Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / a442baad4b9225a9794c794b3bb586e25d4a7187 / . / arch / arm64 / boot / dts / qcom / sdm845-v2.dtsi
blob: 0ef6bfaa1096ffc63904925207c66a3b5314becb [file] [log] [blame]
Channagoud Kadabi459f0112017-03-20 12:42:15 -0700[diff] [blame]1/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
2 *
3 * This program is free software; you can redistribute it and/or modify
4 * it under the terms of the GNU General Public License version 2 and
5 * only version 2 as published by the Free Software Foundation.
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 */
12
13#include "sdm845.dtsi"
14
15/ {
16 model = "Qualcomm Technologies, Inc. SDM845 V2";
17 qcom,msm-id = <321 0x20000>;
18};
David Collins36050182017-04-26 11:41:22 -0700[diff] [blame]19
Subhash Jadavani0842b272017-07-19 17:05:13 -0700[diff] [blame]20&sdhc_2 {
21 qcom,bus-bw-vectors-bps = <0 400000 20000000 25000000 50000000
22 100000000 200000000 4294967295>;
23 qcom,clk-rates = <400000 20000000 25000000 50000000
24 100000000 200000000>;
25 qcom,devfreq,freq-table = <50000000 200000000>;
Subhash Jadavani3497a962017-07-31 13:57:47 -0700[diff] [blame]26 /delete-property/ qcom,sdr104-wa;
Subhash Jadavani0842b272017-07-19 17:05:13 -0700[diff] [blame]27};
28
David Collinsf5764762017-07-20 16:42:42 -0700[diff] [blame]29/delete-node/ &apc0_cpr;
30/delete-node/ &apc1_cpr;
31
32&soc {
33 /* CPR controller regulators */
34 apc0_cpr: cprh-ctrl@17dc0000 {
35 compatible = "qcom,cprh-sdm845-v2-kbss-regulator";
36 reg = <0x17dc0000 0x4000>,
37 <0x00784000 0x1000>,
38 <0x17840000 0x1000>;
39 reg-names = "cpr_ctrl", "fuse_base", "saw";
40 clocks = <&clock_gcc GCC_CPUSS_RBCPR_CLK>;
41 clock-names = "core_clk";
42 qcom,cpr-ctrl-name = "apc0";
43 qcom,cpr-controller-id = <0>;
44
45 qcom,cpr-sensor-time = <1000>;
46 qcom,cpr-loop-time = <5000000>;
47 qcom,cpr-idle-cycles = <15>;
48 qcom,cpr-up-down-delay-time = <3000>;
49 qcom,cpr-step-quot-init-min = <11>;
50 qcom,cpr-step-quot-init-max = <12>;
51 qcom,cpr-count-mode = <0>; /* All at once */
52 qcom,cpr-count-repeat = <20>;
53 qcom,cpr-down-error-step-limit = <1>;
54 qcom,cpr-up-error-step-limit = <1>;
55 qcom,cpr-corner-switch-delay-time = <1042>;
56 qcom,cpr-voltage-settling-time = <1760>;
57 qcom,cpr-reset-step-quot-loop-en;
58
59 qcom,voltage-step = <4000>;
60 qcom,voltage-base = <352000>;
61 qcom,cpr-saw-use-unit-mV;
62
63 qcom,saw-avs-ctrl = <0x101C031>;
64 qcom,saw-avs-limit = <0x3B803B8>;
65
66 qcom,cpr-enable;
67 qcom,cpr-hw-closed-loop;
68
69 qcom,cpr-panic-reg-addr-list =
70 <0x17dc3a84 0x17dc3a88 0x17840c18>;
71 qcom,cpr-panic-reg-name-list =
72 "APSS_SILVER_CPRH_STATUS_0",
73 "APSS_SILVER_CPRH_STATUS_1",
74 "SILVER_SAW4_PMIC_STS";
75
76 qcom,cpr-aging-ref-voltage = <952000>;
77 vdd-supply = <&pm8998_s13>;
78
79 thread@0 {
80 qcom,cpr-thread-id = <0>;
81 qcom,cpr-consecutive-up = <0>;
82 qcom,cpr-consecutive-down = <0>;
83 qcom,cpr-up-threshold = <2>;
84 qcom,cpr-down-threshold = <2>;
85
86 apc0_pwrcl_vreg: regulator {
87 regulator-name = "apc0_pwrcl_corner";
88 regulator-min-microvolt = <1>;
89 regulator-max-microvolt = <18>;
90
91 qcom,cpr-fuse-corners = <4>;
92 qcom,cpr-fuse-combos = <16>;
93 qcom,cpr-speed-bins = <2>;
94 qcom,cpr-speed-bin-corners = <18 18>;
95 qcom,cpr-corners = <18>;
96
97 qcom,cpr-corner-fmax-map = <6 12 15 18>;
98
99 qcom,cpr-voltage-ceiling =
100 <828000 828000 828000 828000 828000
101 828000 828000 828000 828000 828000
102 828000 828000 828000 828000 828000
103 884000 952000 952000>;
104
105 qcom,cpr-voltage-floor =
106 <568000 568000 568000 568000 568000
107 568000 568000 568000 568000 568000
108 568000 568000 568000 568000 568000
109 568000 568000 568000>;
110
111 qcom,cpr-floor-to-ceiling-max-range =
112 <32000 32000 32000 32000 32000
113 32000 32000 32000 32000 32000
114 32000 32000 32000 32000 32000
115 32000 40000 40000>;
116
117 qcom,corner-frequencies =
118 <300000000 403200000 480000000
119 576000000 652800000 748800000
120 825600000 902400000 979200000
121 1056000000 1132800000 1228800000
122 1324800000 1420800000 1516800000
123 1612800000 1689600000 1766400000>;
124
125 qcom,cpr-ro-scaling-factor =
126 <2594 2795 2576 2761 2469 2673 2198
127 2553 3188 3255 3191 2962 3055 2984
128 2043 2947>,
129 <2594 2795 2576 2761 2469 2673 2198
130 2553 3188 3255 3191 2962 3055 2984
131 2043 2947>,
132 <2259 2389 2387 2531 2294 2464 2218
133 2476 2525 2855 2817 2836 2740 2490
134 1950 2632>,
135 <2259 2389 2387 2531 2294 2464 2218
136 2476 2525 2855 2817 2836 2740 2490
137 1950 2632>;
138
139 qcom,cpr-open-loop-voltage-fuse-adjustment =
140 <100000 100000 100000 100000>;
141
142 qcom,cpr-closed-loop-voltage-fuse-adjustment =
143 <100000 100000 100000 100000>;
144
145 qcom,allow-voltage-interpolation;
146 qcom,allow-quotient-interpolation;
147 qcom,cpr-scaled-open-loop-voltage-as-ceiling;
148
149 qcom,cpr-aging-max-voltage-adjustment = <15000>;
150 qcom,cpr-aging-ref-corner = <18>;
151 qcom,cpr-aging-ro-scaling-factor = <1620>;
152 qcom,allow-aging-voltage-adjustment =
153 /* Speed bin 0 */
154 <0 1 1 1 1 1 1 1>,
155 /* Speed bin 1 */
156 <0 1 1 1 1 1 1 1>;
157 qcom,allow-aging-open-loop-voltage-adjustment =
158 <1>;
159 };
160 };
161
162 thread@1 {
163 qcom,cpr-thread-id = <1>;
164 qcom,cpr-consecutive-up = <0>;
165 qcom,cpr-consecutive-down = <0>;
166 qcom,cpr-up-threshold = <2>;
167 qcom,cpr-down-threshold = <2>;
168
169 apc0_l3_vreg: regulator {
170 regulator-name = "apc0_l3_corner";
171 regulator-min-microvolt = <1>;
172 regulator-max-microvolt = <14>;
173
174 qcom,cpr-fuse-corners = <4>;
175 qcom,cpr-fuse-combos = <16>;
176 qcom,cpr-speed-bins = <2>;
177 qcom,cpr-speed-bin-corners = <14 14>;
178 qcom,cpr-corners = <14>;
179
180 qcom,cpr-corner-fmax-map = <4 8 11 14>;
181
182 qcom,cpr-voltage-ceiling =
183 <828000 828000 828000 828000 828000
184 828000 828000 828000 828000 828000
185 828000 884000 884000 952000>;
186
187 qcom,cpr-voltage-floor =
188 <568000 568000 568000 568000 568000
189 568000 568000 568000 568000 568000
190 568000 568000 568000 568000>;
191
192 qcom,cpr-floor-to-ceiling-max-range =
193 <32000 32000 32000 32000 32000
194 32000 32000 32000 32000 32000
195 32000 32000 32000 40000>;
196
197 qcom,corner-frequencies =
198 <300000000 403200000 480000000
199 576000000 652800000 748800000
200 844800000 940800000 1036800000
201 1132800000 1209600000 1305600000
202 1401600000 1478400000>;
203
204 qcom,cpr-ro-scaling-factor =
205 <2857 3056 2828 2952 2699 2796 2447
206 2631 2630 2579 2244 3343 3287 3137
207 3164 2656>,
208 <2857 3056 2828 2952 2699 2796 2447
209 2631 2630 2579 2244 3343 3287 3137
210 3164 2656>,
211 <2439 2577 2552 2667 2461 2577 2394
212 2536 2132 2307 2191 2903 2838 2912
213 2501 2095>,
214 <2439 2577 2552 2667 2461 2577 2394
215 2536 2132 2307 2191 2903 2838 2912
216 2501 2095>;
217
218 qcom,cpr-open-loop-voltage-fuse-adjustment =
219 <100000 100000 100000 100000>;
220
221 qcom,cpr-closed-loop-voltage-fuse-adjustment =
222 <100000 100000 100000 100000>;
223
224 qcom,allow-voltage-interpolation;
225 qcom,allow-quotient-interpolation;
226 qcom,cpr-scaled-open-loop-voltage-as-ceiling;
227
228 qcom,cpr-aging-max-voltage-adjustment = <15000>;
229 qcom,cpr-aging-ref-corner = <14>;
230 qcom,cpr-aging-ro-scaling-factor = <1620>;
231 qcom,allow-aging-voltage-adjustment =
232 /* Speed bin 0 */
233 <0 1 1 1 1 1 1 1>,
234 /* Speed bin 1 */
235 <0 1 1 1 1 1 1 1>;
236 qcom,allow-aging-open-loop-voltage-adjustment =
237 <1>;
238 };
239 };
240 };
241
242 apc1_cpr: cprh-ctrl@17db0000 {
243 compatible = "qcom,cprh-sdm845-v2-kbss-regulator";
244 reg = <0x17db0000 0x4000>,
245 <0x00784000 0x1000>,
246 <0x17830000 0x1000>;
247 reg-names = "cpr_ctrl", "fuse_base", "saw";
248 clocks = <&clock_gcc GCC_CPUSS_RBCPR_CLK>;
249 clock-names = "core_clk";
250 qcom,cpr-ctrl-name = "apc1";
251 qcom,cpr-controller-id = <1>;
252
253 qcom,cpr-sensor-time = <1000>;
254 qcom,cpr-loop-time = <5000000>;
255 qcom,cpr-idle-cycles = <15>;
256 qcom,cpr-up-down-delay-time = <3000>;
257 qcom,cpr-step-quot-init-min = <9>;
258 qcom,cpr-step-quot-init-max = <14>;
259 qcom,cpr-count-mode = <0>; /* All at once */
260 qcom,cpr-count-repeat = <20>;
261 qcom,cpr-down-error-step-limit = <1>;
262 qcom,cpr-up-error-step-limit = <1>;
263 qcom,cpr-corner-switch-delay-time = <1042>;
264 qcom,cpr-voltage-settling-time = <1760>;
265 qcom,cpr-reset-step-quot-loop-en;
266
267 qcom,apm-threshold-voltage = <800000>;
268 qcom,apm-crossover-voltage = <880000>;
269 qcom,mem-acc-threshold-voltage = <852000>;
270 qcom,mem-acc-crossover-voltage = <852000>;
271
272 qcom,voltage-step = <4000>;
273 qcom,voltage-base = <352000>;
274 qcom,cpr-saw-use-unit-mV;
275
276 qcom,saw-avs-ctrl = <0x101C031>;
277 qcom,saw-avs-limit = <0x4700470>;
278
279 qcom,cpr-enable;
280 qcom,cpr-hw-closed-loop;
281
282 qcom,cpr-panic-reg-addr-list =
283 <0x17db3a84 0x17830c18>;
284 qcom,cpr-panic-reg-name-list =
285 "APSS_GOLD_CPRH_STATUS_0", "GOLD_SAW4_PMIC_STS";
286
287 qcom,cpr-aging-ref-voltage = <1136000>;
288 vdd-supply = <&pm8998_s12>;
289
290 thread@0 {
291 qcom,cpr-thread-id = <0>;
292 qcom,cpr-consecutive-up = <0>;
293 qcom,cpr-consecutive-down = <0>;
294 qcom,cpr-up-threshold = <2>;
295 qcom,cpr-down-threshold = <2>;
296
297 apc1_perfcl_vreg: regulator {
298 regulator-name = "apc1_perfcl_corner";
299 regulator-min-microvolt = <1>;
300 regulator-max-microvolt = <33>;
301
302 qcom,cpr-fuse-corners = <5>;
303 qcom,cpr-fuse-combos = <16>;
304 qcom,cpr-speed-bins = <2>;
305 qcom,cpr-speed-bin-corners = <28 31>;
306 qcom,cpr-corners =
307 /* Speed bin 0 */
308 <28 28 28 28 28 28 28 28>,
309 /* Speed bin 1 */
310 <31 31 31 31 31 31 31 31>;
311
312 qcom,cpr-corner-fmax-map =
313 /* Speed bin 0 */
314 <7 14 22 27 28>,
315 /* Speed bin 1 */
316 <7 14 22 27 31>;
317
318 qcom,cpr-voltage-ceiling =
319 /* Speed bin 0 */
320 <828000 828000 828000 828000 828000
321 828000 828000 828000 828000 828000
322 828000 828000 828000 828000 828000
323 828000 828000 828000 884000 884000
324 884000 884000 1104000 1104000 1104000
325 1104000 1136000 1136000>,
326 /* Speed bin 1 */
327 <828000 828000 828000 828000 828000
328 828000 828000 828000 828000 828000
329 828000 828000 828000 828000 828000
330 828000 828000 828000 884000 884000
331 884000 884000 1104000 1104000 1104000
332 1104000 1136000 1136000 1136000 1136000
333 1136000>;
334
335 qcom,cpr-voltage-floor =
336 /* Speed bin 0 */
337 <568000 568000 568000 568000 568000
338 568000 568000 568000 568000 568000
339 568000 568000 568000 568000 568000
340 568000 568000 568000 568000 568000
341 568000 568000 568000 568000 568000
342 568000 568000 568000>,
343 /* Speed bin 1 */
344 <568000 568000 568000 568000 568000
345 568000 568000 568000 568000 568000
346 568000 568000 568000 568000 568000
347 568000 568000 568000 568000 568000
348 568000 568000 568000 568000 568000
349 568000 568000 568000 568000 568000
350 568000>;
351
352 qcom,cpr-floor-to-ceiling-max-range =
353 /* Speed bin 0 */
354 <32000 32000 32000 32000 32000
355 32000 32000 32000 32000 32000
356 32000 32000 32000 32000 32000
357 32000 32000 32000 32000 32000
358 32000 32000 32000 32000 32000
359 32000 32000 32000>,
360 /* Speed bin 1 */
361 <32000 32000 32000 32000 32000
362 32000 32000 32000 32000 32000
363 32000 32000 32000 32000 32000
364 32000 32000 32000 32000 32000
365 32000 32000 32000 32000 32000
366 32000 32000 40000 40000 40000
367 40000>;
368
369 qcom,corner-frequencies =
370 /* Speed bin 0 */
371 <300000000 403200000 480000000
372 576000000 652800000 748800000
373 825600000 902400000 979200000
374 1056000000 1132800000 1209600000
375 1286400000 1363200000 1459200000
376 1536000000 1612800000 1689600000
377 1766400000 1843200000 1920000000
378 1996800000 2092800000 2169600000
379 2246400000 2323200000 2400000000
380 2400000000>,
381 /* Speed bin 1 */
382 <300000000 403200000 480000000
383 576000000 652800000 748800000
384 825600000 902400000 979200000
385 1056000000 1132800000 1209600000
386 1286400000 1363200000 1459200000
387 1536000000 1612800000 1689600000
388 1766400000 1843200000 1920000000
389 1996800000 2092800000 2169600000
390 2246400000 2323200000 2400000000
391 2476800000 2553600000 2630400000
392 2707200000>;
393
394 qcom,cpr-ro-scaling-factor =
395 <2857 3056 2828 2952 2699 2796 2447
396 2631 2630 2579 2244 3343 3287 3137
397 3164 2656>,
398 <2857 3056 2828 2952 2699 2796 2447
399 2631 2630 2579 2244 3343 3287 3137
400 3164 2656>,
401 <2086 2208 2273 2408 2203 2327 2213
402 2340 1755 2039 2049 2474 2437 2618
403 2003 1675>,
404 <2086 2208 2273 2408 2203 2327 2213
405 2340 1755 2039 2049 2474 2437 2618
406 2003 1675>,
407 <2086 2208 2273 2408 2203 2327 2213
408 2340 1755 2039 2049 2474 2437 2618
409 2003 1675>;
410
411 qcom,cpr-open-loop-voltage-fuse-adjustment =
412 <100000 100000 100000 100000 100000>;
413
414 qcom,cpr-closed-loop-voltage-fuse-adjustment =
415 <100000 100000 100000 100000 100000>;
416
417 qcom,allow-voltage-interpolation;
418 qcom,allow-quotient-interpolation;
419 qcom,cpr-scaled-open-loop-voltage-as-ceiling;
420
421 qcom,cpr-aging-max-voltage-adjustment = <15000>;
422 qcom,cpr-aging-ref-corner = <27 31>;
423 qcom,cpr-aging-ro-scaling-factor = <1700>;
424 qcom,allow-aging-voltage-adjustment =
425 /* Speed bin 0 */
426 <0 1 1 1 1 1 1 1>,
427 /* Speed bin 1 */
428 <0 1 1 1 1 1 1 1>;
429 qcom,allow-aging-open-loop-voltage-adjustment =
430 <1>;
431 };
432 };
433 };
434};
435
436&clock_cpucc {
Deepak Katragaddaa442baa2017-07-11 12:27:06 -0700[diff] [blame^]437 compatible = "qcom,clk-cpu-osm-v2";
438
David Collinsf5764762017-07-20 16:42:42 -0700[diff] [blame]439 vdd-l3-supply = <&apc0_l3_vreg>;
440 vdd-pwrcl-supply = <&apc0_pwrcl_vreg>;
Deepak Katragaddaa442baa2017-07-11 12:27:06 -0700[diff] [blame^]441 vdd-perfcl-supply = <&apc1_perfcl_vreg>;
442
443 qcom,l3-speedbin0-v0 =
444 < 300000000 0x000c000f 0x00002020 0x1 1 >,
445 < 403200000 0x500c0115 0x00002020 0x1 2 >,
446 < 480000000 0x50140219 0x00002020 0x1 3 >,
447 < 576000000 0x5014031e 0x00002020 0x1 4 >,
448 < 652800000 0x401c0422 0x00002020 0x1 5 >,
449 < 748800000 0x401c0527 0x00002020 0x1 6 >,
450 < 844800000 0x4024062c 0x00002323 0x2 7 >,
451 < 940800000 0x40240731 0x00002727 0x2 8 >,
452 < 1036800000 0x40240836 0x00002b2b 0x2 9 >,
453 < 1132800000 0x402c093b 0x00002f2f 0x2 10 >,
454 < 1209600000 0x402c0a3f 0x00003232 0x2 11 >,
455 < 1305600000 0x40340b44 0x00003636 0x2 12 >,
456 < 1401600000 0x40340c49 0x00003a3a 0x2 13 >,
457 < 1478400000 0x403c0d4d 0x00003e3e 0x2 14 >;
458
459 qcom,pwrcl-speedbin0-v0 =
460 < 300000000 0x000c000f 0x00002020 0x1 1 >,
461 < 403200000 0x500c0115 0x00002020 0x1 2 >,
462 < 480000000 0x50140219 0x00002020 0x1 3 >,
463 < 576000000 0x5014031e 0x00002020 0x1 4 >,
464 < 652800000 0x401c0422 0x00002020 0x1 5 >,
465 < 748800000 0x401c0527 0x00002020 0x1 6 >,
466 < 825600000 0x401c062b 0x00002222 0x1 7 >,
467 < 902400000 0x4024072f 0x00002626 0x1 8 >,
468 < 979200000 0x40240833 0x00002929 0x1 9 >,
469 < 1056000000 0x402c0937 0x00002c2c 0x2 10 >,
470 < 1132800000 0x402c0a3b 0x00002f2f 0x2 11 >,
471 < 1228800000 0x402c0b40 0x00003333 0x2 12 >,
472 < 1324800000 0x40340c45 0x00003737 0x2 13 >,
473 < 1420800000 0x40340d4a 0x00003b3b 0x2 14 >,
474 < 1516800000 0x403c0e4f 0x00003f3f 0x2 15 >,
475 < 1612800000 0x403c0f54 0x00004343 0x2 16 >,
476 < 1689600000 0x40441058 0x00004646 0x2 17 >,
477 < 1766400000 0x4044115c 0x00004a4a 0x2 18 >;
478
479 qcom,perfcl-speedbin0-v0 =
480 < 300000000 0x000c000f 0x00002020 0x1 1 >,
481 < 403200000 0x500c0115 0x00002020 0x1 2 >,
482 < 480000000 0x50140219 0x00002020 0x1 3 >,
483 < 576000000 0x5014031e 0x00002020 0x1 4 >,
484 < 652800000 0x401c0422 0x00002020 0x1 5 >,
485 < 748800000 0x401c0527 0x00002020 0x1 6 >,
486 < 825600000 0x401c062b 0x00002222 0x1 7 >,
487 < 902400000 0x4024072f 0x00002626 0x1 8 >,
488 < 979200000 0x40240833 0x00002929 0x1 9 >,
489 < 1056000000 0x402c0937 0x00002c2c 0x1 10 >,
490 < 1132800000 0x402c0a3b 0x00002f2f 0x1 11 >,
491 < 1209600000 0x402c0b3f 0x00003232 0x2 12 >,
492 < 1286400000 0x40340c43 0x00003636 0x2 13 >,
493 < 1363200000 0x40340d47 0x00003939 0x2 14 >,
494 < 1459200000 0x403c0e4c 0x00003d3d 0x2 15 >,
495 < 1536000000 0x403c0f50 0x00004040 0x2 16 >,
496 < 1612800000 0x403c1054 0x00004343 0x2 17 >,
497 < 1689600000 0x40441158 0x00004646 0x2 18 >,
498 < 1766400000 0x4044125c 0x00004a4a 0x2 19 >,
499 < 1843200000 0x40441360 0x00004d4d 0x2 20 >,
500 < 1920000000 0x404c1464 0x00005050 0x2 21 >,
501 < 1996800000 0x404c1568 0x00005353 0x2 22 >,
502 < 2092800000 0x4054166d 0x00005757 0x2 23 >,
503 < 2169600000 0x40541771 0x00005a5a 0x2 24 >,
504 < 2246400000 0x40541875 0x00005e5e 0x2 25 >,
505 < 2323200000 0x40541979 0x00006161 0x2 26 >,
506 < 2400000000 0x40541a7d 0x00006464 0x2 27 >;
507
508 qcom,perfcl-speedbin1-v0 =
509 < 300000000 0x000c000f 0x00002020 0x1 1 >,
510 < 403200000 0x500c0115 0x00002020 0x1 2 >,
511 < 480000000 0x50140219 0x00002020 0x1 3 >,
512 < 576000000 0x5014031e 0x00002020 0x1 4 >,
513 < 652800000 0x401c0422 0x00002020 0x1 5 >,
514 < 748800000 0x401c0527 0x00002020 0x1 6 >,
515 < 825600000 0x401c062b 0x00002222 0x1 7 >,
516 < 902400000 0x4024072f 0x00002626 0x1 8 >,
517 < 979200000 0x40240833 0x00002929 0x1 9 >,
518 < 1056000000 0x402c0937 0x00002c2c 0x1 10 >,
519 < 1132800000 0x402c0a3b 0x00002f2f 0x1 11 >,
520 < 1209600000 0x402c0b3f 0x00003232 0x2 12 >,
521 < 1286400000 0x40340c43 0x00003636 0x2 13 >,
522 < 1363200000 0x40340d47 0x00003939 0x2 14 >,
523 < 1459200000 0x403c0e4c 0x00003d3d 0x2 15 >,
524 < 1536000000 0x403c0f50 0x00004040 0x2 16 >,
525 < 1612800000 0x403c1054 0x00004343 0x2 17 >,
526 < 1689600000 0x40441158 0x00004646 0x2 18 >,
527 < 1766400000 0x4044125c 0x00004a4a 0x2 19 >,
528 < 1843200000 0x40441360 0x00004d4d 0x2 20 >,
529 < 1920000000 0x404c1464 0x00005050 0x2 21 >,
530 < 1996800000 0x404c1568 0x00005353 0x2 22 >,
531 < 2092800000 0x4054166d 0x00005757 0x2 23 >,
532 < 2169600000 0x40541771 0x00005a5a 0x2 24 >,
533 < 2246400000 0x40541875 0x00005e5e 0x2 25 >,
534 < 2323200000 0x40541979 0x00006161 0x2 26 >,
535 < 2400000000 0x40541a7d 0x00006464 0x2 27 >,
536 < 2476800000 0x40541b81 0x00006767 0x2 28 >,
537 < 2553600000 0x40541c85 0x00006a6a 0x2 29 >,
538 < 2630400000 0x40541d89 0x00006e6e 0x2 30 >,
539 < 2707200000 0x40541e8d 0x00007171 0x2 31 >;
David Collinsf5764762017-07-20 16:42:42 -0700[diff] [blame]540};
541
Deepak Katragaddada47ee92017-06-07 14:15:09 -0700[diff] [blame]542&clock_gcc {
543 compatible = "qcom,gcc-sdm845-v2";
544};
545
546&clock_camcc {
547 compatible = "qcom,cam_cc-sdm845-v2";
548};
549
550&clock_dispcc {
551 compatible = "qcom,dispcc-sdm845-v2";
552};
553
554&clock_videocc {
555 compatible = "qcom,video_cc-sdm845-v2";
556};
Praneeth Paladugu55381212017-07-05 15:02:44 -0700[diff] [blame]557
558&msm_vidc {
559 qcom,allowed-clock-rates = <100000000 200000000 330000000
560 404000000 444000000 533000000>;
561};
Reut Zysman861fd6c2017-07-30 15:39:13 +0300[diff] [blame]562
563&spss_utils {
564 qcom,spss-dev-firmware-name = "spss2d"; /* 8 chars max */
565 qcom,spss-test-firmware-name = "spss2t"; /* 8 chars max */
566 qcom,spss-prod-firmware-name = "spss2p"; /* 8 chars max */
567};