arch/arm64/boot/dts/qcom/msm8953.dtsi

/*
 * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include "skeleton64.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/regulator/qcom,rpm-smd-regulator.h>
#include <dt-bindings/clock/msm-clocks-8953.h>

/ {
	model = "Qualcomm Technologies, Inc. MSM 8953";
	compatible = "qcom,msm8953";
	qcom,msm-id = <293 0x0>;
	interrupt-parent = <&intc>;

	chosen {
		bootargs = "sched_enable_hmp=1 sched_enable_power_aware=1";
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		other_ext_mem: other_ext_region@0 {
			compatible = "removed-dma-pool";
			no-map;
			reg = <0x0 0x85b00000 0x0 0xd00000>;
		};

		modem_mem: modem_region@0 {
			compatible = "removed-dma-pool";
			no-map-fixup;
			reg = <0x0 0x86c00000 0x0 0x6a00000>;
		};

		adsp_fw_mem: adsp_fw_region@0 {
			compatible = "removed-dma-pool";
			no-map;
			reg = <0x0 0x8d600000 0x0 0x1100000>;
		};

		wcnss_fw_mem: wcnss_fw_region@0 {
			compatible = "removed-dma-pool";
			no-map;
			reg = <0x0 0x8e700000 0x0 0x700000>;
		};

		venus_mem: venus_region@0 {
			compatible = "shared-dma-pool";
			reusable;
			alloc-ranges = <0x0 0x80000000 0x0 0x10000000>;
			alignment = <0 0x400000>;
			size = <0 0x0800000>;
		};

		secure_mem: secure_region@0 {
			compatible = "shared-dma-pool";
			reusable;
			alignment = <0 0x400000>;
			size = <0 0x09800000>;
		};

		qseecom_mem: qseecom_region@0 {
			compatible = "shared-dma-pool";
			reusable;
			alignment = <0 0x400000>;
			size = <0 0x1000000>;
		};

		adsp_mem: adsp_region@0 {
			compatible = "shared-dma-pool";
			reusable;
			size = <0 0x400000>;
		};

		dfps_data_mem: dfps_data_mem@90000000 {
		       reg = <0 0x90000000 0 0x1000>;
		       label = "dfps_data_mem";
		};

		cont_splash_mem: splash_region@0x90001000 {
			reg = <0x0 0x90001000 0x0 0x13ff000>;
			label = "cont_splash_mem";
		};

		gpu_mem: gpu_region@0 {
			compatible = "shared-dma-pool";
			reusable;
			alloc-ranges = <0x0 0x80000000 0x0 0x10000000>;
			alignment = <0 0x400000>;
			size = <0 0x800000>;
		};
	};

	aliases {
		/* smdtty devices */
		smd1 = &smdtty_apps_fm;
		smd2 = &smdtty_apps_riva_bt_acl;
		smd3 = &smdtty_apps_riva_bt_cmd;
		smd4 = &smdtty_mbalbridge;
		smd5 = &smdtty_apps_riva_ant_cmd;
		smd6 = &smdtty_apps_riva_ant_data;
		smd7 = &smdtty_data1;
		smd8 = &smdtty_data4;
		smd11 = &smdtty_data11;
		smd21 = &smdtty_data21;
		smd36 = &smdtty_loopback;
		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
		sdhc2 = &sdhc_2; /* SDC2 for SD card */
	};

	soc: soc { };

};

#include "msm8953-pinctrl.dtsi"
#include "msm8953-cpu.dtsi"
#include "msm8953-pm.dtsi"
#include "msm8953-bus.dtsi"


&soc {
	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0 0 0 0xffffffff>;
	compatible = "simple-bus";

	apc_apm: apm@b111000 {
		compatible = "qcom,msm8953-apm";
		reg = <0xb111000 0x1000>;
		reg-names = "pm-apcc-glb";
		qcom,apm-post-halt-delay = <0x2>;
		qcom,apm-halt-clk-delay = <0x11>;
		qcom,apm-resume-clk-delay = <0x10>;
		qcom,apm-sel-switch-delay = <0x01>;
	};

	intc: interrupt-controller@b000000 {
		compatible = "qcom,msm-qgic2";
		interrupt-controller;
		#interrupt-cells = <3>;
		reg = <0x0b000000 0x1000>,
		      <0x0b002000 0x1000>;
	};

	qcom,msm-gladiator@b1c0000 {
		compatible = "qcom,msm-gladiator";
		reg = <0x0b1c0000 0x4000>;
		reg-names = "gladiator_base";
		interrupts = <0 22 0>;
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <1 2 0xff08>,
			     <1 3 0xff08>,
			     <1 4 0xff08>,
			     <1 1 0xff08>;
		clock-frequency = <19200000>;
	};

	timer@b120000 {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		compatible = "arm,armv7-timer-mem";
		reg = <0xb120000 0x1000>;
		clock-frequency = <19200000>;

		frame@b121000 {
			frame-number = <0>;
			interrupts = <0 8 0x4>,
				     <0 7 0x4>;
			reg = <0xb121000 0x1000>,
			      <0xb122000 0x1000>;
		};

		frame@b123000 {
			frame-number = <1>;
			interrupts = <0 9 0x4>;
			reg = <0xb123000 0x1000>;
			status = "disabled";
		};

		frame@b124000 {
			frame-number = <2>;
			interrupts = <0 10 0x4>;
			reg = <0xb124000 0x1000>;
			status = "disabled";
		};

		frame@b125000 {
			frame-number = <3>;
			interrupts = <0 11 0x4>;
			reg = <0xb125000 0x1000>;
			status = "disabled";
		};

		frame@b126000 {
			frame-number = <4>;
			interrupts = <0 12 0x4>;
			reg = <0xb126000 0x1000>;
			status = "disabled";
		};

		frame@b127000 {
			frame-number = <5>;
			interrupts = <0 13 0x4>;
			reg = <0xb127000 0x1000>;
			status = "disabled";
		};

		frame@b128000 {
			frame-number = <6>;
			interrupts = <0 14 0x4>;
			reg = <0xb128000 0x1000>;
			status = "disabled";
		};
	};
	qcom,rmtfs_sharedmem@00000000 {
		compatible = "qcom,sharedmem-uio";
		reg = <0x00000000 0x00180000>;
		reg-names = "rmtfs";
		qcom,client-id = <0x00000001>;
	};

	restart@4ab000 {
		compatible = "qcom,pshold";
		reg = <0x4ab000 0x4>,
			<0x193d100 0x4>;
		reg-names = "pshold-base", "tcsr-boot-misc-detect";
	};

	qcom,mpm2-sleep-counter@4a3000 {
		compatible = "qcom,mpm2-sleep-counter";
		reg = <0x4a3000 0x1000>;
		clock-frequency = <32768>;
	};

	cpu-pmu {
		compatible = "arm,armv8-pmuv3";
		interrupts = <1 7 0xff00>;
	};

	qcom,sps {
		compatible = "qcom,msm_sps_4k";
		qcom,pipe-attr-ee;
	};

	thermal_zones: thermal-zones {
		mdm-core-usr {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-governor = "user_space";
			thermal-sensors = <&tsens0 1>;
			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		qdsp-usr {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-governor = "user_space";
			thermal-sensors = <&tsens0 2>;
			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		camera-usr {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-governor = "user_space";
			thermal-sensors = <&tsens0 3>;
			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		apc1_cpu0-usr {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-sensors = <&tsens0 4>;
			thermal-governor = "user_space";
			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		apc1_cpu1-usr {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-sensors = <&tsens0 5>;
			thermal-governor = "user_space";
			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		apc1_cpu2-usr {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-sensors = <&tsens0 6>;
			thermal-governor = "user_space";
			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		apc1_cpu3-usr {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-sensors = <&tsens0 7>;
			thermal-governor = "user_space";
			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		apc1_l2-usr {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-sensors = <&tsens0 8>;
			thermal-governor = "user_space";
			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		apc0_cpu0-usr {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-sensors = <&tsens0 9>;
			thermal-governor = "user_space";
			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		apc0_cpu1-usr {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-sensors = <&tsens0 10>;
			thermal-governor = "user_space";
			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		apc0_cpu2-usr {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-sensors = <&tsens0 11>;
			thermal-governor = "user_space";
			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		apc0_cpu3-usr {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-sensors = <&tsens0 12>;
			thermal-governor = "user_space";
			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		apc0_l2-usr {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-sensors = <&tsens0 13>;
			thermal-governor = "user_space";
			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		gpu0-usr {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-sensors = <&tsens0 14>;
			thermal-governor = "user_space";
			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};

		gpu1-usr {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-sensors = <&tsens0 15>;
			thermal-governor = "user_space";
			trips {
				active-config0 {
					temperature = <125000>;
					hysteresis = <1000>;
					type = "passive";
				};
			};
		};
	};

	tsens0: tsens@4a8000 {
		compatible = "qcom,msm8953-tsens";
		reg = <0x4a8000 0x1000>,
			<0x4a9000 0x1000>;
		reg-names = "tsens_srot_physical",
					"tsens_tm_physical";
		interrupts = <0 184 0>, <0 314 0>;
		interrupt-names = "tsens-upper-lower", "tsens-critical";
		#thermal-sensor-cells = <1>;
	};

	qcom_seecom: qseecom@85b00000 {
		compatible = "qcom,qseecom";
		reg = <0x85b00000 0x800000>;
		reg-names = "secapp-region";
		qcom,hlos-num-ce-hw-instances = <1>;
		qcom,hlos-ce-hw-instance = <0>;
		qcom,qsee-ce-hw-instance = <0>;
		qcom,disk-encrypt-pipe-pair = <2>;
		qcom,support-fde;
		qcom,msm-bus,name = "qseecom-noc";
		qcom,msm-bus,num-cases = <4>;
		qcom,msm-bus,num-paths = <1>;
		qcom,support-bus-scaling;
		qcom,msm-bus,vectors-KBps =
			<55 512 0 0>,
			<55 512 0 0>,
			<55 512 120000 1200000>,
			<55 512 393600 3936000>;
		clocks = <&clock_gcc clk_crypto_clk_src>,
			 <&clock_gcc clk_gcc_crypto_clk>,
			 <&clock_gcc clk_gcc_crypto_ahb_clk>,
			 <&clock_gcc clk_gcc_crypto_axi_clk>;
		clock-names = "core_clk_src", "core_clk",
				"iface_clk", "bus_clk";
		qcom,ce-opp-freq = <100000000>;
		status = "disabled";
	};

	blsp1_uart0: serial@78af000 {
		compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
		reg = <0x78af000 0x200>;
		interrupts = <0 107 0>;
		clocks = <&clock_gcc clk_gcc_blsp1_uart1_apps_clk>,
			<&clock_gcc clk_gcc_blsp1_ahb_clk>;
		clock-names = "core", "iface";
		status = "disabled";
	};

	dma_blsp1: qcom,sps-dma@7884000 { /* BLSP1 */
		#dma-cells = <4>;
		compatible = "qcom,sps-dma";
		reg = <0x7884000 0x1f000>;
		interrupts = <0 238 0>;
		qcom,summing-threshold = <10>;
	};

	dma_blsp2: qcom,sps-dma@7ac4000 { /* BLSP2 */
		#dma-cells = <4>;
		compatible = "qcom,sps-dma";
		reg = <0x7ac4000 0x1f000>;
		interrupts = <0 239 0>;
		qcom,summing-threshold = <10>;
	};

	slim_msm: slim@c140000{
		cell-index = <1>;
		compatible = "qcom,slim-ngd";
		reg = <0xc140000 0x2c000>,
		      <0xc104000 0x2a000>;
		reg-names = "slimbus_physical", "slimbus_bam_physical";
		interrupts = <0 163 0>, <0 180 0>;
		interrupt-names = "slimbus_irq", "slimbus_bam_irq";
		qcom,apps-ch-pipes = <0x600000>;
		qcom,ea-pc = <0x200>;
		status = "disabled";
	};

	clock_gcc: qcom,gcc@1800000 {
		compatible = "qcom,gcc-8953";
		reg = <0x1800000 0x80000>,
			 <0x00a4124 0x08>;
		reg-names = "cc_base", "efuse";
		vdd_dig-supply = <&pm8953_s2_level>;
		#clock-cells = <1>;
		#reset-cells = <1>;
	};

	clock_debug: qcom,cc-debug@1874000 {
		compatible = "qcom,cc-debug-8953";
		reg = <0x1874000 0x4>;
		reg-names = "cc_base";
		clocks = <&clock_cpu clk_cpu_debug_pri_mux>;
		clock-names = "debug_cpu_clk";
		#clock-cells = <1>;
	};

	clock_gcc_gfx: qcom,gcc-gfx@1800000 {
		compatible = "qcom,gcc-gfx-8953";
		reg = <0x1800000 0x80000>;
		reg-names = "cc_base";
		vdd_gfx-supply = <&gfx_vreg_corner>;
		qcom,gfxfreq-corner =
			 <         0   0 >,
			 < 133330000   1 >,  /* Min SVS   */
			 < 216000000   2 >,  /* Low SVS   */
			 < 320000000   3 >,  /* SVS       */
			 < 400000000   4 >,  /* SVS Plus  */
			 < 510000000   5 >,  /* NOM       */
			 < 560000000   6 >,  /* Nom Plus  */
			 < 650000000   7 >;  /* Turbo     */
		#clock-cells = <1>;
	};

	clock_cpu: qcom,cpu-clock-8953@b116000 {
		compatible = "qcom,cpu-clock-8953";
		reg =	 <0xb114000  0x68>,
			 <0xb014000  0x68>,
			 <0xb116000  0x400>,
			 <0xb111050  0x08>,
			 <0xb011050  0x08>,
			 <0xb1d1050  0x08>,
			 <0x00a4124  0x08>;
		reg-names = "rcgwr-c0-base", "rcgwr-c1-base",
				"c0-pll", "c0-mux", "c1-mux",
				"cci-mux", "efuse";
		vdd-mx-supply = <&pm8953_s7_level_ao>;
		vdd-cl-supply = <&apc_vreg>;
		clocks = <&clock_gcc clk_xo_a_clk_src>;
		clock-names = "xo_a";
		qcom,num-clusters = <2>;
		qcom,speed0-bin-v0-cl =
			<          0 0>,
			<  652800000 1>,
			< 1036800000 2>,
			< 1401600000 3>,
			< 1689600000 4>,
			< 1804800000 5>,
			< 1958400000 6>,
			< 2016000000 7>;
		qcom,speed0-bin-v0-cci =
			<          0 0>,
			<  261120000 1>,
			<  414720000 2>,
			<  560640000 3>,
			<  675840000 4>,
			<  721920000 5>,
			<  783360000 6>,
			<  806400000 7>;
		qcom,speed2-bin-v0-cl =
			<          0 0>,
			<  652800000 1>,
			< 1036800000 2>,
			< 1401600000 3>,
			< 1689600000 4>,
			< 1804800000 5>,
			< 1958400000 6>,
			< 2016000000 7>;
		qcom,speed2-bin-v0-cci =
			<          0 0>,
			<  261120000 1>,
			<  414720000 2>,
			<  560640000 3>,
			<  675840000 4>,
			<  721920000 5>,
			<  783360000 6>,
			<  806400000 7>;
		qcom,speed7-bin-v0-cl =
			<          0 0>,
			<  652800000 1>,
			< 1036800000 2>,
			< 1401600000 3>,
			< 1689600000 4>,
			< 1804800000 5>,
			< 1958400000 6>,
			< 2016000000 7>,
			< 2150400000 8>,
			< 2208000000 9>;
		qcom,speed7-bin-v0-cci =
			<          0 0>,
			<  261120000 1>,
			<  414720000 2>,
			<  560640000 3>,
			<  675840000 4>,
			<  721920000 5>,
			<  783360000 6>,
			<  806400000 7>,
			<  860160000 8>,
			<  883200000 9>;
		qcom,speed6-bin-v0-cl =
			<          0 0>,
			<  652800000 1>,
			< 1036800000 2>,
			< 1401600000 3>,
			< 1689600000 4>,
			< 1804800000 5>;
		qcom,speed6-bin-v0-cci =
			<          0 0>,
			<  261120000 1>,
			<  414720000 2>,
			<  560640000 3>,
			<  675840000 4>,
			<  721920000 5>;
		#clock-cells = <1>;
	 };

	msm_cpufreq: qcom,msm-cpufreq {
		compatible = "qcom,msm-cpufreq";
		clock-names = "l2_clk", "cpu0_clk", "cpu1_clk", "cpu2_clk",
				"cpu3_clk", "cpu4_clk", "cpu5_clk",
				"cpu6_clk", "cpu7_clk";
		clocks = <&clock_cpu clk_cci_clk>,
			 <&clock_cpu clk_a53_pwr_clk>,
			 <&clock_cpu clk_a53_pwr_clk>,
			 <&clock_cpu clk_a53_pwr_clk>,
			 <&clock_cpu clk_a53_pwr_clk>,
			 <&clock_cpu clk_a53_pwr_clk>,
			 <&clock_cpu clk_a53_pwr_clk>,
			 <&clock_cpu clk_a53_pwr_clk>,
			 <&clock_cpu clk_a53_pwr_clk>;

		qcom,cpufreq-table =
			 <  652800 >,
			 < 1036800 >,
			 < 1401600 >,
			 < 1689600 >,
			 < 1804800 >,
			 < 1958400 >,
			 < 2016000 >,
			 < 2150400 >,
			 < 2208000 >;
	};

	cpubw: qcom,cpubw {
		compatible = "qcom,devbw";
		governor = "cpufreq";
		qcom,src-dst-ports = <1 512>;
		qcom,active-only;
		qcom,bw-tbl =
			<   769 /*  100.8 MHz */ >,
			<  1611 /*  211.2 MHz */ >,     /*Low SVS*/
			<  2124 /*  278.4 MHz */ >,
			<  2929 /*  384   MHz */ >,
			<  3221 /*  422.4 MHz */ >,	/* SVS */
			<  4248 /*  556.8 MHz */ >,
			<  5126 /*  672   MHz */ >,
			<  5859 /*  768   MHz */ >,     /* SVS+  */
			<  6152 /*  806.4 MHz */ >,
			<  6445 /*  844.8 MHz */ >,     /* NOM   */
			<  7104 /*  931.2 MHz */ >;     /* TURBO */
	};

	mincpubw: qcom,mincpubw {
		compatible = "qcom,devbw";
		governor = "cpufreq";
		qcom,src-dst-ports = <1 512>;
		qcom,active-only;
		qcom,bw-tbl =
			<   769 /*  100.8 MHz */ >,
			<  1611 /*  211.2 MHz */ >,     /*Low SVS*/
			<  2124 /*  278.4 MHz */ >,
			<  2929 /*  384   MHz */ >,
			<  3221 /*  422.4 MHz */ >,	/* SVS */
			<  4248 /*  556.8 MHz */ >,
			<  5126 /*  672   MHz */ >,
			<  5859 /*  768   MHz */ >,     /* SVS+  */
			<  6152 /*  806.4 MHz */ >,
			<  6445 /*  844.8 MHz */ >,     /* NOM   */
			<  7104 /*  931.2 MHz */ >;     /* TURBO */
	};

	qcom,cpu-bwmon {
		compatible = "qcom,bimc-bwmon2";
		reg = <0x408000 0x300>, <0x401000 0x200>;
		reg-names = "base", "global_base";
		interrupts = <0 183 4>;
		qcom,mport = <0>;
		qcom,target-dev = <&cpubw>;
	};

	devfreq-cpufreq {
		cpubw-cpufreq {
		target-dev = <&cpubw>;
		cpu-to-dev-map =
			 <  652800  1611>,
			 < 1036800  3221>,
			 < 1401600  5859>,
			 < 1689600  6445>,
			 < 1804800  7104>,
			 < 1958400  7104>,
			 < 2208000  7104>;
		};

		mincpubw-cpufreq {
			target-dev = <&mincpubw>;
			cpu-to-dev-map =
				<  652800 1611 >,
				< 1401600 3221 >,
				< 2208000 5859 >;
		};
	};

	cpubw_compute: qcom,cpubw-compute {
		compatible = "qcom,arm-cpu-mon";
		qcom,cpulist = < &CPU0 &CPU1 &CPU2 &CPU3
				&CPU4 &CPU5 &CPU6 &CPU7 >;
		qcom,target-dev = <&cpubw>;
		qcom,core-dev-table =
				 <  652800  1611>,
				 < 1036800  3221>,
				 < 1401600  5859>,
				 < 1689600  6445>,
				 < 1804800  7104>,
				 < 1958400  7104>,
				 < 2208000  7104>;
	};

	mincpubw_compute: qcom,mincpubw-compute {
		compatible = "qcom,arm-cpu-mon";
		qcom,cpulist = < &CPU0 &CPU1 &CPU2 &CPU3
				&CPU4 &CPU5 &CPU6 &CPU7 >;
		qcom,target-dev = <&mincpubw>;
		qcom,core-dev-table =
				<  652800 1611 >,
				< 1401600 3221 >,
				< 2208000 5859 >;
	};

	qcom,ipc-spinlock@1905000 {
		compatible = "qcom,ipc-spinlock-sfpb";
		reg = <0x1905000 0x8000>;
		qcom,num-locks = <8>;
	};

	qcom,smem@86300000 {
		compatible = "qcom,smem";
		reg = <0x86300000 0x100000>,
			<0x0b011008 0x4>,
			<0x60000 0x8000>,
			<0x193d000 0x8>;
		reg-names = "smem", "irq-reg-base",
				"aux-mem1", "smem_targ_info_reg";
		qcom,mpu-enabled;

		qcom,smd-modem {
			compatible = "qcom,smd";
			qcom,smd-edge = <0>;
			qcom,smd-irq-offset = <0x0>;
			qcom,smd-irq-bitmask = <0x1000>;
			interrupts = <0 25 1>;
			label = "modem";
			qcom,not-loadable;
		};

		qcom,smsm-modem {
			compatible = "qcom,smsm";
			qcom,smsm-edge = <0>;
			qcom,smsm-irq-offset = <0x0>;
			qcom,smsm-irq-bitmask = <0x2000>;
			interrupts = <0 26 1>;
		};

		qcom,smd-wcnss {
			compatible = "qcom,smd";
			qcom,smd-edge = <6>;
			qcom,smd-irq-offset = <0x0>;
			qcom,smd-irq-bitmask = <0x20000>;
			interrupts = <0 142 1>;
			label = "wcnss";
		};

		qcom,smsm-wcnss {
			compatible = "qcom,smsm";
			qcom,smsm-edge = <6>;
			qcom,smsm-irq-offset = <0x0>;
			qcom,smsm-irq-bitmask = <0x80000>;
			interrupts = <0 144 1>;
		};

		qcom,smd-adsp {
			compatible = "qcom,smd";
			qcom,smd-edge = <1>;
			qcom,smd-irq-offset = <0x0>;
			qcom,smd-irq-bitmask = <0x100>;
			interrupts = <0 289 1>;
			label = "adsp";
		};

		qcom,smsm-adsp {
			compatible = "qcom,smsm";
			qcom,smsm-edge = <1>;
			qcom,smsm-irq-offset = <0x0>;
			qcom,smsm-irq-bitmask = <0x200>;
			interrupts = <0 290 1>;
		};

		qcom,smd-rpm {
			compatible = "qcom,smd";
			qcom,smd-edge = <15>;
			qcom,smd-irq-offset = <0x0>;
			qcom,smd-irq-bitmask = <0x1>;
			interrupts = <0 168 1>;
			label = "rpm";
			qcom,irq-no-suspend;
			qcom,not-loadable;
		};
	};

	qcom,smdtty {
		compatible = "qcom,smdtty";

		smdtty_apps_fm: qcom,smdtty-apps-fm {
			qcom,smdtty-remote = "wcnss";
			qcom,smdtty-port-name = "APPS_FM";
		};

		smdtty_apps_riva_bt_acl: smdtty-apps-riva-bt-acl {
			qcom,smdtty-remote = "wcnss";
			qcom,smdtty-port-name = "APPS_RIVA_BT_ACL";
		};

		smdtty_apps_riva_bt_cmd: qcom,smdtty-apps-riva-bt-cmd {
			qcom,smdtty-remote = "wcnss";
			qcom,smdtty-port-name = "APPS_RIVA_BT_CMD";
		};

		smdtty_mbalbridge: qcom,smdtty-mbalbridge {
			qcom,smdtty-remote = "modem";
			qcom,smdtty-port-name = "MBALBRIDGE";
		};

		smdtty_apps_riva_ant_cmd: smdtty-apps-riva-ant-cmd {
			qcom,smdtty-remote = "wcnss";
			qcom,smdtty-port-name = "APPS_RIVA_ANT_CMD";
		};

		smdtty_apps_riva_ant_data: smdtty-apps-riva-ant-data {
			qcom,smdtty-remote = "wcnss";
			qcom,smdtty-port-name = "APPS_RIVA_ANT_DATA";
		};

		smdtty_data1: qcom,smdtty-data1 {
			qcom,smdtty-remote = "modem";
			qcom,smdtty-port-name = "DATA1";
		};

		smdtty_data4: qcom,smdtty-data4 {
			qcom,smdtty-remote = "modem";
			qcom,smdtty-port-name = "DATA4";
		};

		smdtty_data11: qcom,smdtty-data11 {
			qcom,smdtty-remote = "modem";
			qcom,smdtty-port-name = "DATA11";
		};

		smdtty_data21: qcom,smdtty-data21 {
			qcom,smdtty-remote = "modem";
			qcom,smdtty-port-name = "DATA21";
		};

		smdtty_loopback: smdtty-loopback {
			qcom,smdtty-remote = "modem";
			qcom,smdtty-port-name = "LOOPBACK";
			qcom,smdtty-dev-name = "LOOPBACK_TTY";
		};
	};

	qcom,smdpkt {
		compatible = "qcom,smdpkt";

		qcom,smdpkt-data5-cntl {
			qcom,smdpkt-remote = "modem";
			qcom,smdpkt-port-name = "DATA5_CNTL";
			qcom,smdpkt-dev-name = "smdcntl0";
		};

		qcom,smdpkt-data22 {
			qcom,smdpkt-remote = "modem";
			qcom,smdpkt-port-name = "DATA22";
			qcom,smdpkt-dev-name = "smd22";
		};

		qcom,smdpkt-data40-cntl {
			qcom,smdpkt-remote = "modem";
			qcom,smdpkt-port-name = "DATA40_CNTL";
			qcom,smdpkt-dev-name = "smdcntl8";
		};

		qcom,smdpkt-apr-apps2 {
			qcom,smdpkt-remote = "adsp";
			qcom,smdpkt-port-name = "apr_apps2";
			qcom,smdpkt-dev-name = "apr_apps2";
		};

		qcom,smdpkt-loopback {
			qcom,smdpkt-remote = "modem";
			qcom,smdpkt-port-name = "LOOPBACK";
			qcom,smdpkt-dev-name = "smd_pkt_loopback";
		};
	};

	rpm_bus: qcom,rpm-smd {
		compatible = "qcom,rpm-smd";
		rpm-channel-name = "rpm_requests";
		rpm-channel-type = <15>; /* SMD_APPS_RPM */
		};

	qcom,wdt@b017000 {
		compatible = "qcom,msm-watchdog";
		reg = <0xb017000 0x1000>;
		reg-names = "wdt-base";
		interrupts = <0 3 0>, <0 4 0>;
		qcom,bark-time = <11000>;
		qcom,pet-time = <10000>;
		qcom,ipi-ping;
		qcom,wakeup-enable;
	};

	qcom,chd {
		compatible = "qcom,core-hang-detect";
		qcom,threshold-arr = <0xb1880b0 0xb1980b0 0xb1a80b0
			0xb1b80b0 0xb0880b0 0xb0980b0 0xb0a80b0 0xb0b80b0>;
		qcom,config-arr = <0xb1880b8 0xb1980b8 0xb1a80b8
			0xb1b80b8 0xb0880b8 0xb0980b8 0xb0a80b8 0xb0b80b8>;
	};

	qcom,msm-rtb {
		compatible = "qcom,msm-rtb";
		qcom,rtb-size = <0x100000>;
	};

	qcom,msm-imem@8600000 {
		compatible = "qcom,msm-imem";
		reg = <0x08600000 0x1000>;
		ranges = <0x0 0x08600000 0x1000>;
		#address-cells = <1>;
		#size-cells = <1>;

		mem_dump_table@10 {
			compatible = "qcom,msm-imem-mem_dump_table";
			reg = <0x10 8>;
		};

		dload_type@18 {
			compatible = "qcom,msm-imem-dload-type";
			reg = <0x18 4>;
		};

		restart_reason@65c {
			compatible = "qcom,msm-imem-restart_reason";
			reg = <0x65c 4>;
		};

		boot_stats@6b0 {
			compatible = "qcom,msm-imem-boot_stats";
			reg = <0x6b0 32>;
		};

		kaslr_offset@6d0 {
			compatible = "qcom,msm-imem-kaslr_offset";
			reg = <0x6d0 12>;
		};

		pil@94c {
			compatible = "qcom,msm-imem-pil";
			reg = <0x94c 200>;

		};
	};

	qcom,memshare {
		compatible = "qcom,memshare";

		qcom,client_1 {
			compatible = "qcom,memshare-peripheral";
			qcom,peripheral-size = <0x200000>;
			qcom,client-id = <0>;
			qcom,allocate-boot-time;
			label = "modem";
		};

		qcom,client_2 {
			compatible = "qcom,memshare-peripheral";
			qcom,peripheral-size = <0x300000>;
			qcom,client-id = <2>;
			label = "modem";
		};

		mem_client_3_size: qcom,client_3 {
			compatible = "qcom,memshare-peripheral";
			qcom,peripheral-size = <0x0>;
			qcom,client-id = <1>;
			label = "modem";
		};
	};
		sdcc1_ice: sdcc1ice@7803000 {
		compatible = "qcom,ice";
		reg = <0x7803000 0x8000>;
		interrupt-names = "sdcc_ice_nonsec_level_irq",
				  "sdcc_ice_sec_level_irq";
		interrupts = <0 312 0>, <0 313 0>;
		qcom,enable-ice-clk;
		clock-names = "ice_core_clk_src", "ice_core_clk",
				"bus_clk", "iface_clk";
		clocks = <&clock_gcc clk_sdcc1_ice_core_clk_src>,
			 <&clock_gcc clk_gcc_sdcc1_ice_core_clk>,
			 <&clock_gcc clk_gcc_sdcc1_apps_clk>,
			 <&clock_gcc clk_gcc_sdcc1_ahb_clk>;
		qcom,op-freq-hz = <270000000>, <0>, <0>, <0>;
		qcom,msm-bus,name = "sdcc_ice_noc";
		qcom,msm-bus,num-cases = <2>;
		qcom,msm-bus,num-paths = <1>;
		qcom,msm-bus,vectors-KBps =
			<78 512 0 0>,    /* No vote */
			<78 512 1000 0>; /* Max. bandwidth */
		qcom,bus-vector-names = "MIN", "MAX";
		qcom,instance-type = "sdcc";
	};

	sdhc_1: sdhci@7824900 {
		compatible = "qcom,sdhci-msm";
		reg = <0x7824900 0x500>, <0x7824000 0x800>, <0x7824e00 0x200>;
		reg-names = "hc_mem", "core_mem", "cmdq_mem";

		interrupts = <0 123 0>, <0 138 0>;
		interrupt-names = "hc_irq", "pwr_irq";

		sdhc-msm-crypto = <&sdcc1_ice>;
		qcom,bus-width = <8>;

		qcom,devfreq,freq-table = <50000000 200000000>;

		qcom,pm-qos-irq-type = "affine_irq";
		qcom,pm-qos-irq-latency = <2 213>;

		qcom,pm-qos-cpu-groups = <0x0f 0xf0>;
		qcom,pm-qos-cmdq-latency-us = <2 213>, <2 213>;

		qcom,pm-qos-legacy-latency-us = <2 213>, <2 213>;

		qcom,msm-bus,name = "sdhc1";
		qcom,msm-bus,num-cases = <9>;
		qcom,msm-bus,num-paths = <1>;
		qcom,msm-bus,vectors-KBps = <78 512 0 0>, /* No vote */
			<78 512 1046 3200>,    /* 400 KB/s*/
			<78 512 52286 160000>, /* 20 MB/s */
			<78 512 65360 200000>, /* 25 MB/s */
			<78 512 130718 400000>, /* 50 MB/s */
			<78 512 130718 400000>, /* 100 MB/s */
			<78 512 261438 800000>, /* 200 MB/s */
			<78 512 261438 800000>, /* 400 MB/s */
			<78 512 1338562 4096000>; /* Max. bandwidth */
		qcom,bus-bw-vectors-bps = <0 400000 20000000 25000000 50000000
			100000000 200000000 400000000 4294967295>;

		clocks = <&clock_gcc clk_gcc_sdcc1_ahb_clk>,
			 <&clock_gcc clk_gcc_sdcc1_apps_clk>,
			 <&clock_gcc clk_gcc_sdcc1_ice_core_clk>;
		clock-names = "iface_clk", "core_clk", "ice_core_clk";
		qcom,ice-clk-rates = <270000000 160000000>;
		qcom,large-address-bus;

		status = "disabled";
	};

	sdhc_2: sdhci@7864900 {
		compatible = "qcom,sdhci-msm";
		reg = <0x7864900 0x500>, <0x7864000 0x800>;
		reg-names = "hc_mem", "core_mem";

		interrupts = <0 125 0>, <0 221 0>;
		interrupt-names = "hc_irq", "pwr_irq";

		qcom,bus-width = <4>;

		qcom,pm-qos-irq-type = "affine_irq";
		qcom,pm-qos-irq-latency = <2 213>;

		qcom,pm-qos-cpu-groups = <0x0f 0xf0>;
		qcom,pm-qos-legacy-latency-us = <2 213>, <2 213>;

		qcom,devfreq,freq-table = <50000000 200000000>;

		qcom,msm-bus,name = "sdhc2";
		qcom,msm-bus,num-cases = <8>;
		qcom,msm-bus,num-paths = <1>;
		qcom,msm-bus,vectors-KBps = <81 512 0 0>, /* No vote */
			<81 512 1046 3200>,    /* 400 KB/s*/
			<81 512 52286 160000>, /* 20 MB/s */
			<81 512 65360 200000>, /* 25 MB/s */
			<81 512 130718 400000>, /* 50 MB/s */
			<81 512 261438 800000>, /* 100 MB/s */
			<81 512 261438 800000>, /* 200 MB/s */
			<81 512 1338562 4096000>; /* Max. bandwidth */
		qcom,bus-bw-vectors-bps = <0 400000 20000000 25000000 50000000
			100000000 200000000 4294967295>;

		clocks = <&clock_gcc clk_gcc_sdcc2_ahb_clk>,
			<&clock_gcc clk_gcc_sdcc2_apps_clk>;
		clock-names = "iface_clk", "core_clk";

		qcom,large-address-bus;
		status = "disabled";
	};

	spmi_bus: qcom,spmi@200f000 {
		compatible = "qcom,spmi-pmic-arb";
		reg = <0x200f000 0x1000>,
			<0x2400000 0x800000>,
			<0x2c00000 0x800000>,
			<0x3800000 0x200000>,
			<0x200a000 0x2100>;
		reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
		interrupt-names = "periph_irq";
		interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
		qcom,ee = <0>;
		qcom,channel = <0>;
		#address-cells = <2>;
		#size-cells = <0>;
		interrupt-controller;
		#interrupt-cells = <4>;
		cell-index = <0>;
	};

	usb3: ssusb@7000000{
		compatible = "qcom,dwc-usb3-msm";
		reg = <0x07000000 0xfc000>,
			<0x0007e000 0x400>;
		reg-names = "core_base",
			"ahb2phy_base";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		interrupts = <0 136 0>, <0 220 0>, <0 134 0>;
		interrupt-names = "hs_phy_irq", "ss_phy_irq", "pwr_event_irq";

		USB3_GDSC-supply = <&gdsc_usb30>;
		qcom,usb-dbm = <&dbm_1p5>;
		qcom,msm-bus,name = "usb3";
		qcom,msm-bus,num-cases = <3>;
		qcom,msm-bus,num-paths = <1>;
		qcom,msm-bus,vectors-KBps =
					<61 512 0 0>,
					<61 512 240000 800000>,
					<61 512 240000 800000>;

		/* CPU-CLUSTER-WFI-LVL latency +1 */
		qcom,pm-qos-latency = <2>;

		qcom,dwc-usb3-msm-tx-fifo-size = <21288>;

		clocks = <&clock_gcc clk_gcc_usb30_master_clk>,
			<&clock_gcc clk_gcc_pcnoc_usb3_axi_clk>,
			<&clock_gcc clk_gcc_usb30_mock_utmi_clk>,
			<&clock_gcc clk_gcc_usb30_sleep_clk>,
			<&clock_gcc clk_xo_dwc3_clk>,
			<&clock_gcc clk_gcc_usb_phy_cfg_ahb_clk>;

		clock-names = "core_clk", "iface_clk", "utmi_clk",
				"sleep_clk", "xo", "cfg_ahb_clk";

		qcom,core-clk-rate = <133333333>; /* NOM */
		qcom,core-clk-rate-hs = <60000000>; /* LOW SVS */

		resets = <&clock_gcc GCC_USB_30_BCR>;
		reset-names = "core_reset";

		dwc3@7000000 {
			compatible = "snps,dwc3";
			reg = <0x07000000 0xc8d0>;
			interrupt-parent = <&intc>;
			interrupts = <0 140 0>;
			usb-phy = <&qusb_phy>, <&ssphy>;
			tx-fifo-resize;
			snps,usb3-u1u2-disable;
			snps,nominal-elastic-buffer;
			snps,is-utmi-l1-suspend;
			snps,hird-threshold = /bits/ 8 <0x0>;
		};

		qcom,usbbam@7104000 {
			compatible = "qcom,usb-bam-msm";
			reg = <0x07104000 0x1a934>;
			interrupt-parent = <&intc>;
			interrupts = <0 135 0>;

			qcom,bam-type = <0>;
			qcom,usb-bam-fifo-baseaddr = <0x08605000>;
			qcom,usb-bam-num-pipes = <8>;
			qcom,ignore-core-reset-ack;
			qcom,disable-clk-gating;
			qcom,usb-bam-override-threshold = <0x4001>;
			qcom,usb-bam-max-mbps-highspeed = <400>;
			qcom,usb-bam-max-mbps-superspeed = <3600>;
			qcom,reset-bam-on-connect;

			qcom,pipe0 {
				label = "ssusb-ipa-out-0";
				qcom,usb-bam-mem-type = <1>;
				qcom,dir = <0>;
				qcom,pipe-num = <0>;
				qcom,peer-bam = <1>;
				qcom,src-bam-pipe-index = <1>;
				qcom,data-fifo-size = <0x8000>;
				qcom,descriptor-fifo-size = <0x2000>;
			};

			qcom,pipe1 {
				label = "ssusb-ipa-in-0";
				qcom,usb-bam-mem-type = <1>;
				qcom,dir = <1>;
				qcom,pipe-num = <0>;
				qcom,peer-bam = <1>;
				qcom,dst-bam-pipe-index = <0>;
				qcom,data-fifo-size = <0x8000>;
				qcom,descriptor-fifo-size = <0x2000>;
			};

			qcom,pipe2 {
				label = "ssusb-qdss-in-0";
				qcom,usb-bam-mem-type = <2>;
				qcom,dir = <1>;
				qcom,pipe-num = <0>;
				qcom,peer-bam = <0>;
				qcom,peer-bam-physical-address = <0x06044000>;
				qcom,src-bam-pipe-index = <0>;
				qcom,dst-bam-pipe-index = <2>;
				qcom,data-fifo-offset = <0x0>;
				qcom,data-fifo-size = <0xe00>;
				qcom,descriptor-fifo-offset = <0xe00>;
				qcom,descriptor-fifo-size = <0x200>;
			};

			qcom,pipe3 {
				label = "ssusb-dpl-ipa-in-1";
				qcom,usb-bam-mem-type = <1>;
				qcom,dir = <1>;
				qcom,pipe-num = <1>;
				qcom,peer-bam = <1>;
				qcom,dst-bam-pipe-index = <2>;
				qcom,data-fifo-size = <0x8000>;
				qcom,descriptor-fifo-size = <0x2000>;
			};
		};
	};

	qusb_phy: qusb@79000 {
		compatible = "qcom,qusb2phy";
		reg = <0x079000 0x180>,
			<0x01841030 0x4>,
			<0x0193f020 0x4>;
		reg-names = "qusb_phy_base",
			"ref_clk_addr",
			"tcsr_clamp_dig_n_1p8";

		USB3_GDSC-supply = <&gdsc_usb30>;
		vdd-supply = <&pm8953_l3>;
		vdda18-supply = <&pm8953_l7>;
		vdda33-supply = <&pm8953_l13>;
		qcom,vdd-voltage-level = <0 925000 925000>;

		qcom,qusb-phy-init-seq = <0xf8 0x80
					0xb3 0x84
					0x83 0x88
					0xc0 0x8c
					0x14 0x9c
					0x30 0x08
					0x79 0x0c
					0x21 0x10
					0x00 0x90
					0x9f 0x1c
					0x00 0x18>;
		phy_type= "utmi";
		qcom,phy-clk-scheme = "cml";
		qcom,major-rev = <1>;

		clocks = <&clock_gcc clk_bb_clk1>,
			 <&clock_gcc clk_gcc_qusb_ref_clk>,
			 <&clock_gcc clk_gcc_usb_phy_cfg_ahb_clk>,
			 <&clock_gcc clk_gcc_pcnoc_usb3_axi_clk>,
			 <&clock_gcc clk_gcc_usb30_master_clk>;

		clock-names = "ref_clk_src", "ref_clk", "cfg_ahb_clk",
			      "iface_clk", "core_clk";

		resets = <&clock_gcc GCC_QUSB2_PHY_BCR>;
		reset-names = "phy_reset";
	};

	ssphy: ssphy@78000 {
		compatible = "qcom,usb-ssphy-qmp";
		reg = <0x78000 0x9f8>,
		      <0x0193f244 0x4>;
		reg-names = "qmp_phy_base",
			    "vls_clamp_reg";

		qcom,qmp-phy-init-seq = /*<reg_offset, value, delay>*/
					<0xac 0x14 0x00
					0x34 0x08 0x00
					0x174 0x30 0x00
					0x3c 0x06 0x00
					0xb4 0x00 0x00
					0xb8 0x08 0x00
					0x194 0x06 0x3e8
					0x19c 0x01 0x00
					0x178 0x00 0x00
					0xd0 0x82 0x00
					0xdc 0x55 0x00
					0xe0 0x55 0x00
					0xe4 0x03 0x00
					0x78 0x0b 0x00
					0x84 0x16 0x00
					0x90 0x28 0x00
					0x108 0x80 0x00
					0x10c 0x00 0x00
					0x184 0x0a 0x00
					0x4c 0x15 0x00
					0x50 0x34 0x00
					0x54 0x00 0x00
					0xc8 0x00 0x00
					0x18c 0x00 0x00
					0xcc 0x00 0x00
					0x128 0x00 0x00
					0x0c 0x0a 0x00
					0x10 0x01 0x00
					0x1c 0x31 0x00
					0x20 0x01 0x00
					0x14 0x00 0x00
					0x18 0x00 0x00
					0x24 0xde 0x00
					0x28 0x07 0x00
					0x48 0x0f 0x00
					0x70 0x0f 0x00
					0x100 0x80 0x00
					0x440 0x0b 0x00
					0x4d8 0x02 0x00
					0x4dc 0x6c 0x00
					0x4e0 0xbb 0x00
					0x508 0x77 0x00
					0x50c 0x80 0x00
					0x514 0x03 0x00
					0x51c 0x16 0x00
					0x448 0x75 0x00
					0x454 0x00 0x00
					0x40c 0x0a 0x00
					0x41c 0x06 0x00
					0x510 0x00 0x00
					0x268 0x45 0x00
					0x2ac 0x12 0x00
					0x294 0x06 0x00
					0x254 0x00 0x00
					0x8c8 0x83 0x00
					0x8c4 0x02 0x00
					0x8cc 0x09 0x00
					0x8d0 0xa2 0x00
					0x8d4 0x85 0x00
					0x880 0xd1 0x00
					0x884 0x1f 0x00
					0x888 0x47 0x00
					0x80c 0x9f 0x00
					0x824 0x17 0x00
					0x828 0x0f 0x00
					0x8b8 0x75 0x00
					0x8bc 0x13 0x00
					0x8b0 0x86 0x00
					0x8a0 0x04 0x00
					0x88c 0x44 0x00
					0x870 0xe7 0x00
					0x874 0x03 0x00
					0x878 0x40 0x00
					0x87c 0x00 0x00
					0x9d8 0x88 0x00
					0xffffffff 0x00 0x00>;
		qcom,qmp-phy-reg-offset =
				<0x974  /* USB3_PHY_PCS_STATUS */
				0x8d8   /* USB3_PHY_AUTONOMOUS_MODE_CTRL */
				0x8dc   /* USB3_PHY_LFPS_RXTERM_IRQ_CLEAR */
				0x804   /* USB3_PHY_POWER_DOWN_CONTROL */
				0x800   /* USB3_PHY_SW_RESET */
				0x808>; /* USB3_PHY_START */

		vdd-supply = <&pm8953_l3>;
		core-supply = <&pm8953_l7>;
		qcom,vdd-voltage-level = <0 925000 925000>;
		qcom,core-voltage-level = <0 1800000 1800000>;
		qcom,vbus-valid-override;

		clocks = <&clock_gcc clk_gcc_usb3_aux_clk>,
			 <&clock_gcc clk_gcc_usb3_pipe_clk>,
			 <&clock_gcc clk_gcc_usb_phy_cfg_ahb_clk>,
			 <&clock_gcc clk_bb_clk1>,
			 <&clock_gcc clk_gcc_usb_ss_ref_clk>;

		clock-names = "aux_clk", "pipe_clk", "cfg_ahb_clk",
			      "ref_clk_src", "ref_clk";

		resets = <&clock_gcc GCC_USB3_PHY_BCR>,
			<&clock_gcc GCC_USB3PHY_PHY_BCR>;

		reset-names = "phy_reset", "phy_phy_reset";
	};

	dbm_1p5: dbm@70f8000 {
		compatible = "qcom,usb-dbm-1p5";
		reg = <0x070f8000 0x300>;
		qcom,reset-ep-after-lpm-resume;
	};
};

#include "pm8953-rpm-regulator.dtsi"
#include "pm8953.dtsi"
#include "msm8953-regulator.dtsi"
#include "msm-gdsc-8916.dtsi"

&gdsc_venus {
	clock-names = "bus_clk", "core_clk";
	clocks = <&clock_gcc clk_gcc_venus0_axi_clk>,
		<&clock_gcc clk_gcc_venus0_vcodec0_clk>;
	status = "okay";
};

&gdsc_venus_core0 {
	qcom,support-hw-trigger;
	clock-names ="core0_clk";
	clocks = <&clock_gcc clk_gcc_venus0_core0_vcodec0_clk>;
	status = "okay";
};

&gdsc_mdss {
	clock-names = "core_clk", "bus_clk";
	clocks = <&clock_gcc clk_gcc_mdss_mdp_clk>,
		<&clock_gcc clk_gcc_mdss_axi_clk>;
	proxy-supply = <&gdsc_mdss>;
	qcom,proxy-consumer-enable;
	status = "okay";
};

&gdsc_oxili_gx {
	clock-names = "core_root_clk";
	clocks =<&clock_gcc_gfx clk_gfx3d_clk_src>;
	qcom,force-enable-root-clk;
	parent-supply = <&gfx_vreg_corner>;
	status = "okay";
};

&gdsc_jpeg {
	clock-names = "core_clk", "bus_clk";
	clocks = <&clock_gcc clk_gcc_camss_jpeg0_clk>,
		<&clock_gcc clk_gcc_camss_jpeg_axi_clk>;
	status = "okay";
};

&gdsc_vfe {
	clock-names = "core_clk", "bus_clk", "micro_clk",
				"csi_clk";
	clocks = <&clock_gcc clk_gcc_camss_vfe0_clk>,
		<&clock_gcc clk_gcc_camss_vfe_axi_clk>,
		<&clock_gcc clk_gcc_camss_micro_ahb_clk>,
		<&clock_gcc clk_gcc_camss_csi_vfe0_clk>;
	status = "okay";
};

&gdsc_vfe1 {
	clock-names = "core_clk", "bus_clk", "micro_clk",
			"csi_clk";
	clocks = <&clock_gcc clk_gcc_camss_vfe1_clk>,
		<&clock_gcc clk_gcc_camss_vfe1_axi_clk>,
		<&clock_gcc clk_gcc_camss_micro_ahb_clk>,
		<&clock_gcc clk_gcc_camss_csi_vfe1_clk>;
	status = "okay";
};

&gdsc_cpp {
	clock-names = "core_clk", "bus_clk";
	clocks = <&clock_gcc clk_gcc_camss_cpp_clk>,
		<&clock_gcc clk_gcc_camss_cpp_axi_clk>;
	status = "okay";
};

&gdsc_oxili_cx {
	clock-names = "core_clk";
	clocks = <&clock_gcc_gfx clk_gcc_oxili_gfx3d_clk>;
	status = "okay";
};

&gdsc_usb30 {
	status = "okay";
};