blob: 9bbb2855ea91918e7c56c97a095f46a01a6b93ce [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Video configuration
3#
4
5menu "Graphics support"
Martin Schwidefskye25df122007-05-10 15:45:57 +02006 depends on HAS_IOMEM
Linus Torvalds1da177e2005-04-16 15:20:36 -07007
Randy Dunlap179b0252007-10-16 01:29:39 -07008source "drivers/char/agp/Kconfig"
9
Benjamin Herrenschmidtdeb2d2e2009-08-11 15:52:06 +100010source "drivers/gpu/vga/Kconfig"
11
Dave Airliec0e09202008-05-29 10:09:59 +100012source "drivers/gpu/drm/Kconfig"
Antonino A. Daplasba707102006-06-26 00:26:37 -070013
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -070014config VGASTATE
15 tristate
16 default n
17
Luming Yu23b0f012007-05-09 21:07:05 +080018config VIDEO_OUTPUT_CONTROL
19 tristate "Lowlevel video output switch controls"
Luming Yu23b0f012007-05-09 21:07:05 +080020 help
21 This framework adds support for low-level control of the video
22 output switch.
23
Randy Dunlap179b0252007-10-16 01:29:39 -070024menuconfig FB
Linus Torvalds1da177e2005-04-16 15:20:36 -070025 tristate "Support for frame buffer devices"
26 ---help---
27 The frame buffer device provides an abstraction for the graphics
28 hardware. It represents the frame buffer of some video hardware and
29 allows application software to access the graphics hardware through
30 a well-defined interface, so the software doesn't need to know
31 anything about the low-level (hardware register) stuff.
32
33 Frame buffer devices work identically across the different
34 architectures supported by Linux and make the implementation of
35 application programs easier and more portable; at this point, an X
36 server exists which uses the frame buffer device exclusively.
37 On several non-X86 architectures, the frame buffer device is the
38 only way to use the graphics hardware.
39
40 The device is accessed through special device nodes, usually located
41 in the /dev directory, i.e. /dev/fb*.
42
43 You need an utility program called fbset to make full use of frame
44 buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
45 and the Framebuffer-HOWTO at
Alex Buell248ae0d2009-01-29 14:25:16 -080046 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more
Linus Torvalds1da177e2005-04-16 15:20:36 -070047 information.
48
49 Say Y here and to the driver for your graphics board below if you
50 are compiling a kernel for a non-x86 architecture.
51
52 If you are compiling for the x86 architecture, you can say Y if you
53 want to play with it, but it is not essential. Please note that
54 running graphical applications that directly touch the hardware
55 (e.g. an accelerated X server) and that are not frame buffer
56 device-aware may cause unexpected results. If unsure, say N.
57
James Simmonse0e34ef2007-02-10 14:15:43 +000058config FIRMWARE_EDID
59 bool "Enable firmware EDID"
60 depends on FB
61 default n
62 ---help---
63 This enables access to the EDID transferred from the firmware.
64 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
65 transfers do not work for your driver and if you are using
66 nvidiafb, i810fb or savagefb.
67
68 In general, choosing Y for this option is safe. If you
69 experience extremely long delays while booting before you get
70 something on your display, try setting this to N. Matrox cards in
71 combination with certain motherboards and monitors are known to
72 suffer from this problem.
73
Dennis Munsiefc5891c2006-10-03 01:14:42 -070074config FB_DDC
75 tristate
James Simmonse0e34ef2007-02-10 14:15:43 +000076 depends on FB
77 select I2C_ALGOBIT
78 select I2C
Dennis Munsiefc5891c2006-10-03 01:14:42 -070079 default n
80
Michal Januszewski4d31a2b2008-10-15 22:03:51 -070081config FB_BOOT_VESA_SUPPORT
82 bool
83 depends on FB
84 default n
85 ---help---
86 If true, at least one selected framebuffer driver can take advantage
87 of VESA video modes set at an early boot stage via the vga= parameter.
88
Linus Torvalds1da177e2005-04-16 15:20:36 -070089config FB_CFB_FILLRECT
90 tristate
91 depends on FB
92 default n
93 ---help---
94 Include the cfb_fillrect function for generic software rectangle
95 filling. This is used by drivers that don't provide their own
96 (accelerated) version.
97
98config FB_CFB_COPYAREA
99 tristate
100 depends on FB
101 default n
102 ---help---
103 Include the cfb_copyarea function for generic software area copying.
104 This is used by drivers that don't provide their own (accelerated)
105 version.
106
107config FB_CFB_IMAGEBLIT
108 tristate
109 depends on FB
110 default n
111 ---help---
112 Include the cfb_imageblit function for generic software image
113 blitting. This is used by drivers that don't provide their own
114 (accelerated) version.
115
Pavel Pisa779121e2007-10-16 01:29:21 -0700116config FB_CFB_REV_PIXELS_IN_BYTE
117 bool
118 depends on FB
119 default n
120 ---help---
121 Allow generic frame-buffer functions to work on displays with 1, 2
122 and 4 bits per pixel depths which has opposite order of pixels in
123 byte order to bytes in long order.
124
Antonino A. Daplas68648ed2007-05-08 00:38:57 -0700125config FB_SYS_FILLRECT
126 tristate
127 depends on FB
128 default n
129 ---help---
130 Include the sys_fillrect function for generic software rectangle
131 filling. This is used by drivers that don't provide their own
132 (accelerated) version and the framebuffer is in system RAM.
133
134config FB_SYS_COPYAREA
135 tristate
136 depends on FB
137 default n
138 ---help---
139 Include the sys_copyarea function for generic software area copying.
140 This is used by drivers that don't provide their own (accelerated)
141 version and the framebuffer is in system RAM.
142
143config FB_SYS_IMAGEBLIT
144 tristate
145 depends on FB
146 default n
147 ---help---
148 Include the sys_imageblit function for generic software image
149 blitting. This is used by drivers that don't provide their own
150 (accelerated) version and the framebuffer is in system RAM.
151
Anton Vorontsove4c690e2008-04-28 02:14:49 -0700152menuconfig FB_FOREIGN_ENDIAN
153 bool "Framebuffer foreign endianness support"
154 depends on FB
155 ---help---
156 This menu will let you enable support for the framebuffers with
157 non-native endianness (e.g. Little-Endian framebuffer on a
158 Big-Endian machine). Most probably you don't have such hardware,
159 so it's safe to say "n" here.
160
161choice
162 prompt "Choice endianness support"
163 depends on FB_FOREIGN_ENDIAN
164
165config FB_BOTH_ENDIAN
166 bool "Support for Big- and Little-Endian framebuffers"
167
168config FB_BIG_ENDIAN
169 bool "Support for Big-Endian framebuffers only"
170
171config FB_LITTLE_ENDIAN
172 bool "Support for Little-Endian framebuffers only"
173
174endchoice
175
Antonino A. Daplas09aaf262007-05-08 00:39:03 -0700176config FB_SYS_FOPS
177 tristate
178 depends on FB
179 default n
180
Jaya Kumar60b59be2007-05-08 00:37:37 -0700181config FB_DEFERRED_IO
182 bool
183 depends on FB
Jaya Kumar60b59be2007-05-08 00:37:37 -0700184
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700185config FB_HECUBA
186 tristate
187 depends on FB
188 depends on FB_DEFERRED_IO
189
Ondrej Zajiceka2684222007-02-12 00:54:49 -0800190config FB_SVGALIB
191 tristate
192 depends on FB
193 default n
194 ---help---
195 Common utility functions useful to fbdev drivers of VGA-based
196 cards.
197
Linus Torvalds1da177e2005-04-16 15:20:36 -0700198config FB_MACMODES
199 tristate
200 depends on FB
201 default n
202
Michael Hanselmann5474c122006-06-25 05:47:08 -0700203config FB_BACKLIGHT
Michael Hanselmann4b755992006-07-30 03:04:19 -0700204 bool
205 depends on FB
206 select BACKLIGHT_LCD_SUPPORT
207 select BACKLIGHT_CLASS_DEVICE
208 default n
Michael Hanselmann5474c122006-06-25 05:47:08 -0700209
Linus Torvalds1da177e2005-04-16 15:20:36 -0700210config FB_MODE_HELPERS
211 bool "Enable Video Mode Handling Helpers"
212 depends on FB
213 default n
214 ---help---
215 This enables functions for handling video modes using the
216 Generalized Timing Formula and the EDID parser. A few drivers rely
217 on this feature such as the radeonfb, rivafb, and the i810fb. If
218 your driver does not take advantage of this feature, choosing Y will
219 just increase the kernel size by about 5K.
220
221config FB_TILEBLITTING
222 bool "Enable Tile Blitting Support"
223 depends on FB
224 default n
225 ---help---
226 This enables tile blitting. Tile blitting is a drawing technique
227 where the screen is divided into rectangular sections (tiles), whereas
228 the standard blitting divides the screen into pixels. Because the
229 default drawing element is a tile, drawing functions will be passed
230 parameters in terms of number of tiles instead of number of pixels.
231 For example, to draw a single character, instead of using bitmaps,
232 an index to an array of bitmaps will be used. To clear or move a
233 rectangular section of a screen, the rectangle will be described in
234 terms of number of tiles in the x- and y-axis.
235
236 This is particularly important to one driver, matroxfb. If
237 unsure, say N.
238
Miguel Ojeda10ccaf42007-04-23 14:41:09 -0700239comment "Frame buffer hardware drivers"
James Simmonse0e34ef2007-02-10 14:15:43 +0000240 depends on FB
241
Linus Torvalds1da177e2005-04-16 15:20:36 -0700242config FB_CIRRUS
243 tristate "Cirrus Logic support"
244 depends on FB && (ZORRO || PCI)
245 select FB_CFB_FILLRECT
246 select FB_CFB_COPYAREA
247 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700248 ---help---
249 This enables support for Cirrus Logic GD542x/543x based boards on
250 Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
251
252 If you have a PCI-based system, this enables support for these
253 chips: GD-543x, GD-544x, GD-5480.
254
255 Please read the file <file:Documentation/fb/cirrusfb.txt>.
256
257 Say N unless you have such a graphics board or plan to get one
258 before you next recompile the kernel.
259
260config FB_PM2
261 tristate "Permedia2 support"
262 depends on FB && ((AMIGA && BROKEN) || PCI)
263 select FB_CFB_FILLRECT
264 select FB_CFB_COPYAREA
265 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700266 help
Krzysztof Helt4edad7f2008-10-15 22:03:32 -0700267 This is the frame buffer device driver for cards based on
268 the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
269 The driver was tested on the following cards:
270 Diamond FireGL 1000 PRO AGP
271 ELSA Gloria Synergy PCI
272 Appian Jeronimo PRO (both heads) PCI
273 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
274 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
275 ASK Graphic Blaster Exxtreme AGP
276
277 To compile this driver as a module, choose M here: the
278 module will be called pm2fb.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700279
280config FB_PM2_FIFO_DISCONNECT
281 bool "enable FIFO disconnect feature"
282 depends on FB_PM2 && PCI
283 help
Krzysztof Helt4edad7f2008-10-15 22:03:32 -0700284 Support the Permedia2 FIFO disconnect feature.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700285
286config FB_ARMCLCD
287 tristate "ARM PrimeCell PL110 support"
288 depends on FB && ARM && ARM_AMBA
289 select FB_CFB_FILLRECT
290 select FB_CFB_COPYAREA
291 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700292 help
293 This framebuffer device driver is for the ARM PrimeCell PL110
294 Colour LCD controller. ARM PrimeCells provide the building
295 blocks for System on a Chip devices.
296
297 If you want to compile this as a module (=code which can be
298 inserted into and removed from the running kernel), say M
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +0500299 here and read <file:Documentation/kbuild/modules.txt>. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700300 will be called amba-clcd.
301
Marc Singer903e2bb2006-05-16 11:41:30 +0100302choice
303
304 depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
305 prompt "LCD Panel"
306 default FB_ARMCLCD_SHARP_LQ035Q7DB02
307
308config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
309 bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
310 help
311 This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
Matt LaPlantecab00892006-10-03 22:36:44 +0200312 color QVGA, HRTFT panel. The LogicPD device includes
Marc Singer903e2bb2006-05-16 11:41:30 +0100313 an integrated HRTFT controller IC.
314 The native resolution is 240x320.
315
316config FB_ARMCLCD_SHARP_LQ057Q3DC02
317 bool "LogicPD LCD 5.7\" QVGA"
318 help
319 This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
320 color QVGA, TFT panel. The LogicPD device includes an
321 The native resolution is 320x240.
322
323config FB_ARMCLCD_SHARP_LQ64D343
324 bool "LogicPD LCD 6.4\" VGA"
325 help
326 This is an implementation of the Sharp LQ64D343, a 6.4"
327 color VGA, TFT panel. The LogicPD device includes an
328 The native resolution is 640x480.
329
330config FB_ARMCLCD_SHARP_LQ10D368
331 bool "LogicPD LCD 10.4\" VGA"
332 help
333 This is an implementation of the Sharp LQ10D368, a 10.4"
334 color VGA, TFT panel. The LogicPD device includes an
335 The native resolution is 640x480.
336
337
338config FB_ARMCLCD_SHARP_LQ121S1DG41
339 bool "LogicPD LCD 12.1\" SVGA"
340 help
341 This is an implementation of the Sharp LQ121S1DG41, a 12.1"
342 color SVGA, TFT panel. The LogicPD device includes an
343 The native resolution is 800x600.
344
345 This panel requires a clock rate may be an integer fraction
346 of the base LCDCLK frequency. The driver will select the
347 highest frequency available that is lower than the maximum
348 allowed. The panel may flicker if the clock rate is
349 slower than the recommended minimum.
350
351config FB_ARMCLCD_AUO_A070VW01_WIDE
352 bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
353 help
354 This is an implementation of the AU Optronics, a 7.0"
355 WIDE Color. The native resolution is 234x480.
356
357config FB_ARMCLCD_HITACHI
358 bool "Hitachi Wide Screen 800x480"
359 help
360 This is an implementation of the Hitachi 800x480.
361
362endchoice
363
364
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365config FB_ACORN
366 bool "Acorn VIDC support"
Russell King635f0252008-10-28 09:43:54 +0000367 depends on (FB = y) && ARM && ARCH_ACORN
Linus Torvalds1da177e2005-04-16 15:20:36 -0700368 select FB_CFB_FILLRECT
369 select FB_CFB_COPYAREA
370 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700371 help
372 This is the frame buffer device driver for the Acorn VIDC graphics
373 hardware found in Acorn RISC PCs and other ARM-based machines. If
374 unsure, say N.
375
376config FB_CLPS711X
377 bool "CLPS711X LCD support"
378 depends on (FB = y) && ARM && ARCH_CLPS711X
379 select FB_CFB_FILLRECT
380 select FB_CFB_COPYAREA
381 select FB_CFB_IMAGEBLIT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800382 help
383 Say Y to enable the Framebuffer driver for the CLPS7111 and
384 EP7212 processors.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700385
386config FB_SA1100
387 bool "SA-1100 LCD support"
388 depends on (FB = y) && ARM && ARCH_SA1100
389 select FB_CFB_FILLRECT
390 select FB_CFB_COPYAREA
391 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700392 help
393 This is a framebuffer device for the SA-1100 LCD Controller.
394 See <http://www.linux-fbdev.org/> for information on framebuffer
395 devices.
396
397 If you plan to use the LCD display with your SA-1100 system, say
398 Y here.
399
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700400config FB_IMX
401 tristate "Motorola i.MX LCD support"
Sascha Hauer8c8fdbc2009-04-01 12:40:15 +0200402 depends on FB && (ARCH_MX1 || ARCH_MX2)
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700403 select FB_CFB_FILLRECT
404 select FB_CFB_COPYAREA
405 select FB_CFB_IMAGEBLIT
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700406
Linus Torvalds1da177e2005-04-16 15:20:36 -0700407config FB_CYBER2000
408 tristate "CyberPro 2000/2010/5000 support"
409 depends on FB && PCI && (BROKEN || !SPARC64)
410 select FB_CFB_FILLRECT
411 select FB_CFB_COPYAREA
412 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700413 help
414 This enables support for the Integraphics CyberPro 20x0 and 5000
415 VGA chips used in the Rebel.com Netwinder and other machines.
416 Say Y if you have a NetWinder or a graphics card containing this
417 device, otherwise say N.
418
419config FB_APOLLO
420 bool
421 depends on (FB = y) && APOLLO
422 default y
423 select FB_CFB_FILLRECT
424 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700425
426config FB_Q40
427 bool
428 depends on (FB = y) && Q40
429 default y
430 select FB_CFB_FILLRECT
431 select FB_CFB_COPYAREA
432 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700433
434config FB_AMIGA
435 tristate "Amiga native chipset support"
436 depends on FB && AMIGA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700437 help
438 This is the frame buffer device driver for the builtin graphics
439 chipset found in Amigas.
440
441 To compile this driver as a module, choose M here: the
442 module will be called amifb.
443
444config FB_AMIGA_OCS
445 bool "Amiga OCS chipset support"
446 depends on FB_AMIGA
447 help
448 This enables support for the original Agnus and Denise video chips,
449 found in the Amiga 1000 and most A500's and A2000's. If you intend
450 to run Linux on any of these systems, say Y; otherwise say N.
451
452config FB_AMIGA_ECS
453 bool "Amiga ECS chipset support"
454 depends on FB_AMIGA
455 help
456 This enables support for the Enhanced Chip Set, found in later
457 A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
458 you intend to run Linux on any of these systems, say Y; otherwise
459 say N.
460
461config FB_AMIGA_AGA
462 bool "Amiga AGA chipset support"
463 depends on FB_AMIGA
464 help
465 This enables support for the Advanced Graphics Architecture (also
466 known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
467 and CD32. If you intend to run Linux on any of these systems, say Y;
468 otherwise say N.
469
Linus Torvalds1da177e2005-04-16 15:20:36 -0700470config FB_FM2
471 bool "Amiga FrameMaster II/Rainbow II support"
472 depends on (FB = y) && ZORRO
473 select FB_CFB_FILLRECT
474 select FB_CFB_COPYAREA
475 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700476 help
477 This is the frame buffer device driver for the Amiga FrameMaster
478 card from BSC (exhibited 1992 but not shipped as a CBM product).
479
Jaya Kumar1154ea72005-06-21 17:17:04 -0700480config FB_ARC
481 tristate "Arc Monochrome LCD board support"
482 depends on FB && X86
Antonino A. Daplas922e6f92007-05-08 00:38:58 -0700483 select FB_SYS_FILLRECT
484 select FB_SYS_COPYAREA
485 select FB_SYS_IMAGEBLIT
Antonino A. Daplasd9a05f12007-05-08 00:39:04 -0700486 select FB_SYS_FOPS
Jaya Kumar1154ea72005-06-21 17:17:04 -0700487 help
488 This enables support for the Arc Monochrome LCD board. The board
489 is based on the KS-108 lcd controller and is typically a matrix
490 of 2*n chips. This driver was tested with a 128x64 panel. This
491 driver supports it for use with x86 SBCs through a 16 bit GPIO
Matt LaPlante09509602006-10-03 22:31:37 +0200492 interface (8 bit data, 8 bit control). If you anticipate using
Jaya Kumar1154ea72005-06-21 17:17:04 -0700493 this driver, say Y or M; otherwise say N. You must specify the
494 GPIO IO address to be used for setting control and data.
495
Linus Torvalds1da177e2005-04-16 15:20:36 -0700496config FB_ATARI
497 bool "Atari native chipset support"
Michael Schmitza1005012007-05-01 22:32:39 +0200498 depends on (FB = y) && ATARI
499 select FB_CFB_FILLRECT
500 select FB_CFB_COPYAREA
501 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700502 help
503 This is the frame buffer device driver for the builtin graphics
504 chipset found in Ataris.
505
506config FB_OF
507 bool "Open Firmware frame buffer device support"
Stephen Rothwellbed59272007-03-04 17:04:44 +1100508 depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700509 select FB_CFB_FILLRECT
510 select FB_CFB_COPYAREA
511 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700512 select FB_MACMODES
513 help
514 Say Y if you want support with Open Firmware for your graphics
515 board.
516
517config FB_CONTROL
518 bool "Apple \"control\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700519 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700520 select FB_CFB_FILLRECT
521 select FB_CFB_COPYAREA
522 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700523 select FB_MACMODES
524 help
525 This driver supports a frame buffer for the graphics adapter in the
526 Power Macintosh 7300 and others.
527
528config FB_PLATINUM
529 bool "Apple \"platinum\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700530 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700531 select FB_CFB_FILLRECT
532 select FB_CFB_COPYAREA
533 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700534 select FB_MACMODES
535 help
536 This driver supports a frame buffer for the "platinum" graphics
537 adapter in some Power Macintoshes.
538
539config FB_VALKYRIE
540 bool "Apple \"valkyrie\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700541 depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700542 select FB_CFB_FILLRECT
543 select FB_CFB_COPYAREA
544 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700545 select FB_MACMODES
546 help
547 This driver supports a frame buffer for the "valkyrie" graphics
548 adapter in some Power Macintoshes.
549
550config FB_CT65550
551 bool "Chips 65550 display support"
Randy Dunlap0f8c02342007-11-14 16:58:45 -0800552 depends on (FB = y) && PPC32 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700553 select FB_CFB_FILLRECT
554 select FB_CFB_COPYAREA
555 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700556 help
557 This is the frame buffer device driver for the Chips & Technologies
558 65550 graphics chip in PowerBooks.
559
560config FB_ASILIANT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800561 bool "Asiliant (Chips) 69000 display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700562 depends on (FB = y) && PCI
563 select FB_CFB_FILLRECT
564 select FB_CFB_COPYAREA
565 select FB_CFB_IMAGEBLIT
Antonino A. Daplas4de0b1e2006-04-27 18:40:47 -0700566 help
567 This is the frame buffer device driver for the Asiliant 69030 chipset
Linus Torvalds1da177e2005-04-16 15:20:36 -0700568
569config FB_IMSTT
570 bool "IMS Twin Turbo display support"
571 depends on (FB = y) && PCI
572 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700573 select FB_MACMODES if PPC
574 help
575 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
576 many Macintosh and compatible computers.
577
Linus Torvalds1da177e2005-04-16 15:20:36 -0700578config FB_VGA16
579 tristate "VGA 16-color graphics support"
580 depends on FB && (X86 || PPC)
581 select FB_CFB_FILLRECT
582 select FB_CFB_COPYAREA
583 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700584 select VGASTATE
Antonino A. Daplasd60d2d82007-05-08 00:39:12 -0700585 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700586 help
587 This is the frame buffer device driver for VGA 16 color graphic
588 cards. Say Y if you have such a card.
589
590 To compile this driver as a module, choose M here: the
591 module will be called vga16fb.
592
Michael Henneriche9fa7c42007-10-16 01:29:38 -0700593config FB_BF54X_LQ043
594 tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
Mike Frysingere7a05aa2008-04-28 02:15:47 -0700595 depends on FB && (BF54x) && !BF542
Michael Henneriche9fa7c42007-10-16 01:29:38 -0700596 select FB_CFB_FILLRECT
597 select FB_CFB_COPYAREA
598 select FB_CFB_IMAGEBLIT
599 help
600 This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
601
Michael Hennerich99eeed47a2008-03-10 11:44:04 -0700602config FB_BFIN_T350MCQB
603 tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
604 depends on FB && BLACKFIN
605 select BFIN_GPTIMERS
606 select FB_CFB_FILLRECT
607 select FB_CFB_COPYAREA
608 select FB_CFB_IMAGEBLIT
609 help
610 This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
611 This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
612 It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
613
614
Linus Torvalds1da177e2005-04-16 15:20:36 -0700615config FB_STI
616 tristate "HP STI frame buffer device support"
617 depends on FB && PARISC
618 select FB_CFB_FILLRECT
619 select FB_CFB_COPYAREA
620 select FB_CFB_IMAGEBLIT
Alexander Beregalov17085a92009-04-03 13:33:32 +0000621 select STI_CONSOLE
622 select VT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700623 default y
624 ---help---
625 STI refers to the HP "Standard Text Interface" which is a set of
626 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
627 Enabling this option will implement the linux framebuffer device
628 using calls to the STI BIOS routines for initialisation.
629
630 If you enable this option, you will get a planar framebuffer device
631 /dev/fb which will work on the most common HP graphic cards of the
632 NGLE family, including the artist chips (in the 7xx and Bxxx series),
633 HCRX, HCRX24, CRX, CRX24 and VisEG series.
634
635 It is safe to enable this option, so you should probably say "Y".
636
637config FB_MAC
638 bool "Generic Macintosh display support"
639 depends on (FB = y) && MAC
640 select FB_CFB_FILLRECT
641 select FB_CFB_COPYAREA
642 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700643 select FB_MACMODES
644
Linus Torvalds1da177e2005-04-16 15:20:36 -0700645config FB_HP300
646 bool
Geert Uytterhoevenad7e4842008-05-18 20:47:09 +0200647 depends on (FB = y) && DIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700648 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700649 default y
650
651config FB_TGA
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700652 tristate "TGA/SFB+ framebuffer support"
653 depends on FB && (ALPHA || TC)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700654 select FB_CFB_FILLRECT
655 select FB_CFB_COPYAREA
656 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800657 select BITREVERSE
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700658 ---help---
659 This is the frame buffer device driver for generic TGA and SFB+
660 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
661 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
662 TURBOchannel cards, also known as PMAGD-A, -B and -C.
663
664 Due to hardware limitations ZLX-E2 and E3 cards are not supported
665 for DECstation 5000/200 systems. Additionally due to firmware
666 limitations these cards may cause troubles with booting DECstation
667 5000/240 and /260 systems, but are fully supported under Linux if
668 you manage to get it going. ;-)
669
670 Say Y if you have one of those.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700671
Michal Januszewski8bdb3a22007-10-16 01:28:26 -0700672config FB_UVESA
673 tristate "Userspace VESA VGA graphics support"
674 depends on FB && CONNECTOR
675 select FB_CFB_FILLRECT
676 select FB_CFB_COPYAREA
677 select FB_CFB_IMAGEBLIT
678 select FB_MODE_HELPERS
679 help
680 This is the frame buffer driver for generic VBE 2.0 compliant
681 graphic cards. It can also take advantage of VBE 3.0 features,
682 such as refresh rate adjustment.
683
684 This driver generally provides more features than vesafb but
685 requires a userspace helper application called 'v86d'. See
686 <file:Documentation/fb/uvesafb.txt> for more information.
687
688 If unsure, say N.
689
Linus Torvalds1da177e2005-04-16 15:20:36 -0700690config FB_VESA
691 bool "VESA VGA graphics support"
Brian Gerst0d078f62005-10-30 14:59:20 -0800692 depends on (FB = y) && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -0700693 select FB_CFB_FILLRECT
694 select FB_CFB_COPYAREA
695 select FB_CFB_IMAGEBLIT
Michal Januszewski4d31a2b2008-10-15 22:03:51 -0700696 select FB_BOOT_VESA_SUPPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700697 help
698 This is the frame buffer device driver for generic VESA 2.0
699 compliant graphic cards. The older VESA 1.2 cards are not supported.
700 You will get a boot time penguin logo at no additional cost. Please
701 read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
702
Huang, Ying7c831722007-11-28 16:21:55 -0800703config FB_EFI
704 bool "EFI-based Framebuffer Support"
Edgar Hucekb64ef8a2006-08-13 23:24:16 -0700705 depends on (FB = y) && X86 && EFI
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700706 select FB_CFB_FILLRECT
707 select FB_CFB_COPYAREA
708 select FB_CFB_IMAGEBLIT
709 help
Peter Jones7c08c9a2008-10-15 22:03:43 -0700710 This is the EFI frame buffer device driver. If the firmware on
711 your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
712 using the EFI framebuffer as your console.
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700713
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700714config FB_N411
715 tristate "N411 Apollo/Hecuba devkit support"
Jaya Kumaraad09e52007-05-08 00:37:43 -0700716 depends on FB && X86 && MMU
Antonino A. Daplasd6774932007-05-08 00:39:00 -0700717 select FB_SYS_FILLRECT
718 select FB_SYS_COPYAREA
719 select FB_SYS_IMAGEBLIT
Antonino A. Daplas28d45642007-05-08 00:39:06 -0700720 select FB_SYS_FOPS
Jaya Kumaraad09e52007-05-08 00:37:43 -0700721 select FB_DEFERRED_IO
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700722 select FB_HECUBA
Jaya Kumaraad09e52007-05-08 00:37:43 -0700723 help
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700724 This enables support for the Apollo display controller in its
725 Hecuba form using the n411 devkit.
Jaya Kumaraad09e52007-05-08 00:37:43 -0700726
Linus Torvalds1da177e2005-04-16 15:20:36 -0700727config FB_HGA
728 tristate "Hercules mono graphics support"
729 depends on FB && X86
730 select FB_CFB_FILLRECT
731 select FB_CFB_COPYAREA
732 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700733 help
734 Say Y here if you have a Hercules mono graphics card.
735
736 To compile this driver as a module, choose M here: the
737 module will be called hgafb.
738
739 As this card technology is 15 years old, most people will answer N
740 here.
741
742config FB_HGA_ACCEL
743 bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
744 depends on FB_HGA && EXPERIMENTAL
745 ---help---
746 This will compile the Hercules mono graphics with
747 acceleration functions.
748
Linus Torvalds1da177e2005-04-16 15:20:36 -0700749config FB_SGIVW
750 tristate "SGI Visual Workstation framebuffer support"
751 depends on FB && X86_VISWS
752 select FB_CFB_FILLRECT
753 select FB_CFB_COPYAREA
754 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700755 help
756 SGI Visual Workstation support for framebuffer graphics.
757
758config FB_GBE
759 bool "SGI Graphics Backend frame buffer support"
760 depends on (FB = y) && (SGI_IP32 || X86_VISWS)
761 select FB_CFB_FILLRECT
762 select FB_CFB_COPYAREA
763 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700764 help
765 This is the frame buffer device driver for SGI Graphics Backend.
766 This chip is used in SGI O2 and Visual Workstation 320/540.
767
768config FB_GBE_MEM
769 int "Video memory size in MB"
770 depends on FB_GBE
Martin Michlmayr80c410d2006-02-24 13:04:16 -0800771 default 4
Linus Torvalds1da177e2005-04-16 15:20:36 -0700772 help
773 This is the amount of memory reserved for the framebuffer,
774 which can be any value between 1MB and 8MB.
775
Mark Fortescue1a571982005-11-29 19:34:44 -0800776config FB_SBUS
777 bool "SBUS and UPA framebuffers"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800778 depends on (FB = y) && SPARC
Mark Fortescue1a571982005-11-29 19:34:44 -0800779 help
780 Say Y if you want support for SBUS or UPA based frame buffer device.
781
Linus Torvalds1da177e2005-04-16 15:20:36 -0700782config FB_BW2
783 bool "BWtwo support"
Adrian Bunke0196302007-02-12 00:54:50 -0800784 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700785 select FB_CFB_FILLRECT
786 select FB_CFB_COPYAREA
787 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700788 help
789 This is the frame buffer device driver for the BWtwo frame buffer.
790
791config FB_CG3
792 bool "CGthree support"
Adrian Bunke0196302007-02-12 00:54:50 -0800793 depends on (FB = y) && (SPARC && FB_SBUS)
Mark Fortescue1a571982005-11-29 19:34:44 -0800794 select FB_CFB_FILLRECT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700795 select FB_CFB_COPYAREA
796 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700797 help
798 This is the frame buffer device driver for the CGthree frame buffer.
799
800config FB_CG6
801 bool "CGsix (GX,TurboGX) support"
Adrian Bunke0196302007-02-12 00:54:50 -0800802 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700803 select FB_CFB_COPYAREA
804 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700805 help
806 This is the frame buffer device driver for the CGsix (GX, TurboGX)
807 frame buffer.
808
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700809config FB_FFB
810 bool "Creator/Creator3D/Elite3D support"
811 depends on FB_SBUS && SPARC64
812 select FB_CFB_COPYAREA
813 select FB_CFB_IMAGEBLIT
814 help
815 This is the frame buffer device driver for the Creator, Creator3D,
816 and Elite3D graphics boards.
817
818config FB_TCX
819 bool "TCX (SS4/SS5 only) support"
820 depends on FB_SBUS
821 select FB_CFB_FILLRECT
822 select FB_CFB_COPYAREA
823 select FB_CFB_IMAGEBLIT
824 help
825 This is the frame buffer device driver for the TCX 24/8bit frame
826 buffer.
827
828config FB_CG14
829 bool "CGfourteen (SX) support"
830 depends on FB_SBUS
831 select FB_CFB_FILLRECT
832 select FB_CFB_COPYAREA
833 select FB_CFB_IMAGEBLIT
834 help
835 This is the frame buffer device driver for the CGfourteen frame
836 buffer on Desktop SPARCsystems with the SX graphics option.
837
838config FB_P9100
839 bool "P9100 (Sparcbook 3 only) support"
840 depends on FB_SBUS
841 select FB_CFB_FILLRECT
842 select FB_CFB_COPYAREA
843 select FB_CFB_IMAGEBLIT
844 help
845 This is the frame buffer device driver for the P9100 card
846 supported on Sparcbook 3 machines.
847
848config FB_LEO
849 bool "Leo (ZX) support"
850 depends on FB_SBUS
851 select FB_CFB_FILLRECT
852 select FB_CFB_COPYAREA
853 select FB_CFB_IMAGEBLIT
854 help
855 This is the frame buffer device driver for the SBUS-based Sun ZX
856 (leo) frame buffer cards.
857
858config FB_IGA
859 bool "IGA 168x display support"
David S. Millere11a6c22007-06-03 17:35:24 -0700860 depends on (FB = y) && SPARC32
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700861 select FB_CFB_FILLRECT
862 select FB_CFB_COPYAREA
863 select FB_CFB_IMAGEBLIT
864 help
865 This is the framebuffer device for the INTERGRAPHICS 1680 and
866 successor frame buffer cards.
867
868config FB_XVR500
869 bool "Sun XVR-500 3DLABS Wildcat support"
David S. Millere11a6c22007-06-03 17:35:24 -0700870 depends on (FB = y) && PCI && SPARC64
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700871 select FB_CFB_FILLRECT
872 select FB_CFB_COPYAREA
873 select FB_CFB_IMAGEBLIT
874 help
875 This is the framebuffer device for the Sun XVR-500 and similar
876 graphics cards based upon the 3DLABS Wildcat chipset. The driver
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200877 only works on sparc64 systems where the system firmware has
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700878 mostly initialized the card already. It is treated as a
879 completely dumb framebuffer device.
880
881config FB_XVR2500
882 bool "Sun XVR-2500 3DLABS Wildcat support"
David S. Millere11a6c22007-06-03 17:35:24 -0700883 depends on (FB = y) && PCI && SPARC64
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700884 select FB_CFB_FILLRECT
885 select FB_CFB_COPYAREA
886 select FB_CFB_IMAGEBLIT
887 help
888 This is the framebuffer device for the Sun XVR-2500 and similar
889 graphics cards based upon the 3DLABS Wildcat chipset. The driver
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200890 only works on sparc64 systems where the system firmware has
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700891 mostly initialized the card already. It is treated as a
892 completely dumb framebuffer device.
893
Linus Torvalds1da177e2005-04-16 15:20:36 -0700894config FB_PVR2
895 tristate "NEC PowerVR 2 display support"
896 depends on FB && SH_DREAMCAST
897 select FB_CFB_FILLRECT
898 select FB_CFB_COPYAREA
899 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700900 ---help---
901 Say Y here if you have a PowerVR 2 card in your box. If you plan to
902 run linux on your Dreamcast, you will have to say Y here.
903 This driver may or may not work on other PowerVR 2 cards, but is
904 totally untested. Use at your own risk. If unsure, say N.
905
906 To compile this driver as a module, choose M here: the
907 module will be called pvr2fb.
908
909 You can pass several parameters to the driver at boot time or at
910 module load time. The parameters look like "video=pvr2:XXX", where
911 the meaning of XXX can be found at the end of the main source file
912 (<file:drivers/video/pvr2fb.c>). Please see the file
913 <file:Documentation/fb/pvr2fb.txt>.
914
915config FB_EPSON1355
916 bool "Epson 1355 framebuffer support"
Paul Mundt1a3f2882007-07-17 04:05:48 -0700917 depends on (FB = y) && ARCH_CEIVA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700918 select FB_CFB_FILLRECT
919 select FB_CFB_COPYAREA
920 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700921 help
922 Build in support for the SED1355 Epson Research Embedded RAMDAC
923 LCD/CRT Controller (since redesignated as the S1D13505) as a
924 framebuffer. Product specs at
925 <http://www.erd.epson.com/vdc/html/products.htm>.
926
Randy Dunlapecc41d52005-11-07 01:00:29 -0800927config FB_S1D13XXX
928 tristate "Epson S1D13XXX framebuffer support"
929 depends on FB
930 select FB_CFB_FILLRECT
931 select FB_CFB_COPYAREA
932 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -0800933 help
934 Support for S1D13XXX framebuffer device family (currently only
935 working with S1D13806). Product specs at
936 <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
937
Nicolas Ferre14340582007-05-10 22:23:26 -0700938config FB_ATMEL
939 tristate "AT91/AT32 LCD Controller support"
Nicolas Ferre915190f2009-07-21 11:31:29 +0100940 depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
Nicolas Ferre14340582007-05-10 22:23:26 -0700941 select FB_CFB_FILLRECT
942 select FB_CFB_COPYAREA
943 select FB_CFB_IMAGEBLIT
944 help
945 This enables support for the AT91/AT32 LCD Controller.
946
947config FB_INTSRAM
948 bool "Frame Buffer in internal SRAM"
949 depends on FB_ATMEL && ARCH_AT91SAM9261
950 help
951 Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
952 to let frame buffer in external SDRAM.
953
Nicolas Ferre250a2692007-07-21 04:37:59 -0700954config FB_ATMEL_STN
955 bool "Use a STN display with AT91/AT32 LCD Controller"
Nicolas Ferre915190f2009-07-21 11:31:29 +0100956 depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
Nicolas Ferre250a2692007-07-21 04:37:59 -0700957 default n
958 help
959 Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
960 Controller. Say N if you want to connect a TFT.
961
962 If unsure, say N.
963
Linus Torvalds1da177e2005-04-16 15:20:36 -0700964config FB_NVIDIA
965 tristate "nVidia Framebuffer Support"
966 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +0000967 select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700968 select FB_MODE_HELPERS
969 select FB_CFB_FILLRECT
970 select FB_CFB_COPYAREA
971 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800972 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700973 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700974 help
975 This driver supports graphics boards with the nVidia chips, TNT
976 and newer. For very old chipsets, such as the RIVA128, then use
977 the rivafb.
978 Say Y if you have such a graphics board.
979
980 To compile this driver as a module, choose M here: the
981 module will be called nvidiafb.
982
983config FB_NVIDIA_I2C
984 bool "Enable DDC Support"
Benjamin Herrenschmidt85f15032005-11-07 01:00:30 -0800985 depends on FB_NVIDIA
James Simmons166f60d2007-03-06 01:42:02 -0800986 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700987 help
988 This enables I2C support for nVidia Chipsets. This is used
989 only for getting EDID information from the attached display
990 allowing for robust video mode handling and switching.
991
992 Because fbdev-2.6 requires that drivers must be able to
993 independently validate video mode parameters, you should say Y
994 here.
995
Jean Delvare647f2e72007-05-10 22:23:29 -0700996config FB_NVIDIA_DEBUG
997 bool "Lots of debug output"
998 depends on FB_NVIDIA
999 default n
1000 help
1001 Say Y here if you want the nVidia driver to output all sorts
1002 of debugging information to provide to the maintainer when
1003 something goes wrong.
1004
Michael Hanselmann5474c122006-06-25 05:47:08 -07001005config FB_NVIDIA_BACKLIGHT
1006 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001007 depends on FB_NVIDIA
Michael Hanselmann5474c122006-06-25 05:47:08 -07001008 default y
1009 help
1010 Say Y here if you want to control the backlight of your display.
1011
Linus Torvalds1da177e2005-04-16 15:20:36 -07001012config FB_RIVA
1013 tristate "nVidia Riva support"
1014 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +00001015 select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001016 select FB_MODE_HELPERS
1017 select FB_CFB_FILLRECT
1018 select FB_CFB_COPYAREA
1019 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -08001020 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001021 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001022 help
1023 This driver supports graphics boards with the nVidia Riva/Geforce
1024 chips.
1025 Say Y if you have such a graphics board.
1026
1027 To compile this driver as a module, choose M here: the
1028 module will be called rivafb.
1029
1030config FB_RIVA_I2C
1031 bool "Enable DDC Support"
1032 depends on FB_RIVA
James Simmons166f60d2007-03-06 01:42:02 -08001033 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001034 help
1035 This enables I2C support for nVidia Chipsets. This is used
1036 only for getting EDID information from the attached display
1037 allowing for robust video mode handling and switching.
1038
1039 Because fbdev-2.6 requires that drivers must be able to
1040 independently validate video mode parameters, you should say Y
1041 here.
1042
1043config FB_RIVA_DEBUG
Jean Delvare647f2e72007-05-10 22:23:29 -07001044 bool "Lots of debug output"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001045 depends on FB_RIVA
1046 default n
1047 help
1048 Say Y here if you want the Riva driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001049 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001050 something goes wrong.
1051
Michael Hanselmann5474c122006-06-25 05:47:08 -07001052config FB_RIVA_BACKLIGHT
1053 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001054 depends on FB_RIVA
Michael Hanselmann5474c122006-06-25 05:47:08 -07001055 default y
1056 help
1057 Say Y here if you want to control the backlight of your display.
1058
Linus Torvalds1da177e2005-04-16 15:20:36 -07001059config FB_I810
1060 tristate "Intel 810/815 support (EXPERIMENTAL)"
Krzysztof Helta1a5c3b2009-02-18 14:48:38 -08001061 depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001062 select FB_MODE_HELPERS
1063 select FB_CFB_FILLRECT
1064 select FB_CFB_COPYAREA
1065 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001066 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001067 help
1068 This driver supports the on-board graphics built in to the Intel 810
1069 and 815 chipsets. Say Y if you have and plan to use such a board.
1070
1071 To compile this driver as a module, choose M here: the
1072 module will be called i810fb.
1073
1074 For more information, please read
1075 <file:Documentation/fb/intel810.txt>
1076
1077config FB_I810_GTF
1078 bool "use VESA Generalized Timing Formula"
1079 depends on FB_I810
1080 help
1081 If you say Y, then the VESA standard, Generalized Timing Formula
1082 or GTF, will be used to calculate the required video timing values
1083 per video mode. Since the GTF allows nondiscrete timings
1084 (nondiscrete being a range of values as opposed to discrete being a
1085 set of values), you'll be able to use any combination of horizontal
1086 and vertical resolutions, and vertical refresh rates without having
1087 to specify your own timing parameters. This is especially useful
1088 to maximize the performance of an aging display, or if you just
1089 have a display with nonstandard dimensions. A VESA compliant
1090 monitor is recommended, but can still work with non-compliant ones.
1091 If you need or want this, then select this option. The timings may
1092 not be compliant with Intel's recommended values. Use at your own
1093 risk.
1094
1095 If you say N, the driver will revert to discrete video timings
1096 using a set recommended by Intel in their documentation.
1097
1098 If unsure, say N.
1099
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -07001100config FB_I810_I2C
1101 bool "Enable DDC Support"
Antonino A. Daplasdb845022005-09-13 01:25:02 -07001102 depends on FB_I810 && FB_I810_GTF
Antonino A. Daplase80987f2006-10-03 01:14:44 -07001103 select FB_DDC
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -07001104 help
1105
Alan Hourihanedbe7e422007-05-08 00:39:25 -07001106config FB_LE80578
1107 tristate "Intel LE80578 (Vermilion) support"
1108 depends on FB && PCI && X86
1109 select FB_MODE_HELPERS
1110 select FB_CFB_FILLRECT
1111 select FB_CFB_COPYAREA
1112 select FB_CFB_IMAGEBLIT
1113 help
1114 This driver supports the LE80578 (Vermilion Range) chipset
1115
1116config FB_CARILLO_RANCH
1117 tristate "Intel Carillo Ranch support"
1118 depends on FB_LE80578 && FB && PCI && X86
1119 help
1120 This driver supports the LE80578 (Carillo Ranch) board
1121
Linus Torvalds1da177e2005-04-16 15:20:36 -07001122config FB_INTEL
Maik Broemme0e170c72008-04-28 02:15:43 -07001123 tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
Jesse Barnesba0ab822009-07-03 11:24:46 -07001124 depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EMBEDDED
Linus Torvalds1da177e2005-04-16 15:20:36 -07001125 select FB_MODE_HELPERS
1126 select FB_CFB_FILLRECT
1127 select FB_CFB_COPYAREA
1128 select FB_CFB_IMAGEBLIT
Krzysztof Helt4b198282009-06-18 16:49:21 -07001129 select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
Jesse Barnesba0ab822009-07-03 11:24:46 -07001130 depends on !DRM_I915
Linus Torvalds1da177e2005-04-16 15:20:36 -07001131 help
1132 This driver supports the on-board graphics built in to the Intel
Maik Broemme0e170c72008-04-28 02:15:43 -07001133 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001134 Say Y if you have and plan to use such a board.
1135
Krzysztof Helt4b198282009-06-18 16:49:21 -07001136 To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
1137
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001138 To compile this driver as a module, choose M here: the
Linus Torvalds1da177e2005-04-16 15:20:36 -07001139 module will be called intelfb.
1140
Christian Merkled463d342006-08-22 10:07:01 +10001141 For more information, please read <file:Documentation/fb/intelfb.txt>
1142
Linus Torvalds1da177e2005-04-16 15:20:36 -07001143config FB_INTEL_DEBUG
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001144 bool "Intel driver Debug Messages"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001145 depends on FB_INTEL
1146 ---help---
1147 Say Y here if you want the Intel driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001148 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001149 something goes wrong.
1150
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001151config FB_INTEL_I2C
1152 bool "DDC/I2C for Intel framebuffer support"
1153 depends on FB_INTEL
James Simmons166f60d2007-03-06 01:42:02 -08001154 select FB_DDC
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001155 default y
1156 help
1157 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
1158
Linus Torvalds1da177e2005-04-16 15:20:36 -07001159config FB_MATROX
1160 tristate "Matrox acceleration"
1161 depends on FB && PCI
1162 select FB_CFB_FILLRECT
1163 select FB_CFB_COPYAREA
1164 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001165 select FB_TILEBLITTING
1166 select FB_MACMODES if PPC_PMAC
1167 ---help---
1168 Say Y here if you have a Matrox Millennium, Matrox Millennium II,
1169 Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
1170 Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
1171 Matrox G400, G450 or G550 card in your box.
1172
1173 To compile this driver as a module, choose M here: the
1174 module will be called matroxfb.
1175
1176 You can pass several parameters to the driver at boot time or at
1177 module load time. The parameters look like "video=matrox:XXX", and
1178 are described in <file:Documentation/fb/matroxfb.txt>.
1179
1180config FB_MATROX_MILLENIUM
1181 bool "Millennium I/II support"
1182 depends on FB_MATROX
1183 help
1184 Say Y here if you have a Matrox Millennium or Matrox Millennium II
1185 video card. If you select "Advanced lowlevel driver options" below,
1186 you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
1187 packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
1188 also use font widths different from 8.
1189
1190config FB_MATROX_MYSTIQUE
1191 bool "Mystique support"
1192 depends on FB_MATROX
1193 help
1194 Say Y here if you have a Matrox Mystique or Matrox Mystique 220
1195 video card. If you select "Advanced lowlevel driver options" below,
1196 you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
1197 packed pixel and 32 bpp packed pixel. You can also use font widths
1198 different from 8.
1199
1200config FB_MATROX_G
1201 bool "G100/G200/G400/G450/G550 support"
1202 depends on FB_MATROX
1203 ---help---
1204 Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
1205 video card. If you select "Advanced lowlevel driver options", you
1206 should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
1207 pixel and 32 bpp packed pixel. You can also use font widths
1208 different from 8.
1209
Jean Delvareee831262009-05-12 13:19:41 -07001210 If you need support for G400 secondary head, you must say Y to
1211 "Matrox I2C support" and "G400 second head support" right below.
1212 G450/G550 secondary head and digital output are supported without
1213 additional modules.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001214
1215 The driver starts in monitor mode. You must use the matroxset tool
1216 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
1217 swap primary and secondary head outputs, or to change output mode.
1218 Secondary head driver always start in 640x480 resolution and you
1219 must use fbset to change it.
1220
1221 Do not forget that second head supports only 16 and 32 bpp
1222 packed pixels, so it is a good idea to compile them into the kernel
1223 too. You can use only some font widths, as the driver uses generic
1224 painting procedures (the secondary head does not use acceleration
1225 engine).
1226
1227 G450/G550 hardware can display TV picture only from secondary CRTC,
1228 and it performs no scaling, so picture must have 525 or 625 lines.
1229
1230config FB_MATROX_I2C
1231 tristate "Matrox I2C support"
James Simmons166f60d2007-03-06 01:42:02 -08001232 depends on FB_MATROX
1233 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001234 ---help---
1235 This drivers creates I2C buses which are needed for accessing the
1236 DDC (I2C) bus present on all Matroxes, an I2C bus which
1237 interconnects Matrox optional devices, like MGA-TVO on G200 and
1238 G400, and the secondary head DDC bus, present on G400 only.
1239
1240 You can say Y or M here if you want to experiment with monitor
1241 detection code. You must say Y or M here if you want to use either
1242 second head of G400 or MGA-TVO on G200 or G400.
1243
1244 If you compile it as module, it will create a module named
1245 i2c-matroxfb.
1246
1247config FB_MATROX_MAVEN
1248 tristate "G400 second head support"
1249 depends on FB_MATROX_G && FB_MATROX_I2C
1250 ---help---
1251 WARNING !!! This support does not work with G450 !!!
1252
1253 Say Y or M here if you want to use a secondary head (meaning two
1254 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1255 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1256 secondary head output is blanked while you are in X. With XFree
1257 3.9.17 preview you can use both heads if you use SVGA over fbdev or
1258 the fbdev driver on first head and the fbdev driver on second head.
1259
1260 If you compile it as module, two modules are created,
1261 matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
1262 both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
1263 also load i2c-matroxfb to get it to run.
1264
1265 The driver starts in monitor mode and you must use the matroxset
1266 tool (available at
1267 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1268 PAL or NTSC or to swap primary and secondary head outputs.
1269 Secondary head driver also always start in 640x480 resolution, you
1270 must use fbset to change it.
1271
1272 Also do not forget that second head supports only 16 and 32 bpp
1273 packed pixels, so it is a good idea to compile them into the kernel
1274 too. You can use only some font widths, as the driver uses generic
1275 painting procedures (the secondary head does not use acceleration
1276 engine).
1277
Linus Torvalds1da177e2005-04-16 15:20:36 -07001278config FB_RADEON
1279 tristate "ATI Radeon display support"
1280 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +00001281 select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001282 select FB_MODE_HELPERS
1283 select FB_CFB_FILLRECT
1284 select FB_CFB_COPYAREA
1285 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001286 select FB_MACMODES if PPC_OF
1287 help
1288 Choose this option if you want to use an ATI Radeon graphics card as
1289 a framebuffer device. There are both PCI and AGP versions. You
1290 don't need to choose this to run the Radeon in plain VGA mode.
1291
Linus Torvalds1da177e2005-04-16 15:20:36 -07001292 There is a product page at
Antonino A. Daplasf510a3c2005-09-09 13:04:41 -07001293 http://apps.ati.com/ATIcompare/
Michael Hanselmann5474c122006-06-25 05:47:08 -07001294
Linus Torvalds1da177e2005-04-16 15:20:36 -07001295config FB_RADEON_I2C
1296 bool "DDC/I2C for ATI Radeon support"
1297 depends on FB_RADEON
James Simmons166f60d2007-03-06 01:42:02 -08001298 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001299 default y
1300 help
1301 Say Y here if you want DDC/I2C support for your Radeon board.
1302
Michael Hanselmann5474c122006-06-25 05:47:08 -07001303config FB_RADEON_BACKLIGHT
1304 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001305 depends on FB_RADEON
Michael Hanselmann5474c122006-06-25 05:47:08 -07001306 default y
1307 help
1308 Say Y here if you want to control the backlight of your display.
1309
Linus Torvalds1da177e2005-04-16 15:20:36 -07001310config FB_RADEON_DEBUG
1311 bool "Lots of debug output from Radeon driver"
1312 depends on FB_RADEON
1313 default n
1314 help
1315 Say Y here if you want the Radeon driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001316 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001317 something goes wrong.
1318
1319config FB_ATY128
1320 tristate "ATI Rage128 display support"
1321 depends on FB && PCI
1322 select FB_CFB_FILLRECT
1323 select FB_CFB_COPYAREA
1324 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef2007-02-10 14:15:43 +00001325 select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001326 select FB_MACMODES if PPC_PMAC
1327 help
1328 This driver supports graphics boards with the ATI Rage128 chips.
1329 Say Y if you have such a graphics board and read
1330 <file:Documentation/fb/aty128fb.txt>.
1331
1332 To compile this driver as a module, choose M here: the
1333 module will be called aty128fb.
1334
Michael Hanselmann5474c122006-06-25 05:47:08 -07001335config FB_ATY128_BACKLIGHT
1336 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001337 depends on FB_ATY128
Michael Hanselmann5474c122006-06-25 05:47:08 -07001338 default y
1339 help
1340 Say Y here if you want to control the backlight of your display.
1341
Linus Torvalds1da177e2005-04-16 15:20:36 -07001342config FB_ATY
1343 tristate "ATI Mach64 display support" if PCI || ATARI
Andrew Mortonf2e782e2006-04-10 22:55:45 -07001344 depends on FB && !SPARC32
Linus Torvalds1da177e2005-04-16 15:20:36 -07001345 select FB_CFB_FILLRECT
1346 select FB_CFB_COPYAREA
1347 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef2007-02-10 14:15:43 +00001348 select FB_BACKLIGHT if FB_ATY_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001349 select FB_MACMODES if PPC
1350 help
1351 This driver supports graphics boards with the ATI Mach64 chips.
1352 Say Y if you have such a graphics board.
1353
1354 To compile this driver as a module, choose M here: the
1355 module will be called atyfb.
1356
1357config FB_ATY_CT
1358 bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
1359 depends on PCI && FB_ATY
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -07001360 default y if SPARC64 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001361 help
1362 Say Y here to support use of ATI's 64-bit Rage boards (or other
1363 boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1364 framebuffer device. The ATI product support page for these boards
1365 is at <http://support.ati.com/products/pc/mach64/>.
1366
1367config FB_ATY_GENERIC_LCD
1368 bool "Mach64 generic LCD support (EXPERIMENTAL)"
1369 depends on FB_ATY_CT
1370 help
1371 Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
1372 Rage XC, or Rage XL chipset.
1373
Linus Torvalds1da177e2005-04-16 15:20:36 -07001374config FB_ATY_GX
1375 bool "Mach64 GX support" if PCI
1376 depends on FB_ATY
1377 default y if ATARI
1378 help
1379 Say Y here to support use of the ATI Mach64 Graphics Expression
1380 board (or other boards based on the Mach64 GX chipset) as a
1381 framebuffer device. The ATI product support page for these boards
1382 is at
1383 <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
1384
Michael Hanselmann5474c122006-06-25 05:47:08 -07001385config FB_ATY_BACKLIGHT
1386 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001387 depends on FB_ATY
Michael Hanselmann5474c122006-06-25 05:47:08 -07001388 default y
1389 help
1390 Say Y here if you want to control the backlight of your display.
1391
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001392config FB_S3
1393 tristate "S3 Trio/Virge support"
1394 depends on FB && PCI
1395 select FB_CFB_FILLRECT
1396 select FB_CFB_COPYAREA
1397 select FB_CFB_IMAGEBLIT
1398 select FB_TILEBLITTING
1399 select FB_SVGALIB
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001400 select VGASTATE
Antonino A. Daplas8db51662007-05-08 00:39:14 -07001401 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001402 ---help---
1403 Driver for graphics boards with S3 Trio / S3 Virge chip.
1404
Linus Torvalds1da177e2005-04-16 15:20:36 -07001405config FB_SAVAGE
1406 tristate "S3 Savage support"
1407 depends on FB && PCI && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001408 select FB_MODE_HELPERS
1409 select FB_CFB_FILLRECT
1410 select FB_CFB_COPYAREA
1411 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001412 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001413 help
1414 This driver supports notebooks and computers with S3 Savage PCI/AGP
1415 chips.
1416
1417 Say Y if you have such a graphics card.
1418
1419 To compile this driver as a module, choose M here; the module
1420 will be called savagefb.
1421
1422config FB_SAVAGE_I2C
1423 bool "Enable DDC2 Support"
1424 depends on FB_SAVAGE
James Simmons166f60d2007-03-06 01:42:02 -08001425 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001426 help
1427 This enables I2C support for S3 Savage Chipsets. This is used
1428 only for getting EDID information from the attached display
1429 allowing for robust video mode handling and switching.
1430
1431 Because fbdev-2.6 requires that drivers must be able to
1432 independently validate video mode parameters, you should say Y
1433 here.
1434
1435config FB_SAVAGE_ACCEL
1436 bool "Enable Console Acceleration"
1437 depends on FB_SAVAGE
1438 default n
1439 help
1440 This option will compile in console acceleration support. If
1441 the resulting framebuffer console has bothersome glitches, then
1442 choose N here.
1443
1444config FB_SIS
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001445 tristate "SiS/XGI display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001446 depends on FB && PCI
1447 select FB_CFB_FILLRECT
1448 select FB_CFB_COPYAREA
1449 select FB_CFB_IMAGEBLIT
Krzysztof Helt4b198282009-06-18 16:49:21 -07001450 select FB_BOOT_VESA_SUPPORT if FB_SIS = y
Linus Torvalds1da177e2005-04-16 15:20:36 -07001451 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001452 This is the frame buffer device driver for the SiS 300, 315, 330
1453 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
1454 Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001455
1456 To compile this driver as a module, choose M here; the module
1457 will be called sisfb.
1458
1459config FB_SIS_300
1460 bool "SiS 300 series support"
1461 depends on FB_SIS
1462 help
1463 Say Y here to support use of the SiS 300/305, 540, 630 and 730.
1464
1465config FB_SIS_315
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001466 bool "SiS 315/330/340 series and XGI support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001467 depends on FB_SIS
1468 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001469 Say Y here to support use of the SiS 315, 330 and 340 series
1470 (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
1471 as XGI V3XT, V5, V8 and Z7.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001472
Joseph Chan6bde3ed2008-10-15 22:03:20 -07001473config FB_VIA
1474 tristate "VIA UniChrome (Pro) and Chrome9 display support"
1475 depends on FB && PCI
1476 select FB_CFB_FILLRECT
1477 select FB_CFB_COPYAREA
1478 select FB_CFB_IMAGEBLIT
1479 select FB_SOFT_CURSOR
1480 select I2C_ALGOBIT
1481 select I2C
1482 help
1483 This is the frame buffer device driver for Graphics chips of VIA
1484 UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
1485 CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
1486 /P4M900,VX800)
1487 Say Y if you have a VIA UniChrome graphics board.
1488
1489 To compile this driver as a module, choose M here: the
1490 module will be called viafb.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001491config FB_NEOMAGIC
1492 tristate "NeoMagic display support"
1493 depends on FB && PCI
1494 select FB_MODE_HELPERS
1495 select FB_CFB_FILLRECT
1496 select FB_CFB_COPYAREA
1497 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001498 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001499 help
1500 This driver supports notebooks with NeoMagic PCI chips.
1501 Say Y if you have such a graphics card.
1502
1503 To compile this driver as a module, choose M here: the
1504 module will be called neofb.
1505
1506config FB_KYRO
1507 tristate "IMG Kyro support"
1508 depends on FB && PCI
1509 select FB_CFB_FILLRECT
1510 select FB_CFB_COPYAREA
1511 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001512 help
1513 Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1514 graphics board.
1515
1516 To compile this driver as a module, choose M here: the
1517 module will be called kyrofb.
1518
1519config FB_3DFX
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001520 tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001521 depends on FB && PCI
1522 select FB_CFB_IMAGEBLIT
1523 select FB_CFB_FILLRECT
1524 select FB_CFB_COPYAREA
Krzysztof Heltfeff3882009-04-06 19:01:03 -07001525 select FB_MODE_HELPERS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001526 help
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001527 This driver supports graphics boards with the 3Dfx Banshee,
1528 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1529 such a graphics board.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001530
1531 To compile this driver as a module, choose M here: the
1532 module will be called tdfxfb.
1533
1534config FB_3DFX_ACCEL
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001535 bool "3Dfx Acceleration functions (EXPERIMENTAL)"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001536 depends on FB_3DFX && EXPERIMENTAL
1537 ---help---
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001538 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1539 device driver with acceleration functions.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001540
Krzysztof Heltfeff3882009-04-06 19:01:03 -07001541config FB_3DFX_I2C
1542 bool "Enable DDC/I2C support"
1543 depends on FB_3DFX && EXPERIMENTAL
1544 select FB_DDC
1545 default y
1546 help
1547 Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
1548
Linus Torvalds1da177e2005-04-16 15:20:36 -07001549config FB_VOODOO1
1550 tristate "3Dfx Voodoo Graphics (sst1) support"
1551 depends on FB && PCI
1552 select FB_CFB_FILLRECT
1553 select FB_CFB_COPYAREA
1554 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001555 ---help---
1556 Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
1557 Voodoo2 (cvg) based graphics card.
1558
1559 To compile this driver as a module, choose M here: the
1560 module will be called sstfb.
1561
1562 WARNING: Do not use any application that uses the 3D engine
1563 (namely glide) while using this driver.
Dirk Hohndele4031492007-10-30 13:37:19 -07001564 Please read the <file:Documentation/fb/sstfb.txt> for supported
Linus Torvalds1da177e2005-04-16 15:20:36 -07001565 options and other important info support.
1566
Ondrej Zajicek558b7bd2007-05-09 02:35:31 -07001567config FB_VT8623
1568 tristate "VIA VT8623 support"
1569 depends on FB && PCI
1570 select FB_CFB_FILLRECT
1571 select FB_CFB_COPYAREA
1572 select FB_CFB_IMAGEBLIT
1573 select FB_TILEBLITTING
1574 select FB_SVGALIB
1575 select VGASTATE
1576 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1577 ---help---
1578 Driver for CastleRock integrated graphics core in the
1579 VIA VT8623 [Apollo CLE266] chipset.
1580
Linus Torvalds1da177e2005-04-16 15:20:36 -07001581config FB_TRIDENT
Krzysztof Helt04645fc2009-03-31 15:25:48 -07001582 tristate "Trident/CyberXXX/CyberBlade support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001583 depends on FB && PCI
1584 select FB_CFB_FILLRECT
1585 select FB_CFB_COPYAREA
1586 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001587 ---help---
Krzysztof Helt4edad7f2008-10-15 22:03:32 -07001588 This is the frame buffer device driver for Trident PCI/AGP chipsets.
1589 Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
1590 and Blade XP.
1591 There are also integrated versions of these chips called CyberXXXX,
1592 CyberImage or CyberBlade. These chips are mostly found in laptops
Krzysztof Heltddb53d42009-03-31 15:25:40 -07001593 but also on some motherboards including early VIA EPIA motherboards.
1594 For more information, read <file:Documentation/fb/tridentfb.txt>
Linus Torvalds1da177e2005-04-16 15:20:36 -07001595
1596 Say Y if you have such a graphics board.
1597
1598 To compile this driver as a module, choose M here: the
1599 module will be called tridentfb.
1600
Ondrej Zajicek681e1472007-05-09 02:35:31 -07001601config FB_ARK
1602 tristate "ARK 2000PV support"
1603 depends on FB && PCI
1604 select FB_CFB_FILLRECT
1605 select FB_CFB_COPYAREA
1606 select FB_CFB_IMAGEBLIT
1607 select FB_TILEBLITTING
1608 select FB_SVGALIB
1609 select VGASTATE
1610 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1611 ---help---
1612 Driver for PCI graphics boards with ARK 2000PV chip
1613 and ICS 5342 RAMDAC.
1614
Linus Torvalds1da177e2005-04-16 15:20:36 -07001615config FB_PM3
Krzysztof Heltf23a06f2007-05-10 22:23:25 -07001616 tristate "Permedia3 support (EXPERIMENTAL)"
1617 depends on FB && PCI && EXPERIMENTAL
1618 select FB_CFB_FILLRECT
1619 select FB_CFB_COPYAREA
1620 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001621 help
1622 This is the frame buffer device driver for the 3DLabs Permedia3
1623 chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
1624 similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
1625 and maybe other boards.
1626
Sebastian Siewior2ece5f432008-07-23 21:30:49 -07001627config FB_CARMINE
1628 tristate "Fujitsu carmine frame buffer support"
1629 depends on FB && PCI
1630 select FB_CFB_FILLRECT
1631 select FB_CFB_COPYAREA
1632 select FB_CFB_IMAGEBLIT
1633 help
1634 This is the frame buffer device driver for the Fujitsu Carmine chip.
1635 The driver provides two independent frame buffer devices.
1636
1637choice
1638 depends on FB_CARMINE
1639 prompt "DRAM timing"
1640 default FB_CARMINE_DRAM_EVAL
1641
1642config FB_CARMINE_DRAM_EVAL
1643 bool "Eval board timings"
1644 help
1645 Use timings which work on the eval card.
1646
1647config CARMINE_DRAM_CUSTOM
1648 bool "Custom board timings"
1649 help
1650 Use custom board timings.
1651endchoice
1652
Linus Torvalds1da177e2005-04-16 15:20:36 -07001653config FB_AU1100
1654 bool "Au1100 LCD Driver"
Ralf Baechled1709e42007-07-23 18:43:50 -07001655 depends on (FB = y) && MIPS && SOC_AU1100
1656 select FB_CFB_FILLRECT
1657 select FB_CFB_COPYAREA
1658 select FB_CFB_IMAGEBLIT
1659 help
1660 This is the framebuffer driver for the AMD Au1100 SOC. It can drive
1661 various panels and CRTs by passing in kernel cmd line option
1662 au1100fb:panel=<name>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001663
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001664config FB_AU1200
1665 bool "Au1200 LCD Driver"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001666 depends on (FB = y) && MIPS && SOC_AU1200
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001667 select FB_CFB_FILLRECT
1668 select FB_CFB_COPYAREA
1669 select FB_CFB_IMAGEBLIT
1670 help
1671 This is the framebuffer driver for the AMD Au1200 SOC. It can drive
1672 various panels and CRTs by passing in kernel cmd line option
1673 au1200fb:panel=<name>.
1674
Linus Torvalds1da177e2005-04-16 15:20:36 -07001675source "drivers/video/geode/Kconfig"
1676
Linus Torvalds1da177e2005-04-16 15:20:36 -07001677config FB_HIT
1678 tristate "HD64461 Frame Buffer support"
1679 depends on FB && HD64461
1680 select FB_CFB_FILLRECT
1681 select FB_CFB_COPYAREA
1682 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001683 help
1684 This is the frame buffer device driver for the Hitachi HD64461 LCD
1685 frame buffer card.
1686
1687config FB_PMAG_AA
1688 bool "PMAG-AA TURBOchannel framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001689 depends on (FB = y) && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001690 select FB_CFB_FILLRECT
1691 select FB_CFB_COPYAREA
1692 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001693 help
1694 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1695 used mainly in the MIPS-based DECstation series.
1696
1697config FB_PMAG_BA
Maciej W. Rozycki335dc502007-02-05 16:28:28 -08001698 tristate "PMAG-BA TURBOchannel framebuffer support"
1699 depends on FB && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001700 select FB_CFB_FILLRECT
1701 select FB_CFB_COPYAREA
1702 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001703 help
1704 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1705 used mainly in the MIPS-based DECstation series.
1706
1707config FB_PMAGB_B
Maciej W. Rozycki9084b002007-02-05 16:28:29 -08001708 tristate "PMAGB-B TURBOchannel framebuffer support"
Maciej W. Rozycki28ea28a2007-10-16 01:29:28 -07001709 depends on FB && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001710 select FB_CFB_FILLRECT
1711 select FB_CFB_COPYAREA
1712 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001713 help
1714 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1715 in the MIPS-based DECstation series. The card is currently only
1716 supported in 1280x1024x8 mode.
1717
1718config FB_MAXINE
1719 bool "Maxine (Personal DECstation) onboard framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001720 depends on (FB = y) && MACH_DECSTATION
Linus Torvalds1da177e2005-04-16 15:20:36 -07001721 select FB_CFB_FILLRECT
1722 select FB_CFB_COPYAREA
1723 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001724 help
1725 Support for the onboard framebuffer (1024x768x8) in the Personal
1726 DECstation series (Personal DECstation 5000/20, /25, /33, /50,
1727 Codename "Maxine").
1728
Linus Torvalds1da177e2005-04-16 15:20:36 -07001729config FB_G364
Yoichi Yuasab38817d2005-07-27 11:43:28 -07001730 bool "G364 frame buffer support"
1731 depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001732 select FB_CFB_FILLRECT
1733 select FB_CFB_COPYAREA
1734 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001735 help
1736 The G364 driver is the framebuffer used in MIPS Magnum 4000 and
1737 Olivetti M700-10 systems.
1738
1739config FB_68328
1740 bool "Motorola 68328 native frame buffer support"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001741 depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001742 select FB_CFB_FILLRECT
1743 select FB_CFB_COPYAREA
1744 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001745 help
1746 Say Y here if you want to support the built-in frame buffer of
1747 the Motorola 68328 CPU family.
1748
Lennert Buytenhek638772c2009-02-11 17:25:24 +08001749config FB_PXA168
1750 tristate "PXA168/910 LCD framebuffer support"
1751 depends on FB && (CPU_PXA168 || CPU_PXA910)
1752 select FB_CFB_FILLRECT
1753 select FB_CFB_COPYAREA
1754 select FB_CFB_IMAGEBLIT
1755 ---help---
1756 Frame buffer driver for the built-in LCD controller in the Marvell
1757 MMP processor.
1758
Linus Torvalds1da177e2005-04-16 15:20:36 -07001759config FB_PXA
1760 tristate "PXA LCD framebuffer support"
1761 depends on FB && ARCH_PXA
1762 select FB_CFB_FILLRECT
1763 select FB_CFB_COPYAREA
1764 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001765 ---help---
1766 Frame buffer driver for the built-in LCD controller in the Intel
1767 PXA2x0 processor.
1768
1769 This driver is also available as a module ( = code which can be
1770 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001771 module will be called pxafb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001772 say M here and read <file:Documentation/kbuild/modules.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001773
1774 If unsure, say N.
1775
Eric Miao198fc102008-12-23 17:49:43 +08001776config FB_PXA_OVERLAY
1777 bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
1778 default n
1779 depends on FB_PXA && (PXA27x || PXA3xx)
1780
Eric Miao3c42a442008-04-30 00:52:26 -07001781config FB_PXA_SMARTPANEL
1782 bool "PXA Smartpanel LCD support"
Eric Miao7f1133c2008-04-30 00:52:27 -07001783 default n
Eric Miao3c42a442008-04-30 00:52:26 -07001784 depends on FB_PXA
1785
Linus Torvalds1da177e2005-04-16 15:20:36 -07001786config FB_PXA_PARAMETERS
1787 bool "PXA LCD command line parameters"
1788 default n
1789 depends on FB_PXA
1790 ---help---
1791 Enable the use of kernel command line or module parameters
1792 to configure the physical properties of the LCD panel when
1793 using the PXA LCD driver.
1794
1795 This option allows you to override the panel parameters
1796 supplied by the platform in order to support multiple
1797 different models of flatpanel. If you will only be using a
1798 single model of flatpanel then you can safely leave this
1799 option disabled.
1800
1801 <file:Documentation/fb/pxafb.txt> describes the available parameters.
1802
Mike Rapoport22caf042006-07-14 00:24:34 -07001803config FB_MBX
1804 tristate "2700G LCD framebuffer support"
1805 depends on FB && ARCH_PXA
1806 select FB_CFB_FILLRECT
1807 select FB_CFB_COPYAREA
1808 select FB_CFB_IMAGEBLIT
1809 ---help---
1810 Framebuffer driver for the Intel 2700G (Marathon) Graphics
1811 Accelerator
1812
1813config FB_MBX_DEBUG
1814 bool "Enable debugging info via debugfs"
1815 depends on FB_MBX && DEBUG_FS
1816 default n
1817 ---help---
1818 Enable this if you want debugging information using the debug
1819 filesystem (debugfs)
1820
1821 If unsure, say N.
1822
York Sun9b53a9e2008-04-28 02:15:34 -07001823config FB_FSL_DIU
1824 tristate "Freescale DIU framebuffer support"
1825 depends on FB && FSL_SOC
1826 select FB_CFB_FILLRECT
1827 select FB_CFB_COPYAREA
1828 select FB_CFB_IMAGEBLIT
1829 select PPC_LIB_RHEAP
1830 ---help---
1831 Framebuffer driver for the Freescale SoC DIU
1832
Randy Dunlapecc41d52005-11-07 01:00:29 -08001833config FB_W100
1834 tristate "W100 frame buffer support"
Philipp Zabele5dd3cb2008-07-04 09:59:52 -07001835 depends on FB && ARCH_PXA
Randy Dunlapecc41d52005-11-07 01:00:29 -08001836 select FB_CFB_FILLRECT
1837 select FB_CFB_COPYAREA
1838 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -08001839 ---help---
1840 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
Philipp Zabele5dd3cb2008-07-04 09:59:52 -07001841 It can also drive the w3220 chip found on iPAQ hx4700.
Randy Dunlapecc41d52005-11-07 01:00:29 -08001842
1843 This driver is also available as a module ( = code which can be
1844 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001845 module will be called w100fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001846 say M here and read <file:Documentation/kbuild/modules.txt>.
Randy Dunlapecc41d52005-11-07 01:00:29 -08001847
1848 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001849
Magnus Dammcfb4f5d2008-07-23 21:31:24 -07001850config FB_SH_MOBILE_LCDC
1851 tristate "SuperH Mobile LCDC framebuffer support"
Paul Mundt727dc3f2009-07-07 10:30:02 +09001852 depends on FB && SUPERH && HAVE_CLK
Magnus Damm2540c112008-12-17 17:29:49 +09001853 select FB_SYS_FILLRECT
1854 select FB_SYS_COPYAREA
1855 select FB_SYS_IMAGEBLIT
1856 select FB_SYS_FOPS
Magnus Damm85645572008-12-19 15:34:41 +09001857 select FB_DEFERRED_IO
Magnus Dammcfb4f5d2008-07-23 21:31:24 -07001858 ---help---
1859 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1860
Dmitry Baryshkovb53cde32008-10-15 22:03:55 -07001861config FB_TMIO
1862 tristate "Toshiba Mobile IO FrameBuffer support"
1863 depends on FB && MFD_CORE
1864 select FB_CFB_FILLRECT
1865 select FB_CFB_COPYAREA
1866 select FB_CFB_IMAGEBLIT
1867 ---help---
1868 Frame buffer driver for the Toshiba Mobile IO integrated as found
1869 on the Sharp SL-6000 series
1870
1871 This driver is also available as a module ( = code which can be
1872 inserted and removed from the running kernel whenever you want). The
1873 module will be called tmiofb. If you want to compile it as a module,
1874 say M here and read <file:Documentation/kbuild/modules.txt>.
1875
1876 If unsure, say N.
1877
1878config FB_TMIO_ACCELL
1879 bool "tmiofb acceleration"
1880 depends on FB_TMIO
1881 default y
1882
Ben Dooksec549a02009-03-31 15:25:39 -07001883config FB_S3C
1884 tristate "Samsung S3C framebuffer support"
1885 depends on FB && ARCH_S3C64XX
1886 select FB_CFB_FILLRECT
1887 select FB_CFB_COPYAREA
1888 select FB_CFB_IMAGEBLIT
1889 ---help---
1890 Frame buffer driver for the built-in FB controller in the Samsung
1891 SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
1892 and the S3C64XX series such as the S3C6400 and S3C6410.
1893
1894 These chips all have the same basic framebuffer design with the
1895 actual capabilities depending on the chip. For instance the S3C6400
1896 and S3C6410 support 4 hardware windows whereas the S3C24XX series
1897 currently only have two.
1898
1899 Currently the support is only for the S3C6400 and S3C6410 SoCs.
1900
1901config FB_S3C_DEBUG_REGWRITE
1902 bool "Debug register writes"
1903 depends on FB_S3C
1904 ---help---
1905 Show all register writes via printk(KERN_DEBUG)
1906
Arnaud Patard20fd5762005-09-09 13:10:07 -07001907config FB_S3C2410
1908 tristate "S3C2410 LCD framebuffer support"
1909 depends on FB && ARCH_S3C2410
1910 select FB_CFB_FILLRECT
1911 select FB_CFB_COPYAREA
1912 select FB_CFB_IMAGEBLIT
Arnaud Patard20fd5762005-09-09 13:10:07 -07001913 ---help---
1914 Frame buffer driver for the built-in LCD controller in the Samsung
1915 S3C2410 processor.
1916
1917 This driver is also available as a module ( = code which can be
1918 inserted and removed from the running kernel whenever you want). The
1919 module will be called s3c2410fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001920 say M here and read <file:Documentation/kbuild/modules.txt>.
Arnaud Patard20fd5762005-09-09 13:10:07 -07001921
1922 If unsure, say N.
1923config FB_S3C2410_DEBUG
1924 bool "S3C2410 lcd debug messages"
1925 depends on FB_S3C2410
1926 help
1927 Turn on debugging messages. Note that you can set/unset at run time
1928 through sysfs
1929
Ben Dooks5fc404e2007-02-20 13:58:21 -08001930config FB_SM501
1931 tristate "Silicon Motion SM501 framebuffer support"
1932 depends on FB && MFD_SM501
1933 select FB_CFB_FILLRECT
1934 select FB_CFB_COPYAREA
1935 select FB_CFB_IMAGEBLIT
1936 ---help---
1937 Frame buffer driver for the CRT and LCD controllers in the Silicon
1938 Motion SM501.
1939
1940 This driver is also available as a module ( = code which can be
1941 inserted and removed from the running kernel whenever you want). The
1942 module will be called sm501fb. If you want to compile it as a module,
Dirk Hohndele4031492007-10-30 13:37:19 -07001943 say M here and read <file:Documentation/kbuild/modules.txt>.
Ben Dooks5fc404e2007-02-20 13:58:21 -08001944
1945 If unsure, say N.
1946
1947
Vitaly Wool36c93662006-07-03 00:24:19 -07001948config FB_PNX4008_DUM
1949 tristate "Display Update Module support on Philips PNX4008 board"
1950 depends on FB && ARCH_PNX4008
1951 ---help---
1952 Say Y here to enable support for PNX4008 Display Update Module (DUM)
1953
1954config FB_PNX4008_DUM_RGB
1955 tristate "RGB Framebuffer support on Philips PNX4008 board"
1956 depends on FB_PNX4008_DUM
1957 select FB_CFB_FILLRECT
1958 select FB_CFB_COPYAREA
1959 select FB_CFB_IMAGEBLIT
1960 ---help---
1961 Say Y here to enable support for PNX4008 RGB Framebuffer
1962
Paul Mackerrasa3d89982006-12-10 02:20:42 -08001963config FB_IBM_GXT4500
1964 tristate "Framebuffer support for IBM GXT4500P adaptor"
Randy Dunlap0058f472007-10-16 01:29:35 -07001965 depends on FB && PPC
Paul Mackerrasa3d89982006-12-10 02:20:42 -08001966 select FB_CFB_FILLRECT
1967 select FB_CFB_COPYAREA
1968 select FB_CFB_IMAGEBLIT
1969 ---help---
1970 Say Y here to enable support for the IBM GXT4500P display
1971 adaptor, found on some IBM System P (pSeries) machines.
1972
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001973config FB_PS3
Geert Uytterhoeven9e6b99b2007-06-16 08:05:38 +10001974 tristate "PS3 GPU framebuffer driver"
1975 depends on FB && PS3_PS3AV
Geert Uytterhoeven92c45792007-05-23 13:57:50 -07001976 select FB_SYS_FILLRECT
1977 select FB_SYS_COPYAREA
1978 select FB_SYS_IMAGEBLIT
1979 select FB_SYS_FOPS
Geert Uytterhoeven23e9c942007-07-21 04:37:49 -07001980 select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001981 ---help---
1982 Include support for the virtual frame buffer in the PS3 platform.
1983
1984config FB_PS3_DEFAULT_SIZE_M
1985 int "PS3 default frame buffer size (in MiB)"
1986 depends on FB_PS3
Geert Uytterhoeven50b25292007-07-21 04:37:50 -07001987 default 9
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001988 ---help---
1989 This is the default size (in MiB) of the virtual frame buffer in
1990 the PS3.
1991 The default value can be overridden on the kernel command line
1992 using the "ps3fb" option (e.g. "ps3fb=9M");
1993
Andrei Konovalov147394c2007-05-08 00:40:18 -07001994config FB_XILINX
1995 tristate "Xilinx frame buffer support"
Michal Simek6fa612b2009-05-11 15:49:12 +02001996 depends on FB && (XILINX_VIRTEX || MICROBLAZE)
Andrei Konovalov147394c2007-05-08 00:40:18 -07001997 select FB_CFB_FILLRECT
1998 select FB_CFB_COPYAREA
1999 select FB_CFB_IMAGEBLIT
2000 ---help---
2001 Include support for the Xilinx ML300/ML403 reference design
2002 framebuffer. ML300 carries a 640*480 LCD display on the board,
2003 ML403 uses a standard DB15 VGA connector.
2004
Yoichi Yuasa5abe3b42008-07-23 21:31:40 -07002005config FB_COBALT
2006 tristate "Cobalt server LCD frame buffer support"
2007 depends on FB && MIPS_COBALT
2008
Nobuhiro Iwamatsu4a25e412008-07-23 21:31:46 -07002009config FB_SH7760
Nobuhiro Iwamatsu5c72f302008-11-21 14:35:29 +09002010 bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
2011 depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
2012 || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
2013 select FB_CFB_FILLRECT
2014 select FB_CFB_COPYAREA
2015 select FB_CFB_IMAGEBLIT
2016 ---help---
2017 Support for the SH7760/SH7763/SH7720/SH7721 integrated
2018 (D)STN/TFT LCD Controller.
2019 Supports display resolutions up to 1024x1024 pixel, grayscale and
2020 color operation, with depths ranging from 1 bpp to 8 bpp monochrome
2021 and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
2022 panels <= 320 pixel horizontal resolution.
Nobuhiro Iwamatsu4a25e412008-07-23 21:31:46 -07002023
Sudhakar Rajashekhara4ed824d2009-09-22 16:47:06 -07002024config FB_DA8XX
2025 tristate "DA8xx/OMAP-L1xx Framebuffer support"
2026 depends on FB && ARCH_DAVINCI_DA8XX
2027 select FB_CFB_FILLRECT
2028 select FB_CFB_COPYAREA
2029 select FB_CFB_IMAGEBLIT
2030 ---help---
2031 This is the frame buffer device driver for the TI LCD controller
2032 found on DA8xx/OMAP-L1xx SoCs.
2033 If unsure, say N.
2034
Linus Torvalds1da177e2005-04-16 15:20:36 -07002035config FB_VIRTUAL
2036 tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
2037 depends on FB
Antonino A. Daplas87b48842007-05-08 00:39:01 -07002038 select FB_SYS_FILLRECT
2039 select FB_SYS_COPYAREA
2040 select FB_SYS_IMAGEBLIT
Antonino A. Daplas52102c02007-05-08 00:39:07 -07002041 select FB_SYS_FOPS
Linus Torvalds1da177e2005-04-16 15:20:36 -07002042 ---help---
2043 This is a `virtual' frame buffer device. It operates on a chunk of
2044 unswappable kernel memory instead of on the memory of a graphics
2045 board. This means you cannot see any output sent to this frame
2046 buffer device, while it does consume precious memory. The main use
2047 of this frame buffer device is testing and debugging the frame
2048 buffer subsystem. Do NOT enable it for normal systems! To protect
2049 the innocent, it has to be enabled explicitly at boot time using the
2050 kernel option `video=vfb:'.
2051
2052 To compile this driver as a module, choose M here: the
Mike Frysinger66cf7512006-10-03 01:14:41 -07002053 module will be called vfb. In order to load it, you must use
2054 the vfb_enable=1 option.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002055
2056 If unsure, say N.
James Simmonse0e34ef2007-02-10 14:15:43 +00002057
Markus Armbruster4ee36dc2008-04-02 10:54:07 -07002058config XEN_FBDEV_FRONTEND
2059 tristate "Xen virtual frame buffer support"
2060 depends on FB && XEN
2061 select FB_SYS_FILLRECT
2062 select FB_SYS_COPYAREA
2063 select FB_SYS_IMAGEBLIT
2064 select FB_SYS_FOPS
2065 select FB_DEFERRED_IO
2066 default y
2067 help
2068 This driver implements the front-end of the Xen virtual
2069 frame buffer driver. It communicates with a back-end
2070 in another domain.
2071
Jaya Kumare9355082008-08-19 11:17:55 +01002072config FB_METRONOME
2073 tristate "E-Ink Metronome/8track controller support"
2074 depends on FB
2075 select FB_SYS_FILLRECT
2076 select FB_SYS_COPYAREA
2077 select FB_SYS_IMAGEBLIT
2078 select FB_SYS_FOPS
2079 select FB_DEFERRED_IO
2080 help
2081 This driver implements support for the E-Ink Metronome
2082 controller. The pre-release name for this device was 8track
2083 and could also have been called by some vendors as PVI-nnnn.
2084
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002085config FB_MB862XX
2086 tristate "Fujitsu MB862xx GDC support"
2087 depends on FB
2088 select FB_CFB_FILLRECT
2089 select FB_CFB_COPYAREA
2090 select FB_CFB_IMAGEBLIT
2091 ---help---
2092 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
2093
2094config FB_MB862XX_PCI_GDC
2095 bool "Carmine/Coral-P(A) GDC"
2096 depends on PCI && FB_MB862XX
2097 ---help---
2098 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
2099 PCI graphics controller devices.
2100
2101config FB_MB862XX_LIME
2102 bool "Lime GDC"
2103 depends on FB_MB862XX
2104 depends on OF && !FB_MB862XX_PCI_GDC
Julian Calaby336e7472009-06-16 15:34:29 -07002105 depends on PPC
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002106 select FB_FOREIGN_ENDIAN
2107 select FB_LITTLE_ENDIAN
2108 ---help---
2109 Framebuffer support for Fujitsu Lime GDC on host CPU bus.
2110
Ryan Mallon88017bd2009-09-22 16:47:09 -07002111config FB_EP93XX
2112 tristate "EP93XX frame buffer support"
2113 depends on FB && ARCH_EP93XX
2114 select FB_CFB_FILLRECT
2115 select FB_CFB_COPYAREA
2116 select FB_CFB_IMAGEBLIT
2117 ---help---
2118 Framebuffer driver for the Cirrus Logic EP93XX series of processors.
2119 This driver is also available as a module. The module will be called
2120 ep93xx-fb.
2121
Anatolij Gustschin17a12172008-11-06 12:53:29 -08002122config FB_PRE_INIT_FB
2123 bool "Don't reinitialize, use bootloader's GDC/Display configuration"
2124 depends on FB_MB862XX_LIME
2125 ---help---
2126 Select this option if display contents should be inherited as set by
2127 the bootloader.
2128
Pavel Machekd480ace2009-09-22 16:47:03 -07002129config FB_MSM
2130 tristate
2131 depends on FB && ARCH_MSM
2132 select FB_CFB_FILLRECT
2133 select FB_CFB_COPYAREA
2134 select FB_CFB_IMAGEBLIT
2135 default y
2136
Guennadi Liakhovetski86528da2009-01-21 10:32:34 -07002137config FB_MX3
Guennadi Liakhovetski6e1588c2009-02-26 21:34:28 +01002138 tristate "MX3 Framebuffer support"
2139 depends on FB && MX3_IPU
2140 select FB_CFB_FILLRECT
2141 select FB_CFB_COPYAREA
2142 select FB_CFB_IMAGEBLIT
2143 default y
2144 help
2145 This is a framebuffer device for the i.MX31 LCD Controller. So
2146 far only synchronous displays are supported. If you plan to use
2147 an LCD display with your i.MX31 system, say Y here.
Guennadi Liakhovetski86528da2009-01-21 10:32:34 -07002148
Jaya Kumar0d4ff4d2009-01-01 17:49:19 +01002149config FB_BROADSHEET
2150 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
2151 depends on FB
2152 select FB_SYS_FILLRECT
2153 select FB_SYS_COPYAREA
2154 select FB_SYS_IMAGEBLIT
2155 select FB_SYS_FOPS
2156 select FB_DEFERRED_IO
2157 help
2158 This driver implements support for the E-Ink Broadsheet
2159 controller. The release name for this device was Epson S1D13521
2160 and could also have been called by other names when coupled with
2161 a bridge adapter.
2162
Randy Dunlapf08f3892007-10-29 14:37:16 -07002163source "drivers/video/omap/Kconfig"
Randy Dunlap0058f472007-10-16 01:29:35 -07002164
Randy Dunlap179b0252007-10-16 01:29:39 -07002165source "drivers/video/backlight/Kconfig"
2166source "drivers/video/display/Kconfig"
2167
Linus Torvalds1da177e2005-04-16 15:20:36 -07002168if VT
2169 source "drivers/video/console/Kconfig"
2170endif
2171
2172if FB || SGI_NEWPORT_CONSOLE
2173 source "drivers/video/logo/Kconfig"
2174endif
2175
Linus Torvalds1da177e2005-04-16 15:20:36 -07002176endmenu