drivers/irqchip/Kconfig

config IRQCHIP
	def_bool y
	depends on OF_IRQ

config ARM_GIC
	bool
	select IRQ_DOMAIN
	select IRQ_DOMAIN_HIERARCHY
	select MULTI_IRQ_HANDLER

config ARM_GIC_PM
	bool
	depends on PM
	select ARM_GIC
	select PM_CLK

config ARM_GIC_MAX_NR
	int
	default 2 if ARCH_REALVIEW
	default 1

config ARM_GIC_V2M
	bool
	depends on PCI
	select ARM_GIC
	select PCI_MSI

config GIC_NON_BANKED
	bool

config ARM_GIC_V3
	bool
	select IRQ_DOMAIN
	select MULTI_IRQ_HANDLER
	select IRQ_DOMAIN_HIERARCHY
	select PARTITION_PERCPU
	select QCOM_SHOW_RESUME_IRQ

config ARM_GIC_V3_ITS
	bool
	depends on PCI
	depends on PCI_MSI
	select ACPI_IORT if ACPI

config ARM_GIC_V3_ACL
	bool "GICv3 Access control"
	depends on ARM_GIC_V3
	help
	  Access to GIC ITS address space is controlled by EL2.
	  Kernel has no permission to access GIC ITS address space.
	  If you wish to enforce the Acces control then set this
	  option to Y, if you are unsure please say N.

config ARM_NVIC
	bool
	select IRQ_DOMAIN
	select IRQ_DOMAIN_HIERARCHY
	select GENERIC_IRQ_CHIP

config ARM_VIC
	bool
	select IRQ_DOMAIN
	select MULTI_IRQ_HANDLER

config ARM_VIC_NR
	int
	default 4 if ARCH_S5PV210
	default 2
	depends on ARM_VIC
	help
	  The maximum number of VICs available in the system, for
	  power management.

config ARMADA_370_XP_IRQ
	bool
	select GENERIC_IRQ_CHIP
	select PCI_MSI if PCI

config ALPINE_MSI
	bool
	depends on PCI
	select PCI_MSI
	select GENERIC_IRQ_CHIP

config ATMEL_AIC_IRQ
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN
	select MULTI_IRQ_HANDLER
	select SPARSE_IRQ

config ATMEL_AIC5_IRQ
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN
	select MULTI_IRQ_HANDLER
	select SPARSE_IRQ

config I8259
	bool
	select IRQ_DOMAIN

config BCM6345_L1_IRQ
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config BCM7038_L1_IRQ
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config BCM7120_L2_IRQ
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config BRCMSTB_L2_IRQ
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config QCOM_SHOW_RESUME_IRQ
	bool "Enable logging of interrupts that could have caused resume"
	depends on ARM_GIC
	default n
	help
	  This option logs wake up interrupts that have triggered just before
	  the resume loop unrolls. It helps to debug to know any unnecessary
	  wake up interrupts that causes system to come out of low power modes.
	  Say Y if you want to debug why the system resumed.

config DW_APB_ICTL
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config HISILICON_IRQ_MBIGEN
	bool
	select ARM_GIC_V3
	select ARM_GIC_V3_ITS

config IMGPDC_IRQ
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config IRQ_MIPS_CPU
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config CLPS711X_IRQCHIP
	bool
	depends on ARCH_CLPS711X
	select IRQ_DOMAIN
	select MULTI_IRQ_HANDLER
	select SPARSE_IRQ
	default y

config OR1K_PIC
	bool
	select IRQ_DOMAIN

config OMAP_IRQCHIP
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config ORION_IRQCHIP
	bool
	select IRQ_DOMAIN
	select MULTI_IRQ_HANDLER

config PIC32_EVIC
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config JCORE_AIC
	bool "J-Core integrated AIC" if COMPILE_TEST
	depends on OF
	select IRQ_DOMAIN
	help
	  Support for the J-Core integrated AIC.

config RENESAS_INTC_IRQPIN
	bool
	select IRQ_DOMAIN

config RENESAS_IRQC
	bool
	select GENERIC_IRQ_CHIP
	select IRQ_DOMAIN

config ST_IRQCHIP
	bool
	select REGMAP
	select MFD_SYSCON
	help
	  Enables SysCfg Controlled IRQs on STi based platforms.

config TANGO_IRQ
	bool
	select IRQ_DOMAIN
	select GENERIC_IRQ_CHIP

config TB10X_IRQC
	bool
	select IRQ_DOMAIN
	select GENERIC_IRQ_CHIP

config TS4800_IRQ
	tristate "TS-4800 IRQ controller"
	select IRQ_DOMAIN
	depends on HAS_IOMEM
	depends on SOC_IMX51 || COMPILE_TEST
	help
	  Support for the TS-4800 FPGA IRQ controller

config VERSATILE_FPGA_IRQ
	bool
	select IRQ_DOMAIN

config VERSATILE_FPGA_IRQ_NR
       int
       default 4
       depends on VERSATILE_FPGA_IRQ

config XTENSA_MX
	bool
	select IRQ_DOMAIN

config IRQ_CROSSBAR
	bool
	help
	  Support for a CROSSBAR ip that precedes the main interrupt controller.
	  The primary irqchip invokes the crossbar's callback which inturn allocates
	  a free irq and configures the IP. Thus the peripheral interrupts are
	  routed to one of the free irqchip interrupt lines.

config KEYSTONE_IRQ
	tristate "Keystone 2 IRQ controller IP"
	depends on ARCH_KEYSTONE
	help
		Support for Texas Instruments Keystone 2 IRQ controller IP which
		is part of the Keystone 2 IPC mechanism

config MIPS_GIC
	bool
	select GENERIC_IRQ_IPI
	select IRQ_DOMAIN_HIERARCHY
	select MIPS_CM

config INGENIC_IRQ
	bool
	depends on MACH_INGENIC
	default y

config RENESAS_H8300H_INTC
        bool
	select IRQ_DOMAIN

config RENESAS_H8S_INTC
        bool
	select IRQ_DOMAIN

config IMX_GPCV2
	bool
	select IRQ_DOMAIN
	help
	  Enables the wakeup IRQs for IMX platforms with GPCv2 block

config IRQ_MXS
	def_bool y if MACH_ASM9260 || ARCH_MXS
	select IRQ_DOMAIN
	select STMP_DEVICE

config MVEBU_ODMI
	bool

config MVEBU_PIC
	bool

config LS_SCFG_MSI
	def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
	depends on PCI && PCI_MSI

config PARTITION_PERCPU
	bool

config EZNPS_GIC
	bool "NPS400 Global Interrupt Manager (GIM)"
	depends on ARC || (COMPILE_TEST && !64BIT)
	select IRQ_DOMAIN
	help
	  Support the EZchip NPS400 global interrupt controller

config STM32_EXTI
	bool
	select IRQ_DOMAIN

source "drivers/irqchip/qcom/Kconfig"