blob: 6e16244f3ed1f4d27c6d5c6baa1c0a1042cfe00c [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Video configuration
3#
4
5menu "Graphics support"
Martin Schwidefskye25df122007-05-10 15:45:57 +02006 depends on HAS_IOMEM
Linus Torvalds1da177e2005-04-16 15:20:36 -07007
Nicolas Ferre0912e532009-06-23 16:30:56 +02008config HAVE_FB_ATMEL
9 bool
10
Randy Dunlap179b0252007-10-16 01:29:39 -070011source "drivers/char/agp/Kconfig"
12
Benjamin Herrenschmidtdeb2d2e2009-08-11 15:52:06 +100013source "drivers/gpu/vga/Kconfig"
14
Dave Airliec0e09202008-05-29 10:09:59 +100015source "drivers/gpu/drm/Kconfig"
Antonino A. Daplasba707102006-06-26 00:26:37 -070016
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -070017config VGASTATE
18 tristate
19 default n
20
Luming Yu23b0f012007-05-09 21:07:05 +080021config VIDEO_OUTPUT_CONTROL
22 tristate "Lowlevel video output switch controls"
Luming Yu23b0f012007-05-09 21:07:05 +080023 help
24 This framework adds support for low-level control of the video
25 output switch.
26
Randy Dunlap179b0252007-10-16 01:29:39 -070027menuconfig FB
Linus Torvalds1da177e2005-04-16 15:20:36 -070028 tristate "Support for frame buffer devices"
29 ---help---
30 The frame buffer device provides an abstraction for the graphics
31 hardware. It represents the frame buffer of some video hardware and
32 allows application software to access the graphics hardware through
33 a well-defined interface, so the software doesn't need to know
34 anything about the low-level (hardware register) stuff.
35
36 Frame buffer devices work identically across the different
37 architectures supported by Linux and make the implementation of
38 application programs easier and more portable; at this point, an X
39 server exists which uses the frame buffer device exclusively.
40 On several non-X86 architectures, the frame buffer device is the
41 only way to use the graphics hardware.
42
43 The device is accessed through special device nodes, usually located
44 in the /dev directory, i.e. /dev/fb*.
45
46 You need an utility program called fbset to make full use of frame
47 buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
48 and the Framebuffer-HOWTO at
Alex Buell248ae0d2009-01-29 14:25:16 -080049 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more
Linus Torvalds1da177e2005-04-16 15:20:36 -070050 information.
51
52 Say Y here and to the driver for your graphics board below if you
53 are compiling a kernel for a non-x86 architecture.
54
55 If you are compiling for the x86 architecture, you can say Y if you
56 want to play with it, but it is not essential. Please note that
57 running graphical applications that directly touch the hardware
58 (e.g. an accelerated X server) and that are not frame buffer
59 device-aware may cause unexpected results. If unsure, say N.
60
James Simmonse0e34ef2007-02-10 14:15:43 +000061config FIRMWARE_EDID
62 bool "Enable firmware EDID"
63 depends on FB
64 default n
65 ---help---
66 This enables access to the EDID transferred from the firmware.
67 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
68 transfers do not work for your driver and if you are using
69 nvidiafb, i810fb or savagefb.
70
71 In general, choosing Y for this option is safe. If you
72 experience extremely long delays while booting before you get
73 something on your display, try setting this to N. Matrox cards in
74 combination with certain motherboards and monitors are known to
75 suffer from this problem.
76
Dennis Munsiefc5891c2006-10-03 01:14:42 -070077config FB_DDC
78 tristate
James Simmonse0e34ef2007-02-10 14:15:43 +000079 depends on FB
80 select I2C_ALGOBIT
81 select I2C
Dennis Munsiefc5891c2006-10-03 01:14:42 -070082 default n
83
Michal Januszewski4d31a2b2008-10-15 22:03:51 -070084config FB_BOOT_VESA_SUPPORT
85 bool
86 depends on FB
87 default n
88 ---help---
89 If true, at least one selected framebuffer driver can take advantage
90 of VESA video modes set at an early boot stage via the vga= parameter.
91
Linus Torvalds1da177e2005-04-16 15:20:36 -070092config FB_CFB_FILLRECT
93 tristate
94 depends on FB
95 default n
96 ---help---
97 Include the cfb_fillrect function for generic software rectangle
98 filling. This is used by drivers that don't provide their own
99 (accelerated) version.
100
101config FB_CFB_COPYAREA
102 tristate
103 depends on FB
104 default n
105 ---help---
106 Include the cfb_copyarea function for generic software area copying.
107 This is used by drivers that don't provide their own (accelerated)
108 version.
109
110config FB_CFB_IMAGEBLIT
111 tristate
112 depends on FB
113 default n
114 ---help---
115 Include the cfb_imageblit function for generic software image
116 blitting. This is used by drivers that don't provide their own
117 (accelerated) version.
118
Pavel Pisa779121e2007-10-16 01:29:21 -0700119config FB_CFB_REV_PIXELS_IN_BYTE
120 bool
121 depends on FB
122 default n
123 ---help---
124 Allow generic frame-buffer functions to work on displays with 1, 2
125 and 4 bits per pixel depths which has opposite order of pixels in
126 byte order to bytes in long order.
127
Antonino A. Daplas68648ed2007-05-08 00:38:57 -0700128config FB_SYS_FILLRECT
129 tristate
130 depends on FB
131 default n
132 ---help---
133 Include the sys_fillrect function for generic software rectangle
134 filling. This is used by drivers that don't provide their own
135 (accelerated) version and the framebuffer is in system RAM.
136
137config FB_SYS_COPYAREA
138 tristate
139 depends on FB
140 default n
141 ---help---
142 Include the sys_copyarea function for generic software area copying.
143 This is used by drivers that don't provide their own (accelerated)
144 version and the framebuffer is in system RAM.
145
146config FB_SYS_IMAGEBLIT
147 tristate
148 depends on FB
149 default n
150 ---help---
151 Include the sys_imageblit function for generic software image
152 blitting. This is used by drivers that don't provide their own
153 (accelerated) version and the framebuffer is in system RAM.
154
Anton Vorontsove4c690e2008-04-28 02:14:49 -0700155menuconfig FB_FOREIGN_ENDIAN
156 bool "Framebuffer foreign endianness support"
157 depends on FB
158 ---help---
159 This menu will let you enable support for the framebuffers with
160 non-native endianness (e.g. Little-Endian framebuffer on a
161 Big-Endian machine). Most probably you don't have such hardware,
162 so it's safe to say "n" here.
163
164choice
165 prompt "Choice endianness support"
166 depends on FB_FOREIGN_ENDIAN
167
168config FB_BOTH_ENDIAN
169 bool "Support for Big- and Little-Endian framebuffers"
170
171config FB_BIG_ENDIAN
172 bool "Support for Big-Endian framebuffers only"
173
174config FB_LITTLE_ENDIAN
175 bool "Support for Little-Endian framebuffers only"
176
177endchoice
178
Antonino A. Daplas09aaf262007-05-08 00:39:03 -0700179config FB_SYS_FOPS
180 tristate
181 depends on FB
182 default n
183
Jaya Kumar60b59be2007-05-08 00:37:37 -0700184config FB_DEFERRED_IO
185 bool
186 depends on FB
Jaya Kumar60b59be2007-05-08 00:37:37 -0700187
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700188config FB_HECUBA
189 tristate
190 depends on FB
191 depends on FB_DEFERRED_IO
192
Ondrej Zajiceka2684222007-02-12 00:54:49 -0800193config FB_SVGALIB
194 tristate
195 depends on FB
196 default n
197 ---help---
198 Common utility functions useful to fbdev drivers of VGA-based
199 cards.
200
Linus Torvalds1da177e2005-04-16 15:20:36 -0700201config FB_MACMODES
202 tristate
203 depends on FB
204 default n
205
Michael Hanselmann5474c122006-06-25 05:47:08 -0700206config FB_BACKLIGHT
Michael Hanselmann4b755992006-07-30 03:04:19 -0700207 bool
208 depends on FB
209 select BACKLIGHT_LCD_SUPPORT
210 select BACKLIGHT_CLASS_DEVICE
211 default n
Michael Hanselmann5474c122006-06-25 05:47:08 -0700212
Linus Torvalds1da177e2005-04-16 15:20:36 -0700213config FB_MODE_HELPERS
214 bool "Enable Video Mode Handling Helpers"
215 depends on FB
216 default n
217 ---help---
218 This enables functions for handling video modes using the
219 Generalized Timing Formula and the EDID parser. A few drivers rely
220 on this feature such as the radeonfb, rivafb, and the i810fb. If
221 your driver does not take advantage of this feature, choosing Y will
222 just increase the kernel size by about 5K.
223
224config FB_TILEBLITTING
225 bool "Enable Tile Blitting Support"
226 depends on FB
227 default n
228 ---help---
229 This enables tile blitting. Tile blitting is a drawing technique
230 where the screen is divided into rectangular sections (tiles), whereas
231 the standard blitting divides the screen into pixels. Because the
232 default drawing element is a tile, drawing functions will be passed
233 parameters in terms of number of tiles instead of number of pixels.
234 For example, to draw a single character, instead of using bitmaps,
235 an index to an array of bitmaps will be used. To clear or move a
236 rectangular section of a screen, the rectangle will be described in
237 terms of number of tiles in the x- and y-axis.
238
239 This is particularly important to one driver, matroxfb. If
240 unsure, say N.
241
Miguel Ojeda10ccaf42007-04-23 14:41:09 -0700242comment "Frame buffer hardware drivers"
James Simmonse0e34ef2007-02-10 14:15:43 +0000243 depends on FB
244
Linus Torvalds1da177e2005-04-16 15:20:36 -0700245config FB_CIRRUS
246 tristate "Cirrus Logic support"
247 depends on FB && (ZORRO || PCI)
248 select FB_CFB_FILLRECT
249 select FB_CFB_COPYAREA
250 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700251 ---help---
252 This enables support for Cirrus Logic GD542x/543x based boards on
253 Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
254
255 If you have a PCI-based system, this enables support for these
256 chips: GD-543x, GD-544x, GD-5480.
257
258 Please read the file <file:Documentation/fb/cirrusfb.txt>.
259
260 Say N unless you have such a graphics board or plan to get one
261 before you next recompile the kernel.
262
263config FB_PM2
264 tristate "Permedia2 support"
265 depends on FB && ((AMIGA && BROKEN) || PCI)
266 select FB_CFB_FILLRECT
267 select FB_CFB_COPYAREA
268 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700269 help
Krzysztof Helt4edad7f2008-10-15 22:03:32 -0700270 This is the frame buffer device driver for cards based on
271 the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
272 The driver was tested on the following cards:
273 Diamond FireGL 1000 PRO AGP
274 ELSA Gloria Synergy PCI
275 Appian Jeronimo PRO (both heads) PCI
276 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
277 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
278 ASK Graphic Blaster Exxtreme AGP
279
280 To compile this driver as a module, choose M here: the
281 module will be called pm2fb.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700282
283config FB_PM2_FIFO_DISCONNECT
284 bool "enable FIFO disconnect feature"
285 depends on FB_PM2 && PCI
286 help
Krzysztof Helt4edad7f2008-10-15 22:03:32 -0700287 Support the Permedia2 FIFO disconnect feature.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700288
289config FB_ARMCLCD
290 tristate "ARM PrimeCell PL110 support"
291 depends on FB && ARM && ARM_AMBA
292 select FB_CFB_FILLRECT
293 select FB_CFB_COPYAREA
294 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700295 help
296 This framebuffer device driver is for the ARM PrimeCell PL110
297 Colour LCD controller. ARM PrimeCells provide the building
298 blocks for System on a Chip devices.
299
300 If you want to compile this as a module (=code which can be
301 inserted into and removed from the running kernel), say M
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +0500302 here and read <file:Documentation/kbuild/modules.txt>. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700303 will be called amba-clcd.
304
Marc Singer903e2bb2006-05-16 11:41:30 +0100305choice
306
307 depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
308 prompt "LCD Panel"
309 default FB_ARMCLCD_SHARP_LQ035Q7DB02
310
311config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
312 bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
313 help
314 This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
Matt LaPlantecab00892006-10-03 22:36:44 +0200315 color QVGA, HRTFT panel. The LogicPD device includes
Marc Singer903e2bb2006-05-16 11:41:30 +0100316 an integrated HRTFT controller IC.
317 The native resolution is 240x320.
318
319config FB_ARMCLCD_SHARP_LQ057Q3DC02
320 bool "LogicPD LCD 5.7\" QVGA"
321 help
322 This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
323 color QVGA, TFT panel. The LogicPD device includes an
324 The native resolution is 320x240.
325
326config FB_ARMCLCD_SHARP_LQ64D343
327 bool "LogicPD LCD 6.4\" VGA"
328 help
329 This is an implementation of the Sharp LQ64D343, a 6.4"
330 color VGA, TFT panel. The LogicPD device includes an
331 The native resolution is 640x480.
332
333config FB_ARMCLCD_SHARP_LQ10D368
334 bool "LogicPD LCD 10.4\" VGA"
335 help
336 This is an implementation of the Sharp LQ10D368, a 10.4"
337 color VGA, TFT panel. The LogicPD device includes an
338 The native resolution is 640x480.
339
340
341config FB_ARMCLCD_SHARP_LQ121S1DG41
342 bool "LogicPD LCD 12.1\" SVGA"
343 help
344 This is an implementation of the Sharp LQ121S1DG41, a 12.1"
345 color SVGA, TFT panel. The LogicPD device includes an
346 The native resolution is 800x600.
347
348 This panel requires a clock rate may be an integer fraction
349 of the base LCDCLK frequency. The driver will select the
350 highest frequency available that is lower than the maximum
351 allowed. The panel may flicker if the clock rate is
352 slower than the recommended minimum.
353
354config FB_ARMCLCD_AUO_A070VW01_WIDE
355 bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
356 help
357 This is an implementation of the AU Optronics, a 7.0"
358 WIDE Color. The native resolution is 234x480.
359
360config FB_ARMCLCD_HITACHI
361 bool "Hitachi Wide Screen 800x480"
362 help
363 This is an implementation of the Hitachi 800x480.
364
365endchoice
366
367
Linus Torvalds1da177e2005-04-16 15:20:36 -0700368config FB_ACORN
369 bool "Acorn VIDC support"
Russell King635f0252008-10-28 09:43:54 +0000370 depends on (FB = y) && ARM && ARCH_ACORN
Linus Torvalds1da177e2005-04-16 15:20:36 -0700371 select FB_CFB_FILLRECT
372 select FB_CFB_COPYAREA
373 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700374 help
375 This is the frame buffer device driver for the Acorn VIDC graphics
376 hardware found in Acorn RISC PCs and other ARM-based machines. If
377 unsure, say N.
378
379config FB_CLPS711X
380 bool "CLPS711X LCD support"
381 depends on (FB = y) && ARM && ARCH_CLPS711X
382 select FB_CFB_FILLRECT
383 select FB_CFB_COPYAREA
384 select FB_CFB_IMAGEBLIT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800385 help
386 Say Y to enable the Framebuffer driver for the CLPS7111 and
387 EP7212 processors.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700388
389config FB_SA1100
390 bool "SA-1100 LCD support"
391 depends on (FB = y) && ARM && ARCH_SA1100
392 select FB_CFB_FILLRECT
393 select FB_CFB_COPYAREA
394 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700395 help
396 This is a framebuffer device for the SA-1100 LCD Controller.
397 See <http://www.linux-fbdev.org/> for information on framebuffer
398 devices.
399
400 If you plan to use the LCD display with your SA-1100 system, say
401 Y here.
402
Baruch Siachf6014412010-02-17 12:33:23 +0200403config HAVE_FB_IMX
404 bool
405
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700406config FB_IMX
407 tristate "Motorola i.MX LCD support"
Baruch Siachf6014412010-02-17 12:33:23 +0200408 depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2)
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700409 select FB_CFB_FILLRECT
410 select FB_CFB_COPYAREA
411 select FB_CFB_IMAGEBLIT
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700412
Linus Torvalds1da177e2005-04-16 15:20:36 -0700413config FB_CYBER2000
414 tristate "CyberPro 2000/2010/5000 support"
415 depends on FB && PCI && (BROKEN || !SPARC64)
416 select FB_CFB_FILLRECT
417 select FB_CFB_COPYAREA
418 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700419 help
420 This enables support for the Integraphics CyberPro 20x0 and 5000
421 VGA chips used in the Rebel.com Netwinder and other machines.
422 Say Y if you have a NetWinder or a graphics card containing this
423 device, otherwise say N.
424
425config FB_APOLLO
426 bool
427 depends on (FB = y) && APOLLO
428 default y
429 select FB_CFB_FILLRECT
430 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700431
432config FB_Q40
433 bool
434 depends on (FB = y) && Q40
435 default y
436 select FB_CFB_FILLRECT
437 select FB_CFB_COPYAREA
438 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700439
440config FB_AMIGA
441 tristate "Amiga native chipset support"
442 depends on FB && AMIGA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700443 help
444 This is the frame buffer device driver for the builtin graphics
445 chipset found in Amigas.
446
447 To compile this driver as a module, choose M here: the
448 module will be called amifb.
449
450config FB_AMIGA_OCS
451 bool "Amiga OCS chipset support"
452 depends on FB_AMIGA
453 help
454 This enables support for the original Agnus and Denise video chips,
455 found in the Amiga 1000 and most A500's and A2000's. If you intend
456 to run Linux on any of these systems, say Y; otherwise say N.
457
458config FB_AMIGA_ECS
459 bool "Amiga ECS chipset support"
460 depends on FB_AMIGA
461 help
462 This enables support for the Enhanced Chip Set, found in later
463 A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
464 you intend to run Linux on any of these systems, say Y; otherwise
465 say N.
466
467config FB_AMIGA_AGA
468 bool "Amiga AGA chipset support"
469 depends on FB_AMIGA
470 help
471 This enables support for the Advanced Graphics Architecture (also
472 known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
473 and CD32. If you intend to run Linux on any of these systems, say Y;
474 otherwise say N.
475
Linus Torvalds1da177e2005-04-16 15:20:36 -0700476config FB_FM2
477 bool "Amiga FrameMaster II/Rainbow II support"
478 depends on (FB = y) && ZORRO
479 select FB_CFB_FILLRECT
480 select FB_CFB_COPYAREA
481 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700482 help
483 This is the frame buffer device driver for the Amiga FrameMaster
484 card from BSC (exhibited 1992 but not shipped as a CBM product).
485
Jaya Kumar1154ea72005-06-21 17:17:04 -0700486config FB_ARC
487 tristate "Arc Monochrome LCD board support"
488 depends on FB && X86
Antonino A. Daplas922e6f92007-05-08 00:38:58 -0700489 select FB_SYS_FILLRECT
490 select FB_SYS_COPYAREA
491 select FB_SYS_IMAGEBLIT
Antonino A. Daplasd9a05f12007-05-08 00:39:04 -0700492 select FB_SYS_FOPS
Jaya Kumar1154ea72005-06-21 17:17:04 -0700493 help
494 This enables support for the Arc Monochrome LCD board. The board
495 is based on the KS-108 lcd controller and is typically a matrix
496 of 2*n chips. This driver was tested with a 128x64 panel. This
497 driver supports it for use with x86 SBCs through a 16 bit GPIO
Matt LaPlante09509602006-10-03 22:31:37 +0200498 interface (8 bit data, 8 bit control). If you anticipate using
Jaya Kumar1154ea72005-06-21 17:17:04 -0700499 this driver, say Y or M; otherwise say N. You must specify the
500 GPIO IO address to be used for setting control and data.
501
Linus Torvalds1da177e2005-04-16 15:20:36 -0700502config FB_ATARI
503 bool "Atari native chipset support"
Michael Schmitza1005012007-05-01 22:32:39 +0200504 depends on (FB = y) && ATARI
505 select FB_CFB_FILLRECT
506 select FB_CFB_COPYAREA
507 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700508 help
509 This is the frame buffer device driver for the builtin graphics
510 chipset found in Ataris.
511
512config FB_OF
513 bool "Open Firmware frame buffer device support"
Stephen Rothwellbed59272007-03-04 17:04:44 +1100514 depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700515 select FB_CFB_FILLRECT
516 select FB_CFB_COPYAREA
517 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700518 select FB_MACMODES
519 help
520 Say Y if you want support with Open Firmware for your graphics
521 board.
522
523config FB_CONTROL
524 bool "Apple \"control\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700525 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700526 select FB_CFB_FILLRECT
527 select FB_CFB_COPYAREA
528 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700529 select FB_MACMODES
530 help
531 This driver supports a frame buffer for the graphics adapter in the
532 Power Macintosh 7300 and others.
533
534config FB_PLATINUM
535 bool "Apple \"platinum\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700536 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700537 select FB_CFB_FILLRECT
538 select FB_CFB_COPYAREA
539 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700540 select FB_MACMODES
541 help
542 This driver supports a frame buffer for the "platinum" graphics
543 adapter in some Power Macintoshes.
544
545config FB_VALKYRIE
546 bool "Apple \"valkyrie\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700547 depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700548 select FB_CFB_FILLRECT
549 select FB_CFB_COPYAREA
550 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700551 select FB_MACMODES
552 help
553 This driver supports a frame buffer for the "valkyrie" graphics
554 adapter in some Power Macintoshes.
555
556config FB_CT65550
557 bool "Chips 65550 display support"
Randy Dunlap0f8c02342007-11-14 16:58:45 -0800558 depends on (FB = y) && PPC32 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700559 select FB_CFB_FILLRECT
560 select FB_CFB_COPYAREA
561 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700562 help
563 This is the frame buffer device driver for the Chips & Technologies
564 65550 graphics chip in PowerBooks.
565
566config FB_ASILIANT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800567 bool "Asiliant (Chips) 69000 display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700568 depends on (FB = y) && PCI
569 select FB_CFB_FILLRECT
570 select FB_CFB_COPYAREA
571 select FB_CFB_IMAGEBLIT
Antonino A. Daplas4de0b1e2006-04-27 18:40:47 -0700572 help
573 This is the frame buffer device driver for the Asiliant 69030 chipset
Linus Torvalds1da177e2005-04-16 15:20:36 -0700574
575config FB_IMSTT
576 bool "IMS Twin Turbo display support"
577 depends on (FB = y) && PCI
578 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700579 select FB_MACMODES if PPC
580 help
581 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
582 many Macintosh and compatible computers.
583
Linus Torvalds1da177e2005-04-16 15:20:36 -0700584config FB_VGA16
585 tristate "VGA 16-color graphics support"
586 depends on FB && (X86 || PPC)
587 select FB_CFB_FILLRECT
588 select FB_CFB_COPYAREA
589 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700590 select VGASTATE
Antonino A. Daplasd60d2d82007-05-08 00:39:12 -0700591 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700592 help
593 This is the frame buffer device driver for VGA 16 color graphic
594 cards. Say Y if you have such a card.
595
596 To compile this driver as a module, choose M here: the
597 module will be called vga16fb.
598
Michael Henneriche9fa7c42007-10-16 01:29:38 -0700599config FB_BF54X_LQ043
600 tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
Mike Frysingere7a05aa2008-04-28 02:15:47 -0700601 depends on FB && (BF54x) && !BF542
Michael Henneriche9fa7c42007-10-16 01:29:38 -0700602 select FB_CFB_FILLRECT
603 select FB_CFB_COPYAREA
604 select FB_CFB_IMAGEBLIT
605 help
606 This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
607
Michael Hennerich99eeed47a2008-03-10 11:44:04 -0700608config FB_BFIN_T350MCQB
609 tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
610 depends on FB && BLACKFIN
611 select BFIN_GPTIMERS
612 select FB_CFB_FILLRECT
613 select FB_CFB_COPYAREA
614 select FB_CFB_IMAGEBLIT
615 help
616 This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
617 This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
618 It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
619
Michael Hennerich9cfe4a92009-12-15 16:46:21 -0800620config FB_BFIN_LQ035Q1
621 tristate "SHARP LQ035Q1DH02 TFT LCD"
622 depends on FB && BLACKFIN && SPI
623 select FB_CFB_FILLRECT
624 select FB_CFB_COPYAREA
625 select FB_CFB_IMAGEBLIT
626 select BFIN_GPTIMERS
627 help
628 This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
629 the Blackfin Landscape LCD EZ-Extender Card.
630 This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
631 It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
632
633 To compile this driver as a module, choose M here: the
634 module will be called bfin-lq035q1-fb.
Michael Hennerich99eeed47a2008-03-10 11:44:04 -0700635
Linus Torvalds1da177e2005-04-16 15:20:36 -0700636config FB_STI
637 tristate "HP STI frame buffer device support"
638 depends on FB && PARISC
639 select FB_CFB_FILLRECT
640 select FB_CFB_COPYAREA
641 select FB_CFB_IMAGEBLIT
Alexander Beregalov17085a92009-04-03 13:33:32 +0000642 select STI_CONSOLE
643 select VT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700644 default y
645 ---help---
646 STI refers to the HP "Standard Text Interface" which is a set of
647 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
648 Enabling this option will implement the linux framebuffer device
649 using calls to the STI BIOS routines for initialisation.
650
651 If you enable this option, you will get a planar framebuffer device
652 /dev/fb which will work on the most common HP graphic cards of the
653 NGLE family, including the artist chips (in the 7xx and Bxxx series),
654 HCRX, HCRX24, CRX, CRX24 and VisEG series.
655
656 It is safe to enable this option, so you should probably say "Y".
657
658config FB_MAC
659 bool "Generic Macintosh display support"
660 depends on (FB = y) && MAC
661 select FB_CFB_FILLRECT
662 select FB_CFB_COPYAREA
663 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700664 select FB_MACMODES
665
Linus Torvalds1da177e2005-04-16 15:20:36 -0700666config FB_HP300
667 bool
Geert Uytterhoevenad7e4842008-05-18 20:47:09 +0200668 depends on (FB = y) && DIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700669 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700670 default y
671
672config FB_TGA
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700673 tristate "TGA/SFB+ framebuffer support"
674 depends on FB && (ALPHA || TC)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700675 select FB_CFB_FILLRECT
676 select FB_CFB_COPYAREA
677 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800678 select BITREVERSE
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700679 ---help---
680 This is the frame buffer device driver for generic TGA and SFB+
681 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
682 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
683 TURBOchannel cards, also known as PMAGD-A, -B and -C.
684
685 Due to hardware limitations ZLX-E2 and E3 cards are not supported
686 for DECstation 5000/200 systems. Additionally due to firmware
687 limitations these cards may cause troubles with booting DECstation
688 5000/240 and /260 systems, but are fully supported under Linux if
689 you manage to get it going. ;-)
690
691 Say Y if you have one of those.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700692
Michal Januszewski8bdb3a22007-10-16 01:28:26 -0700693config FB_UVESA
694 tristate "Userspace VESA VGA graphics support"
695 depends on FB && CONNECTOR
696 select FB_CFB_FILLRECT
697 select FB_CFB_COPYAREA
698 select FB_CFB_IMAGEBLIT
699 select FB_MODE_HELPERS
700 help
701 This is the frame buffer driver for generic VBE 2.0 compliant
702 graphic cards. It can also take advantage of VBE 3.0 features,
703 such as refresh rate adjustment.
704
705 This driver generally provides more features than vesafb but
706 requires a userspace helper application called 'v86d'. See
707 <file:Documentation/fb/uvesafb.txt> for more information.
708
709 If unsure, say N.
710
Linus Torvalds1da177e2005-04-16 15:20:36 -0700711config FB_VESA
712 bool "VESA VGA graphics support"
Brian Gerst0d078f62005-10-30 14:59:20 -0800713 depends on (FB = y) && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -0700714 select FB_CFB_FILLRECT
715 select FB_CFB_COPYAREA
716 select FB_CFB_IMAGEBLIT
Michal Januszewski4d31a2b2008-10-15 22:03:51 -0700717 select FB_BOOT_VESA_SUPPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700718 help
719 This is the frame buffer device driver for generic VESA 2.0
720 compliant graphic cards. The older VESA 1.2 cards are not supported.
721 You will get a boot time penguin logo at no additional cost. Please
722 read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
723
Huang, Ying7c831722007-11-28 16:21:55 -0800724config FB_EFI
725 bool "EFI-based Framebuffer Support"
Edgar Hucekb64ef8a2006-08-13 23:24:16 -0700726 depends on (FB = y) && X86 && EFI
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700727 select FB_CFB_FILLRECT
728 select FB_CFB_COPYAREA
729 select FB_CFB_IMAGEBLIT
730 help
Peter Jones7c08c9a2008-10-15 22:03:43 -0700731 This is the EFI frame buffer device driver. If the firmware on
732 your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
733 using the EFI framebuffer as your console.
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700734
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700735config FB_N411
736 tristate "N411 Apollo/Hecuba devkit support"
Jaya Kumaraad09e52007-05-08 00:37:43 -0700737 depends on FB && X86 && MMU
Antonino A. Daplasd6774932007-05-08 00:39:00 -0700738 select FB_SYS_FILLRECT
739 select FB_SYS_COPYAREA
740 select FB_SYS_IMAGEBLIT
Antonino A. Daplas28d45642007-05-08 00:39:06 -0700741 select FB_SYS_FOPS
Jaya Kumaraad09e52007-05-08 00:37:43 -0700742 select FB_DEFERRED_IO
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700743 select FB_HECUBA
Jaya Kumaraad09e52007-05-08 00:37:43 -0700744 help
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700745 This enables support for the Apollo display controller in its
746 Hecuba form using the n411 devkit.
Jaya Kumaraad09e52007-05-08 00:37:43 -0700747
Linus Torvalds1da177e2005-04-16 15:20:36 -0700748config FB_HGA
749 tristate "Hercules mono graphics support"
750 depends on FB && X86
751 select FB_CFB_FILLRECT
752 select FB_CFB_COPYAREA
753 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700754 help
755 Say Y here if you have a Hercules mono graphics card.
756
757 To compile this driver as a module, choose M here: the
758 module will be called hgafb.
759
760 As this card technology is 15 years old, most people will answer N
761 here.
762
763config FB_HGA_ACCEL
764 bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
765 depends on FB_HGA && EXPERIMENTAL
766 ---help---
767 This will compile the Hercules mono graphics with
768 acceleration functions.
769
Linus Torvalds1da177e2005-04-16 15:20:36 -0700770config FB_SGIVW
771 tristate "SGI Visual Workstation framebuffer support"
772 depends on FB && X86_VISWS
773 select FB_CFB_FILLRECT
774 select FB_CFB_COPYAREA
775 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700776 help
777 SGI Visual Workstation support for framebuffer graphics.
778
779config FB_GBE
780 bool "SGI Graphics Backend frame buffer support"
781 depends on (FB = y) && (SGI_IP32 || X86_VISWS)
782 select FB_CFB_FILLRECT
783 select FB_CFB_COPYAREA
784 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700785 help
786 This is the frame buffer device driver for SGI Graphics Backend.
787 This chip is used in SGI O2 and Visual Workstation 320/540.
788
789config FB_GBE_MEM
790 int "Video memory size in MB"
791 depends on FB_GBE
Martin Michlmayr80c410d2006-02-24 13:04:16 -0800792 default 4
Linus Torvalds1da177e2005-04-16 15:20:36 -0700793 help
794 This is the amount of memory reserved for the framebuffer,
795 which can be any value between 1MB and 8MB.
796
Mark Fortescue1a571982005-11-29 19:34:44 -0800797config FB_SBUS
798 bool "SBUS and UPA framebuffers"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800799 depends on (FB = y) && SPARC
Mark Fortescue1a571982005-11-29 19:34:44 -0800800 help
801 Say Y if you want support for SBUS or UPA based frame buffer device.
802
Linus Torvalds1da177e2005-04-16 15:20:36 -0700803config FB_BW2
804 bool "BWtwo support"
Adrian Bunke0196302007-02-12 00:54:50 -0800805 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700806 select FB_CFB_FILLRECT
807 select FB_CFB_COPYAREA
808 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700809 help
810 This is the frame buffer device driver for the BWtwo frame buffer.
811
812config FB_CG3
813 bool "CGthree support"
Adrian Bunke0196302007-02-12 00:54:50 -0800814 depends on (FB = y) && (SPARC && FB_SBUS)
Mark Fortescue1a571982005-11-29 19:34:44 -0800815 select FB_CFB_FILLRECT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700816 select FB_CFB_COPYAREA
817 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700818 help
819 This is the frame buffer device driver for the CGthree frame buffer.
820
821config FB_CG6
822 bool "CGsix (GX,TurboGX) support"
Adrian Bunke0196302007-02-12 00:54:50 -0800823 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700824 select FB_CFB_COPYAREA
825 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700826 help
827 This is the frame buffer device driver for the CGsix (GX, TurboGX)
828 frame buffer.
829
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700830config FB_FFB
831 bool "Creator/Creator3D/Elite3D support"
832 depends on FB_SBUS && SPARC64
833 select FB_CFB_COPYAREA
834 select FB_CFB_IMAGEBLIT
835 help
836 This is the frame buffer device driver for the Creator, Creator3D,
837 and Elite3D graphics boards.
838
839config FB_TCX
840 bool "TCX (SS4/SS5 only) support"
841 depends on FB_SBUS
842 select FB_CFB_FILLRECT
843 select FB_CFB_COPYAREA
844 select FB_CFB_IMAGEBLIT
845 help
846 This is the frame buffer device driver for the TCX 24/8bit frame
847 buffer.
848
849config FB_CG14
850 bool "CGfourteen (SX) support"
851 depends on FB_SBUS
852 select FB_CFB_FILLRECT
853 select FB_CFB_COPYAREA
854 select FB_CFB_IMAGEBLIT
855 help
856 This is the frame buffer device driver for the CGfourteen frame
857 buffer on Desktop SPARCsystems with the SX graphics option.
858
859config FB_P9100
860 bool "P9100 (Sparcbook 3 only) support"
861 depends on FB_SBUS
862 select FB_CFB_FILLRECT
863 select FB_CFB_COPYAREA
864 select FB_CFB_IMAGEBLIT
865 help
866 This is the frame buffer device driver for the P9100 card
867 supported on Sparcbook 3 machines.
868
869config FB_LEO
870 bool "Leo (ZX) support"
871 depends on FB_SBUS
872 select FB_CFB_FILLRECT
873 select FB_CFB_COPYAREA
874 select FB_CFB_IMAGEBLIT
875 help
876 This is the frame buffer device driver for the SBUS-based Sun ZX
877 (leo) frame buffer cards.
878
879config FB_IGA
880 bool "IGA 168x display support"
David S. Millere11a6c22007-06-03 17:35:24 -0700881 depends on (FB = y) && SPARC32
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700882 select FB_CFB_FILLRECT
883 select FB_CFB_COPYAREA
884 select FB_CFB_IMAGEBLIT
885 help
886 This is the framebuffer device for the INTERGRAPHICS 1680 and
887 successor frame buffer cards.
888
889config FB_XVR500
890 bool "Sun XVR-500 3DLABS Wildcat support"
David S. Millere11a6c22007-06-03 17:35:24 -0700891 depends on (FB = y) && PCI && SPARC64
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700892 select FB_CFB_FILLRECT
893 select FB_CFB_COPYAREA
894 select FB_CFB_IMAGEBLIT
895 help
896 This is the framebuffer device for the Sun XVR-500 and similar
897 graphics cards based upon the 3DLABS Wildcat chipset. The driver
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200898 only works on sparc64 systems where the system firmware has
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700899 mostly initialized the card already. It is treated as a
900 completely dumb framebuffer device.
901
902config FB_XVR2500
903 bool "Sun XVR-2500 3DLABS Wildcat support"
David S. Millere11a6c22007-06-03 17:35:24 -0700904 depends on (FB = y) && PCI && SPARC64
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700905 select FB_CFB_FILLRECT
906 select FB_CFB_COPYAREA
907 select FB_CFB_IMAGEBLIT
908 help
909 This is the framebuffer device for the Sun XVR-2500 and similar
910 graphics cards based upon the 3DLABS Wildcat chipset. The driver
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200911 only works on sparc64 systems where the system firmware has
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700912 mostly initialized the card already. It is treated as a
913 completely dumb framebuffer device.
914
David S. Miller2d378b92010-03-13 16:25:03 -0800915config FB_XVR1000
916 bool "Sun XVR-1000 support"
David S. Millerf04e8792010-03-16 14:40:42 -0700917 depends on (FB = y) && SPARC64
David S. Miller2d378b92010-03-13 16:25:03 -0800918 select FB_CFB_FILLRECT
919 select FB_CFB_COPYAREA
920 select FB_CFB_IMAGEBLIT
921 help
922 This is the framebuffer device for the Sun XVR-1000 and similar
923 graphics cards. The driver only works on sparc64 systems where
924 the system firmware has mostly initialized the card already. It
925 is treated as a completely dumb framebuffer device.
926
Linus Torvalds1da177e2005-04-16 15:20:36 -0700927config FB_PVR2
928 tristate "NEC PowerVR 2 display support"
929 depends on FB && SH_DREAMCAST
930 select FB_CFB_FILLRECT
931 select FB_CFB_COPYAREA
932 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700933 ---help---
934 Say Y here if you have a PowerVR 2 card in your box. If you plan to
935 run linux on your Dreamcast, you will have to say Y here.
936 This driver may or may not work on other PowerVR 2 cards, but is
937 totally untested. Use at your own risk. If unsure, say N.
938
939 To compile this driver as a module, choose M here: the
940 module will be called pvr2fb.
941
942 You can pass several parameters to the driver at boot time or at
943 module load time. The parameters look like "video=pvr2:XXX", where
944 the meaning of XXX can be found at the end of the main source file
945 (<file:drivers/video/pvr2fb.c>). Please see the file
946 <file:Documentation/fb/pvr2fb.txt>.
947
948config FB_EPSON1355
949 bool "Epson 1355 framebuffer support"
Paul Mundt1a3f2882007-07-17 04:05:48 -0700950 depends on (FB = y) && ARCH_CEIVA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700951 select FB_CFB_FILLRECT
952 select FB_CFB_COPYAREA
953 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700954 help
955 Build in support for the SED1355 Epson Research Embedded RAMDAC
956 LCD/CRT Controller (since redesignated as the S1D13505) as a
957 framebuffer. Product specs at
958 <http://www.erd.epson.com/vdc/html/products.htm>.
959
Randy Dunlapecc41d52005-11-07 01:00:29 -0800960config FB_S1D13XXX
961 tristate "Epson S1D13XXX framebuffer support"
962 depends on FB
963 select FB_CFB_FILLRECT
964 select FB_CFB_COPYAREA
965 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -0800966 help
967 Support for S1D13XXX framebuffer device family (currently only
968 working with S1D13806). Product specs at
969 <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
970
Nicolas Ferre14340582007-05-10 22:23:26 -0700971config FB_ATMEL
972 tristate "AT91/AT32 LCD Controller support"
Nicolas Ferre0912e532009-06-23 16:30:56 +0200973 depends on FB && HAVE_FB_ATMEL
Nicolas Ferre14340582007-05-10 22:23:26 -0700974 select FB_CFB_FILLRECT
975 select FB_CFB_COPYAREA
976 select FB_CFB_IMAGEBLIT
977 help
978 This enables support for the AT91/AT32 LCD Controller.
979
980config FB_INTSRAM
981 bool "Frame Buffer in internal SRAM"
982 depends on FB_ATMEL && ARCH_AT91SAM9261
983 help
984 Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
985 to let frame buffer in external SDRAM.
986
Nicolas Ferre250a2692007-07-21 04:37:59 -0700987config FB_ATMEL_STN
988 bool "Use a STN display with AT91/AT32 LCD Controller"
Nicolas Ferre915190f2009-07-21 11:31:29 +0100989 depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
Nicolas Ferre250a2692007-07-21 04:37:59 -0700990 default n
991 help
992 Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
993 Controller. Say N if you want to connect a TFT.
994
995 If unsure, say N.
996
Linus Torvalds1da177e2005-04-16 15:20:36 -0700997config FB_NVIDIA
998 tristate "nVidia Framebuffer Support"
999 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +00001000 select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001001 select FB_MODE_HELPERS
1002 select FB_CFB_FILLRECT
1003 select FB_CFB_COPYAREA
1004 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -08001005 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001006 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001007 help
1008 This driver supports graphics boards with the nVidia chips, TNT
1009 and newer. For very old chipsets, such as the RIVA128, then use
1010 the rivafb.
1011 Say Y if you have such a graphics board.
1012
1013 To compile this driver as a module, choose M here: the
1014 module will be called nvidiafb.
1015
1016config FB_NVIDIA_I2C
1017 bool "Enable DDC Support"
Benjamin Herrenschmidt85f15032005-11-07 01:00:30 -08001018 depends on FB_NVIDIA
James Simmons166f60d2007-03-06 01:42:02 -08001019 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001020 help
1021 This enables I2C support for nVidia Chipsets. This is used
1022 only for getting EDID information from the attached display
1023 allowing for robust video mode handling and switching.
1024
1025 Because fbdev-2.6 requires that drivers must be able to
1026 independently validate video mode parameters, you should say Y
1027 here.
1028
Jean Delvare647f2e72007-05-10 22:23:29 -07001029config FB_NVIDIA_DEBUG
1030 bool "Lots of debug output"
1031 depends on FB_NVIDIA
1032 default n
1033 help
1034 Say Y here if you want the nVidia driver to output all sorts
1035 of debugging information to provide to the maintainer when
1036 something goes wrong.
1037
Michael Hanselmann5474c122006-06-25 05:47:08 -07001038config FB_NVIDIA_BACKLIGHT
1039 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001040 depends on FB_NVIDIA
Michael Hanselmann5474c122006-06-25 05:47:08 -07001041 default y
1042 help
1043 Say Y here if you want to control the backlight of your display.
1044
Linus Torvalds1da177e2005-04-16 15:20:36 -07001045config FB_RIVA
1046 tristate "nVidia Riva support"
1047 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +00001048 select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001049 select FB_MODE_HELPERS
1050 select FB_CFB_FILLRECT
1051 select FB_CFB_COPYAREA
1052 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -08001053 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001054 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001055 help
1056 This driver supports graphics boards with the nVidia Riva/Geforce
1057 chips.
1058 Say Y if you have such a graphics board.
1059
1060 To compile this driver as a module, choose M here: the
1061 module will be called rivafb.
1062
1063config FB_RIVA_I2C
1064 bool "Enable DDC Support"
1065 depends on FB_RIVA
James Simmons166f60d2007-03-06 01:42:02 -08001066 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001067 help
1068 This enables I2C support for nVidia Chipsets. This is used
1069 only for getting EDID information from the attached display
1070 allowing for robust video mode handling and switching.
1071
1072 Because fbdev-2.6 requires that drivers must be able to
1073 independently validate video mode parameters, you should say Y
1074 here.
1075
1076config FB_RIVA_DEBUG
Jean Delvare647f2e72007-05-10 22:23:29 -07001077 bool "Lots of debug output"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001078 depends on FB_RIVA
1079 default n
1080 help
1081 Say Y here if you want the Riva driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001082 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001083 something goes wrong.
1084
Michael Hanselmann5474c122006-06-25 05:47:08 -07001085config FB_RIVA_BACKLIGHT
1086 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001087 depends on FB_RIVA
Michael Hanselmann5474c122006-06-25 05:47:08 -07001088 default y
1089 help
1090 Say Y here if you want to control the backlight of your display.
1091
Linus Torvalds1da177e2005-04-16 15:20:36 -07001092config FB_I810
1093 tristate "Intel 810/815 support (EXPERIMENTAL)"
Krzysztof Helta1a5c3b2009-02-18 14:48:38 -08001094 depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001095 select FB_MODE_HELPERS
1096 select FB_CFB_FILLRECT
1097 select FB_CFB_COPYAREA
1098 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001099 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001100 help
1101 This driver supports the on-board graphics built in to the Intel 810
1102 and 815 chipsets. Say Y if you have and plan to use such a board.
1103
1104 To compile this driver as a module, choose M here: the
1105 module will be called i810fb.
1106
1107 For more information, please read
1108 <file:Documentation/fb/intel810.txt>
1109
1110config FB_I810_GTF
1111 bool "use VESA Generalized Timing Formula"
1112 depends on FB_I810
1113 help
1114 If you say Y, then the VESA standard, Generalized Timing Formula
1115 or GTF, will be used to calculate the required video timing values
1116 per video mode. Since the GTF allows nondiscrete timings
1117 (nondiscrete being a range of values as opposed to discrete being a
1118 set of values), you'll be able to use any combination of horizontal
1119 and vertical resolutions, and vertical refresh rates without having
1120 to specify your own timing parameters. This is especially useful
1121 to maximize the performance of an aging display, or if you just
1122 have a display with nonstandard dimensions. A VESA compliant
1123 monitor is recommended, but can still work with non-compliant ones.
1124 If you need or want this, then select this option. The timings may
1125 not be compliant with Intel's recommended values. Use at your own
1126 risk.
1127
1128 If you say N, the driver will revert to discrete video timings
1129 using a set recommended by Intel in their documentation.
1130
1131 If unsure, say N.
1132
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -07001133config FB_I810_I2C
1134 bool "Enable DDC Support"
Antonino A. Daplasdb845022005-09-13 01:25:02 -07001135 depends on FB_I810 && FB_I810_GTF
Antonino A. Daplase80987f2006-10-03 01:14:44 -07001136 select FB_DDC
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -07001137 help
1138
Alan Hourihanedbe7e422007-05-08 00:39:25 -07001139config FB_LE80578
1140 tristate "Intel LE80578 (Vermilion) support"
1141 depends on FB && PCI && X86
1142 select FB_MODE_HELPERS
1143 select FB_CFB_FILLRECT
1144 select FB_CFB_COPYAREA
1145 select FB_CFB_IMAGEBLIT
1146 help
1147 This driver supports the LE80578 (Vermilion Range) chipset
1148
1149config FB_CARILLO_RANCH
1150 tristate "Intel Carillo Ranch support"
1151 depends on FB_LE80578 && FB && PCI && X86
1152 help
1153 This driver supports the LE80578 (Carillo Ranch) board
1154
Linus Torvalds1da177e2005-04-16 15:20:36 -07001155config FB_INTEL
Maik Broemme0e170c72008-04-28 02:15:43 -07001156 tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
Jesse Barnesba0ab822009-07-03 11:24:46 -07001157 depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EMBEDDED
Linus Torvalds1da177e2005-04-16 15:20:36 -07001158 select FB_MODE_HELPERS
1159 select FB_CFB_FILLRECT
1160 select FB_CFB_COPYAREA
1161 select FB_CFB_IMAGEBLIT
Krzysztof Helt4b198282009-06-18 16:49:21 -07001162 select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
Jesse Barnesba0ab822009-07-03 11:24:46 -07001163 depends on !DRM_I915
Linus Torvalds1da177e2005-04-16 15:20:36 -07001164 help
1165 This driver supports the on-board graphics built in to the Intel
Maik Broemme0e170c72008-04-28 02:15:43 -07001166 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001167 Say Y if you have and plan to use such a board.
1168
Krzysztof Helt4b198282009-06-18 16:49:21 -07001169 To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
1170
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001171 To compile this driver as a module, choose M here: the
Linus Torvalds1da177e2005-04-16 15:20:36 -07001172 module will be called intelfb.
1173
Christian Merkled463d342006-08-22 10:07:01 +10001174 For more information, please read <file:Documentation/fb/intelfb.txt>
1175
Linus Torvalds1da177e2005-04-16 15:20:36 -07001176config FB_INTEL_DEBUG
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001177 bool "Intel driver Debug Messages"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001178 depends on FB_INTEL
1179 ---help---
1180 Say Y here if you want the Intel driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001181 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001182 something goes wrong.
1183
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001184config FB_INTEL_I2C
1185 bool "DDC/I2C for Intel framebuffer support"
1186 depends on FB_INTEL
James Simmons166f60d2007-03-06 01:42:02 -08001187 select FB_DDC
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001188 default y
1189 help
1190 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
1191
Linus Torvalds1da177e2005-04-16 15:20:36 -07001192config FB_MATROX
1193 tristate "Matrox acceleration"
1194 depends on FB && PCI
1195 select FB_CFB_FILLRECT
1196 select FB_CFB_COPYAREA
1197 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001198 select FB_TILEBLITTING
1199 select FB_MACMODES if PPC_PMAC
1200 ---help---
1201 Say Y here if you have a Matrox Millennium, Matrox Millennium II,
1202 Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
1203 Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
1204 Matrox G400, G450 or G550 card in your box.
1205
1206 To compile this driver as a module, choose M here: the
1207 module will be called matroxfb.
1208
1209 You can pass several parameters to the driver at boot time or at
1210 module load time. The parameters look like "video=matrox:XXX", and
1211 are described in <file:Documentation/fb/matroxfb.txt>.
1212
1213config FB_MATROX_MILLENIUM
1214 bool "Millennium I/II support"
1215 depends on FB_MATROX
1216 help
1217 Say Y here if you have a Matrox Millennium or Matrox Millennium II
1218 video card. If you select "Advanced lowlevel driver options" below,
1219 you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
1220 packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
1221 also use font widths different from 8.
1222
1223config FB_MATROX_MYSTIQUE
1224 bool "Mystique support"
1225 depends on FB_MATROX
1226 help
1227 Say Y here if you have a Matrox Mystique or Matrox Mystique 220
1228 video card. If you select "Advanced lowlevel driver options" below,
1229 you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
1230 packed pixel and 32 bpp packed pixel. You can also use font widths
1231 different from 8.
1232
1233config FB_MATROX_G
1234 bool "G100/G200/G400/G450/G550 support"
1235 depends on FB_MATROX
1236 ---help---
1237 Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
1238 video card. If you select "Advanced lowlevel driver options", you
1239 should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
1240 pixel and 32 bpp packed pixel. You can also use font widths
1241 different from 8.
1242
Jean Delvareee831262009-05-12 13:19:41 -07001243 If you need support for G400 secondary head, you must say Y to
1244 "Matrox I2C support" and "G400 second head support" right below.
1245 G450/G550 secondary head and digital output are supported without
1246 additional modules.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001247
1248 The driver starts in monitor mode. You must use the matroxset tool
1249 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
1250 swap primary and secondary head outputs, or to change output mode.
1251 Secondary head driver always start in 640x480 resolution and you
1252 must use fbset to change it.
1253
1254 Do not forget that second head supports only 16 and 32 bpp
1255 packed pixels, so it is a good idea to compile them into the kernel
1256 too. You can use only some font widths, as the driver uses generic
1257 painting procedures (the secondary head does not use acceleration
1258 engine).
1259
1260 G450/G550 hardware can display TV picture only from secondary CRTC,
1261 and it performs no scaling, so picture must have 525 or 625 lines.
1262
1263config FB_MATROX_I2C
1264 tristate "Matrox I2C support"
James Simmons166f60d2007-03-06 01:42:02 -08001265 depends on FB_MATROX
1266 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001267 ---help---
1268 This drivers creates I2C buses which are needed for accessing the
1269 DDC (I2C) bus present on all Matroxes, an I2C bus which
1270 interconnects Matrox optional devices, like MGA-TVO on G200 and
1271 G400, and the secondary head DDC bus, present on G400 only.
1272
1273 You can say Y or M here if you want to experiment with monitor
1274 detection code. You must say Y or M here if you want to use either
1275 second head of G400 or MGA-TVO on G200 or G400.
1276
1277 If you compile it as module, it will create a module named
1278 i2c-matroxfb.
1279
1280config FB_MATROX_MAVEN
1281 tristate "G400 second head support"
1282 depends on FB_MATROX_G && FB_MATROX_I2C
1283 ---help---
1284 WARNING !!! This support does not work with G450 !!!
1285
1286 Say Y or M here if you want to use a secondary head (meaning two
1287 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1288 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1289 secondary head output is blanked while you are in X. With XFree
1290 3.9.17 preview you can use both heads if you use SVGA over fbdev or
1291 the fbdev driver on first head and the fbdev driver on second head.
1292
1293 If you compile it as module, two modules are created,
1294 matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
1295 both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
1296 also load i2c-matroxfb to get it to run.
1297
1298 The driver starts in monitor mode and you must use the matroxset
1299 tool (available at
1300 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1301 PAL or NTSC or to swap primary and secondary head outputs.
1302 Secondary head driver also always start in 640x480 resolution, you
1303 must use fbset to change it.
1304
1305 Also do not forget that second head supports only 16 and 32 bpp
1306 packed pixels, so it is a good idea to compile them into the kernel
1307 too. You can use only some font widths, as the driver uses generic
1308 painting procedures (the secondary head does not use acceleration
1309 engine).
1310
Linus Torvalds1da177e2005-04-16 15:20:36 -07001311config FB_RADEON
1312 tristate "ATI Radeon display support"
1313 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +00001314 select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001315 select FB_MODE_HELPERS
1316 select FB_CFB_FILLRECT
1317 select FB_CFB_COPYAREA
1318 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001319 select FB_MACMODES if PPC_OF
1320 help
1321 Choose this option if you want to use an ATI Radeon graphics card as
1322 a framebuffer device. There are both PCI and AGP versions. You
1323 don't need to choose this to run the Radeon in plain VGA mode.
1324
Linus Torvalds1da177e2005-04-16 15:20:36 -07001325 There is a product page at
Antonino A. Daplasf510a3c2005-09-09 13:04:41 -07001326 http://apps.ati.com/ATIcompare/
Michael Hanselmann5474c122006-06-25 05:47:08 -07001327
Linus Torvalds1da177e2005-04-16 15:20:36 -07001328config FB_RADEON_I2C
1329 bool "DDC/I2C for ATI Radeon support"
1330 depends on FB_RADEON
James Simmons166f60d2007-03-06 01:42:02 -08001331 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001332 default y
1333 help
1334 Say Y here if you want DDC/I2C support for your Radeon board.
1335
Michael Hanselmann5474c122006-06-25 05:47:08 -07001336config FB_RADEON_BACKLIGHT
1337 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001338 depends on FB_RADEON
Michael Hanselmann5474c122006-06-25 05:47:08 -07001339 default y
1340 help
1341 Say Y here if you want to control the backlight of your display.
1342
Linus Torvalds1da177e2005-04-16 15:20:36 -07001343config FB_RADEON_DEBUG
1344 bool "Lots of debug output from Radeon driver"
1345 depends on FB_RADEON
1346 default n
1347 help
1348 Say Y here if you want the Radeon driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001349 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001350 something goes wrong.
1351
1352config FB_ATY128
1353 tristate "ATI Rage128 display support"
1354 depends on FB && PCI
1355 select FB_CFB_FILLRECT
1356 select FB_CFB_COPYAREA
1357 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef2007-02-10 14:15:43 +00001358 select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001359 select FB_MACMODES if PPC_PMAC
1360 help
1361 This driver supports graphics boards with the ATI Rage128 chips.
1362 Say Y if you have such a graphics board and read
1363 <file:Documentation/fb/aty128fb.txt>.
1364
1365 To compile this driver as a module, choose M here: the
1366 module will be called aty128fb.
1367
Michael Hanselmann5474c122006-06-25 05:47:08 -07001368config FB_ATY128_BACKLIGHT
1369 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001370 depends on FB_ATY128
Michael Hanselmann5474c122006-06-25 05:47:08 -07001371 default y
1372 help
1373 Say Y here if you want to control the backlight of your display.
1374
Linus Torvalds1da177e2005-04-16 15:20:36 -07001375config FB_ATY
1376 tristate "ATI Mach64 display support" if PCI || ATARI
Andrew Mortonf2e782e2006-04-10 22:55:45 -07001377 depends on FB && !SPARC32
Linus Torvalds1da177e2005-04-16 15:20:36 -07001378 select FB_CFB_FILLRECT
1379 select FB_CFB_COPYAREA
1380 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef2007-02-10 14:15:43 +00001381 select FB_BACKLIGHT if FB_ATY_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001382 select FB_MACMODES if PPC
1383 help
1384 This driver supports graphics boards with the ATI Mach64 chips.
1385 Say Y if you have such a graphics board.
1386
1387 To compile this driver as a module, choose M here: the
1388 module will be called atyfb.
1389
1390config FB_ATY_CT
1391 bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
1392 depends on PCI && FB_ATY
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -07001393 default y if SPARC64 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001394 help
1395 Say Y here to support use of ATI's 64-bit Rage boards (or other
1396 boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1397 framebuffer device. The ATI product support page for these boards
1398 is at <http://support.ati.com/products/pc/mach64/>.
1399
1400config FB_ATY_GENERIC_LCD
1401 bool "Mach64 generic LCD support (EXPERIMENTAL)"
1402 depends on FB_ATY_CT
1403 help
1404 Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
1405 Rage XC, or Rage XL chipset.
1406
Linus Torvalds1da177e2005-04-16 15:20:36 -07001407config FB_ATY_GX
1408 bool "Mach64 GX support" if PCI
1409 depends on FB_ATY
1410 default y if ATARI
1411 help
1412 Say Y here to support use of the ATI Mach64 Graphics Expression
1413 board (or other boards based on the Mach64 GX chipset) as a
1414 framebuffer device. The ATI product support page for these boards
1415 is at
1416 <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
1417
Michael Hanselmann5474c122006-06-25 05:47:08 -07001418config FB_ATY_BACKLIGHT
1419 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001420 depends on FB_ATY
Michael Hanselmann5474c122006-06-25 05:47:08 -07001421 default y
1422 help
1423 Say Y here if you want to control the backlight of your display.
1424
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001425config FB_S3
1426 tristate "S3 Trio/Virge support"
1427 depends on FB && PCI
1428 select FB_CFB_FILLRECT
1429 select FB_CFB_COPYAREA
1430 select FB_CFB_IMAGEBLIT
1431 select FB_TILEBLITTING
1432 select FB_SVGALIB
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001433 select VGASTATE
Antonino A. Daplas8db51662007-05-08 00:39:14 -07001434 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001435 ---help---
1436 Driver for graphics boards with S3 Trio / S3 Virge chip.
1437
Linus Torvalds1da177e2005-04-16 15:20:36 -07001438config FB_SAVAGE
1439 tristate "S3 Savage support"
1440 depends on FB && PCI && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001441 select FB_MODE_HELPERS
1442 select FB_CFB_FILLRECT
1443 select FB_CFB_COPYAREA
1444 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001445 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001446 help
1447 This driver supports notebooks and computers with S3 Savage PCI/AGP
1448 chips.
1449
1450 Say Y if you have such a graphics card.
1451
1452 To compile this driver as a module, choose M here; the module
1453 will be called savagefb.
1454
1455config FB_SAVAGE_I2C
1456 bool "Enable DDC2 Support"
1457 depends on FB_SAVAGE
James Simmons166f60d2007-03-06 01:42:02 -08001458 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001459 help
1460 This enables I2C support for S3 Savage Chipsets. This is used
1461 only for getting EDID information from the attached display
1462 allowing for robust video mode handling and switching.
1463
1464 Because fbdev-2.6 requires that drivers must be able to
1465 independently validate video mode parameters, you should say Y
1466 here.
1467
1468config FB_SAVAGE_ACCEL
1469 bool "Enable Console Acceleration"
1470 depends on FB_SAVAGE
1471 default n
1472 help
1473 This option will compile in console acceleration support. If
1474 the resulting framebuffer console has bothersome glitches, then
1475 choose N here.
1476
1477config FB_SIS
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001478 tristate "SiS/XGI display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001479 depends on FB && PCI
1480 select FB_CFB_FILLRECT
1481 select FB_CFB_COPYAREA
1482 select FB_CFB_IMAGEBLIT
Krzysztof Helt4b198282009-06-18 16:49:21 -07001483 select FB_BOOT_VESA_SUPPORT if FB_SIS = y
Linus Torvalds1da177e2005-04-16 15:20:36 -07001484 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001485 This is the frame buffer device driver for the SiS 300, 315, 330
1486 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
1487 Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001488
1489 To compile this driver as a module, choose M here; the module
1490 will be called sisfb.
1491
1492config FB_SIS_300
1493 bool "SiS 300 series support"
1494 depends on FB_SIS
1495 help
1496 Say Y here to support use of the SiS 300/305, 540, 630 and 730.
1497
1498config FB_SIS_315
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001499 bool "SiS 315/330/340 series and XGI support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001500 depends on FB_SIS
1501 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001502 Say Y here to support use of the SiS 315, 330 and 340 series
1503 (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
1504 as XGI V3XT, V5, V8 and Z7.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001505
Joseph Chan6bde3ed2008-10-15 22:03:20 -07001506config FB_VIA
1507 tristate "VIA UniChrome (Pro) and Chrome9 display support"
1508 depends on FB && PCI
1509 select FB_CFB_FILLRECT
1510 select FB_CFB_COPYAREA
1511 select FB_CFB_IMAGEBLIT
Joseph Chan6bde3ed2008-10-15 22:03:20 -07001512 select I2C_ALGOBIT
1513 select I2C
1514 help
1515 This is the frame buffer device driver for Graphics chips of VIA
1516 UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
1517 CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
1518 /P4M900,VX800)
1519 Say Y if you have a VIA UniChrome graphics board.
1520
1521 To compile this driver as a module, choose M here: the
1522 module will be called viafb.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001523config FB_NEOMAGIC
1524 tristate "NeoMagic display support"
1525 depends on FB && PCI
1526 select FB_MODE_HELPERS
1527 select FB_CFB_FILLRECT
1528 select FB_CFB_COPYAREA
1529 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001530 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001531 help
1532 This driver supports notebooks with NeoMagic PCI chips.
1533 Say Y if you have such a graphics card.
1534
1535 To compile this driver as a module, choose M here: the
1536 module will be called neofb.
1537
1538config FB_KYRO
1539 tristate "IMG Kyro support"
1540 depends on FB && PCI
1541 select FB_CFB_FILLRECT
1542 select FB_CFB_COPYAREA
1543 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001544 help
1545 Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1546 graphics board.
1547
1548 To compile this driver as a module, choose M here: the
1549 module will be called kyrofb.
1550
1551config FB_3DFX
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001552 tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001553 depends on FB && PCI
1554 select FB_CFB_IMAGEBLIT
1555 select FB_CFB_FILLRECT
1556 select FB_CFB_COPYAREA
Krzysztof Heltfeff3882009-04-06 19:01:03 -07001557 select FB_MODE_HELPERS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001558 help
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001559 This driver supports graphics boards with the 3Dfx Banshee,
1560 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1561 such a graphics board.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001562
1563 To compile this driver as a module, choose M here: the
1564 module will be called tdfxfb.
1565
1566config FB_3DFX_ACCEL
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001567 bool "3Dfx Acceleration functions (EXPERIMENTAL)"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001568 depends on FB_3DFX && EXPERIMENTAL
1569 ---help---
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001570 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1571 device driver with acceleration functions.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001572
Krzysztof Heltfeff3882009-04-06 19:01:03 -07001573config FB_3DFX_I2C
1574 bool "Enable DDC/I2C support"
1575 depends on FB_3DFX && EXPERIMENTAL
1576 select FB_DDC
1577 default y
1578 help
1579 Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
1580
Linus Torvalds1da177e2005-04-16 15:20:36 -07001581config FB_VOODOO1
1582 tristate "3Dfx Voodoo Graphics (sst1) support"
1583 depends on FB && PCI
1584 select FB_CFB_FILLRECT
1585 select FB_CFB_COPYAREA
1586 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001587 ---help---
1588 Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
1589 Voodoo2 (cvg) based graphics card.
1590
1591 To compile this driver as a module, choose M here: the
1592 module will be called sstfb.
1593
1594 WARNING: Do not use any application that uses the 3D engine
1595 (namely glide) while using this driver.
Dirk Hohndele4031492007-10-30 13:37:19 -07001596 Please read the <file:Documentation/fb/sstfb.txt> for supported
Linus Torvalds1da177e2005-04-16 15:20:36 -07001597 options and other important info support.
1598
Ondrej Zajicek558b7bd2007-05-09 02:35:31 -07001599config FB_VT8623
1600 tristate "VIA VT8623 support"
1601 depends on FB && PCI
1602 select FB_CFB_FILLRECT
1603 select FB_CFB_COPYAREA
1604 select FB_CFB_IMAGEBLIT
1605 select FB_TILEBLITTING
1606 select FB_SVGALIB
1607 select VGASTATE
1608 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1609 ---help---
1610 Driver for CastleRock integrated graphics core in the
1611 VIA VT8623 [Apollo CLE266] chipset.
1612
Linus Torvalds1da177e2005-04-16 15:20:36 -07001613config FB_TRIDENT
Krzysztof Helt04645fc2009-03-31 15:25:48 -07001614 tristate "Trident/CyberXXX/CyberBlade support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001615 depends on FB && PCI
1616 select FB_CFB_FILLRECT
1617 select FB_CFB_COPYAREA
1618 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001619 ---help---
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001620 This is the frame buffer device driver for Trident PCI/AGP chipsets.
1621 Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
1622 and Blade XP.
1623 There are also integrated versions of these chips called CyberXXXX,
1624 CyberImage or CyberBlade. These chips are mostly found in laptops
Krzysztof Heltddb53d42009-03-31 15:25:40 -07001625 but also on some motherboards including early VIA EPIA motherboards.
1626 For more information, read <file:Documentation/fb/tridentfb.txt>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001627
1628 Say Y if you have such a graphics board.
1629
1630 To compile this driver as a module, choose M here: the
1631 module will be called tridentfb.
1632
Ondrej Zajicek681e1472007-05-09 02:35:31 -07001633config FB_ARK
1634 tristate "ARK 2000PV support"
1635 depends on FB && PCI
1636 select FB_CFB_FILLRECT
1637 select FB_CFB_COPYAREA
1638 select FB_CFB_IMAGEBLIT
1639 select FB_TILEBLITTING
1640 select FB_SVGALIB
1641 select VGASTATE
1642 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1643 ---help---
1644 Driver for PCI graphics boards with ARK 2000PV chip
1645 and ICS 5342 RAMDAC.
1646
Linus Torvalds1da177e2005-04-16 15:20:36 -07001647config FB_PM3
Krzysztof Heltf23a06f2007-05-10 22:23:25 -07001648 tristate "Permedia3 support (EXPERIMENTAL)"
1649 depends on FB && PCI && EXPERIMENTAL
1650 select FB_CFB_FILLRECT
1651 select FB_CFB_COPYAREA
1652 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001653 help
1654 This is the frame buffer device driver for the 3DLabs Permedia3
1655 chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
1656 similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
1657 and maybe other boards.
1658
Sebastian Siewior2ece5f432008-07-23 21:30:49 -07001659config FB_CARMINE
1660 tristate "Fujitsu carmine frame buffer support"
1661 depends on FB && PCI
1662 select FB_CFB_FILLRECT
1663 select FB_CFB_COPYAREA
1664 select FB_CFB_IMAGEBLIT
1665 help
1666 This is the frame buffer device driver for the Fujitsu Carmine chip.
1667 The driver provides two independent frame buffer devices.
1668
1669choice
1670 depends on FB_CARMINE
1671 prompt "DRAM timing"
1672 default FB_CARMINE_DRAM_EVAL
1673
1674config FB_CARMINE_DRAM_EVAL
1675 bool "Eval board timings"
1676 help
1677 Use timings which work on the eval card.
1678
1679config CARMINE_DRAM_CUSTOM
1680 bool "Custom board timings"
1681 help
1682 Use custom board timings.
1683endchoice
1684
Linus Torvalds1da177e2005-04-16 15:20:36 -07001685config FB_AU1100
1686 bool "Au1100 LCD Driver"
Ralf Baechled1709e42007-07-23 18:43:50 -07001687 depends on (FB = y) && MIPS && SOC_AU1100
1688 select FB_CFB_FILLRECT
1689 select FB_CFB_COPYAREA
1690 select FB_CFB_IMAGEBLIT
1691 help
1692 This is the framebuffer driver for the AMD Au1100 SOC. It can drive
1693 various panels and CRTs by passing in kernel cmd line option
1694 au1100fb:panel=<name>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001695
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001696config FB_AU1200
1697 bool "Au1200 LCD Driver"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001698 depends on (FB = y) && MIPS && SOC_AU1200
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001699 select FB_CFB_FILLRECT
1700 select FB_CFB_COPYAREA
1701 select FB_CFB_IMAGEBLIT
1702 help
1703 This is the framebuffer driver for the AMD Au1200 SOC. It can drive
1704 various panels and CRTs by passing in kernel cmd line option
1705 au1200fb:panel=<name>.
1706
Linus Torvalds1da177e2005-04-16 15:20:36 -07001707source "drivers/video/geode/Kconfig"
1708
Linus Torvalds1da177e2005-04-16 15:20:36 -07001709config FB_HIT
1710 tristate "HD64461 Frame Buffer support"
1711 depends on FB && HD64461
1712 select FB_CFB_FILLRECT
1713 select FB_CFB_COPYAREA
1714 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001715 help
1716 This is the frame buffer device driver for the Hitachi HD64461 LCD
1717 frame buffer card.
1718
1719config FB_PMAG_AA
1720 bool "PMAG-AA TURBOchannel framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001721 depends on (FB = y) && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001722 select FB_CFB_FILLRECT
1723 select FB_CFB_COPYAREA
1724 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001725 help
1726 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1727 used mainly in the MIPS-based DECstation series.
1728
1729config FB_PMAG_BA
Maciej W. Rozycki335dc502007-02-05 16:28:28 -08001730 tristate "PMAG-BA TURBOchannel framebuffer support"
1731 depends on FB && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001732 select FB_CFB_FILLRECT
1733 select FB_CFB_COPYAREA
1734 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001735 help
1736 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1737 used mainly in the MIPS-based DECstation series.
1738
1739config FB_PMAGB_B
Maciej W. Rozycki9084b002007-02-05 16:28:29 -08001740 tristate "PMAGB-B TURBOchannel framebuffer support"
Maciej W. Rozycki28ea28a2007-10-16 01:29:28 -07001741 depends on FB && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001742 select FB_CFB_FILLRECT
1743 select FB_CFB_COPYAREA
1744 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001745 help
1746 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1747 in the MIPS-based DECstation series. The card is currently only
1748 supported in 1280x1024x8 mode.
1749
1750config FB_MAXINE
1751 bool "Maxine (Personal DECstation) onboard framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001752 depends on (FB = y) && MACH_DECSTATION
Linus Torvalds1da177e2005-04-16 15:20:36 -07001753 select FB_CFB_FILLRECT
1754 select FB_CFB_COPYAREA
1755 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001756 help
1757 Support for the onboard framebuffer (1024x768x8) in the Personal
1758 DECstation series (Personal DECstation 5000/20, /25, /33, /50,
1759 Codename "Maxine").
1760
Linus Torvalds1da177e2005-04-16 15:20:36 -07001761config FB_G364
Yoichi Yuasab38817d2005-07-27 11:43:28 -07001762 bool "G364 frame buffer support"
1763 depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001764 select FB_CFB_FILLRECT
1765 select FB_CFB_COPYAREA
1766 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001767 help
1768 The G364 driver is the framebuffer used in MIPS Magnum 4000 and
1769 Olivetti M700-10 systems.
1770
1771config FB_68328
1772 bool "Motorola 68328 native frame buffer support"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001773 depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001774 select FB_CFB_FILLRECT
1775 select FB_CFB_COPYAREA
1776 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001777 help
1778 Say Y here if you want to support the built-in frame buffer of
1779 the Motorola 68328 CPU family.
1780
Lennert Buytenhek638772c2009-02-11 17:25:24 +08001781config FB_PXA168
1782 tristate "PXA168/910 LCD framebuffer support"
1783 depends on FB && (CPU_PXA168 || CPU_PXA910)
1784 select FB_CFB_FILLRECT
1785 select FB_CFB_COPYAREA
1786 select FB_CFB_IMAGEBLIT
1787 ---help---
1788 Frame buffer driver for the built-in LCD controller in the Marvell
1789 MMP processor.
1790
Linus Torvalds1da177e2005-04-16 15:20:36 -07001791config FB_PXA
1792 tristate "PXA LCD framebuffer support"
1793 depends on FB && ARCH_PXA
1794 select FB_CFB_FILLRECT
1795 select FB_CFB_COPYAREA
1796 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001797 ---help---
1798 Frame buffer driver for the built-in LCD controller in the Intel
1799 PXA2x0 processor.
1800
1801 This driver is also available as a module ( = code which can be
1802 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001803 module will be called pxafb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001804 say M here and read <file:Documentation/kbuild/modules.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001805
1806 If unsure, say N.
1807
Eric Miao198fc102008-12-23 17:49:43 +08001808config FB_PXA_OVERLAY
1809 bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
1810 default n
1811 depends on FB_PXA && (PXA27x || PXA3xx)
1812
Eric Miao3c42a442008-04-30 00:52:26 -07001813config FB_PXA_SMARTPANEL
1814 bool "PXA Smartpanel LCD support"
Eric Miao7f1133c2008-04-30 00:52:27 -07001815 default n
Eric Miao3c42a442008-04-30 00:52:26 -07001816 depends on FB_PXA
1817
Linus Torvalds1da177e2005-04-16 15:20:36 -07001818config FB_PXA_PARAMETERS
1819 bool "PXA LCD command line parameters"
1820 default n
1821 depends on FB_PXA
1822 ---help---
1823 Enable the use of kernel command line or module parameters
1824 to configure the physical properties of the LCD panel when
1825 using the PXA LCD driver.
1826
1827 This option allows you to override the panel parameters
1828 supplied by the platform in order to support multiple
1829 different models of flatpanel. If you will only be using a
1830 single model of flatpanel then you can safely leave this
1831 option disabled.
1832
1833 <file:Documentation/fb/pxafb.txt> describes the available parameters.
1834
Mike Rapoport22caf042006-07-14 00:24:34 -07001835config FB_MBX
1836 tristate "2700G LCD framebuffer support"
1837 depends on FB && ARCH_PXA
1838 select FB_CFB_FILLRECT
1839 select FB_CFB_COPYAREA
1840 select FB_CFB_IMAGEBLIT
1841 ---help---
1842 Framebuffer driver for the Intel 2700G (Marathon) Graphics
1843 Accelerator
1844
1845config FB_MBX_DEBUG
1846 bool "Enable debugging info via debugfs"
1847 depends on FB_MBX && DEBUG_FS
1848 default n
1849 ---help---
1850 Enable this if you want debugging information using the debug
1851 filesystem (debugfs)
1852
1853 If unsure, say N.
1854
York Sun9b53a9e2008-04-28 02:15:34 -07001855config FB_FSL_DIU
1856 tristate "Freescale DIU framebuffer support"
1857 depends on FB && FSL_SOC
1858 select FB_CFB_FILLRECT
1859 select FB_CFB_COPYAREA
1860 select FB_CFB_IMAGEBLIT
1861 select PPC_LIB_RHEAP
1862 ---help---
1863 Framebuffer driver for the Freescale SoC DIU
1864
Randy Dunlapecc41d52005-11-07 01:00:29 -08001865config FB_W100
1866 tristate "W100 frame buffer support"
Philipp Zabele5dd3cb2008-07-04 09:59:52 -07001867 depends on FB && ARCH_PXA
Randy Dunlapecc41d52005-11-07 01:00:29 -08001868 select FB_CFB_FILLRECT
1869 select FB_CFB_COPYAREA
1870 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -08001871 ---help---
1872 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
Philipp Zabele5dd3cb2008-07-04 09:59:52 -07001873 It can also drive the w3220 chip found on iPAQ hx4700.
Randy Dunlapecc41d52005-11-07 01:00:29 -08001874
1875 This driver is also available as a module ( = code which can be
1876 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001877 module will be called w100fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001878 say M here and read <file:Documentation/kbuild/modules.txt>.
Randy Dunlapecc41d52005-11-07 01:00:29 -08001879
1880 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001881
Magnus Dammcfb4f5d2008-07-23 21:31:24 -07001882config FB_SH_MOBILE_LCDC
1883 tristate "SuperH Mobile LCDC framebuffer support"
Magnus Damm7278a222010-03-10 11:33:10 +00001884 depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
Magnus Damm2540c112008-12-17 17:29:49 +09001885 select FB_SYS_FILLRECT
1886 select FB_SYS_COPYAREA
1887 select FB_SYS_IMAGEBLIT
1888 select FB_SYS_FOPS
Magnus Damm85645572008-12-19 15:34:41 +09001889 select FB_DEFERRED_IO
Magnus Dammcfb4f5d2008-07-23 21:31:24 -07001890 ---help---
1891 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1892
Dmitry Baryshkovb53cde32008-10-15 22:03:55 -07001893config FB_TMIO
1894 tristate "Toshiba Mobile IO FrameBuffer support"
1895 depends on FB && MFD_CORE
1896 select FB_CFB_FILLRECT
1897 select FB_CFB_COPYAREA
1898 select FB_CFB_IMAGEBLIT
1899 ---help---
1900 Frame buffer driver for the Toshiba Mobile IO integrated as found
1901 on the Sharp SL-6000 series
1902
1903 This driver is also available as a module ( = code which can be
1904 inserted and removed from the running kernel whenever you want). The
1905 module will be called tmiofb. If you want to compile it as a module,
1906 say M here and read <file:Documentation/kbuild/modules.txt>.
1907
1908 If unsure, say N.
1909
1910config FB_TMIO_ACCELL
1911 bool "tmiofb acceleration"
1912 depends on FB_TMIO
1913 default y
1914
Ben Dooksec549a02009-03-31 15:25:39 -07001915config FB_S3C
1916 tristate "Samsung S3C framebuffer support"
1917 depends on FB && ARCH_S3C64XX
1918 select FB_CFB_FILLRECT
1919 select FB_CFB_COPYAREA
1920 select FB_CFB_IMAGEBLIT
1921 ---help---
1922 Frame buffer driver for the built-in FB controller in the Samsung
1923 SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
1924 and the S3C64XX series such as the S3C6400 and S3C6410.
1925
1926 These chips all have the same basic framebuffer design with the
1927 actual capabilities depending on the chip. For instance the S3C6400
1928 and S3C6410 support 4 hardware windows whereas the S3C24XX series
1929 currently only have two.
1930
1931 Currently the support is only for the S3C6400 and S3C6410 SoCs.
1932
1933config FB_S3C_DEBUG_REGWRITE
1934 bool "Debug register writes"
1935 depends on FB_S3C
1936 ---help---
1937 Show all register writes via printk(KERN_DEBUG)
1938
Arnaud Patard20fd5762005-09-09 13:10:07 -07001939config FB_S3C2410
1940 tristate "S3C2410 LCD framebuffer support"
1941 depends on FB && ARCH_S3C2410
1942 select FB_CFB_FILLRECT
1943 select FB_CFB_COPYAREA
1944 select FB_CFB_IMAGEBLIT
Arnaud Patard20fd5762005-09-09 13:10:07 -07001945 ---help---
1946 Frame buffer driver for the built-in LCD controller in the Samsung
1947 S3C2410 processor.
1948
1949 This driver is also available as a module ( = code which can be
1950 inserted and removed from the running kernel whenever you want). The
1951 module will be called s3c2410fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001952 say M here and read <file:Documentation/kbuild/modules.txt>.
Arnaud Patard20fd5762005-09-09 13:10:07 -07001953
1954 If unsure, say N.
1955config FB_S3C2410_DEBUG
1956 bool "S3C2410 lcd debug messages"
1957 depends on FB_S3C2410
1958 help
1959 Turn on debugging messages. Note that you can set/unset at run time
1960 through sysfs
1961
Wang Qiang86619702010-03-10 15:21:47 -08001962config FB_NUC900
1963 bool "NUC900 LCD framebuffer support"
1964 depends on FB && ARCH_W90X900
1965 select FB_CFB_FILLRECT
1966 select FB_CFB_COPYAREA
1967 select FB_CFB_IMAGEBLIT
1968 ---help---
1969 Frame buffer driver for the built-in LCD controller in the Nuvoton
1970 NUC900 processor
1971
1972config GPM1040A0_320X240
1973 bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
1974 depends on FB_NUC900
1975
1976config FB_NUC900_DEBUG
1977 bool "NUC900 lcd debug messages"
1978 depends on FB_NUC900
1979 help
1980 Turn on debugging messages. Note that you can set/unset at run time
1981 through sysfs
1982
Ben Dooks5fc404e2007-02-20 13:58:21 -08001983config FB_SM501
1984 tristate "Silicon Motion SM501 framebuffer support"
1985 depends on FB && MFD_SM501
1986 select FB_CFB_FILLRECT
1987 select FB_CFB_COPYAREA
1988 select FB_CFB_IMAGEBLIT
1989 ---help---
1990 Frame buffer driver for the CRT and LCD controllers in the Silicon
1991 Motion SM501.
1992
1993 This driver is also available as a module ( = code which can be
1994 inserted and removed from the running kernel whenever you want). The
1995 module will be called sm501fb. If you want to compile it as a module,
Dirk Hohndele4031492007-10-30 13:37:19 -07001996 say M here and read <file:Documentation/kbuild/modules.txt>.
Ben Dooks5fc404e2007-02-20 13:58:21 -08001997
1998 If unsure, say N.
1999
2000
Vitaly Wool36c93662006-07-03 00:24:19 -07002001config FB_PNX4008_DUM
2002 tristate "Display Update Module support on Philips PNX4008 board"
2003 depends on FB && ARCH_PNX4008
2004 ---help---
2005 Say Y here to enable support for PNX4008 Display Update Module (DUM)
2006
2007config FB_PNX4008_DUM_RGB
2008 tristate "RGB Framebuffer support on Philips PNX4008 board"
2009 depends on FB_PNX4008_DUM
2010 select FB_CFB_FILLRECT
2011 select FB_CFB_COPYAREA
2012 select FB_CFB_IMAGEBLIT
2013 ---help---
2014 Say Y here to enable support for PNX4008 RGB Framebuffer
2015
Paul Mackerrasa3d89982006-12-10 02:20:42 -08002016config FB_IBM_GXT4500
2017 tristate "Framebuffer support for IBM GXT4500P adaptor"
Randy Dunlap0058f472007-10-16 01:29:35 -07002018 depends on FB && PPC
Paul Mackerrasa3d89982006-12-10 02:20:42 -08002019 select FB_CFB_FILLRECT
2020 select FB_CFB_COPYAREA
2021 select FB_CFB_IMAGEBLIT
2022 ---help---
2023 Say Y here to enable support for the IBM GXT4500P display
2024 adaptor, found on some IBM System P (pSeries) machines.
2025
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08002026config FB_PS3
Geert Uytterhoeven9e6b99b2007-06-16 08:05:38 +10002027 tristate "PS3 GPU framebuffer driver"
2028 depends on FB && PS3_PS3AV
Geert Uytterhoeven92c45792007-05-23 13:57:50 -07002029 select FB_SYS_FILLRECT
2030 select FB_SYS_COPYAREA
2031 select FB_SYS_IMAGEBLIT
2032 select FB_SYS_FOPS
Geert Uytterhoeven23e9c942007-07-21 04:37:49 -07002033 select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08002034 ---help---
2035 Include support for the virtual frame buffer in the PS3 platform.
2036
2037config FB_PS3_DEFAULT_SIZE_M
2038 int "PS3 default frame buffer size (in MiB)"
2039 depends on FB_PS3
Geert Uytterhoeven50b25292007-07-21 04:37:50 -07002040 default 9
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08002041 ---help---
2042 This is the default size (in MiB) of the virtual frame buffer in
2043 the PS3.
2044 The default value can be overridden on the kernel command line
2045 using the "ps3fb" option (e.g. "ps3fb=9M");
2046
Andrei Konovalov147394c2007-05-08 00:40:18 -07002047config FB_XILINX
2048 tristate "Xilinx frame buffer support"
Michal Simek6fa612b2009-05-11 15:49:12 +02002049 depends on FB && (XILINX_VIRTEX || MICROBLAZE)
Andrei Konovalov147394c2007-05-08 00:40:18 -07002050 select FB_CFB_FILLRECT
2051 select FB_CFB_COPYAREA
2052 select FB_CFB_IMAGEBLIT
2053 ---help---
2054 Include support for the Xilinx ML300/ML403 reference design
2055 framebuffer. ML300 carries a 640*480 LCD display on the board,
2056 ML403 uses a standard DB15 VGA connector.
2057
Yoichi Yuasa5abe3b42008-07-23 21:31:40 -07002058config FB_COBALT
2059 tristate "Cobalt server LCD frame buffer support"
2060 depends on FB && MIPS_COBALT
2061
Nobuhiro Iwamatsu4a25e412008-07-23 21:31:46 -07002062config FB_SH7760
Nobuhiro Iwamatsu5c72f302008-11-21 14:35:29 +09002063 bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
2064 depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
2065 || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
2066 select FB_CFB_FILLRECT
2067 select FB_CFB_COPYAREA
2068 select FB_CFB_IMAGEBLIT
2069 ---help---
2070 Support for the SH7760/SH7763/SH7720/SH7721 integrated
2071 (D)STN/TFT LCD Controller.
2072 Supports display resolutions up to 1024x1024 pixel, grayscale and
2073 color operation, with depths ranging from 1 bpp to 8 bpp monochrome
2074 and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
2075 panels <= 320 pixel horizontal resolution.
Nobuhiro Iwamatsu4a25e412008-07-23 21:31:46 -07002076
Sudhakar Rajashekhara4ed824d2009-09-22 16:47:06 -07002077config FB_DA8XX
2078 tristate "DA8xx/OMAP-L1xx Framebuffer support"
2079 depends on FB && ARCH_DAVINCI_DA8XX
2080 select FB_CFB_FILLRECT
2081 select FB_CFB_COPYAREA
2082 select FB_CFB_IMAGEBLIT
2083 ---help---
2084 This is the frame buffer device driver for the TI LCD controller
2085 found on DA8xx/OMAP-L1xx SoCs.
2086 If unsure, say N.
2087
Linus Torvalds1da177e2005-04-16 15:20:36 -07002088config FB_VIRTUAL
2089 tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
2090 depends on FB
Antonino A. Daplas87b48842007-05-08 00:39:01 -07002091 select FB_SYS_FILLRECT
2092 select FB_SYS_COPYAREA
2093 select FB_SYS_IMAGEBLIT
Antonino A. Daplas52102c02007-05-08 00:39:07 -07002094 select FB_SYS_FOPS
Linus Torvalds1da177e2005-04-16 15:20:36 -07002095 ---help---
2096 This is a `virtual' frame buffer device. It operates on a chunk of
2097 unswappable kernel memory instead of on the memory of a graphics
2098 board. This means you cannot see any output sent to this frame
2099 buffer device, while it does consume precious memory. The main use
2100 of this frame buffer device is testing and debugging the frame
2101 buffer subsystem. Do NOT enable it for normal systems! To protect
2102 the innocent, it has to be enabled explicitly at boot time using the
2103 kernel option `video=vfb:'.
2104
2105 To compile this driver as a module, choose M here: the
Mike Frysinger66cf7512006-10-03 01:14:41 -07002106 module will be called vfb. In order to load it, you must use
2107 the vfb_enable=1 option.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002108
2109 If unsure, say N.
James Simmonse0e34ef2007-02-10 14:15:43 +00002110
Markus Armbruster4ee36dc2008-04-02 10:54:07 -07002111config XEN_FBDEV_FRONTEND
2112 tristate "Xen virtual frame buffer support"
2113 depends on FB && XEN
2114 select FB_SYS_FILLRECT
2115 select FB_SYS_COPYAREA
2116 select FB_SYS_IMAGEBLIT
2117 select FB_SYS_FOPS
2118 select FB_DEFERRED_IO
Konrad Rzeszutek Wilkba69ea42009-10-08 13:23:08 -04002119 select XEN_XENBUS_FRONTEND
Markus Armbruster4ee36dc2008-04-02 10:54:07 -07002120 default y
2121 help
2122 This driver implements the front-end of the Xen virtual
2123 frame buffer driver. It communicates with a back-end
2124 in another domain.
2125
Jaya Kumare9355082008-08-19 11:17:55 +01002126config FB_METRONOME
2127 tristate "E-Ink Metronome/8track controller support"
2128 depends on FB
2129 select FB_SYS_FILLRECT
2130 select FB_SYS_COPYAREA
2131 select FB_SYS_IMAGEBLIT
2132 select FB_SYS_FOPS
2133 select FB_DEFERRED_IO
2134 help
2135 This driver implements support for the E-Ink Metronome
2136 controller. The pre-release name for this device was 8track
2137 and could also have been called by some vendors as PVI-nnnn.
2138
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002139config FB_MB862XX
2140 tristate "Fujitsu MB862xx GDC support"
2141 depends on FB
2142 select FB_CFB_FILLRECT
2143 select FB_CFB_COPYAREA
2144 select FB_CFB_IMAGEBLIT
2145 ---help---
2146 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
2147
2148config FB_MB862XX_PCI_GDC
2149 bool "Carmine/Coral-P(A) GDC"
2150 depends on PCI && FB_MB862XX
2151 ---help---
2152 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
2153 PCI graphics controller devices.
2154
2155config FB_MB862XX_LIME
2156 bool "Lime GDC"
2157 depends on FB_MB862XX
2158 depends on OF && !FB_MB862XX_PCI_GDC
Julian Calaby336e7472009-06-16 15:34:29 -07002159 depends on PPC
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002160 select FB_FOREIGN_ENDIAN
2161 select FB_LITTLE_ENDIAN
2162 ---help---
2163 Framebuffer support for Fujitsu Lime GDC on host CPU bus.
2164
Ryan Mallon88017bd2009-09-22 16:47:09 -07002165config FB_EP93XX
2166 tristate "EP93XX frame buffer support"
2167 depends on FB && ARCH_EP93XX
2168 select FB_CFB_FILLRECT
2169 select FB_CFB_COPYAREA
2170 select FB_CFB_IMAGEBLIT
2171 ---help---
2172 Framebuffer driver for the Cirrus Logic EP93XX series of processors.
2173 This driver is also available as a module. The module will be called
2174 ep93xx-fb.
2175
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002176config FB_PRE_INIT_FB
2177 bool "Don't reinitialize, use bootloader's GDC/Display configuration"
Guennadi Liakhovetski93f40e62009-11-11 14:26:47 -08002178 depends on FB && FB_MB862XX_LIME
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002179 ---help---
2180 Select this option if display contents should be inherited as set by
2181 the bootloader.
2182
Pavel Machekd480ace2009-09-22 16:47:03 -07002183config FB_MSM
Pavel Machek4e00dc72009-12-08 11:10:28 -08002184 tristate "MSM Framebuffer support"
Pavel Machekd480ace2009-09-22 16:47:03 -07002185 depends on FB && ARCH_MSM
2186 select FB_CFB_FILLRECT
2187 select FB_CFB_COPYAREA
2188 select FB_CFB_IMAGEBLIT
2189 default y
2190
Guennadi Liakhovetski86528da2009-01-21 10:32:34 -07002191config FB_MX3
Guennadi Liakhovetski6e1588c2009-02-26 21:34:28 +01002192 tristate "MX3 Framebuffer support"
2193 depends on FB && MX3_IPU
2194 select FB_CFB_FILLRECT
2195 select FB_CFB_COPYAREA
2196 select FB_CFB_IMAGEBLIT
2197 default y
2198 help
2199 This is a framebuffer device for the i.MX31 LCD Controller. So
2200 far only synchronous displays are supported. If you plan to use
2201 an LCD display with your i.MX31 system, say Y here.
Guennadi Liakhovetski86528da2009-01-21 10:32:34 -07002202
Jaya Kumar0d4ff4d2009-01-01 17:49:19 +01002203config FB_BROADSHEET
2204 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
2205 depends on FB
2206 select FB_SYS_FILLRECT
2207 select FB_SYS_COPYAREA
2208 select FB_SYS_IMAGEBLIT
2209 select FB_SYS_FOPS
2210 select FB_DEFERRED_IO
2211 help
2212 This driver implements support for the E-Ink Broadsheet
2213 controller. The release name for this device was Epson S1D13521
2214 and could also have been called by other names when coupled with
2215 a bridge adapter.
2216
Randy Dunlapf08f3892007-10-29 14:37:16 -07002217source "drivers/video/omap/Kconfig"
Tomi Valkeinenafedec12009-08-07 12:01:55 +03002218source "drivers/video/omap2/Kconfig"
Randy Dunlap0058f472007-10-16 01:29:35 -07002219
Randy Dunlap179b0252007-10-16 01:29:39 -07002220source "drivers/video/backlight/Kconfig"
2221source "drivers/video/display/Kconfig"
2222
Linus Torvalds1da177e2005-04-16 15:20:36 -07002223if VT
2224 source "drivers/video/console/Kconfig"
2225endif
2226
2227if FB || SGI_NEWPORT_CONSOLE
2228 source "drivers/video/logo/Kconfig"
2229endif
2230
Linus Torvalds1da177e2005-04-16 15:20:36 -07002231endmenu