Blame - drivers/regulator/Kconfig - kernel/msm-4.9

blob: 6c88e31c01f7b11797aeeab37d622b03d720cf16 [file] [log] [blame]

Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	1	menuconfig REGULATOR
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	2	bool "Voltage and Current Regulator Support"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	3	help
				4	Generic Voltage and Current Regulator support.
				5
				6	This framework is designed to provide a generic interface to voltage
				7	and current regulators within the Linux kernel. It's intended to
				8	provide voltage and current control to client or consumer drivers and
				9	also provide status information to user space applications through a
				10	sysfs interface.
				11
				12	The intention is to allow systems to dynamically control regulator
				13	output in order to save power and prolong battery life. This applies
				14	to both voltage regulators (where voltage output is controllable) and
				15	current sinks (where current output is controllable).
				16
				17	This framework safely compiles out if not selected so that client
				18	drivers can still be used in systems with no software controllable
				19	regulators.
				20
				21	If unsure, say no.
				22
Mark Brown	809d310	2012-06-20 11:08:43 +0100	[diff] [blame]	23
Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	24	if REGULATOR
				25
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	26	config REGULATOR_DEBUG
				27	bool "Regulator debug support"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	28	help
				29	Say yes here to enable debugging support.
				30
				31	config REGULATOR_FIXED_VOLTAGE
Mark Brown	a9cb63b	2009-01-19 13:37:05 +0000	[diff] [blame]	32	tristate "Fixed voltage regulator support"
Mark Brown	a9cb63b	2009-01-19 13:37:05 +0000	[diff] [blame]	33	help
				34	This driver provides support for fixed voltage regulators,
				35	useful for systems which use a combination of software
				36	managed regulators and simple non-configurable regulators.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	37
				38	config REGULATOR_VIRTUAL_CONSUMER
				39	tristate "Virtual regulator consumer support"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	40	help
				41	This driver provides a virtual consumer for the voltage and
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	42	current regulator API which provides sysfs controls for
				43	configuring the supplies requested. This is mainly useful
				44	for test purposes.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	45
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	46	If unsure, say no.
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	47
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	48	config REGULATOR_USERSPACE_CONSUMER
				49	tristate "Userspace regulator consumer support"
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	50	help
				51	There are some classes of devices that are controlled entirely
Michael Prokop	6f2653e	2009-09-05 02:59:14 +0200	[diff] [blame]	52	from user space. Userspace consumer driver provides ability to
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	53	control power supplies for such devices.
				54
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	55	If unsure, say no.
Mike Rapoport	1d98ccc	2009-04-26 16:49:39 +0300	[diff] [blame]	56
Chao Xie	95f1dc0	2013-07-17 23:07:03 -0400	[diff] [blame]	57	config REGULATOR_88PM800
				58	tristate "Marvell 88PM800 Power regulators"
Axel Lin	7c45f60	2013-07-19 09:17:53 +0800	[diff] [blame]	59	depends on MFD_88PM800
Chao Xie	95f1dc0	2013-07-17 23:07:03 -0400	[diff] [blame]	60	help
				61	This driver supports Marvell 88PM800 voltage regulator chips.
				62	It delivers digitally programmable output,
				63	the voltage is programmed via I2C interface.
				64	It's suitable to support PXA988 chips to control VCC_MAIN and
				65	various voltages.
				66
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	67	config REGULATOR_88PM8607
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	68	tristate "Marvell 88PM8607 Power regulators"
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	69	depends on MFD_88PM860X=y
Heiko Stübner	3f0292a	2011-10-05 12:27:05 +0200	[diff] [blame]	70	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	71	This driver supports 88PM8607 voltage regulator chips.
Heiko Stübner	3f0292a	2011-10-05 12:27:05 +0200	[diff] [blame]	72
Wenyou Yang	33036f4	2013-12-24 10:34:28 +0800	[diff] [blame]	73	config REGULATOR_ACT8865
				74	tristate "Active-semi act8865 voltage regulator"
				75	depends on I2C
				76	select REGMAP_I2C
				77	help
				78	This driver controls a active-semi act8865 voltage output
				79	regulator via I2C bus.
				80
Wenyou Yang	38c0996	2016-02-05 12:33:30 +0800	[diff] [blame]	81	config REGULATOR_ACT8945A
				82	tristate "Active-semi ACT8945A voltage regulator"
				83	depends on MFD_ACT8945A
				84	help
				85	This driver controls a active-semi ACT8945A voltage regulator
				86	via I2C bus. The ACT8945A features three step-down DC/DC converters
				87	and four low-dropout linear regulators, along with a ActivePath
				88	battery charger.
				89
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	90	config REGULATOR_AD5398
				91	tristate "Analog Devices AD5398/AD5821 regulators"
				92	depends on I2C
Philipp Zabel	0eb5d5a	2008-07-11 17:28:06 +0200	[diff] [blame]	93	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	94	This driver supports AD5398 and AD5821 current regulator chips.
				95	If building into module, its name is ad5398.ko.
				96
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	97	config REGULATOR_ANATOP
				98	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
				99	depends on MFD_SYSCON
				100	help
				101	Say y here to support Freescale i.MX on-chip ANATOP LDOs
				102	regulators. It is recommended that this option be
				103	enabled on i.MX6 platform.
				104
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	105	config REGULATOR_AAT2870
				106	tristate "AnalogicTech AAT2870 Regulators"
				107	depends on MFD_AAT2870_CORE
				108	help
				109	If you have a AnalogicTech AAT2870 say Y to enable the
				110	regulator driver.
				111
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	112	config REGULATOR_AB3100
				113	tristate "ST-Ericsson AB3100 Regulator functions"
				114	depends on AB3100_CORE
				115	default y if AB3100_CORE
				116	help
				117	These regulators correspond to functionality in the
				118	AB3100 analog baseband dealing with power regulators
				119	for the system.
				120
				121	config REGULATOR_AB8500
				122	bool "ST-Ericsson AB8500 Power Regulators"
				123	depends on AB8500_CORE
				124	help
				125	This driver supports the regulators found on the ST-Ericsson mixed
				126	signal AB8500 PMIC
				127
Mark Brown	b667a45	2012-06-14 18:14:00 +0100	[diff] [blame]	128	config REGULATOR_ARIZONA
				129	tristate "Wolfson Arizona class devices"
				130	depends on MFD_ARIZONA
Mark Brown	e6ed905	2013-01-10 19:14:11 +0000	[diff] [blame]	131	depends on SND_SOC
Mark Brown	b667a45	2012-06-14 18:14:00 +0100	[diff] [blame]	132	help
				133	Support for the regulators found on Wolfson Arizona class
				134	devices.
				135
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	136	config REGULATOR_AS3711
				137	tristate "AS3711 PMIC"
				138	depends on MFD_AS3711
				139	help
				140	This driver provides support for the voltage regulators on the
				141	AS3711 PMIC
				142
Laxman Dewangan	bc40733	2013-09-20 18:00:13 +0530	[diff] [blame]	143	config REGULATOR_AS3722
				144	tristate "AMS AS3722 PMIC Regulators"
				145	depends on MFD_AS3722
				146	help
				147	This driver provides support for the voltage regulators on the
				148	AS3722 PMIC. This will enable support for all the software
				149	controllable DCDC/LDO regulators.
				150
Carlo Caione	dfe7a1b	2014-04-11 11:38:10 +0200	[diff] [blame]	151	config REGULATOR_AXP20X
				152	tristate "X-POWERS AXP20X PMIC Regulators"
				153	depends on MFD_AXP20X
				154	help
				155	This driver provides support for the voltage regulators on the
				156	AXP20X PMIC.
				157
Matt Porter	462c9fc	2014-03-11 11:46:13 -0400	[diff] [blame]	158	config REGULATOR_BCM590XX
				159	tristate "Broadcom BCM590xx PMU Regulators"
				160	depends on MFD_BCM590XX
				161	help
				162	This driver provides support for the voltage regulators on the
				163	BCM590xx PMUs. This will enable support for the software
				164	controllable LDO/Switching regulators.
				165
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	166	config REGULATOR_DA903X
				167	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
				168	depends on PMIC_DA903X
				169	help
				170	Say y here to support the BUCKs and LDOs regulators found on
				171	Dialog Semiconductor DA9030/DA9034 PMIC.
				172
				173	config REGULATOR_DA9052
				174	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
				175	depends on PMIC_DA9052
				176	help
				177	This driver supports the voltage regulators of DA9052-BC and
				178	DA9053-AA/Bx PMIC.
				179
Ashish Jangam	f6130be	2012-11-01 13:57:56 +0530	[diff] [blame]	180	config REGULATOR_DA9055
				181	tristate "Dialog Semiconductor DA9055 regulators"
				182	depends on MFD_DA9055
				183	help
				184	Say y here to support the BUCKs and LDOs regulators found on
				185	Dialog Semiconductor DA9055 PMIC.
				186
				187	This driver can also be built as a module. If so, the module
				188	will be called da9055-regulator.
				189
S Twiss	4068e51	2015-05-19 14:10:30 +0100	[diff] [blame]	190	config REGULATOR_DA9062
				191	tristate "Dialog Semiconductor DA9062 regulators"
				192	depends on MFD_DA9062
				193	help
				194	Say y here to support the BUCKs and LDOs regulators found on
				195	DA9062 PMICs.
				196
				197	This driver can also be built as a module. If so, the module
				198	will be called da9062-regulator.
				199
Krystian Garbaciak	69ca3e5	2013-07-29 19:00:45 +0200	[diff] [blame]	200	config REGULATOR_DA9063
				201	tristate "Dialog Semiconductor DA9063 regulators"
				202	depends on MFD_DA9063
				203	help
				204	Say y here to support the BUCKs and LDOs regulators found on
				205	DA9063 PMICs.
				206
				207	This driver can also be built as a module. If so, the module
				208	will be called da9063-regulator.
				209
Steve Twiss	16f1091	2013-08-06 15:30:48 +0100	[diff] [blame]	210	config REGULATOR_DA9210
				211	tristate "Dialog Semiconductor DA9210 regulator"
				212	depends on I2C
				213	select REGMAP_I2C
				214	help
				215	Say y here to support for the Dialog Semiconductor DA9210.
				216	The DA9210 is a multi-phase synchronous step down
				217	converter 12A DC-DC Buck controlled through an I2C
				218	interface.
				219
James Ban	1028a37	2014-07-14 13:48:45 +0900	[diff] [blame]	220	config REGULATOR_DA9211
James Ban	7bd3935	2015-06-30 13:39:39 +0900	[diff] [blame]	221	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator"
James Ban	1028a37	2014-07-14 13:48:45 +0900	[diff] [blame]	222	depends on I2C
				223	select REGMAP_I2C
				224	help
James Ban	005547e	2014-08-08 14:27:04 +0900	[diff] [blame]	225	Say y here to support for the Dialog Semiconductor DA9211/DA9212
James Ban	7bd3935	2015-06-30 13:39:39 +0900	[diff] [blame]	226	/DA9213/DA9214/DA9215.
				227	The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
James Ban	005547e	2014-08-08 14:27:04 +0900	[diff] [blame]	228	step down converter 12A or 16A DC-DC Buck controlled through an I2C
James Ban	1028a37	2014-07-14 13:48:45 +0900	[diff] [blame]	229	interface.
				230
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	231	config REGULATOR_DBX500_PRCMU
				232	bool
				233
				234	config REGULATOR_DB8500_PRCMU
				235	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
				236	depends on MFD_DB8500_PRCMU
				237	select REGULATOR_DBX500_PRCMU
				238	help
				239	This driver supports the voltage domain regulators controlled by the
				240	DB8500 PRCMU
				241
Yunfan Zhang	49d8c59	2012-09-08 03:52:18 -0700	[diff] [blame]	242	config REGULATOR_FAN53555
				243	tristate "Fairchild FAN53555 Regulator"
				244	depends on I2C
				245	select REGMAP_I2C
				246	help
				247	This driver supports Fairchild FAN53555 Digitally Programmable
				248	TinyBuck Regulator. The FAN53555 is a step-down switching voltage
				249	regulator that delivers a digitally programmable output from an
				250	input voltage supply of 2.5V to 5.5V. The output voltage is
				251	programmed through an I2C interface.
				252
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	253	config REGULATOR_GPIO
				254	tristate "GPIO regulator support"
Geert Uytterhoeven	9eac5fd	2015-05-05 18:32:32 +0200	[diff] [blame]	255	depends on GPIOLIB \|\| COMPILE_TEST
Ying-Chun Liu (PaulLiu)	e3e5aff	2012-03-14 10:29:12 +0800	[diff] [blame]	256	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	257	This driver provides support for regulators that can be
				258	controlled via gpios.
				259	It is capable of supporting current and voltage regulators
				260	and the platform has to provide a mapping of GPIO-states
				261	to target volts/amps.
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	262
Guodong Xu	87ca186	2014-08-13 19:33:42 +0800	[diff] [blame]	263	config REGULATOR_HI6421
				264	tristate "HiSilicon Hi6421 PMIC voltage regulator support"
				265	depends on MFD_HI6421_PMIC && OF
				266	help
				267	This driver provides support for the voltage regulators on the
				268	HiSilicon Hi6421 PMU / Codec IC.
				269	Hi6421 is a multi-function device which, on regulator part, provides
				270	21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
				271	of them come with support to either ECO (idle) or sleep mode.
				272
Chen Feng	4618119	2016-02-14 14:29:22 +0800	[diff] [blame]	273	config REGULATOR_HI655X
				274	tristate "Hisilicon HI655X PMIC regulators support"
				275	depends on ARCH_HISI \|\| COMPILE_TEST
				276	depends on MFD_HI655X_PMIC && OF
				277	help
				278	This driver provides support for the voltage regulators of the
				279	Hisilicon Hi655x PMIC device.
				280
Mark Brown	dec38b5	2014-09-06 01:11:12 +0100	[diff] [blame]	281	config REGULATOR_ISL9305
				282	tristate "Intersil ISL9305 regulator"
				283	depends on I2C
Axel Lin	ba441ec	2014-09-10 08:44:36 +0800	[diff] [blame]	284	select REGMAP_I2C
Mark Brown	dec38b5	2014-09-06 01:11:12 +0100	[diff] [blame]	285	help
				286	This driver supports ISL9305 voltage regulator chip.
				287
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	288	config REGULATOR_ISL6271A
				289	tristate "Intersil ISL6271A Power regulator"
				290	depends on I2C
				291	help
				292	This driver supports ISL6271A voltage regulator chip.
				293
Milo Kim	3a8d1a7	2015-11-26 15:57:05 +0900	[diff] [blame]	294	config REGULATOR_LM363X
				295	tristate "TI LM363X voltage regulators"
				296	depends on MFD_TI_LMU
				297	help
				298	This driver supports LM3631 and LM3632 voltage regulators for
				299	the LCD bias.
				300	One boost output voltage is configurable and always on.
				301	Other LDOs are used for the display module.
				302
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	303	config REGULATOR_LP3971
				304	tristate "National Semiconductors LP3971 PMIC regulator driver"
				305	depends on I2C
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	306	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	307	Say Y here to support the voltage regulators and convertors
				308	on National Semiconductors LP3971 PMIC
				309
				310	config REGULATOR_LP3972
				311	tristate "National Semiconductors LP3972 PMIC regulator driver"
				312	depends on I2C
				313	help
				314	Say Y here to support the voltage regulators and convertors
				315	on National Semiconductors LP3972 PMIC
				316
				317	config REGULATOR_LP872X
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	318	tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
Axel Lin	613965f	2013-08-30 22:13:44 +0800	[diff] [blame]	319	depends on I2C
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	320	select REGMAP_I2C
				321	help
				322	This driver supports LP8720/LP8725 PMIC
				323
Keerthy	994aae3	2016-05-10 09:34:39 +0530	[diff] [blame]	324	config REGULATOR_LP873X
				325	tristate "TI LP873X Power regulators"
				326	depends on MFD_LP873X && OF
				327	help
				328	This driver supports LP873X voltage regulator chips. LP873X
				329	provides two step-down converters and two general-purpose LDO
				330	voltage regulators. It supports software based voltage control
				331	for different voltage domains
				332
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	333	config REGULATOR_LP8755
				334	tristate "TI LP8755 High Performance PMU driver"
				335	depends on I2C
				336	select REGMAP_I2C
				337	help
				338	This driver supports LP8755 High Performance PMU driver. This
				339	chip contains six step-down DC/DC converters which can support
				340	9 mode multiphase configuration.
				341
				342	config REGULATOR_LP8788
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	343	tristate "TI LP8788 Power Regulators"
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	344	depends on MFD_LP8788
				345	help
				346	This driver supports LP8788 voltage regulator chip.
Philipp Zabel	0eb5d5a	2008-07-11 17:28:06 +0200	[diff] [blame]	347
Philipp Zabel	3eb2c7e	2014-05-26 10:38:16 +0200	[diff] [blame]	348	config REGULATOR_LTC3589
Axel Lin	ac1d686	2014-05-27 13:51:49 +0800	[diff] [blame]	349	tristate "LTC3589 8-output voltage regulator"
				350	depends on I2C
				351	select REGMAP_I2C
Philipp Zabel	3eb2c7e	2014-05-26 10:38:16 +0200	[diff] [blame]	352	help
				353	This enables support for the LTC3589, LTC3589-1, and LTC3589-2
				354	8-output regulators controlled via I2C.
				355
Krzysztof Kozlowski	b0902bb	2013-12-06 12:32:13 +0100	[diff] [blame]	356	config REGULATOR_MAX14577
Krzysztof Kozlowski	8a82b40	2014-04-14 11:17:20 +0200	[diff] [blame]	357	tristate "Maxim 14577/77836 regulator"
Krzysztof Kozlowski	b0902bb	2013-12-06 12:32:13 +0100	[diff] [blame]	358	depends on MFD_MAX14577
				359	help
Krzysztof Kozlowski	8a82b40	2014-04-14 11:17:20 +0200	[diff] [blame]	360	This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
				361	The MAX14577 regulators include safeout LDO and charger current
				362	regulator. The MAX77836 has two additional LDOs.
Krzysztof Kozlowski	b0902bb	2013-12-06 12:32:13 +0100	[diff] [blame]	363
Robert Jarzmik	55f4fa4	2009-04-23 20:10:43 +0200	[diff] [blame]	364	config REGULATOR_MAX1586
				365	tristate "Maxim 1586/1587 voltage regulator"
				366	depends on I2C
Robert Jarzmik	55f4fa4	2009-04-23 20:10:43 +0200	[diff] [blame]	367	help
				368	This driver controls a Maxim 1586 or 1587 voltage output
				369	regulator via I2C bus. The provided regulator is suitable
				370	for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
				371
Laxman Dewangan	5b1c202	2016-02-11 17:26:34 +0530	[diff] [blame]	372	config REGULATOR_MAX77620
				373	tristate "Maxim 77620/MAX20024 voltage regulator"
				374	depends on MFD_MAX77620
				375	help
				376	This driver controls Maxim MAX77620 voltage output regulator
				377	via I2C bus. The provided regulator is suitable for Tegra
				378	chip to control Step-Down DC-DC and LDOs. Say Y here to
				379	enable the regulator driver.
				380
Haojian Zhuang	a71b797	2010-01-25 10:24:09 -0500	[diff] [blame]	381	config REGULATOR_MAX8649
				382	tristate "Maxim 8649 voltage regulator"
				383	depends on I2C
Jonghwan Choi	c5b68d47	2011-10-24 22:26:26 +0900	[diff] [blame]	384	select REGMAP_I2C
Haojian Zhuang	a71b797	2010-01-25 10:24:09 -0500	[diff] [blame]	385	help
				386	This driver controls a Maxim 8649 voltage output regulator via
				387	I2C bus.
				388
Wolfram Sang	27f37e4	2009-09-25 09:39:26 +0200	[diff] [blame]	389	config REGULATOR_MAX8660
				390	tristate "Maxim 8660/8661 voltage regulator"
				391	depends on I2C
				392	help
				393	This driver controls a Maxim 8660/8661 voltage output
				394	regulator via I2C bus.
				395
Gyungoh Yoo	ffee190	2012-08-09 14:24:34 -0600	[diff] [blame]	396	config REGULATOR_MAX8907
				397	tristate "Maxim 8907 voltage regulator"
				398	depends on MFD_MAX8907
				399	help
				400	This driver controls a Maxim 8907 voltage output regulator
				401	via I2C bus. The provided regulator is suitable for Tegra
				402	chip to control Step-Down DC-DC and LDOs.
				403
Haojian Zhuang	08ff6f2	2010-01-11 13:10:08 +0100	[diff] [blame]	404	config REGULATOR_MAX8925
				405	tristate "Maxim MAX8925 Power Management IC"
				406	depends on MFD_MAX8925
				407	help
				408	Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
				409
MyungJoo Ham	202f4f5	2010-08-20 14:43:56 +0900	[diff] [blame]	410	config REGULATOR_MAX8952
				411	tristate "Maxim MAX8952 Power Management IC"
				412	depends on I2C
				413	help
				414	This driver controls a Maxim 8952 voltage output regulator
				415	via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
				416	modes ranging from 0.77V to 1.40V by 0.01V steps.
				417
Laxman Dewangan	5928f53	2012-11-19 06:58:29 +0530	[diff] [blame]	418	config REGULATOR_MAX8973
				419	tristate "Maxim MAX8973 voltage regulator "
				420	depends on I2C
Laxman Dewangan	d2d5437b	2016-04-13 15:29:45 +0530	[diff] [blame]	421	depends on THERMAL && THERMAL_OF
Laxman Dewangan	5928f53	2012-11-19 06:58:29 +0530	[diff] [blame]	422	select REGMAP_I2C
				423	help
				424	The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
				425	switching regulator delievers up to 9A of output current. Each
				426	phase operates at a 2MHz fixed frequency with a 120 deg shift
				427	from the adjacent phase, allowing the use of small magnetic component.
				428
MyungJoo Ham	bd6ca2c	2011-03-11 11:34:44 +0900	[diff] [blame]	429	config REGULATOR_MAX8997
				430	tristate "Maxim 8997/8966 regulator"
				431	depends on MFD_MAX8997
				432	help
				433	This driver controls a Maxim 8997/8966 regulator
				434	via I2C bus. The provided regulator is suitable for S5PC110,
				435	S5PV210, and Exynos-4 chips to control VCC_CORE and
				436	VCC_USIM voltages.
				437
Kyungmin Park	156f252	2010-06-16 09:04:16 +0200	[diff] [blame]	438	config REGULATOR_MAX8998
				439	tristate "Maxim 8998 voltage regulator"
Marek Szyprowski	69f7100	2010-06-21 10:04:23 +0200	[diff] [blame]	440	depends on MFD_MAX8998
Kyungmin Park	156f252	2010-06-16 09:04:16 +0200	[diff] [blame]	441	help
				442	This driver controls a Maxim 8998 voltage output regulator
				443	via I2C bus. The provided regulator is suitable for S3C6410
				444	and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
				445
Jonghwa Lee	133d401	2012-06-01 13:17:14 +0900	[diff] [blame]	446	config REGULATOR_MAX77686
				447	tristate "Maxim 77686 regulator"
				448	depends on MFD_MAX77686
				449	help
				450	This driver controls a Maxim 77686 regulator
				451	via I2C bus. The provided regulator is suitable for
				452	Exynos-4 chips to control VARM and VINT voltages.
				453
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	454	config REGULATOR_MAX77693
Krzysztof Kozlowski	9e9a08e	2015-07-15 21:59:54 +0900	[diff] [blame]	455	tristate "Maxim 77693/77843 regulator"
				456	depends on (MFD_MAX77693 \|\| MFD_MAX77843)
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	457	help
Krzysztof Kozlowski	9e9a08e	2015-07-15 21:59:54 +0900	[diff] [blame]	458	This driver controls a Maxim 77693/77843 regulators via I2C bus.
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	459	The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
				460	and one current regulator 'CHARGER'. This is suitable for
Krzysztof Kozlowski	9e9a08e	2015-07-15 21:59:54 +0900	[diff] [blame]	461	Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
Jonghwa Lee	80b022e	2013-06-25 10:08:38 +0900	[diff] [blame]	462
Javier Martinez Canillas	e6f2f80	2014-08-18 10:32:41 +0200	[diff] [blame]	463	config REGULATOR_MAX77802
				464	tristate "Maxim 77802 regulator"
				465	depends on MFD_MAX77686
				466	help
				467	This driver controls a Maxim 77802 regulator
				468	via I2C bus. The provided regulator is suitable for
				469	Exynos5420/Exynos5800 SoCs to control various voltages.
				470	It includes support for control of voltage and ramp speed.
				471
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	472	config REGULATOR_MC13XXX_CORE
				473	tristate
				474
				475	config REGULATOR_MC13783
				476	tristate "Freescale MC13783 regulator driver"
Alexander Shiyan	e5a3da2	2013-12-14 17:03:10 +0400	[diff] [blame]	477	depends on MFD_MC13XXX
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	478	select REGULATOR_MC13XXX_CORE
				479	help
				480	Say y here to support the regulators found on the Freescale MC13783
				481	PMIC.
				482
				483	config REGULATOR_MC13892
				484	tristate "Freescale MC13892 regulator driver"
				485	depends on MFD_MC13XXX
				486	select REGULATOR_MC13XXX_CORE
				487	help
				488	Say y here to support the regulators found on the Freescale MC13892
				489	PMIC.
				490
Henry Chen	8766018	2015-07-24 13:24:41 +0800	[diff] [blame]	491	config REGULATOR_MT6311
				492	tristate "MediaTek MT6311 PMIC"
				493	depends on I2C
Henry Chen	aab3c3f	2015-11-17 16:36:49 +0800	[diff] [blame]	494	select REGMAP_I2C
Henry Chen	8766018	2015-07-24 13:24:41 +0800	[diff] [blame]	495	help
				496	Say y here to select this option to enable the power regulator of
				497	MediaTek MT6311 PMIC.
				498	This driver supports the control of different power rails of device
				499	through regulator interface.
				500
Chen Zhong	2fdf829	2016-07-18 14:40:51 +0200	[diff] [blame]	501	config REGULATOR_MT6323
				502	tristate "MediaTek MT6323 PMIC"
				503	depends on MFD_MT6397
				504	help
				505	Say y here to select this option to enable the power regulator of
				506	MediaTek MT6323 PMIC.
				507	This driver supports the control of different power rails of device
				508	through regulator interface.
				509
Flora Fu	0425e24	2014-12-05 12:07:54 +0800	[diff] [blame]	510	config REGULATOR_MT6397
				511	tristate "MediaTek MT6397 PMIC"
				512	depends on MFD_MT6397
				513	help
				514	Say y here to select this option to enable the power regulator of
				515	MediaTek MT6397 PMIC.
				516	This driver supports the control of different power rails of device
				517	through regulator interface.
				518
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	519	config REGULATOR_PALMAS
				520	tristate "TI Palmas PMIC Regulators"
				521	depends on MFD_PALMAS
				522	help
				523	If you wish to control the regulators on the Palmas series of
				524	chips say Y here. This will enable support for all the software
				525	controllable SMPS/LDO regulators.
				526
				527	The regulators available on Palmas series chips vary depending
				528	on the muxing. This is handled automatically in the driver by
				529	reading the mux info from OTP.
				530
Balaji T K	11469e0	2014-02-19 20:26:40 +0530	[diff] [blame]	531	config REGULATOR_PBIAS
				532	tristate "PBIAS OMAP regulator driver"
				533	depends on (ARCH_OMAP \|\| COMPILE_TEST) && MFD_SYSCON
				534	help
				535	Say y here to support pbias regulator for mmc1:SD card i/o
				536	on OMAP SoCs.
				537	This driver provides support for OMAP pbias modelled
				538	regulators.
				539
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	540	config REGULATOR_PCAP
				541	tristate "Motorola PCAP2 regulator driver"
				542	depends on EZX_PCAP
Sangbeom Kim	62aa492	2012-01-13 10:13:13 +0900	[diff] [blame]	543	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	544	This driver provides support for the voltage regulators of the
				545	PCAP2 PMIC.
Balaji Rao	5ec271e	2009-01-09 01:51:01 +0100	[diff] [blame]	546
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	547	config REGULATOR_PCF50633
				548	tristate "NXP PCF50633 regulator driver"
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	549	depends on MFD_PCF50633
Daniel Ribeiro	39b1772	2009-06-27 00:18:02 -0300	[diff] [blame]	550	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	551	Say Y here to support the voltage regulators and convertors
				552	on PCF50633
Daniel Ribeiro	39b1772	2009-06-27 00:18:02 -0300	[diff] [blame]	553
Robin Gong	3784b6d	2013-07-25 11:33:18 +0800	[diff] [blame]	554	config REGULATOR_PFUZE100
Fabio Estevam	af2c55c	2016-06-05 19:17:39 -0300	[diff] [blame]	555	tristate "Freescale PFUZE100/200/3000 regulator driver"
Robin Gong	3784b6d	2013-07-25 11:33:18 +0800	[diff] [blame]	556	depends on I2C
Axel Lin	94421b0	2013-07-29 12:08:01 +0800	[diff] [blame]	557	select REGMAP_I2C
Robin Gong	3784b6d	2013-07-25 11:33:18 +0800	[diff] [blame]	558	help
Axel Lin	2cee212	2014-03-05 18:02:43 +0800	[diff] [blame]	559	Say y here to support the regulators found on the Freescale
Fabio Estevam	af2c55c	2016-06-05 19:17:39 -0300	[diff] [blame]	560	PFUZE100/200/3000 PMIC.
Robin Gong	3784b6d	2013-07-25 11:33:18 +0800	[diff] [blame]	561
James Ban	f307a7e	2015-11-19 09:59:15 +0900	[diff] [blame]	562	config REGULATOR_PV88060
				563	tristate "Powerventure Semiconductor PV88060 regulator"
				564	depends on I2C
				565	select REGMAP_I2C
				566	help
				567	Say y here to support the voltage regulators and convertors
				568	PV88060
				569
James Ban	99cf3af	2016-04-15 13:34:22 +0900	[diff] [blame]	570	config REGULATOR_PV88080
				571	tristate "Powerventure Semiconductor PV88080 regulator"
				572	depends on I2C
				573	select REGMAP_I2C
				574	help
				575	Say y here to support the buck convertors on PV88080
				576
James Ban	c90456e	2015-12-08 10:57:29 +0900	[diff] [blame]	577	config REGULATOR_PV88090
				578	tristate "Powerventure Semiconductor PV88090 regulator"
				579	depends on I2C
				580	select REGMAP_I2C
				581	help
				582	Say y here to support the voltage regulators and convertors
				583	on PV88090
				584
Chris Zhong	aa66cc6	2014-09-28 10:28:53 +0800	[diff] [blame]	585	config REGULATOR_PWM
				586	tristate "PWM voltage regulator"
				587	depends on PWM
				588	help
				589	This driver supports PWM controlled voltage regulators. PWM
				590	duty cycle can increase or decrease the voltage.
				591
Bjorn Andersson	2720386	2014-09-22 16:25:29 -0700	[diff] [blame]	592	config REGULATOR_QCOM_RPM
				593	tristate "Qualcomm RPM regulator driver"
				594	depends on MFD_QCOM_RPM
				595	help
				596	If you say yes to this option, support will be included for the
				597	regulators exposed by the Resource Power Manager found in Qualcomm
				598	8660, 8960 and 8064 based devices.
				599
				600	Say M here if you want to include support for the regulators on the
				601	Qualcomm RPM as a module. The module will be named
				602	"qcom_rpm-regulator".
				603
Bjorn Andersson	da65e36	2015-08-17 11:43:59 -0700	[diff] [blame]	604	config REGULATOR_QCOM_SMD_RPM
				605	tristate "Qualcomm SMD based RPM regulator driver"
				606	depends on QCOM_SMD_RPM
				607	help
				608	If you say yes to this option, support will be included for the
				609	regulators exposed by the Resource Power Manager found in Qualcomm
				610	8974 based devices.
				611
				612	Say M here if you want to include support for the regulators on the
				613	Qualcomm RPM as a module. The module will be named
				614	"qcom_smd-regulator".
				615
Stephen Boyd	e92a404	2015-06-12 15:47:10 -0700	[diff] [blame]	616	config REGULATOR_QCOM_SPMI
				617	tristate "Qualcomm SPMI regulator driver"
				618	depends on SPMI \|\| COMPILE_TEST
				619	help
				620	If you say yes to this option, support will be included for the
				621	regulators found in Qualcomm SPMI PMICs.
				622
				623	Say M here if you want to include support for the regulators on the
				624	Qualcomm SPMI PMICs as a module. The module will be named
				625	"qcom_spmi-regulator".
				626
Laxman Dewangan	6ffc327	2012-04-04 12:44:00 +0530	[diff] [blame]	627	config REGULATOR_RC5T583
				628	tristate "RICOH RC5T583 Power regulators"
				629	depends on MFD_RC5T583
				630	help
				631	Select this option to enable the power regulator of RICOH
				632	PMIC RC5T583.
				633	This driver supports the control of different power rails of device
				634	through regulator interface. The device supports multiple DCDC/LDO
				635	outputs which can be controlled by i2c communication.
				636
Chris Zhong	2cd64ae	2014-08-20 11:36:42 +0800	[diff] [blame]	637	config REGULATOR_RK808
				638	tristate "Rockchip RK808 Power regulators"
				639	depends on MFD_RK808
				640	help
				641	Select this option to enable the power regulator of ROCKCHIP
				642	PMIC RK808.
				643	This driver supports the control of different power rails of device
				644	through regulator interface. The device supports multiple DCDC/LDO
				645	outputs which can be controlled by i2c communication.
				646
Beniamino Galvani	811b700	2014-08-30 14:50:24 +0200	[diff] [blame]	647	config REGULATOR_RN5T618
Stefan Agner	ed6d362	2016-06-28 22:53:20 -0700	[diff] [blame]	648	tristate "Ricoh RN5T567/618 voltage regulators"
Beniamino Galvani	811b700	2014-08-30 14:50:24 +0200	[diff] [blame]	649	depends on MFD_RN5T618
				650	help
Stefan Agner	ed6d362	2016-06-28 22:53:20 -0700	[diff] [blame]	651	Say y here to support the regulators found on Ricoh RN5T567 or
				652	RN5T618 PMIC.
Beniamino Galvani	811b700	2014-08-30 14:50:24 +0200	[diff] [blame]	653
Beomho Seo	b191757	2014-11-12 21:07:59 +0900	[diff] [blame]	654	config REGULATOR_RT5033
				655	tristate "Richtek RT5033 Regulators"
				656	depends on MFD_RT5033
				657	help
				658	This adds support for voltage and current regulators in Richtek
				659	RT5033 PMIC. The device supports multiple regulators like
				660	current source, LDO and Buck.
				661
Sachin Kamat	f187927	2014-03-14 17:21:58 +0530	[diff] [blame]	662	config REGULATOR_S2MPA01
				663	tristate "Samsung S2MPA01 voltage regulator"
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	664	depends on MFD_SEC_CORE
				665	help
Sachin Kamat	f187927	2014-03-14 17:21:58 +0530	[diff] [blame]	666	This driver controls Samsung S2MPA01 voltage output regulator
				667	via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
				668
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	669	config REGULATOR_S2MPS11
Thomas Abraham	51af206	2015-11-20 16:07:52 +0530	[diff] [blame]	670	tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	671	depends on MFD_SEC_CORE
				672	help
Thomas Abraham	51af206	2015-11-20 16:07:52 +0530	[diff] [blame]	673	This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
Chanwoo Choi	76b9840	2014-11-18 17:59:40 +0900	[diff] [blame]	674	output regulator via I2C bus. The chip is comprised of high efficient
				675	Buck converters including Dual-Phase Buck converter, Buck-Boost
				676	converter, various LDOs.
Sangbeom Kim	cb74685	2012-07-11 21:08:17 +0900	[diff] [blame]	677
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	678	config REGULATOR_S5M8767
				679	tristate "Samsung S5M8767A voltage regulator"
Sangbeom Kim	66c9fbb	2012-07-11 21:06:40 +0900	[diff] [blame]	680	depends on MFD_SEC_CORE
Sascha Hauer	295c08b	2009-08-19 01:43:50 +0200	[diff] [blame]	681	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	682	This driver supports a Samsung S5M8767A voltage output regulator
				683	via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
				684	supports DVS mode with 8bits of output voltage control.
Yong Shen	5e428d5	2010-12-14 14:00:55 +0800	[diff] [blame]	685
Gyungoh Yoo	9839d62	2014-08-08 18:10:22 +0900	[diff] [blame]	686	config REGULATOR_SKY81452
				687	tristate "Skyworks Solutions SKY81452 voltage regulator"
Gyungoh Yoo	70b5b27	2014-11-17 17:33:10 +0900	[diff] [blame]	688	depends on MFD_SKY81452
Lee Jones	4a5d301	2014-03-21 10:21:36 +0000	[diff] [blame]	689	help
Gyungoh Yoo	9839d62	2014-08-08 18:10:22 +0900	[diff] [blame]	690	This driver supports Skyworks SKY81452 voltage output regulator
				691	via I2C bus. SKY81452 has one voltage linear regulator can be
				692	programmed from 4.5V to 20V.
				693
				694	This driver can also be built as a module. If so, the module
				695	will be called sky81452-regulator.
Lee Jones	4a5d301	2014-03-21 10:21:36 +0000	[diff] [blame]	696
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	697	config REGULATOR_TI_ABB
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	698	tristate "TI Adaptive Body Bias on-chip LDO"
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	699	depends on ARCH_OMAP
Linus Walleij	d619bc1	2009-09-09 11:31:00 +0200	[diff] [blame]	700	help
Mark Brown	82b736d	2013-07-05 20:45:22 +0100	[diff] [blame]	701	Select this option to support Texas Instruments' on-chip Adaptive Body
				702	Bias (ABB) LDO regulators. It is recommended that this option be
				703	enabled on required TI SoC. Certain Operating Performance Points
				704	on TI SoCs may be unstable without enabling this as it provides
				705	device specific optimized bias to allow/optimize functionality.
Graeme Gregory	4c5dabc	2012-05-15 15:48:59 +0900	[diff] [blame]	706
Linus Walleij	3615a34	2013-09-13 21:01:15 +0200	[diff] [blame]	707	config REGULATOR_STW481X_VMMC
				708	bool "ST Microelectronics STW481X VMMC regulator"
Luis de Bethencourt	4049dc1	2015-10-12 17:27:08 +0100	[diff] [blame]	709	depends on MFD_STW481X \|\| COMPILE_TEST
Linus Walleij	3615a34	2013-09-13 21:01:15 +0200	[diff] [blame]	710	default y if MFD_STW481X
				711	help
				712	This driver supports the internal VMMC regulator in the STw481x
				713	PMIC chips.
				714
Laxman Dewangan	0c57067	2012-10-06 20:47:46 +0530	[diff] [blame]	715	config REGULATOR_TPS51632
				716	tristate "TI TPS51632 Power Regulator"
				717	depends on I2C
				718	select REGMAP_I2C
				719	help
				720	This driver supports TPS51632 voltage regulator chip.
Axel Lin	7bde767	2012-11-01 14:02:36 +0800	[diff] [blame]	721	The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
Laxman Dewangan	0c57067	2012-10-06 20:47:46 +0530	[diff] [blame]	722	with Serial VID control and DVFS.
				723	The voltage output can be configure through I2C interface or PWM
				724	interface.
				725
Linus Walleij	2edd3b6	2011-03-09 12:02:55 +0000	[diff] [blame]	726	config REGULATOR_TPS6105X
				727	tristate "TI TPS6105X Power regulators"
				728	depends on TPS6105X
				729	default y if TPS6105X
				730	help
				731	This driver supports TPS61050/TPS61052 voltage regulator chips.
				732	It is a single boost converter primarily for white LEDs and
				733	audio amplifiers.
				734
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	735	config REGULATOR_TPS62360
Axel Lin	d1cf4f6	2012-04-02 18:19:28 +0800	[diff] [blame]	736	tristate "TI TPS6236x Power Regulator"
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	737	depends on I2C
				738	select REGMAP_I2C
				739	help
Axel Lin	d1cf4f6	2012-04-02 18:19:28 +0800	[diff] [blame]	740	This driver supports TPS6236x voltage regulator chip. This
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	741	regulator is meant for processor core supply. This chip is
				742	high-frequency synchronous step down dc-dc converter optimized
				743	for battery-powered portable applications.
				744
Anuj Aggarwal	2de7985	2009-08-21 00:39:44 +0530	[diff] [blame]	745	config REGULATOR_TPS65023
				746	tristate "TI TPS65023 Power regulators"
				747	depends on I2C
Mark Brown	9092335	2011-06-18 01:18:51 +0100	[diff] [blame]	748	select REGMAP_I2C
Anuj Aggarwal	2de7985	2009-08-21 00:39:44 +0530	[diff] [blame]	749	help
				750	This driver supports TPS65023 voltage regulator chips. TPS65023 provides
				751	three step-down converters and two general-purpose LDO voltage regulators.
				752	It supports TI's software based Class-2 SmartReflex implementation.
				753
				754	config REGULATOR_TPS6507X
				755	tristate "TI TPS6507X Power regulators"
				756	depends on I2C
				757	help
				758	This driver supports TPS6507X voltage regulator chips. TPS6507X provides
				759	three step-down converters and two general-purpose LDO voltage regulators.
				760	It supports TI's software based Class-2 SmartReflex implementation.
				761
Andrew F. Davis	d2a2e72	2015-11-04 11:12:14 -0600	[diff] [blame]	762	config REGULATOR_TPS65086
				763	tristate "TI TPS65086 Power regulators"
				764	depends on MFD_TPS65086
				765	help
				766	This driver provides support for the voltage regulators on
				767	TI TPS65086 PMICs.
				768
Venu Byravarasu	452534e	2012-03-22 18:34:09 +0530	[diff] [blame]	769	config REGULATOR_TPS65090
				770	tristate "TI TPS65090 Power regulator"
				771	depends on MFD_TPS65090
				772	help
				773	This driver provides support for the voltage regulators on the
				774	TI TPS65090 PMIC.
				775
AnilKumar Ch	a493077	2012-01-11 16:11:49 +0530	[diff] [blame]	776	config REGULATOR_TPS65217
				777	tristate "TI TPS65217 Power regulators"
				778	depends on MFD_TPS65217
				779	help
				780	This driver supports TPS65217 voltage regulator chips. TPS65217
				781	provides three step-down converters and four general-purpose LDO
				782	voltage regulators. It supports software based voltage control
				783	for different voltage domains
				784
Keerthy	90e7d52	2014-02-06 11:20:13 +0530	[diff] [blame]	785	config REGULATOR_TPS65218
				786	tristate "TI TPS65218 Power regulators"
Axel Lin	948838a	2014-02-19 16:35:03 +0800	[diff] [blame]	787	depends on MFD_TPS65218 && OF
Keerthy	90e7d52	2014-02-06 11:20:13 +0530	[diff] [blame]	788	help
				789	This driver supports TPS65218 voltage regulator chips. TPS65218
				790	provides six step-down converters and one general-purpose LDO
				791	voltage regulators. It supports software based voltage control
				792	for different voltage domains
				793
Cyril Chemparathy	1394fd2	2010-12-07 12:04:11 -0500	[diff] [blame]	794	config REGULATOR_TPS6524X
				795	tristate "TI TPS6524X Power regulators"
				796	depends on SPI
				797	help
				798	This driver supports TPS6524X voltage regulator chips. TPS6524X
				799	provides three step-down converters and two general-purpose LDO
				800	voltage regulators. This device is interfaced using a customized
				801	serial interface currently supported on the sequencer serial
				802	port controller.
				803
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	804	config REGULATOR_TPS6586X
				805	tristate "TI TPS6586X Power regulators"
				806	depends on MFD_TPS6586X
				807	help
				808	This driver supports TPS6586X voltage regulator chips.
				809
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	810	config REGULATOR_TPS65910
Axel Lin	ae0e654	2012-02-21 10:14:55 +0800	[diff] [blame]	811	tristate "TI TPS65910/TPS65911 Power Regulators"
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	812	depends on MFD_TPS65910
				813	help
Axel Lin	ae0e654	2012-02-21 10:14:55 +0800	[diff] [blame]	814	This driver supports TPS65910/TPS65911 voltage regulator chips.
Graeme Gregory	518fb72	2011-05-02 16:20:08 -0500	[diff] [blame]	815
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	816	config REGULATOR_TPS65912
				817	tristate "TI TPS65912 Power regulator"
Andrew F. Davis	33f9d8c	2016-01-25 09:43:46 -0600	[diff] [blame]	818	depends on MFD_TPS65912
Laxman Dewangan	6219929	2012-01-09 20:27:41 +0530	[diff] [blame]	819	help
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	820	This driver supports TPS65912 voltage regulator chip.
Laxman Dewangan	6219929	2012-01-09 20:27:41 +0530	[diff] [blame]	821
Laxman Dewangan	1a0bb67	2012-11-11 20:42:01 +0530	[diff] [blame]	822	config REGULATOR_TPS80031
				823	tristate "TI TPS80031/TPS80032 power regualtor driver"
				824	depends on MFD_TPS80031
				825	help
				826	TPS80031/ TPS80032 Fully Integrated Power Management with Power
				827	Path and Battery Charger. It has 5 configurable step-down
				828	converters, 11 general purpose LDOs, VBUS generator and digital
				829	output to control regulators.
				830
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	831	config REGULATOR_TWL4030
Mark Brown	631a1fc	2013-07-29 16:49:46 +0100	[diff] [blame]	832	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	833	depends on TWL4030_CORE
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	834	help
				835	This driver supports the voltage regulators provided by
				836	this family of companion chips.
				837
Pawel Moll	31e5408	2012-09-24 18:56:54 +0100	[diff] [blame]	838	config REGULATOR_VEXPRESS
				839	tristate "Versatile Express regulators"
				840	depends on VEXPRESS_CONFIG
				841	help
				842	This driver provides support for voltage regulators available
				843	on the ARM Ltd's Versatile Express platform.
				844
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	845	config REGULATOR_WM831X
Axel Lin	dfb9b8a	2012-02-22 09:29:16 +0800	[diff] [blame]	846	tristate "Wolfson Microelectronics WM831x PMIC regulators"
Liam Girdwood	ba7e476	2008-04-30 17:13:42 +0100	[diff] [blame]	847	depends on MFD_WM831X
				848	help
				849	Support the voltage and current regulators of the WM831x series
				850	of PMIC devices.
				851
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	852	config REGULATOR_WM8350
				853	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
				854	depends on MFD_WM8350
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	855	help
				856	This driver provides support for the voltage and current regulators
Michael Jones	c6d678b	2012-07-26 16:07:23 +0200	[diff] [blame]	857	of the WM8350 AudioPlus PMIC.
Mark Brown	42fad57	2008-09-11 11:12:01 +0100	[diff] [blame]	858
				859	config REGULATOR_WM8400
				860	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
				861	depends on MFD_WM8400
				862	help
				863	This driver provides support for the voltage regulators of the
				864	WM8400 AudioPlus PMIC.
Mark Brown	da09155	2008-10-10 15:58:15 +0100	[diff] [blame]	865
Eric Miao	129eef9	2008-08-27 04:16:08 +0800	[diff] [blame]	866	config REGULATOR_WM8994
				867	tristate "Wolfson Microelectronics WM8994 CODEC"
				868	depends on MFD_WM8994
Eric Miao	129eef9	2008-08-27 04:16:08 +0800	[diff] [blame]	869	help
				870	This driver provides support for the voltage regulators on the
				871	WM8994 CODEC.
				872
Takashi Iwai	bbda14d	2008-10-30 15:57:05 +0100	[diff] [blame]	873	endif
Sascha Hauer	295c08b	2009-08-19 01:43:50 +0200	[diff] [blame]	874