_MC13XXX_CORE
350 help
351 Say y here to support the regulators found on the Freescale MC13783
352 PMIC.
353
354config REGULATOR_MC13892
355 tristate "Freescale MC13892 regulator driver"
356 depends on MFD_MC13XXX
357 select REGULATOR_MC13XXX_CORE
358 help
359 Say y here to support the regulators found on the Freescale MC13892
360 PMIC.
361
362config REGULATOR_PALMAS
363 tristate "TI Palmas PMIC Regulators"
364 depends on MFD_PALMAS
365 help
366 If you wish to control the regulators on the Palmas series of
367 chips say Y here. This will enable support for all the software
368 controllable SMPS/LDO regulators.
369
370 The regulators available on Palmas series chips vary depending
371 on the muxing. This is handled automatically in the driver by
372 reading the mux info from OTP.
373
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]374config REGULATOR_PCAP
375 tristate "Motorola PCAP2 regulator driver"
376 depends on EZX_PCAP
Sangbeom Kim62aa4922012-01-13 10:13:13 +0900[diff] [blame]377 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]378 This driver provides support for the voltage regulators of the
379 PCAP2 PMIC.
Balaji Rao5ec271e2009-01-09 01:51:01 +0100[diff] [blame]380
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]381config REGULATOR_PCF50633
382 tristate "NXP PCF50633 regulator driver"
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]383 depends on MFD_PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]384 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]385 Say Y here to support the voltage regulators and convertors
386 on PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]387
Robin Gong3784b6d2013-07-25 11:33:18 +0800[diff] [blame]388config REGULATOR_PFUZE100
389 tristate "Support regulators on Freescale PFUZE100 PMIC"
390 depends on I2C
Axel Lin94421b02013-07-29 12:08:01 +0800[diff] [blame]391 select REGMAP_I2C
Robin Gong3784b6d2013-07-25 11:33:18 +0800[diff] [blame]392 help
393 Say y here to support the regulators found on the Freescale PFUZE100
394 PMIC.
395
Laxman Dewangan6ffc3272012-04-04 12:44:00 +0530[diff] [blame]396config REGULATOR_RC5T583
397 tristate "RICOH RC5T583 Power regulators"
398 depends on MFD_RC5T583
399 help
400 Select this option to enable the power regulator of RICOH
401 PMIC RC5T583.
402 This driver supports the control of different power rails of device
403 through regulator interface. The device supports multiple DCDC/LDO
404 outputs which can be controlled by i2c communication.
405
Sangbeom Kimcb746852012-07-11 21:08:17 +0900[diff] [blame]406config REGULATOR_S2MPS11
407 tristate "Samsung S2MPS11 voltage regulator"
408 depends on MFD_SEC_CORE
409 help
410 This driver supports a Samsung S2MPS11 voltage output regulator
411 via I2C bus. S2MPS11 is comprised of high efficient Buck converters
412 including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
413
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]414config REGULATOR_S5M8767
415 tristate "Samsung S5M8767A voltage regulator"
Sangbeom Kim66c9fbb2012-07-11 21:06:40 +0900[diff] [blame]416 depends on MFD_SEC_CORE
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]417 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]418 This driver supports a Samsung S5M8767A voltage output regulator
419 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
420 supports DVS mode with 8bits of output voltage control.
Yong Shen5e428d52010-12-14 14:00:55 +0800[diff] [blame]421
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]422config REGULATOR_TI_ABB
Mark Brown631a1fc2013-07-29 16:49:46 +0100[diff] [blame]423 tristate "TI Adaptive Body Bias on-chip LDO"
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]424 depends on ARCH_OMAP
Linus Walleijd619bc12009-09-09 11:31:00 +0200[diff] [blame]425 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]426 Select this option to support Texas Instruments' on-chip Adaptive Body
427 Bias (ABB) LDO regulators. It is recommended that this option be
428 enabled on required TI SoC. Certain Operating Performance Points
429 on TI SoCs may be unstable without enabling this as it provides
430 device specific optimized bias to allow/optimize functionality.
Graeme Gregory4c5dabc2012-05-15 15:48:59 +0900[diff] [blame]431
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]432config REGULATOR_TPS51632
433 tristate "TI TPS51632 Power Regulator"
434 depends on I2C
435 select REGMAP_I2C
436 help
437 This driver supports TPS51632 voltage regulator chip.
Axel Lin7bde7672012-11-01 14:02:36 +0800[diff] [blame]438 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]439 with Serial VID control and DVFS.
440 The voltage output can be configure through I2C interface or PWM
441 interface.
442
Linus Walleij2edd3b62011-03-09 12:02:55 +0000[diff] [blame]443config REGULATOR_TPS6105X
444 tristate "TI TPS6105X Power regulators"
445 depends on TPS6105X
446 default y if TPS6105X
447 help
448 This driver supports TPS61050/TPS61052 voltage regulator chips.
449 It is a single boost converter primarily for white LEDs and
450 audio amplifiers.
451
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]452config REGULATOR_TPS62360
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]453 tristate "TI TPS6236x Power Regulator"
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]454 depends on I2C
455 select REGMAP_I2C
456 help
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]457 This driver supports TPS6236x voltage regulator chip. This
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]458 regulator is meant for processor core supply. This chip is
459 high-frequency synchronous step down dc-dc converter optimized
460 for battery-powered portable applications.
461
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]462config REGULATOR_TPS65023
463 tristate "TI TPS65023 Power regulators"
464 depends on I2C
Mark Brown90923352011-06-18 01:18:51 +0100[diff] [blame]465 select REGMAP_I2C
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]466 help
467 This driver supports TPS65023 voltage regulator chips. TPS65023 provides
468 three step-down converters and two general-purpose LDO voltage regulators.
469 It supports TI's software based Class-2 SmartReflex implementation.
470
471config REGULATOR_TPS6507X
472 tristate "TI TPS6507X Power regulators"
473 depends on I2C
474 help
475 This driver supports TPS6507X voltage regulator chips. TPS6507X provides
476 three step-down converters and two general-purpose LDO voltage regulators.
477 It supports TI's software based Class-2 SmartReflex implementation.
478
Venu Byravarasu452534e2012-03-22 18:34:09 +0530[diff] [blame]479config REGULATOR_TPS65090
480 tristate "TI TPS65090 Power regulator"
481 depends on MFD_TPS65090
482 help
483 This driver provides support for the voltage regulators on the
484 TI TPS65090 PMIC.
485
AnilKumar Cha4930772012-01-11 16:11:49 +0530[diff] [blame]486config REGULATOR_TPS65217
487 tristate "TI TPS65217 Power regulators"
488 depends on MFD_TPS65217
489 help
490 This driver supports TPS65217 voltage regulator chips. TPS65217
491 provides three step-down converters and four general-purpose LDO
492 voltage regulators. It supports software based voltage control
493 for different voltage domains
494
Cyril Chemparathy1394fd22010-12-07 12:04:11 -0500[diff] [blame]495config REGULATOR_TPS6524X
496 tristate "TI TPS6524X Power regulators"
497 depends on SPI
498 help
499 This driver supports TPS6524X voltage regulator chips. TPS6524X
500 provides three step-down converters and two general-purpose LDO
501 voltage regulators. This device is interfaced using a customized
502 serial interface currently supported on the sequencer serial
503 port controller.
504
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]505config REGULATOR_TPS6586X
506 tristate "TI TPS6586X Power regulators"
507 depends on MFD_TPS6586X
508 help
509 This driver supports TPS6586X voltage regulator chips.
510
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]511config REGULATOR_TPS65910
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]512 tristate "TI TPS65910/TPS65911 Power Regulators"
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]513 depends on MFD_TPS65910
514 help
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]515 This driver supports TPS65910/TPS65911 voltage regulator chips.
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]516
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]517config REGULATOR_TPS65912
518 tristate "TI TPS65912 Power regulator"
519 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]520 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]521 This driver supports TPS65912 voltage regulator chip.
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]522
Laxman Dewangan1a0bb672012-11-11 20:42:01 +0530[diff] [blame]523config REGULATOR_TPS80031
524 tristate "TI TPS80031/TPS80032 power regualtor driver"
525 depends on MFD_TPS80031
526 help
527 TPS80031/ TPS80032 Fully Integrated Power Management with Power
528 Path and Battery Charger. It has 5 configurable step-down
529 converters, 11 general purpose LDOs, VBUS generator and digital
530 output to control regulators.
531
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]532config REGULATOR_TWL4030
Mark Brown631a1fc2013-07-29 16:49:46 +0100[diff] [blame]533 tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]534 depends on TWL4030_CORE
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]535 help
536 This driver supports the voltage regulators provided by
537 this family of companion chips.
538
Pawel Moll31e54082012-09-24 18:56:54 +0100[diff] [blame]539config REGULATOR_VEXPRESS
540 tristate "Versatile Express regulators"
541 depends on VEXPRESS_CONFIG
542 help
543 This driver provides support for voltage regulators available
544 on the ARM Ltd's Versatile Express platform.
545
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]546config REGULATOR_WM831X
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]547 tristate "Wolfson Microelectronics WM831x PMIC regulators"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]548 depends on MFD_WM831X
549 help
550 Support the voltage and current regulators of the WM831x series
551 of PMIC devices.
552
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]553config REGULATOR_WM8350
554 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
555 depends on MFD_WM8350
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]556 help
557 This driver provides support for the voltage and current regulators
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]558 of the WM8350 AudioPlus PMIC.
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]559
560config REGULATOR_WM8400
561 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
562 depends on MFD_WM8400
563 help
564 This driver provides support for the voltage regulators of the
565 WM8400 AudioPlus PMIC.
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]566
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]567config REGULATOR_WM8994
568 tristate "Wolfson Microelectronics WM8994 CODEC"
569 depends on MFD_WM8994
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]570 help
571 This driver provides support for the voltage regulators on the
572 WM8994 CODEC.
573
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]574endif
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]575