tests/layer_validation_tests.cpp

/*
 * Copyright (c) 2015-2016 The Khronos Group Inc.
 * Copyright (c) 2015-2016 Valve Corporation
 * Copyright (c) 2015-2016 LunarG, Inc.
 * Copyright (c) 2015-2016 Google, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Author: Chia-I Wu <olvaffe@gmail.com>
 * Author: Chris Forbes <chrisf@ijw.co.nz>
 * Author: Courtney Goeltzenleuchter <courtney@LunarG.com>
 * Author: Mark Lobodzinski <mark@lunarg.com>
 * Author: Mike Stroyan <mike@LunarG.com>
 * Author: Tobin Ehlis <tobine@google.com>
 * Author: Tony Barbour <tony@LunarG.com>
 */

#ifdef ANDROID
#include "vulkan_wrapper.h"
#else
#include <vulkan/vulkan.h>
#endif
#include "test_common.h"
#include "vkrenderframework.h"
#include "vk_layer_config.h"
#include "icd-spv.h"

#define GLM_FORCE_RADIANS
#include "glm/glm.hpp"
#include <glm/gtc/matrix_transform.hpp>

#define PARAMETER_VALIDATION_TESTS 1
#define MEM_TRACKER_TESTS 1
#define OBJ_TRACKER_TESTS 1
#define DRAW_STATE_TESTS 1
#define THREADING_TESTS 1
#define SHADER_CHECKER_TESTS 1
#define DEVICE_LIMITS_TESTS 1
#define IMAGE_TESTS 1

//--------------------------------------------------------------------------------------
// Mesh and VertexFormat Data
//--------------------------------------------------------------------------------------
struct Vertex {
    float posX, posY, posZ, posW; // Position data
    float r, g, b, a;             // Color
};

#define XYZ1(_x_, _y_, _z_) (_x_), (_y_), (_z_), 1.f

typedef enum _BsoFailSelect {
    BsoFailNone = 0x00000000,
    BsoFailLineWidth = 0x00000001,
    BsoFailDepthBias = 0x00000002,
    BsoFailViewport = 0x00000004,
    BsoFailScissor = 0x00000008,
    BsoFailBlend = 0x00000010,
    BsoFailDepthBounds = 0x00000020,
    BsoFailStencilReadMask = 0x00000040,
    BsoFailStencilWriteMask = 0x00000080,
    BsoFailStencilReference = 0x00000100,
    BsoFailCmdClearAttachments = 0x00000200,
} BsoFailSelect;

struct vktriangle_vs_uniform {
    // Must start with MVP
    float mvp[4][4];
    float position[3][4];
    float color[3][4];
};

static const char bindStateVertShaderText[] =
    "#version 450\n"
    "vec2 vertices[3];\n"
    "out gl_PerVertex {\n"
    "    vec4 gl_Position;\n"
    "};\n"
    "void main() {\n"
    "      vertices[0] = vec2(-1.0, -1.0);\n"
    "      vertices[1] = vec2( 1.0, -1.0);\n"
    "      vertices[2] = vec2( 0.0,  1.0);\n"
    "   gl_Position = vec4(vertices[gl_VertexIndex % 3], 0.0, 1.0);\n"
    "}\n";

static const char bindStateFragShaderText[] =
    "#version 450\n"
    "\n"
    "layout(location = 0) out vec4 uFragColor;\n"
    "void main(){\n"
    "   uFragColor = vec4(0,1,0,1);\n"
    "}\n";

static VKAPI_ATTR VkBool32 VKAPI_CALL
myDbgFunc(VkFlags msgFlags, VkDebugReportObjectTypeEXT objType,
          uint64_t srcObject, size_t location, int32_t msgCode,
          const char *pLayerPrefix, const char *pMsg, void *pUserData);

// ********************************************************
// ErrorMonitor Usage:
//
// Call SetDesiredFailureMsg with a string to be compared against all
// encountered log messages. Passing NULL will match all log messages.
// logMsg will return true for skipCall only if msg is matched or NULL.
//
// Call DesiredMsgFound to determine if the desired failure message
// was encountered.

class ErrorMonitor {
  public:
    ErrorMonitor() {
        test_platform_thread_create_mutex(&m_mutex);
        test_platform_thread_lock_mutex(&m_mutex);
        m_msgFlags = VK_DEBUG_REPORT_INFORMATION_BIT_EXT;
        m_bailout = NULL;
        test_platform_thread_unlock_mutex(&m_mutex);
    }

    ~ErrorMonitor() { test_platform_thread_delete_mutex(&m_mutex); }

    void SetDesiredFailureMsg(VkFlags msgFlags, const char *msgString) {
        // also discard all collected messages to this point
        test_platform_thread_lock_mutex(&m_mutex);
        m_failureMsg.clear();
        m_otherMsgs.clear();
        m_desiredMsg = msgString;
        m_msgFound = VK_FALSE;
        m_msgFlags = msgFlags;
        test_platform_thread_unlock_mutex(&m_mutex);
    }

    VkBool32 CheckForDesiredMsg(VkFlags msgFlags, const char *msgString) {
        VkBool32 result = VK_FALSE;
        test_platform_thread_lock_mutex(&m_mutex);
        if (m_bailout != NULL) {
            *m_bailout = true;
        }
        string errorString(msgString);
        if (msgFlags & m_msgFlags) {
            if (errorString.find(m_desiredMsg) != string::npos) {
                if (m_msgFound) { /* if multiple matches, don't lose all but the last! */
                    m_otherMsgs.push_back(m_failureMsg);
                }
                m_failureMsg = errorString;
                m_msgFound = VK_TRUE;
                result = VK_TRUE;
            } else {
                m_otherMsgs.push_back(errorString);
            }
        }
        test_platform_thread_unlock_mutex(&m_mutex);
        return result;
    }

    vector<string> GetOtherFailureMsgs(void) { return m_otherMsgs; }

    string GetFailureMsg(void) { return m_failureMsg; }

    VkBool32 DesiredMsgFound(void) { return m_msgFound; }

    void SetBailout(bool *bailout) { m_bailout = bailout; }

    void DumpFailureMsgs(void) {
        vector<string> otherMsgs = GetOtherFailureMsgs();
        cout << "Other error messages logged for this test were:" << endl;
        for (auto iter = otherMsgs.begin(); iter != otherMsgs.end(); iter++) {
            cout << "     " << *iter << endl;
        }
    }

    /* helpers */

    void ExpectSuccess() {
        // match anything
        SetDesiredFailureMsg(~0u, "");
    }

    void VerifyFound() {
        // Not seeing the desired message is a failure. /Before/ throwing, dump
        // any other messages.
        if (!DesiredMsgFound()) {
            DumpFailureMsgs();
            FAIL() << "Did not receive expected error '" << m_desiredMsg << "'";
        }
    }

    void VerifyNotFound() {
        // ExpectSuccess() configured us to match anything. Any error is a
        // failure.
        if (DesiredMsgFound()) {
            DumpFailureMsgs();
            FAIL() << "Expected to succeed but got error: " << GetFailureMsg();
        }
    }

  private:
    VkFlags m_msgFlags;
    string m_desiredMsg;
    string m_failureMsg;
    vector<string> m_otherMsgs;
    test_platform_thread_mutex m_mutex;
    bool *m_bailout;
    VkBool32 m_msgFound;
};

static VKAPI_ATTR VkBool32 VKAPI_CALL
myDbgFunc(VkFlags msgFlags, VkDebugReportObjectTypeEXT objType,
          uint64_t srcObject, size_t location, int32_t msgCode,
          const char *pLayerPrefix, const char *pMsg, void *pUserData) {
    if (msgFlags &
        (VK_DEBUG_REPORT_WARNING_BIT_EXT | VK_DEBUG_REPORT_PERFORMANCE_WARNING_BIT_EXT |
         VK_DEBUG_REPORT_ERROR_BIT_EXT)) {
        ErrorMonitor *errMonitor = (ErrorMonitor *)pUserData;
        return errMonitor->CheckForDesiredMsg(msgFlags, pMsg);
    }
    return false;
}

class VkLayerTest : public VkRenderFramework {
  public:
    VkResult BeginCommandBuffer(VkCommandBufferObj &commandBuffer);
    VkResult EndCommandBuffer(VkCommandBufferObj &commandBuffer);
    void VKTriangleTest(const char *vertShaderText, const char *fragShaderText,
                        BsoFailSelect failMask);
    void GenericDrawPreparation(VkCommandBufferObj *commandBuffer,
                                VkPipelineObj &pipelineobj,
                                VkDescriptorSetObj &descriptorSet,
                                BsoFailSelect failMask);
    void GenericDrawPreparation(VkPipelineObj &pipelineobj,
                                VkDescriptorSetObj &descriptorSet,
                                BsoFailSelect failMask) {
        GenericDrawPreparation(m_commandBuffer, pipelineobj, descriptorSet,
                               failMask);
    }

    /* Convenience functions that use built-in command buffer */
    VkResult BeginCommandBuffer() {
        return BeginCommandBuffer(*m_commandBuffer);
    }
    VkResult EndCommandBuffer() { return EndCommandBuffer(*m_commandBuffer); }
    void Draw(uint32_t vertexCount, uint32_t instanceCount,
              uint32_t firstVertex, uint32_t firstInstance) {
        m_commandBuffer->Draw(vertexCount, instanceCount, firstVertex,
                              firstInstance);
    }
    void DrawIndexed(uint32_t indexCount, uint32_t instanceCount,
                     uint32_t firstIndex, int32_t vertexOffset,
                     uint32_t firstInstance) {
        m_commandBuffer->DrawIndexed(indexCount, instanceCount, firstIndex,
                                     vertexOffset, firstInstance);
    }
    void QueueCommandBuffer() { m_commandBuffer->QueueCommandBuffer(); }
    void QueueCommandBuffer(const VkFence &fence) {
        m_commandBuffer->QueueCommandBuffer(fence);
    }
    void BindVertexBuffer(VkConstantBufferObj *vertexBuffer,
                          VkDeviceSize offset, uint32_t binding) {
        m_commandBuffer->BindVertexBuffer(vertexBuffer, offset, binding);
    }
    void BindIndexBuffer(VkIndexBufferObj *indexBuffer, VkDeviceSize offset) {
        m_commandBuffer->BindIndexBuffer(indexBuffer, offset);
    }

  protected:
    ErrorMonitor *m_errorMonitor;
    bool m_enableWSI;

    virtual void SetUp() {
        std::vector<const char *> instance_layer_names;
        std::vector<const char *> device_layer_names;
        std::vector<const char *> instance_extension_names;
        std::vector<const char *> device_extension_names;

        instance_extension_names.push_back(VK_EXT_DEBUG_REPORT_EXTENSION_NAME);
        /*
         * Since CreateDbgMsgCallback is an instance level extension call
         * any extension / layer that utilizes that feature also needs
         * to be enabled at create instance time.
         */
        // Use Threading layer first to protect others from
        // ThreadCommandBufferCollision test
        instance_layer_names.push_back("VK_LAYER_GOOGLE_threading");
        instance_layer_names.push_back("VK_LAYER_LUNARG_parameter_validation");
        instance_layer_names.push_back("VK_LAYER_LUNARG_object_tracker");
        instance_layer_names.push_back("VK_LAYER_LUNARG_core_validation");
        instance_layer_names.push_back("VK_LAYER_LUNARG_device_limits");
        instance_layer_names.push_back("VK_LAYER_LUNARG_image");
        instance_layer_names.push_back("VK_LAYER_LUNARG_swapchain");
        instance_layer_names.push_back("VK_LAYER_GOOGLE_unique_objects");

        device_layer_names.push_back("VK_LAYER_GOOGLE_threading");
        device_layer_names.push_back("VK_LAYER_LUNARG_parameter_validation");
        device_layer_names.push_back("VK_LAYER_LUNARG_object_tracker");
        device_layer_names.push_back("VK_LAYER_LUNARG_core_validation");
        device_layer_names.push_back("VK_LAYER_LUNARG_device_limits");
        device_layer_names.push_back("VK_LAYER_LUNARG_image");
        device_layer_names.push_back("VK_LAYER_LUNARG_swapchain");
        device_layer_names.push_back("VK_LAYER_GOOGLE_unique_objects");

        if (m_enableWSI) {
            instance_extension_names.push_back(VK_KHR_SURFACE_EXTENSION_NAME);
            device_extension_names.push_back(VK_KHR_SWAPCHAIN_EXTENSION_NAME);
#ifdef NEED_TO_TEST_THIS_ON_PLATFORM
#if defined(VK_USE_PLATFORM_ANDROID_KHR)
            instance_extension_names.push_back(VK_KHR_ANDROID_SURFACE_EXTENSION_NAME);
#endif // VK_USE_PLATFORM_ANDROID_KHR
#if defined(VK_USE_PLATFORM_MIR_KHR)
            instance_extension_names.push_back(VK_KHR_MIR_SURFACE_EXTENSION_NAME);
#endif // VK_USE_PLATFORM_MIR_KHR
#if defined(VK_USE_PLATFORM_WAYLAND_KHR)
            instance_extension_names.push_back(VK_KHR_WAYLAND_SURFACE_EXTENSION_NAME);
#endif // VK_USE_PLATFORM_WAYLAND_KHR
#if defined(VK_USE_PLATFORM_WIN32_KHR)
            instance_extension_names.push_back(VK_KHR_WIN32_SURFACE_EXTENSION_NAME);
#endif // VK_USE_PLATFORM_WIN32_KHR
#endif // NEED_TO_TEST_THIS_ON_PLATFORM
#if defined(VK_USE_PLATFORM_XCB_KHR)
            instance_extension_names.push_back(VK_KHR_XCB_SURFACE_EXTENSION_NAME);
#elif defined(VK_USE_PLATFORM_XLIB_KHR)
            instance_extension_names.push_back(VK_KHR_XLIB_SURFACE_EXTENSION_NAME);
#endif // VK_USE_PLATFORM_XLIB_KHR
        }

        this->app_info.sType = VK_STRUCTURE_TYPE_APPLICATION_INFO;
        this->app_info.pNext = NULL;
        this->app_info.pApplicationName = "layer_tests";
        this->app_info.applicationVersion = 1;
        this->app_info.pEngineName = "unittest";
        this->app_info.engineVersion = 1;
        this->app_info.apiVersion = VK_API_VERSION_1_0;

        m_errorMonitor = new ErrorMonitor;
        InitFramework(instance_layer_names, device_layer_names,
                      instance_extension_names, device_extension_names,
                      myDbgFunc, m_errorMonitor);
    }

    virtual void TearDown() {
        // Clean up resources before we reset
        ShutdownFramework();
        delete m_errorMonitor;
    }

    VkLayerTest() {
        m_enableWSI = false;
    }
};

VkResult VkLayerTest::BeginCommandBuffer(VkCommandBufferObj &commandBuffer) {
    VkResult result;

    result = commandBuffer.BeginCommandBuffer();

    /*
     * For render test all drawing happens in a single render pass
     * on a single command buffer.
     */
    if (VK_SUCCESS == result && renderPass()) {
        commandBuffer.BeginRenderPass(renderPassBeginInfo());
    }

    return result;
}

VkResult VkLayerTest::EndCommandBuffer(VkCommandBufferObj &commandBuffer) {
    VkResult result;

    if (renderPass()) {
        commandBuffer.EndRenderPass();
    }

    result = commandBuffer.EndCommandBuffer();

    return result;
}

void VkLayerTest::VKTriangleTest(const char *vertShaderText,
                                 const char *fragShaderText,
                                 BsoFailSelect failMask) {
    // Create identity matrix
    int i;
    struct vktriangle_vs_uniform data;

    glm::mat4 Projection = glm::mat4(1.0f);
    glm::mat4 View = glm::mat4(1.0f);
    glm::mat4 Model = glm::mat4(1.0f);
    glm::mat4 MVP = Projection * View * Model;
    const int matrixSize = sizeof(MVP);
    const int bufSize = sizeof(vktriangle_vs_uniform) / sizeof(float);

    memcpy(&data.mvp, &MVP[0][0], matrixSize);

    static const Vertex tri_data[] = {
        {XYZ1(-1, -1, 0), XYZ1(1.f, 0.f, 0.f)},
        {XYZ1(1, -1, 0), XYZ1(0.f, 1.f, 0.f)},
        {XYZ1(0, 1, 0), XYZ1(0.f, 0.f, 1.f)},
    };

    for (i = 0; i < 3; i++) {
        data.position[i][0] = tri_data[i].posX;
        data.position[i][1] = tri_data[i].posY;
        data.position[i][2] = tri_data[i].posZ;
        data.position[i][3] = tri_data[i].posW;
        data.color[i][0] = tri_data[i].r;
        data.color[i][1] = tri_data[i].g;
        data.color[i][2] = tri_data[i].b;
        data.color[i][3] = tri_data[i].a;
    }

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitViewport());

    VkConstantBufferObj constantBuffer(m_device, bufSize * 2, sizeof(float),
                                       (const void *)&data);

    VkShaderObj vs(m_device, vertShaderText, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj ps(m_device, fragShaderText, VK_SHADER_STAGE_FRAGMENT_BIT,
                   this);

    VkPipelineObj pipelineobj(m_device);
    pipelineobj.AddColorAttachment();
    pipelineobj.AddShader(&vs);
    pipelineobj.AddShader(&ps);
    if (failMask & BsoFailLineWidth) {
        pipelineobj.MakeDynamic(VK_DYNAMIC_STATE_LINE_WIDTH);
        VkPipelineInputAssemblyStateCreateInfo ia_state = {};
        ia_state.sType =
            VK_STRUCTURE_TYPE_PIPELINE_INPUT_ASSEMBLY_STATE_CREATE_INFO;
        ia_state.topology = VK_PRIMITIVE_TOPOLOGY_LINE_LIST;
        pipelineobj.SetInputAssembly(&ia_state);
    }
    if (failMask & BsoFailDepthBias) {
        pipelineobj.MakeDynamic(VK_DYNAMIC_STATE_DEPTH_BIAS);
        VkPipelineRasterizationStateCreateInfo rs_state = {};
        rs_state.sType =
            VK_STRUCTURE_TYPE_PIPELINE_RASTERIZATION_STATE_CREATE_INFO;
        rs_state.depthBiasEnable = VK_TRUE;
        rs_state.lineWidth = 1.0f;
        pipelineobj.SetRasterization(&rs_state);
    }
    // Viewport and scissors must stay in synch or other errors will occur than
    // the ones we want
    if (failMask & BsoFailViewport) {
        pipelineobj.MakeDynamic(VK_DYNAMIC_STATE_VIEWPORT);
        m_viewports.clear();
        m_scissors.clear();
    }
    if (failMask & BsoFailScissor) {
        pipelineobj.MakeDynamic(VK_DYNAMIC_STATE_SCISSOR);
        m_scissors.clear();
        m_viewports.clear();
    }
    if (failMask & BsoFailBlend) {
        pipelineobj.MakeDynamic(VK_DYNAMIC_STATE_BLEND_CONSTANTS);
        VkPipelineColorBlendAttachmentState att_state = {};
        att_state.dstAlphaBlendFactor = VK_BLEND_FACTOR_CONSTANT_COLOR;
        att_state.blendEnable = VK_TRUE;
        pipelineobj.AddColorAttachment(0, &att_state);
    }
    if (failMask & BsoFailDepthBounds) {
        pipelineobj.MakeDynamic(VK_DYNAMIC_STATE_DEPTH_BOUNDS);
    }
    if (failMask & BsoFailStencilReadMask) {
        pipelineobj.MakeDynamic(VK_DYNAMIC_STATE_STENCIL_COMPARE_MASK);
    }
    if (failMask & BsoFailStencilWriteMask) {
        pipelineobj.MakeDynamic(VK_DYNAMIC_STATE_STENCIL_WRITE_MASK);
    }
    if (failMask & BsoFailStencilReference) {
        pipelineobj.MakeDynamic(VK_DYNAMIC_STATE_STENCIL_REFERENCE);
    }

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendBuffer(VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER,
                               constantBuffer);

    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());
    ASSERT_VK_SUCCESS(BeginCommandBuffer());

    GenericDrawPreparation(pipelineobj, descriptorSet, failMask);

    // render triangle
    Draw(3, 1, 0, 0);

    if (failMask & BsoFailCmdClearAttachments) {
        VkClearAttachment color_attachment = {};
        color_attachment.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
        color_attachment.colorAttachment = 1; // Someone who knew what they were doing would use 0 for the index;
        VkClearRect clear_rect = {{{0, 0}, {static_cast<uint32_t>(m_width), static_cast<uint32_t>(m_height)}}, 0, 0};

        vkCmdClearAttachments(m_commandBuffer->GetBufferHandle(), 1,
                              &color_attachment, 1, &clear_rect);
    }

    // finalize recording of the command buffer
    EndCommandBuffer();

    QueueCommandBuffer();
}

void VkLayerTest::GenericDrawPreparation(VkCommandBufferObj *commandBuffer,
                                         VkPipelineObj &pipelineobj,
                                         VkDescriptorSetObj &descriptorSet,
                                         BsoFailSelect failMask) {
    if (m_depthStencil->Initialized()) {
        commandBuffer->ClearAllBuffers(m_clear_color, m_depth_clear_color,
                                       m_stencil_clear_color, m_depthStencil);
    } else {
        commandBuffer->ClearAllBuffers(m_clear_color, m_depth_clear_color,
                                       m_stencil_clear_color, NULL);
    }

    commandBuffer->PrepareAttachments();
    // Make sure depthWriteEnable is set so that Depth fail test will work
    // correctly
    // Make sure stencilTestEnable is set so that Stencil fail test will work
    // correctly
    VkStencilOpState stencil = {};
    stencil.failOp = VK_STENCIL_OP_KEEP;
    stencil.passOp = VK_STENCIL_OP_KEEP;
    stencil.depthFailOp = VK_STENCIL_OP_KEEP;
    stencil.compareOp = VK_COMPARE_OP_NEVER;

    VkPipelineDepthStencilStateCreateInfo ds_ci = {};
    ds_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_DEPTH_STENCIL_STATE_CREATE_INFO;
    ds_ci.pNext = NULL;
    ds_ci.depthTestEnable = VK_FALSE;
    ds_ci.depthWriteEnable = VK_TRUE;
    ds_ci.depthCompareOp = VK_COMPARE_OP_NEVER;
    ds_ci.depthBoundsTestEnable = VK_FALSE;
    if (failMask & BsoFailDepthBounds) {
        ds_ci.depthBoundsTestEnable = VK_TRUE;
        ds_ci.maxDepthBounds = 0.0f;
        ds_ci.minDepthBounds = 0.0f;
    }
    ds_ci.stencilTestEnable = VK_TRUE;
    ds_ci.front = stencil;
    ds_ci.back = stencil;

    pipelineobj.SetDepthStencil(&ds_ci);
    pipelineobj.SetViewport(m_viewports);
    pipelineobj.SetScissor(m_scissors);
    descriptorSet.CreateVKDescriptorSet(commandBuffer);
    VkResult err = pipelineobj.CreateVKPipeline(
        descriptorSet.GetPipelineLayout(), renderPass());
    ASSERT_VK_SUCCESS(err);
    commandBuffer->BindPipeline(pipelineobj);
    commandBuffer->BindDescriptorSet(descriptorSet);
}

class VkWsiEnabledLayerTest : public VkLayerTest {
  public:
protected:
    VkWsiEnabledLayerTest() {
        m_enableWSI = true;
    }
};

// ********************************************************************************************************************
// ********************************************************************************************************************
// ********************************************************************************************************************
// ********************************************************************************************************************
#if PARAMETER_VALIDATION_TESTS
TEST_F(VkLayerTest, RequiredParameter) {
    TEST_DESCRIPTION("Specify VK_NULL_HANDLE, NULL, and 0 for required handle, "
                     "pointer, array, and array count parameters");

    ASSERT_NO_FATAL_FAILURE(InitState());

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "required parameter pFeatures specified as NULL");
    // Specify NULL for a pointer to a handle
    // Expected to trigger an error with
    // parameter_validation::validate_required_pointer
    vkGetPhysicalDeviceFeatures(gpu(), NULL);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "required parameter pQueueFamilyPropertyCount specified as NULL");
    // Specify NULL for pointer to array count
    // Expected to trigger an error with parameter_validation::validate_array
    vkGetPhysicalDeviceQueueFamilyProperties(gpu(), NULL, NULL);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "parameter viewportCount must be greater than 0");
    // Specify 0 for a required array count
    // Expected to trigger an error with parameter_validation::validate_array
    VkViewport view_port = {};
    m_commandBuffer->SetViewport(0, 0, &view_port);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "required parameter pViewports specified as NULL");
    // Specify NULL for a required array
    // Expected to trigger an error with parameter_validation::validate_array
    m_commandBuffer->SetViewport(0, 1, NULL);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "required parameter memory specified as VK_NULL_HANDLE");
    // Specify VK_NULL_HANDLE for a required handle
    // Expected to trigger an error with
    // parameter_validation::validate_required_handle
    vkUnmapMemory(device(), VK_NULL_HANDLE);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "required parameter pFences[0] specified as VK_NULL_HANDLE");
    // Specify VK_NULL_HANDLE for a required handle array entry
    // Expected to trigger an error with
    // parameter_validation::validate_required_handle_array
    VkFence fence = VK_NULL_HANDLE;
    vkResetFences(device(), 1, &fence);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "required parameter pAllocateInfo specified as NULL");
    // Specify NULL for a required struct pointer
    // Expected to trigger an error with
    // parameter_validation::validate_struct_type
    VkDeviceMemory memory = VK_NULL_HANDLE;
    vkAllocateMemory(device(), NULL, NULL, &memory);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "value of faceMask must not be 0");
    // Specify 0 for a required VkFlags parameter
    // Expected to trigger an error with parameter_validation::validate_flags
    m_commandBuffer->SetStencilReference(0, 0);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "value of pSubmits[i].pWaitDstStageMask[0] must not be 0");
    // Specify 0 for a required VkFlags array entry
    // Expected to trigger an error with
    // parameter_validation::validate_flags_array
    VkSemaphore semaphore = VK_NULL_HANDLE;
    VkPipelineStageFlags stageFlags = 0;
    VkSubmitInfo submitInfo = {};
    submitInfo.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
    submitInfo.waitSemaphoreCount = 1;
    submitInfo.pWaitSemaphores = &semaphore;
    submitInfo.pWaitDstStageMask = &stageFlags;
    vkQueueSubmit(m_device->m_queue, 1, &submitInfo, VK_NULL_HANDLE);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, ReservedParameter) {
    TEST_DESCRIPTION("Specify a non-zero value for a reserved parameter");

    ASSERT_NO_FATAL_FAILURE(InitState());

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         " must be 0");
    // Specify 0 for a reserved VkFlags parameter
    // Expected to trigger an error with
    // parameter_validation::validate_reserved_flags
    VkEvent event_handle = VK_NULL_HANDLE;
    VkEventCreateInfo event_info = {};
    event_info.sType = VK_STRUCTURE_TYPE_EVENT_CREATE_INFO;
    event_info.flags = 1;
    vkCreateEvent(device(), &event_info, NULL, &event_handle);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, InvalidStructSType) {
    TEST_DESCRIPTION("Specify an invalid VkStructureType for a Vulkan "
                     "structure's sType field");

    ASSERT_NO_FATAL_FAILURE(InitState());

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "parameter pAllocateInfo->sType must be");
    // Zero struct memory, effectively setting sType to
    // VK_STRUCTURE_TYPE_APPLICATION_INFO
    // Expected to trigger an error with
    // parameter_validation::validate_struct_type
    VkMemoryAllocateInfo alloc_info = {};
    VkDeviceMemory memory = VK_NULL_HANDLE;
    vkAllocateMemory(device(), &alloc_info, NULL, &memory);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "parameter pSubmits[0].sType must be");
    // Zero struct memory, effectively setting sType to
    // VK_STRUCTURE_TYPE_APPLICATION_INFO
    // Expected to trigger an error with
    // parameter_validation::validate_struct_type_array
    VkSubmitInfo submit_info = {};
    vkQueueSubmit(m_device->m_queue, 1, &submit_info, VK_NULL_HANDLE);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, InvalidStructPNext) {
    TEST_DESCRIPTION(
        "Specify an invalid value for a Vulkan structure's pNext field");

    ASSERT_NO_FATAL_FAILURE(InitState());

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "value of pAllocateInfo->pNext must be NULL");
    // Set VkMemoryAllocateInfo::pNext to a non-NULL value, when pNext must be
    // NULL
    // Expected to trigger an error with
    // parameter_validation::validate_struct_pnext
    VkDeviceMemory memory = VK_NULL_HANDLE;
    // Zero-initialization will provide the correct sType
    VkApplicationInfo app_info = {};
    VkMemoryAllocateInfo memory_alloc_info = {};
    memory_alloc_info.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    memory_alloc_info.pNext = &app_info;
    vkAllocateMemory(device(), &memory_alloc_info, NULL, &memory);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " chain includes a structure with unexpected VkStructureType ");
    // Set VkGraphicsPipelineCreateInfo::VkPipelineRasterizationStateCreateInfo::pNext to an invalid structure, when pNext is allowed to be a non-NULL value
    // Expected to trigger an error with
    // parameter_validation::validate_struct_pnext
    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    VkResult err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
        &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo ds_alloc_info = {};
    ds_alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    ds_alloc_info.descriptorSetCount = 1;
    ds_alloc_info.descriptorPool = ds_pool;
    ds_alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &ds_alloc_info,
        &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.setLayoutCount = 1;
    pipeline_layout_ci.pSetLayouts = &ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
        &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    VkViewport vp = {}; // Just need dummy vp to point to
    VkRect2D sc = {};   // dummy scissor to point to

    VkPipelineViewportStateCreateInfo vp_state_ci = {};
    vp_state_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_VIEWPORT_STATE_CREATE_INFO;
    vp_state_ci.scissorCount = 1;
    vp_state_ci.pScissors = &sc;
    vp_state_ci.viewportCount = 1;
    vp_state_ci.pViewports = &vp;

    VkPipelineRasterizationStateCreateInfo rs_state_ci = {};
    rs_state_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_RASTERIZATION_STATE_CREATE_INFO;
    rs_state_ci.polygonMode = VK_POLYGON_MODE_FILL;
    rs_state_ci.cullMode = VK_CULL_MODE_BACK_BIT;
    rs_state_ci.frontFace = VK_FRONT_FACE_COUNTER_CLOCKWISE;
    rs_state_ci.depthClampEnable = VK_FALSE;
    rs_state_ci.rasterizerDiscardEnable = VK_FALSE;
    rs_state_ci.depthBiasEnable = VK_FALSE;

    VkGraphicsPipelineCreateInfo gp_ci = {};
    gp_ci.sType = VK_STRUCTURE_TYPE_GRAPHICS_PIPELINE_CREATE_INFO;
    gp_ci.pViewportState = &vp_state_ci;
    gp_ci.pRasterizationState = &rs_state_ci;
    gp_ci.flags = VK_PIPELINE_CREATE_DISABLE_OPTIMIZATION_BIT;
    gp_ci.layout = pipeline_layout;
    gp_ci.renderPass = renderPass();

    VkPipelineCacheCreateInfo pc_ci = {};
    pc_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_CACHE_CREATE_INFO;
    pc_ci.initialDataSize = 0;
    pc_ci.pInitialData = 0;

    VkPipeline pipeline;
    VkPipelineCache pipelineCache;

    err =
        vkCreatePipelineCache(m_device->device(), &pc_ci, NULL, &pipelineCache);
    ASSERT_VK_SUCCESS(err);

    // Set VkPipelineRasterizationStateCreateInfo::pNext to an invalid value
    VkApplicationInfo invalid_pnext_struct = {};
    rs_state_ci.pNext = &invalid_pnext_struct;

    vkCreateGraphicsPipelines(m_device->device(), pipelineCache, 1,
        &gp_ci, NULL, &pipeline);
    m_errorMonitor->VerifyFound();
    vkDestroyPipelineCache(m_device->device(), pipelineCache, NULL);
    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);

}

TEST_F(VkLayerTest, UnrecognizedValue) {
    TEST_DESCRIPTION(
        "Specify unrecognized Vulkan enumeration, flags, and VkBool32 values");

    ASSERT_NO_FATAL_FAILURE(InitState());

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "does not fall within the begin..end "
                                         "range of the core VkFormat "
                                         "enumeration tokens");
    // Specify an invalid VkFormat value
    // Expected to trigger an error with
    // parameter_validation::validate_ranged_enum
    VkFormatProperties format_properties;
    vkGetPhysicalDeviceFormatProperties(gpu(), static_cast<VkFormat>(8000),
        &format_properties);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "contains flag bits that are not recognized members of");
    // Specify an invalid VkFlags bitmask value
    // Expected to trigger an error with parameter_validation::validate_flags
    VkImageFormatProperties image_format_properties;
    vkGetPhysicalDeviceImageFormatProperties(
        gpu(), VK_FORMAT_R8G8B8A8_UNORM, VK_IMAGE_TYPE_2D,
        VK_IMAGE_TILING_OPTIMAL, static_cast<VkImageUsageFlags>(1 << 25), 0,
        &image_format_properties);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "contains flag bits that are not recognized members of");
    // Specify an invalid VkFlags array entry
    // Expected to trigger an error with
    // parameter_validation::validate_flags_array
    VkSemaphore semaphore = VK_NULL_HANDLE;
    VkPipelineStageFlags stage_flags =
        static_cast<VkPipelineStageFlags>(1 << 25);
    VkSubmitInfo submit_info = {};
    submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
    submit_info.waitSemaphoreCount = 1;
    submit_info.pWaitSemaphores = &semaphore;
    submit_info.pWaitDstStageMask = &stage_flags;
    vkQueueSubmit(m_device->m_queue, 1, &submit_info, VK_NULL_HANDLE);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_WARNING_BIT_EXT,
                                         "is neither VK_TRUE nor VK_FALSE");
    // Specify an invalid VkBool32 value
    // Expected to trigger a warning with
    // parameter_validation::validate_bool32
    VkSampler sampler = VK_NULL_HANDLE;
    VkSamplerCreateInfo sampler_info = {};
    sampler_info.sType = VK_STRUCTURE_TYPE_SAMPLER_CREATE_INFO;
    sampler_info.pNext = NULL;
    sampler_info.magFilter = VK_FILTER_NEAREST;
    sampler_info.minFilter = VK_FILTER_NEAREST;
    sampler_info.mipmapMode = VK_SAMPLER_MIPMAP_MODE_NEAREST;
    sampler_info.addressModeU = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_info.addressModeV = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_info.addressModeW = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_info.mipLodBias = 1.0;
    sampler_info.maxAnisotropy = 1;
    sampler_info.compareEnable = VK_FALSE;
    sampler_info.compareOp = VK_COMPARE_OP_NEVER;
    sampler_info.minLod = 1.0;
    sampler_info.maxLod = 1.0;
    sampler_info.borderColor = VK_BORDER_COLOR_FLOAT_OPAQUE_WHITE;
    sampler_info.unnormalizedCoordinates = VK_FALSE;
    // Not VK_TRUE or VK_FALSE
    sampler_info.anisotropyEnable = 3;
    vkCreateSampler(m_device->device(), &sampler_info, NULL, &sampler);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, FailedReturnValue) {
    TEST_DESCRIPTION("Check for a message describing a VkResult failure code");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Find an unsupported image format
    VkFormat unsupported = VK_FORMAT_UNDEFINED;
    for (int f = VK_FORMAT_BEGIN_RANGE; f <= VK_FORMAT_END_RANGE; f++) {
        VkFormat format = static_cast<VkFormat>(f);
        VkFormatProperties fProps = m_device->format_properties(format);
        if (format != VK_FORMAT_UNDEFINED && fProps.linearTilingFeatures == 0 &&
            fProps.optimalTilingFeatures == 0) {
            unsupported = format;
            break;
        }
    }

    if (unsupported != VK_FORMAT_UNDEFINED) {
        m_errorMonitor->SetDesiredFailureMsg(
            VK_DEBUG_REPORT_WARNING_BIT_EXT,
            "the requested format is not supported on this device");
        // Specify an unsupported VkFormat value to generate a
        // VK_ERROR_FORMAT_NOT_SUPPORTED return code
        // Expected to trigger a warning from
        // parameter_validation::validate_result
        VkImageFormatProperties image_format_properties;
        VkResult err = vkGetPhysicalDeviceImageFormatProperties(
            gpu(), unsupported, VK_IMAGE_TYPE_2D, VK_IMAGE_TILING_OPTIMAL,
            VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT, 0, &image_format_properties);
        ASSERT_TRUE(err == VK_ERROR_FORMAT_NOT_SUPPORTED);
        m_errorMonitor->VerifyFound();
    }
}

TEST_F(VkLayerTest, UpdateBufferAlignment) {
    TEST_DESCRIPTION("Check alignment parameters for vkCmdUpdateBuffer");
    uint32_t updateData[] = { 1, 2, 3, 4, 5, 6, 7, 8 };

    ASSERT_NO_FATAL_FAILURE(InitState());

    VkMemoryPropertyFlags reqs = VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT;
    vk_testing::Buffer buffer;
    buffer.init_as_dst(*m_device, (VkDeviceSize)20, reqs);

    BeginCommandBuffer();
    // Introduce failure by using dstOffset that is not multiple of 4
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " is not a multiple of 4");
    m_commandBuffer->UpdateBuffer(buffer.handle(), 1, 4, updateData);
    m_errorMonitor->VerifyFound();

    // Introduce failure by using dataSize that is not multiple of 4
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " is not a multiple of 4");
    m_commandBuffer->UpdateBuffer(buffer.handle(), 0, 6, updateData);
    m_errorMonitor->VerifyFound();

    // Introduce failure by using dataSize that is < 0
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "must be greater than zero and less than or equal to 65536");
    m_commandBuffer->UpdateBuffer(buffer.handle(), 0, -44, updateData);
    m_errorMonitor->VerifyFound();

    // Introduce failure by using dataSize that is > 65536
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "must be greater than zero and less than or equal to 65536");
    m_commandBuffer->UpdateBuffer(buffer.handle(), 0, 80000, updateData);
    m_errorMonitor->VerifyFound();

    EndCommandBuffer();
}

TEST_F(VkLayerTest, FillBufferAlignment) {
    TEST_DESCRIPTION("Check alignment parameters for vkCmdFillBuffer");

    ASSERT_NO_FATAL_FAILURE(InitState());

    VkMemoryPropertyFlags reqs = VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT;
    vk_testing::Buffer buffer;
    buffer.init_as_dst(*m_device, (VkDeviceSize)20, reqs);

    BeginCommandBuffer();

    // Introduce failure by using dstOffset that is not multiple of 4
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " is not a multiple of 4");
    m_commandBuffer->FillBuffer(buffer.handle(), 1, 4, 0x11111111);
    m_errorMonitor->VerifyFound();

    // Introduce failure by using size that is not multiple of 4
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " is not a multiple of 4");
    m_commandBuffer->FillBuffer(buffer.handle(), 0, 6, 0x11111111);
    m_errorMonitor->VerifyFound();

    // Introduce failure by using size that is zero
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "must be greater than zero");
    m_commandBuffer->FillBuffer(buffer.handle(), 0, 0, 0x11111111);
    m_errorMonitor->VerifyFound();

    EndCommandBuffer();
}
#endif // PARAMETER_VALIDATION_TESTS

#if MEM_TRACKER_TESTS
#if 0
TEST_F(VkLayerTest, CallResetCommandBufferBeforeCompletion)
{
    vk_testing::Fence testFence;
    VkFenceCreateInfo fenceInfo = {};
    fenceInfo.sType = VK_STRUCTURE_TYPE_FENCE_CREATE_INFO;
    fenceInfo.pNext = NULL;
    fenceInfo.flags = 0;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT, "Resetting CB");

    ASSERT_NO_FATAL_FAILURE(InitState());

    VkMemoryPropertyFlags reqs = VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT;
    vk_testing::Buffer buffer;
    buffer.init_as_dst(*m_device, (VkDeviceSize)20, reqs);

    BeginCommandBuffer();
    m_commandBuffer->FillBuffer(buffer.handle(), 0, 4, 0x11111111);
    EndCommandBuffer();

    testFence.init(*m_device, fenceInfo);

    // Bypass framework since it does the waits automatically
    VkResult err = VK_SUCCESS;
    VkSubmitInfo submit_info;
    submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
    submit_info.pNext = NULL;
    submit_info.waitSemaphoreCount = 0;
    submit_info.pWaitSemaphores = NULL;
    submit_info.pWaitDstStageMask = NULL;
    submit_info.commandBufferCount = 1;
    submit_info.pCommandBuffers = &m_commandBuffer->handle();
    submit_info.signalSemaphoreCount = 0;
    submit_info.pSignalSemaphores = NULL;

    err = vkQueueSubmit( m_device->m_queue, 1, &submit_info, testFence.handle());
    ASSERT_VK_SUCCESS( err );

    // Introduce failure by calling begin again before checking fence
    vkResetCommandBuffer(m_commandBuffer->handle(), 0);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CallBeginCommandBufferBeforeCompletion)
{
    vk_testing::Fence testFence;
    VkFenceCreateInfo fenceInfo = {};
    fenceInfo.sType = VK_STRUCTURE_TYPE_FENCE_CREATE_INFO;
    fenceInfo.pNext = NULL;
    fenceInfo.flags = 0;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT, "Calling vkBeginCommandBuffer() on active CB");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitViewport());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    BeginCommandBuffer();
    m_commandBuffer->ClearAllBuffers(m_clear_color, m_depth_clear_color, m_stencil_clear_color, NULL);
    EndCommandBuffer();

    testFence.init(*m_device, fenceInfo);

    // Bypass framework since it does the waits automatically
    VkResult err = VK_SUCCESS;
    VkSubmitInfo submit_info;
    submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
    submit_info.pNext = NULL;
    submit_info.waitSemaphoreCount = 0;
    submit_info.pWaitSemaphores = NULL;
    submit_info.pWaitDstStageMask = NULL;
    submit_info.commandBufferCount = 1;
    submit_info.pCommandBuffers = &m_commandBuffer->handle();
    submit_info.signalSemaphoreCount = 0;
    submit_info.pSignalSemaphores = NULL;

    err = vkQueueSubmit( m_device->m_queue, 1, &submit_info, testFence.handle());
    ASSERT_VK_SUCCESS( err );

    VkCommandBufferInheritanceInfo hinfo = {};
    VkCommandBufferBeginInfo info = {};
    info.flags       = VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT;
    info.sType       = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
    info.renderPass  = VK_NULL_HANDLE;
    info.subpass     = 0;
    info.framebuffer = VK_NULL_HANDLE;
    info.occlusionQueryEnable = VK_FALSE;
    info.queryFlags = 0;
    info.pipelineStatistics = 0;

    // Introduce failure by calling BCB again before checking fence
    vkBeginCommandBuffer(m_commandBuffer->handle(), &info);

    m_errorMonitor->VerifyFound();
}
#endif

// This is a positive test. No failures are expected.
TEST_F(VkLayerTest, TestAliasedMemoryTracking) {
    VkResult err;
    bool pass;

    TEST_DESCRIPTION("Create a buffer, allocate memory, bind memory, destroy "
                     "the buffer, create an image, and bind the same memory to "
                     "it");

    m_errorMonitor->ExpectSuccess();

    ASSERT_NO_FATAL_FAILURE(InitState());

    VkBuffer buffer;
    VkImage image;
    VkDeviceMemory mem;
    VkMemoryRequirements mem_reqs;

    VkBufferCreateInfo buf_info = {};
    buf_info.sType = VK_STRUCTURE_TYPE_BUFFER_CREATE_INFO;
    buf_info.pNext = NULL;
    buf_info.usage = VK_BUFFER_USAGE_UNIFORM_BUFFER_BIT;
    buf_info.size = 256;
    buf_info.queueFamilyIndexCount = 0;
    buf_info.pQueueFamilyIndices = NULL;
    buf_info.sharingMode = VK_SHARING_MODE_EXCLUSIVE;
    buf_info.flags = 0;
    err = vkCreateBuffer(m_device->device(), &buf_info, NULL, &buffer);
    ASSERT_VK_SUCCESS(err);

    vkGetBufferMemoryRequirements(m_device->device(), buffer, &mem_reqs);

    VkMemoryAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    alloc_info.pNext = NULL;
    alloc_info.memoryTypeIndex = 0;

    // Ensure memory is big enough for both bindings
    alloc_info.allocationSize = 0x10000;

    pass = m_device->phy().set_memory_type(mem_reqs.memoryTypeBits, &alloc_info,
                                           VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT);
    if (!pass) {
        vkDestroyBuffer(m_device->device(), buffer, NULL);
        return;
    }

    err = vkAllocateMemory(m_device->device(), &alloc_info, NULL, &mem);
    ASSERT_VK_SUCCESS(err);

    uint8_t *pData;
    err = vkMapMemory(m_device->device(), mem, 0, mem_reqs.size, 0,
                      (void **)&pData);
    ASSERT_VK_SUCCESS(err);

    memset(pData, 0xCADECADE, static_cast<size_t>(mem_reqs.size));

    vkUnmapMemory(m_device->device(), mem);

    err = vkBindBufferMemory(m_device->device(), buffer, mem, 0);
    ASSERT_VK_SUCCESS(err);

    // NOW, destroy the buffer. Obviously, the resource no longer occupies this
    // memory. In fact, it was never used by the GPU.
    // Just be be sure, wait for idle.
    vkDestroyBuffer(m_device->device(), buffer, NULL);
    vkDeviceWaitIdle(m_device->device());

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = VK_FORMAT_R8G8B8A8_UNORM;
    image_create_info.extent.width = 64;
    image_create_info.extent.height = 64;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_LINEAR;
    image_create_info.initialLayout = VK_IMAGE_LAYOUT_PREINITIALIZED;
    image_create_info.usage = VK_IMAGE_USAGE_TRANSFER_SRC_BIT;
    image_create_info.queueFamilyIndexCount = 0;
    image_create_info.pQueueFamilyIndices = NULL;
    image_create_info.sharingMode = VK_SHARING_MODE_EXCLUSIVE;
    image_create_info.flags = 0;

    VkMemoryAllocateInfo mem_alloc = {};
    mem_alloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    mem_alloc.pNext = NULL;
    mem_alloc.allocationSize = 0;
    mem_alloc.memoryTypeIndex = 0;

    /* Create a mappable image.  It will be the texture if linear images are ok
    * to be textures or it will be the staging image if they are not.
    */
    err = vkCreateImage(m_device->device(), &image_create_info, NULL, &image);
    ASSERT_VK_SUCCESS(err);

    vkGetImageMemoryRequirements(m_device->device(), image, &mem_reqs);

    mem_alloc.allocationSize = mem_reqs.size;

    pass = m_device->phy().set_memory_type(mem_reqs.memoryTypeBits, &mem_alloc,
                                           VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT);
    if (!pass) {
        vkDestroyImage(m_device->device(), image, NULL);
        return;
    }

    // VALIDATION FAILURE:
    err = vkBindImageMemory(m_device->device(), image, mem, 0);
    ASSERT_VK_SUCCESS(err);

    m_errorMonitor->VerifyNotFound();

    vkFreeMemory(m_device->device(), mem, NULL);
    vkDestroyBuffer(m_device->device(), buffer, NULL);
    vkDestroyImage(m_device->device(), image, NULL);
}

TEST_F(VkLayerTest, InvalidMemoryAliasing) {
    TEST_DESCRIPTION("Create a buffer and image, allocate memory, and bind the "
                     "buffer and image to memory such that they will alias.");
    VkResult err;
    bool pass;
    ASSERT_NO_FATAL_FAILURE(InitState());

    VkBuffer buffer, buffer2;
    VkImage image;
    VkDeviceMemory mem;     // buffer will be bound first
    VkDeviceMemory mem_img; // image bound first
    VkMemoryRequirements buff_mem_reqs, img_mem_reqs;

    VkBufferCreateInfo buf_info = {};
    buf_info.sType = VK_STRUCTURE_TYPE_BUFFER_CREATE_INFO;
    buf_info.pNext = NULL;
    buf_info.usage = VK_BUFFER_USAGE_UNIFORM_BUFFER_BIT;
    buf_info.size = 256;
    buf_info.queueFamilyIndexCount = 0;
    buf_info.pQueueFamilyIndices = NULL;
    buf_info.sharingMode = VK_SHARING_MODE_EXCLUSIVE;
    buf_info.flags = 0;
    err = vkCreateBuffer(m_device->device(), &buf_info, NULL, &buffer);
    ASSERT_VK_SUCCESS(err);

    vkGetBufferMemoryRequirements(m_device->device(), buffer, &buff_mem_reqs);

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = VK_FORMAT_R8G8B8A8_UNORM;
    image_create_info.extent.width = 64;
    image_create_info.extent.height = 64;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_LINEAR;
    image_create_info.initialLayout = VK_IMAGE_LAYOUT_PREINITIALIZED;
    image_create_info.usage = VK_IMAGE_USAGE_TRANSFER_SRC_BIT;
    image_create_info.queueFamilyIndexCount = 0;
    image_create_info.pQueueFamilyIndices = NULL;
    image_create_info.sharingMode = VK_SHARING_MODE_EXCLUSIVE;
    image_create_info.flags = 0;

    err = vkCreateImage(m_device->device(), &image_create_info, NULL, &image);
    ASSERT_VK_SUCCESS(err);

    vkGetImageMemoryRequirements(m_device->device(), image, &img_mem_reqs);

    VkMemoryAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    alloc_info.pNext = NULL;
    alloc_info.memoryTypeIndex = 0;
    // Ensure memory is big enough for both bindings
    alloc_info.allocationSize = buff_mem_reqs.size + img_mem_reqs.size;
    pass = m_device->phy().set_memory_type(
        buff_mem_reqs.memoryTypeBits | img_mem_reqs.memoryTypeBits, &alloc_info,
        VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT);
    if (!pass) {
        vkDestroyBuffer(m_device->device(), buffer, NULL);
        vkDestroyImage(m_device->device(), image, NULL);
        return;
    }
    err = vkAllocateMemory(m_device->device(), &alloc_info, NULL, &mem);
    ASSERT_VK_SUCCESS(err);
    err = vkBindBufferMemory(m_device->device(), buffer, mem, 0);
    ASSERT_VK_SUCCESS(err);

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         " is aliased with buffer 0x");
    // VALIDATION FAILURE due to image mapping overlapping buffer mapping
    err = vkBindImageMemory(m_device->device(), image, mem, 0);
    m_errorMonitor->VerifyFound();

    // Now correctly bind image to second mem allocation before incorrectly
    // aliasing buffer2
    err = vkCreateBuffer(m_device->device(), &buf_info, NULL, &buffer2);
    ASSERT_VK_SUCCESS(err);
    err = vkAllocateMemory(m_device->device(), &alloc_info, NULL, &mem_img);
    ASSERT_VK_SUCCESS(err);
    err = vkBindImageMemory(m_device->device(), image, mem_img, 0);
    ASSERT_VK_SUCCESS(err);
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         " is aliased with image 0x");
    err = vkBindBufferMemory(m_device->device(), buffer2, mem_img, 0);
    m_errorMonitor->VerifyFound();

    vkDestroyBuffer(m_device->device(), buffer, NULL);
    vkDestroyBuffer(m_device->device(), buffer2, NULL);
    vkDestroyImage(m_device->device(), image, NULL);
    vkFreeMemory(m_device->device(), mem, NULL);
    vkFreeMemory(m_device->device(), mem_img, NULL);
}

TEST_F(VkLayerTest, InvalidMemoryMapping) {
    TEST_DESCRIPTION("Attempt to map memory in a number of incorrect ways");
    VkResult err;
    bool pass;
    ASSERT_NO_FATAL_FAILURE(InitState());

    VkBuffer buffer;
    VkDeviceMemory mem;
    VkMemoryRequirements mem_reqs;

    VkBufferCreateInfo buf_info = {};
    buf_info.sType = VK_STRUCTURE_TYPE_BUFFER_CREATE_INFO;
    buf_info.pNext = NULL;
    buf_info.usage = VK_BUFFER_USAGE_UNIFORM_BUFFER_BIT;
    buf_info.size = 256;
    buf_info.queueFamilyIndexCount = 0;
    buf_info.pQueueFamilyIndices = NULL;
    buf_info.sharingMode = VK_SHARING_MODE_EXCLUSIVE;
    buf_info.flags = 0;
    err = vkCreateBuffer(m_device->device(), &buf_info, NULL, &buffer);
    ASSERT_VK_SUCCESS(err);

    vkGetBufferMemoryRequirements(m_device->device(), buffer, &mem_reqs);
    VkMemoryAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    alloc_info.pNext = NULL;
    alloc_info.memoryTypeIndex = 0;

    // Ensure memory is big enough for both bindings
    static const VkDeviceSize allocation_size = 0x10000;
    alloc_info.allocationSize = allocation_size;
    pass = m_device->phy().set_memory_type(mem_reqs.memoryTypeBits, &alloc_info,
                                           VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT);
    if (!pass) {
        vkDestroyBuffer(m_device->device(), buffer, NULL);
        return;
    }
    err = vkAllocateMemory(m_device->device(), &alloc_info, NULL, &mem);
    ASSERT_VK_SUCCESS(err);

    uint8_t *pData;
    // Attempt to map memory size 0 is invalid
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "VkMapMemory: Attempting to map memory range of size zero");
    err = vkMapMemory(m_device->device(), mem, 0, 0, 0, (void **)&pData);
    m_errorMonitor->VerifyFound();
    // Map memory twice
    err = vkMapMemory(m_device->device(), mem, 0, mem_reqs.size, 0,
                      (void **)&pData);
    ASSERT_VK_SUCCESS(err);
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "VkMapMemory: Attempting to map memory on an already-mapped object ");
    err = vkMapMemory(m_device->device(), mem, 0, mem_reqs.size, 0,
                      (void **)&pData);
    m_errorMonitor->VerifyFound();

    // Unmap the memory to avoid re-map error
    vkUnmapMemory(m_device->device(), mem);
    // overstep allocation with VK_WHOLE_SIZE
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " with size of VK_WHOLE_SIZE oversteps total array size 0x");
    err = vkMapMemory(m_device->device(), mem, allocation_size + 1,
                      VK_WHOLE_SIZE, 0, (void **)&pData);
    m_errorMonitor->VerifyFound();
    // overstep allocation w/o VK_WHOLE_SIZE
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         " oversteps total array size 0x");
    err = vkMapMemory(m_device->device(), mem, 1, allocation_size, 0,
                      (void **)&pData);
    m_errorMonitor->VerifyFound();
    // Now error due to unmapping memory that's not mapped
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Unmapping Memory without memory being mapped: ");
    vkUnmapMemory(m_device->device(), mem);
    m_errorMonitor->VerifyFound();
    // Now map memory and cause errors due to flushing invalid ranges
    err = vkMapMemory(m_device->device(), mem, 16, VK_WHOLE_SIZE, 0,
                      (void **)&pData);
    ASSERT_VK_SUCCESS(err);
    VkMappedMemoryRange mmr = {};
    mmr.memory = mem;
    mmr.offset = 15; // Error b/c offset less than offset of mapped mem
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        ") is less than Memory Object's offset (");
    vkFlushMappedMemoryRanges(m_device->device(), 1, &mmr);
    m_errorMonitor->VerifyFound();
    // Now flush range that oversteps mapped range
    vkUnmapMemory(m_device->device(), mem);
    err = vkMapMemory(m_device->device(), mem, 0, 256, 0, (void **)&pData);
    ASSERT_VK_SUCCESS(err);
    mmr.offset = 16;
    mmr.size = 256; // flushing bounds (272) exceed mapped bounds (256)
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        ") exceeds the Memory Object's upper-bound (");
    vkFlushMappedMemoryRanges(m_device->device(), 1, &mmr);
    m_errorMonitor->VerifyFound();

    pass =
        m_device->phy().set_memory_type(mem_reqs.memoryTypeBits, &alloc_info,
                                        VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT,
                                        VK_MEMORY_PROPERTY_HOST_COHERENT_BIT);
    if (!pass) {
        vkFreeMemory(m_device->device(), mem, NULL);
        vkDestroyBuffer(m_device->device(), buffer, NULL);
        return;
    }
    // TODO : If we can get HOST_VISIBLE w/o HOST_COHERENT we can test cases of
    //  MEMTRACK_INVALID_MAP in validateAndCopyNoncoherentMemoryToDriver()

    vkDestroyBuffer(m_device->device(), buffer, NULL);
    vkFreeMemory(m_device->device(), mem, NULL);
}

TEST_F(VkLayerTest, EnableWsiBeforeUse) {
    VkResult err;
    bool pass;

// FIXME: After we turn on this code for non-Linux platforms, uncomment the
// following declaration (which is temporarily being moved below):
//    VkSurfaceKHR surface = VK_NULL_HANDLE;
    VkSwapchainKHR swapchain = VK_NULL_HANDLE;
    VkSwapchainCreateInfoKHR swapchain_create_info = {};
    uint32_t swapchain_image_count = 0;
//    VkImage swapchain_images[1] = {VK_NULL_HANDLE};
    uint32_t image_index = 0;
//    VkPresentInfoKHR present_info = {};

    ASSERT_NO_FATAL_FAILURE(InitState());

#ifdef NEED_TO_TEST_THIS_ON_PLATFORM
#if defined(VK_USE_PLATFORM_ANDROID_KHR)
    // Use the functions from the VK_KHR_android_surface extension without
    // enabling that extension:

    // Create a surface:
    VkAndroidSurfaceCreateInfoKHR android_create_info = {};
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    err = vkCreateAndroidSurfaceKHR(instance(), &android_create_info, NULL,
        &surface);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();
#endif // VK_USE_PLATFORM_ANDROID_KHR


#if defined(VK_USE_PLATFORM_MIR_KHR)
    // Use the functions from the VK_KHR_mir_surface extension without enabling
    // that extension:

    // Create a surface:
    VkMirSurfaceCreateInfoKHR mir_create_info = {};
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    err = vkCreateMirSurfaceKHR(instance(), &mir_create_info, NULL, &surface);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Tell whether an mir_connection supports presentation:
    MirConnection *mir_connection = NULL;
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    vkGetPhysicalDeviceMirPresentationSupportKHR(gpu(), 0, mir_connection,
        visual_id);
    m_errorMonitor->VerifyFound();
#endif // VK_USE_PLATFORM_MIR_KHR


#if defined(VK_USE_PLATFORM_WAYLAND_KHR)
    // Use the functions from the VK_KHR_wayland_surface extension without
    // enabling that extension:

    // Create a surface:
    VkWaylandSurfaceCreateInfoKHR wayland_create_info = {};
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    err = vkCreateWaylandSurfaceKHR(instance(), &wayland_create_info, NULL,
                                    &surface);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Tell whether an wayland_display supports presentation:
    struct wl_display wayland_display = {};
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    vkGetPhysicalDeviceWaylandPresentationSupportKHR(gpu(), 0,
                                                     &wayland_display);
    m_errorMonitor->VerifyFound();
#endif // VK_USE_PLATFORM_WAYLAND_KHR
#endif // NEED_TO_TEST_THIS_ON_PLATFORM


#if defined(VK_USE_PLATFORM_WIN32_KHR)
// FIXME: REMOVE THIS HERE, AND UNCOMMENT ABOVE, WHEN THIS TEST HAS BEEN PORTED
// TO NON-LINUX PLATFORMS:
VkSurfaceKHR surface = VK_NULL_HANDLE;
    // Use the functions from the VK_KHR_win32_surface extension without
    // enabling that extension:

    // Create a surface:
    VkWin32SurfaceCreateInfoKHR win32_create_info = {};
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    err = vkCreateWin32SurfaceKHR(instance(), &win32_create_info, NULL,
                                  &surface);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Tell whether win32 supports presentation:
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    vkGetPhysicalDeviceWin32PresentationSupportKHR(gpu(), 0);
    m_errorMonitor->VerifyFound();
// Set this (for now, until all platforms are supported and tested):
#define NEED_TO_TEST_THIS_ON_PLATFORM
#endif // VK_USE_PLATFORM_WIN32_KHR


#if defined(VK_USE_PLATFORM_XCB_KHR)
// FIXME: REMOVE THIS HERE, AND UNCOMMENT ABOVE, WHEN THIS TEST HAS BEEN PORTED
// TO NON-LINUX PLATFORMS:
VkSurfaceKHR surface = VK_NULL_HANDLE;
    // Use the functions from the VK_KHR_xcb_surface extension without enabling
    // that extension:

    // Create a surface:
    VkXcbSurfaceCreateInfoKHR xcb_create_info = {};
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    err = vkCreateXcbSurfaceKHR(instance(), &xcb_create_info, NULL, &surface);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Tell whether an xcb_visualid_t supports presentation:
    xcb_connection_t *xcb_connection = NULL;
    xcb_visualid_t visual_id = 0;
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    vkGetPhysicalDeviceXcbPresentationSupportKHR(gpu(), 0, xcb_connection,
        visual_id);
    m_errorMonitor->VerifyFound();
// Set this (for now, until all platforms are supported and tested):
#define NEED_TO_TEST_THIS_ON_PLATFORM
#endif // VK_USE_PLATFORM_XCB_KHR


#if defined(VK_USE_PLATFORM_XLIB_KHR)
    // Use the functions from the VK_KHR_xlib_surface extension without enabling
    // that extension:

    // Create a surface:
    VkXlibSurfaceCreateInfoKHR xlib_create_info = {};
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    err = vkCreateXlibSurfaceKHR(instance(), &xlib_create_info, NULL, &surface);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Tell whether an Xlib VisualID supports presentation:
    Display *dpy = NULL;
    VisualID visual = 0;
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    vkGetPhysicalDeviceXlibPresentationSupportKHR(gpu(), 0, dpy, visual);
    m_errorMonitor->VerifyFound();
// Set this (for now, until all platforms are supported and tested):
#define NEED_TO_TEST_THIS_ON_PLATFORM
#endif // VK_USE_PLATFORM_XLIB_KHR


    // Use the functions from the VK_KHR_surface extension without enabling
    // that extension:

#ifdef NEED_TO_TEST_THIS_ON_PLATFORM
    // Destroy a surface:
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    vkDestroySurfaceKHR(instance(), surface, NULL);
    m_errorMonitor->VerifyFound();

    // Check if surface supports presentation:
    VkBool32 supported = false;
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    err = vkGetPhysicalDeviceSurfaceSupportKHR(gpu(), 0, surface, &supported);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Check surface capabilities:
    VkSurfaceCapabilitiesKHR capabilities = {};
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    err = vkGetPhysicalDeviceSurfaceCapabilitiesKHR(gpu(), surface,
        &capabilities);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Check surface formats:
    uint32_t format_count = 0;
    VkSurfaceFormatKHR *formats = NULL;
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    err = vkGetPhysicalDeviceSurfaceFormatsKHR(gpu(), surface,
        &format_count, formats);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Check surface present modes:
    uint32_t present_mode_count = 0;
    VkSurfaceFormatKHR *present_modes = NULL;
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    err = vkGetPhysicalDeviceSurfaceFormatsKHR(gpu(), surface,
        &present_mode_count, present_modes);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();
#endif // NEED_TO_TEST_THIS_ON_PLATFORM


    // Use the functions from the VK_KHR_swapchain extension without enabling
    // that extension:

    // Create a swapchain:
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    swapchain_create_info.sType = VK_STRUCTURE_TYPE_SWAPCHAIN_CREATE_INFO_KHR;
    swapchain_create_info.pNext = NULL;
    err = vkCreateSwapchainKHR(m_device->device(), &swapchain_create_info,
                               NULL, &swapchain);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Get the images from the swapchain:
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    err = vkGetSwapchainImagesKHR(m_device->device(), swapchain,
                                  &swapchain_image_count, NULL);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Try to acquire an image:
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    err = vkAcquireNextImageKHR(m_device->device(), swapchain, 0,
                                VK_NULL_HANDLE, VK_NULL_HANDLE, &image_index);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Try to present an image:
    //
    // NOTE: Currently can't test this because a real swapchain is needed (as
    // opposed to the fake one we created) in order for the layer to lookup the
    // VkDevice used to enable the extension:

    // Destroy the swapchain:
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "extension was not enabled for this");
    vkDestroySwapchainKHR(m_device->device(), swapchain, NULL);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkWsiEnabledLayerTest, TestEnabledWsi) {

#if defined(VK_USE_PLATFORM_XCB_KHR)
    VkSurfaceKHR surface = VK_NULL_HANDLE;

    VkResult err;
    bool pass;
    VkSwapchainKHR swapchain = VK_NULL_HANDLE;
    VkSwapchainCreateInfoKHR swapchain_create_info = {};
    //    uint32_t swapchain_image_count = 0;
    //    VkImage swapchain_images[1] = {VK_NULL_HANDLE};
    //    uint32_t image_index = 0;
    //    VkPresentInfoKHR present_info = {};

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Use the create function from one of the VK_KHR_*_surface extension in
    // order to create a surface, testing all known errors in the process,
    // before successfully creating a surface:
    // First, try to create a surface without a VkXcbSurfaceCreateInfoKHR:
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "called with NULL pointer");
    err = vkCreateXcbSurfaceKHR(instance(), NULL, NULL, &surface);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Next, try to create a surface with the wrong
    // VkXcbSurfaceCreateInfoKHR::sType:
    VkXcbSurfaceCreateInfoKHR xcb_create_info = {};
    xcb_create_info.sType = VK_STRUCTURE_TYPE_APPLICATION_INFO;
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "called with the wrong value for");
    err = vkCreateXcbSurfaceKHR(instance(), &xcb_create_info, NULL, &surface);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Create a native window, and then correctly create a surface:
    xcb_connection_t *connection;
    xcb_screen_t *screen;
    xcb_window_t xcb_window;
    xcb_intern_atom_reply_t *atom_wm_delete_window;

    const xcb_setup_t *setup;
    xcb_screen_iterator_t iter;
    int scr;
    uint32_t value_mask, value_list[32];
    int width = 1;
    int height = 1;

    connection = xcb_connect(NULL, &scr);
    ASSERT_TRUE(connection != NULL);
    setup = xcb_get_setup(connection);
    iter = xcb_setup_roots_iterator(setup);
    while (scr-- > 0)
        xcb_screen_next(&iter);
    screen = iter.data;

    xcb_window = xcb_generate_id(connection);

    value_mask = XCB_CW_BACK_PIXEL | XCB_CW_EVENT_MASK;
    value_list[0] = screen->black_pixel;
    value_list[1] = XCB_EVENT_MASK_KEY_RELEASE | XCB_EVENT_MASK_EXPOSURE |
                    XCB_EVENT_MASK_STRUCTURE_NOTIFY;

    xcb_create_window(connection, XCB_COPY_FROM_PARENT, xcb_window,
                      screen->root, 0, 0, width, height, 0,
                      XCB_WINDOW_CLASS_INPUT_OUTPUT, screen->root_visual,
                      value_mask, value_list);

    /* Magic code that will send notification when window is destroyed */
    xcb_intern_atom_cookie_t cookie =
        xcb_intern_atom(connection, 1, 12, "WM_PROTOCOLS");
    xcb_intern_atom_reply_t *reply =
        xcb_intern_atom_reply(connection, cookie, 0);

    xcb_intern_atom_cookie_t cookie2 =
        xcb_intern_atom(connection, 0, 16, "WM_DELETE_WINDOW");
    atom_wm_delete_window = xcb_intern_atom_reply(connection, cookie2, 0);
    xcb_change_property(connection, XCB_PROP_MODE_REPLACE, xcb_window,
                        (*reply).atom, 4, 32, 1,
                        &(*atom_wm_delete_window).atom);
    free(reply);

    xcb_map_window(connection, xcb_window);

    // Force the x/y coordinates to 100,100 results are identical in consecutive
    // runs
    const uint32_t coords[] = {100, 100};
    xcb_configure_window(connection, xcb_window,
                         XCB_CONFIG_WINDOW_X | XCB_CONFIG_WINDOW_Y, coords);

    // Finally, try to correctly create a surface:
    xcb_create_info.sType = VK_STRUCTURE_TYPE_XCB_SURFACE_CREATE_INFO_KHR;
    xcb_create_info.pNext = NULL;
    xcb_create_info.flags = 0;
    xcb_create_info.connection = connection;
    xcb_create_info.window = xcb_window;
    err = vkCreateXcbSurfaceKHR(instance(), &xcb_create_info, NULL, &surface);
    pass = (err == VK_SUCCESS);
    ASSERT_TRUE(pass);

    // Check if surface supports presentation:

    // 1st, do so without having queried the queue families:
    VkBool32 supported = false;
    // TODO: Get the following error to come out:
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "called before calling the vkGetPhysicalDeviceQueueFamilyProperties "
        "function");
    err = vkGetPhysicalDeviceSurfaceSupportKHR(gpu(), 0, surface, &supported);
    pass = (err != VK_SUCCESS);
    //    ASSERT_TRUE(pass);
    //    m_errorMonitor->VerifyFound();

    // Next, query a queue family index that's too large:
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "called with a queueFamilyIndex that is too large");
    err = vkGetPhysicalDeviceSurfaceSupportKHR(gpu(), 100000, surface,
                                               &supported);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Finally, do so correctly:
    // FIXME: THIS ISN'T CORRECT--MUST QUERY UNTIL WE FIND A QUEUE FAMILY THAT'S
    // SUPPORTED
    err = vkGetPhysicalDeviceSurfaceSupportKHR(gpu(), 0, surface, &supported);
    pass = (err == VK_SUCCESS);
    ASSERT_TRUE(pass);

    // Before proceeding, try to create a swapchain without having called
    // vkGetPhysicalDeviceSurfaceCapabilitiesKHR():
    swapchain_create_info.sType = VK_STRUCTURE_TYPE_SWAPCHAIN_CREATE_INFO_KHR;
    swapchain_create_info.pNext = NULL;
    swapchain_create_info.flags = 0;
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "called before calling vkGetPhysicalDeviceSurfaceCapabilitiesKHR().");
    err = vkCreateSwapchainKHR(m_device->device(), &swapchain_create_info, NULL,
                               &swapchain);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Get the surface capabilities:
    VkSurfaceCapabilitiesKHR surface_capabilities;

    // Do so correctly (only error logged by this entrypoint is if the
    // extension isn't enabled):
    err = vkGetPhysicalDeviceSurfaceCapabilitiesKHR(gpu(), surface,
                                                    &surface_capabilities);
    pass = (err == VK_SUCCESS);
    ASSERT_TRUE(pass);

    // Get the surface formats:
    uint32_t surface_format_count;

    // First, try without a pointer to surface_format_count:
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "called with NULL pointer");
    vkGetPhysicalDeviceSurfaceFormatsKHR(gpu(), surface, NULL, NULL);
    pass = (err == VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Next, call with a non-NULL pSurfaceFormats, even though we haven't
    // correctly done a 1st try (to get the count):
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "but no prior positive value has been seen for");
    surface_format_count = 0;
    vkGetPhysicalDeviceSurfaceFormatsKHR(
        gpu(), surface, &surface_format_count,
        (VkSurfaceFormatKHR *)&surface_format_count);
    pass = (err == VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Next, correctly do a 1st try (with a NULL pointer to surface_formats):
    vkGetPhysicalDeviceSurfaceFormatsKHR(gpu(), surface, &surface_format_count,
                                         NULL);
    pass = (err == VK_SUCCESS);
    ASSERT_TRUE(pass);

    // Allocate memory for the correct number of VkSurfaceFormatKHR's:
    VkSurfaceFormatKHR *surface_formats = (VkSurfaceFormatKHR *)malloc(
        surface_format_count * sizeof(VkSurfaceFormatKHR));

    // Next, do a 2nd try with surface_format_count being set too high:
    surface_format_count += 5;
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "that is greater than the value");
    vkGetPhysicalDeviceSurfaceFormatsKHR(gpu(), surface, &surface_format_count,
                                         surface_formats);
    pass = (err == VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Finally, do a correct 1st and 2nd try:
    vkGetPhysicalDeviceSurfaceFormatsKHR(gpu(), surface, &surface_format_count,
                                         NULL);
    pass = (err == VK_SUCCESS);
    ASSERT_TRUE(pass);
    vkGetPhysicalDeviceSurfaceFormatsKHR(gpu(), surface, &surface_format_count,
                                         surface_formats);
    pass = (err == VK_SUCCESS);
    ASSERT_TRUE(pass);

    // Get the surface present modes:
    uint32_t surface_present_mode_count;

    // First, try without a pointer to surface_format_count:
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "called with NULL pointer");
    vkGetPhysicalDeviceSurfacePresentModesKHR(gpu(), surface, NULL, NULL);
    pass = (err == VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Next, call with a non-NULL VkPresentModeKHR, even though we haven't
    // correctly done a 1st try (to get the count):
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "but no prior positive value has been seen for");
    surface_present_mode_count = 0;
    vkGetPhysicalDeviceSurfacePresentModesKHR(
        gpu(), surface, &surface_present_mode_count,
        (VkPresentModeKHR *)&surface_present_mode_count);
    pass = (err == VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Next, correctly do a 1st try (with a NULL pointer to surface_formats):
    vkGetPhysicalDeviceSurfacePresentModesKHR(
        gpu(), surface, &surface_present_mode_count, NULL);
    pass = (err == VK_SUCCESS);
    ASSERT_TRUE(pass);

    // Allocate memory for the correct number of VkSurfaceFormatKHR's:
    VkPresentModeKHR *surface_present_modes = (VkPresentModeKHR *)malloc(
        surface_present_mode_count * sizeof(VkPresentModeKHR));

    // Next, do a 2nd try with surface_format_count being set too high:
    surface_present_mode_count += 5;
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "that is greater than the value");
    vkGetPhysicalDeviceSurfacePresentModesKHR(
        gpu(), surface, &surface_present_mode_count, surface_present_modes);
    pass = (err == VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Finally, do a correct 1st and 2nd try:
    vkGetPhysicalDeviceSurfacePresentModesKHR(
        gpu(), surface, &surface_present_mode_count, NULL);
    pass = (err == VK_SUCCESS);
    ASSERT_TRUE(pass);
    vkGetPhysicalDeviceSurfacePresentModesKHR(
        gpu(), surface, &surface_present_mode_count, surface_present_modes);
    pass = (err == VK_SUCCESS);
    ASSERT_TRUE(pass);

    // Create a swapchain:

    // First, try without a pointer to swapchain_create_info:
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "called with NULL pointer");
    err = vkCreateSwapchainKHR(m_device->device(), NULL, NULL, &swapchain);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Next, call with a non-NULL swapchain_create_info, that has the wrong
    // sType:
    swapchain_create_info.sType = VK_STRUCTURE_TYPE_APPLICATION_INFO;
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "called with the wrong value for");
    err = vkCreateSwapchainKHR(m_device->device(), &swapchain_create_info, NULL,
                               &swapchain);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Next, call with a NULL swapchain pointer:
    swapchain_create_info.sType = VK_STRUCTURE_TYPE_SWAPCHAIN_CREATE_INFO_KHR;
    swapchain_create_info.pNext = NULL;
    swapchain_create_info.flags = 0;
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "called with NULL pointer");
    err = vkCreateSwapchainKHR(m_device->device(), &swapchain_create_info, NULL,
                               NULL);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // TODO: Enhance swapchain layer so that
    // swapchain_create_info.queueFamilyIndexCount is checked against something?

    // Next, call with a queue family index that's too large:
    uint32_t queueFamilyIndex[2] = {100000, 0};
    swapchain_create_info.imageSharingMode = VK_SHARING_MODE_CONCURRENT;
    swapchain_create_info.queueFamilyIndexCount = 2;
    swapchain_create_info.pQueueFamilyIndices = queueFamilyIndex;
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "called with a queueFamilyIndex that is too large");
    err = vkCreateSwapchainKHR(m_device->device(), &swapchain_create_info, NULL,
                               &swapchain);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Next, call a queueFamilyIndexCount that's too small for CONCURRENT:
    swapchain_create_info.imageSharingMode = VK_SHARING_MODE_CONCURRENT;
    swapchain_create_info.queueFamilyIndexCount = 1;
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "but with a bad value(s) for pCreateInfo->queueFamilyIndexCount or "
        "pCreateInfo->pQueueFamilyIndices).");
    err = vkCreateSwapchainKHR(m_device->device(), &swapchain_create_info, NULL,
                               &swapchain);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();

    // Next, call with an invalid imageSharingMode:
    swapchain_create_info.imageSharingMode = VK_SHARING_MODE_MAX_ENUM;
    swapchain_create_info.queueFamilyIndexCount = 1;
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "called with a non-supported pCreateInfo->imageSharingMode (i.e.");
    err = vkCreateSwapchainKHR(m_device->device(), &swapchain_create_info, NULL,
                               &swapchain);
    pass = (err != VK_SUCCESS);
    ASSERT_TRUE(pass);
    m_errorMonitor->VerifyFound();
    // Fix for the future:
    // FIXME: THIS ISN'T CORRECT--MUST QUERY UNTIL WE FIND A QUEUE FAMILY THAT'S
    // SUPPORTED
    swapchain_create_info.queueFamilyIndexCount = 0;
    queueFamilyIndex[0] = 0;
    swapchain_create_info.imageSharingMode = VK_SHARING_MODE_EXCLUSIVE;

    // TODO: CONTINUE TESTING VALIDATION OF vkCreateSwapchainKHR() ...
    // Get the images from a swapchain:
    // Acquire an image from a swapchain:
    // Present an image to a swapchain:
    // Destroy the swapchain:

    // TODOs:
    //
    // - Try destroying the device without first destroying the swapchain
    //
    // - Try destroying the device without first destroying the surface
    //
    // - Try destroying the surface without first destroying the swapchain

    // Destroy the surface:
    vkDestroySurfaceKHR(instance(), surface, NULL);

    // Tear down the window:
    xcb_destroy_window(connection, xcb_window);
    xcb_disconnect(connection);

#else  // VK_USE_PLATFORM_XCB_KHR
    return;
#endif // VK_USE_PLATFORM_XCB_KHR
}

TEST_F(VkLayerTest, MapMemWithoutHostVisibleBit) {
    VkResult err;
    bool pass;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Mapping Memory without VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Create an image, allocate memory, free it, and then try to bind it
    VkImage image;
    VkDeviceMemory mem;
    VkMemoryRequirements mem_reqs;

    const VkFormat tex_format = VK_FORMAT_B8G8R8A8_UNORM;
    const int32_t tex_width = 32;
    const int32_t tex_height = 32;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = tex_format;
    image_create_info.extent.width = tex_width;
    image_create_info.extent.height = tex_height;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_LINEAR;
    image_create_info.usage = VK_IMAGE_USAGE_SAMPLED_BIT;
    image_create_info.flags = 0;

    VkMemoryAllocateInfo mem_alloc = {};
    mem_alloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    mem_alloc.pNext = NULL;
    mem_alloc.allocationSize = 0;
    // Introduce failure, do NOT set memProps to
    // VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT
    mem_alloc.memoryTypeIndex = 1;

    err = vkCreateImage(m_device->device(), &image_create_info, NULL, &image);
    ASSERT_VK_SUCCESS(err);

    vkGetImageMemoryRequirements(m_device->device(), image, &mem_reqs);

    mem_alloc.allocationSize = mem_reqs.size;

    pass =
        m_device->phy().set_memory_type(mem_reqs.memoryTypeBits, &mem_alloc, 0,
                                        VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT);
    if (!pass) { // If we can't find any unmappable memory this test doesn't
                 // make sense
        vkDestroyImage(m_device->device(), image, NULL);
        return;
    }

    // allocate memory
    err = vkAllocateMemory(m_device->device(), &mem_alloc, NULL, &mem);
    ASSERT_VK_SUCCESS(err);

    // Try to bind free memory that has been freed
    err = vkBindImageMemory(m_device->device(), image, mem, 0);
    ASSERT_VK_SUCCESS(err);

    // Map memory as if to initialize the image
    void *mappedAddress = NULL;
    err = vkMapMemory(m_device->device(), mem, 0, VK_WHOLE_SIZE, 0,
                      &mappedAddress);

    m_errorMonitor->VerifyFound();

    vkDestroyImage(m_device->device(), image, NULL);
    vkFreeMemory(m_device->device(), mem, NULL);
}

TEST_F(VkLayerTest, RebindMemory) {
    VkResult err;
    bool pass;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "which has already been bound to mem object");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Create an image, allocate memory, free it, and then try to bind it
    VkImage image;
    VkDeviceMemory mem1;
    VkDeviceMemory mem2;
    VkMemoryRequirements mem_reqs;

    const VkFormat tex_format = VK_FORMAT_B8G8R8A8_UNORM;
    const int32_t tex_width = 32;
    const int32_t tex_height = 32;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = tex_format;
    image_create_info.extent.width = tex_width;
    image_create_info.extent.height = tex_height;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_LINEAR;
    image_create_info.usage = VK_IMAGE_USAGE_SAMPLED_BIT;
    image_create_info.flags = 0;

    VkMemoryAllocateInfo mem_alloc = {};
    mem_alloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    mem_alloc.pNext = NULL;
    mem_alloc.allocationSize = 0;
    mem_alloc.memoryTypeIndex = 0;

    // Introduce failure, do NOT set memProps to
    // VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT
    mem_alloc.memoryTypeIndex = 1;
    err = vkCreateImage(m_device->device(), &image_create_info, NULL, &image);
    ASSERT_VK_SUCCESS(err);

    vkGetImageMemoryRequirements(m_device->device(), image, &mem_reqs);

    mem_alloc.allocationSize = mem_reqs.size;
    pass =
        m_device->phy().set_memory_type(mem_reqs.memoryTypeBits, &mem_alloc, 0);
    ASSERT_TRUE(pass);

    // allocate 2 memory objects
    err = vkAllocateMemory(m_device->device(), &mem_alloc, NULL, &mem1);
    ASSERT_VK_SUCCESS(err);
    err = vkAllocateMemory(m_device->device(), &mem_alloc, NULL, &mem2);
    ASSERT_VK_SUCCESS(err);

    // Bind first memory object to Image object
    err = vkBindImageMemory(m_device->device(), image, mem1, 0);
    ASSERT_VK_SUCCESS(err);

    // Introduce validation failure, try to bind a different memory object to
    // the same image object
    err = vkBindImageMemory(m_device->device(), image, mem2, 0);

    m_errorMonitor->VerifyFound();

    vkDestroyImage(m_device->device(), image, NULL);
    vkFreeMemory(m_device->device(), mem1, NULL);
    vkFreeMemory(m_device->device(), mem2, NULL);
}

TEST_F(VkLayerTest, SubmitSignaledFence) {
    vk_testing::Fence testFence;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT, "submitted in SIGNALED state.  Fences "
                                       "must be reset before being submitted");

    VkFenceCreateInfo fenceInfo = {};
    fenceInfo.sType = VK_STRUCTURE_TYPE_FENCE_CREATE_INFO;
    fenceInfo.pNext = NULL;
    fenceInfo.flags = VK_FENCE_CREATE_SIGNALED_BIT;

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitViewport());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    BeginCommandBuffer();
    m_commandBuffer->ClearAllBuffers(m_clear_color, m_depth_clear_color,
                                     m_stencil_clear_color, NULL);
    EndCommandBuffer();

    testFence.init(*m_device, fenceInfo);

    VkSubmitInfo submit_info;
    submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
    submit_info.pNext = NULL;
    submit_info.waitSemaphoreCount = 0;
    submit_info.pWaitSemaphores = NULL;
    submit_info.pWaitDstStageMask = NULL;
    submit_info.commandBufferCount = 1;
    submit_info.pCommandBuffers = &m_commandBuffer->handle();
    submit_info.signalSemaphoreCount = 0;
    submit_info.pSignalSemaphores = NULL;

    vkQueueSubmit(m_device->m_queue, 1, &submit_info, testFence.handle());
    vkQueueWaitIdle(m_device->m_queue);

    m_errorMonitor->VerifyFound();
}
// This is a positive test. We used to expect error in this case but spec now
// allows it
TEST_F(VkLayerTest, ResetUnsignaledFence) {
    m_errorMonitor->ExpectSuccess();
    vk_testing::Fence testFence;
    VkFenceCreateInfo fenceInfo = {};
    fenceInfo.sType = VK_STRUCTURE_TYPE_FENCE_CREATE_INFO;
    fenceInfo.pNext = NULL;

    ASSERT_NO_FATAL_FAILURE(InitState());
    testFence.init(*m_device, fenceInfo);
    VkFence fences[1] = {testFence.handle()};
    VkResult result = vkResetFences(m_device->device(), 1, fences);
    ASSERT_VK_SUCCESS(result);

    m_errorMonitor->VerifyNotFound();
}

TEST_F(VkLayerTest, CommandBufferSimultaneousUseSync)
{
    m_errorMonitor->ExpectSuccess();

    ASSERT_NO_FATAL_FAILURE(InitState());
    VkResult err;

    // Record (empty!) command buffer that can be submitted multiple times
    // simultaneously.
    VkCommandBufferBeginInfo cbbi = {
        VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO, nullptr,
        VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT, nullptr
    };
    m_commandBuffer->BeginCommandBuffer(&cbbi);
    m_commandBuffer->EndCommandBuffer();

    VkFenceCreateInfo fci = { VK_STRUCTURE_TYPE_FENCE_CREATE_INFO, nullptr, 0 };
    VkFence fence;
    err = vkCreateFence(m_device->device(), &fci, nullptr, &fence);
    ASSERT_VK_SUCCESS(err);

    VkSemaphoreCreateInfo sci = { VK_STRUCTURE_TYPE_SEMAPHORE_CREATE_INFO, nullptr, 0 };
    VkSemaphore s1, s2;
    err = vkCreateSemaphore(m_device->device(), &sci, nullptr, &s1);
    ASSERT_VK_SUCCESS(err);
    err = vkCreateSemaphore(m_device->device(), &sci, nullptr, &s2);
    ASSERT_VK_SUCCESS(err);

    // Submit CB once signaling s1, with fence so we can roll forward to its retirement.
    VkSubmitInfo si = { VK_STRUCTURE_TYPE_SUBMIT_INFO, nullptr, 0, nullptr, nullptr,
        1, &m_commandBuffer->handle(), 1, &s1 };
    err = vkQueueSubmit(m_device->m_queue, 1, &si, fence);
    ASSERT_VK_SUCCESS(err);

    // Submit CB again, signaling s2.
    si.pSignalSemaphores = &s2;
    err = vkQueueSubmit(m_device->m_queue, 1, &si, VK_NULL_HANDLE);
    ASSERT_VK_SUCCESS(err);

    // Wait for fence.
    err = vkWaitForFences(m_device->device(), 1, &fence, VK_TRUE, UINT64_MAX);
    ASSERT_VK_SUCCESS(err);

    // CB is still in flight from second submission, but semaphore s1 is no
    // longer in flight. delete it.
    vkDestroySemaphore(m_device->device(), s1, nullptr);

    m_errorMonitor->VerifyNotFound();

    // Force device idle and clean up remaining objects
    vkDeviceWaitIdle(m_device->device());
    vkDestroySemaphore(m_device->device(), s2, nullptr);
    vkDestroyFence(m_device->device(), fence, nullptr);
}

TEST_F(VkLayerTest, InvalidUsageBits)
{
    TEST_DESCRIPTION(
        "Specify wrong usage for image then create conflicting view of image "
        "Initialize buffer with wrong usage then perform copy expecting errors "
        "from both the image and the buffer (2 calls)");
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Invalid usage flag for image ");

    ASSERT_NO_FATAL_FAILURE(InitState());
    VkImageObj image(m_device);
    // Initialize image with USAGE_INPUT_ATTACHMENT
    image.init(128, 128, VK_FORMAT_D24_UNORM_S8_UINT,
               VK_IMAGE_USAGE_INPUT_ATTACHMENT_BIT, VK_IMAGE_TILING_OPTIMAL, 0);
    ASSERT_TRUE(image.initialized());

    VkImageView dsv;
    VkImageViewCreateInfo dsvci = {};
    dsvci.sType = VK_STRUCTURE_TYPE_IMAGE_VIEW_CREATE_INFO;
    dsvci.image = image.handle();
    dsvci.viewType = VK_IMAGE_VIEW_TYPE_2D;
    dsvci.format = VK_FORMAT_D32_SFLOAT_S8_UINT;
    dsvci.subresourceRange.layerCount = 1;
    dsvci.subresourceRange.baseMipLevel = 0;
    dsvci.subresourceRange.levelCount = 1;
    dsvci.subresourceRange.aspectMask =
        VK_IMAGE_ASPECT_DEPTH_BIT | VK_IMAGE_ASPECT_STENCIL_BIT;

    // Create a view with depth / stencil aspect for image with different usage
    vkCreateImageView(m_device->device(), &dsvci, NULL, &dsv);

    m_errorMonitor->VerifyFound();

    // Initialize buffer with TRANSFER_DST usage
    vk_testing::Buffer buffer;
    VkMemoryPropertyFlags reqs = 0;
    buffer.init_as_dst(*m_device, 128 * 128, reqs);
    VkBufferImageCopy region = {};
    region.bufferRowLength = 128;
    region.bufferImageHeight = 128;
    region.imageSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    region.imageSubresource.layerCount = 1;
    region.imageExtent.height = 16;
    region.imageExtent.width = 16;
    region.imageExtent.depth = 1;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Invalid usage flag for buffer ");
    // Buffer usage not set to TRANSFER_SRC and image usage not set to
    // TRANSFER_DST
    BeginCommandBuffer();
    vkCmdCopyBufferToImage(m_commandBuffer->GetBufferHandle(), buffer.handle(),
                           image.handle(), VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL,
                           1, &region);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Invalid usage flag for image ");
    vkCmdCopyBufferToImage(m_commandBuffer->GetBufferHandle(), buffer.handle(),
                           image.handle(), VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL,
                           1, &region);
    m_errorMonitor->VerifyFound();
}
#endif // MEM_TRACKER_TESTS

#if OBJ_TRACKER_TESTS

TEST_F(VkLayerTest, LeakAnObject) {
    VkResult err;

    TEST_DESCRIPTION(
        "Create a fence and destroy its device without first destroying the fence.");

    // Note that we have to create a new device since destroying the
    // framework's device causes Teardown() to fail and just calling Teardown
    // will destroy the errorMonitor.

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "OBJ ERROR : VK_DEBUG_REPORT_OBJECT_TYPE_FENCE_EXT object");

    ASSERT_NO_FATAL_FAILURE(InitState());

    const std::vector<VkQueueFamilyProperties> queue_props =
        m_device->queue_props;
    std::vector<VkDeviceQueueCreateInfo> queue_info;
    queue_info.reserve(queue_props.size());
    std::vector<std::vector<float>> queue_priorities;
    for (uint32_t i = 0; i < (uint32_t)queue_props.size(); i++) {
        VkDeviceQueueCreateInfo qi = {};
        qi.sType = VK_STRUCTURE_TYPE_DEVICE_QUEUE_CREATE_INFO;
        qi.pNext = NULL;
        qi.queueFamilyIndex = i;
        qi.queueCount = queue_props[i].queueCount;
        queue_priorities.emplace_back(qi.queueCount, 0.0f);
        qi.pQueuePriorities = queue_priorities[i].data();
        queue_info.push_back(qi);
    }

    std::vector<const char *> device_layer_names;
    std::vector<const char *> device_extension_names;
    device_layer_names.push_back("VK_LAYER_GOOGLE_threading");
    device_layer_names.push_back("VK_LAYER_LUNARG_parameter_validation");
    device_layer_names.push_back("VK_LAYER_LUNARG_object_tracker");
    device_layer_names.push_back("VK_LAYER_LUNARG_core_validation");
    device_layer_names.push_back("VK_LAYER_LUNARG_device_limits");
    device_layer_names.push_back("VK_LAYER_LUNARG_image");
    device_layer_names.push_back("VK_LAYER_GOOGLE_unique_objects");

    // The sacrificial device object
    VkDevice testDevice;
    VkDeviceCreateInfo device_create_info = {};
    auto features = m_device->phy().features();
    device_create_info.sType = VK_STRUCTURE_TYPE_DEVICE_CREATE_INFO;
    device_create_info.pNext = NULL;
    device_create_info.queueCreateInfoCount = queue_info.size();
    device_create_info.pQueueCreateInfos = queue_info.data();
    device_create_info.enabledLayerCount = device_layer_names.size();
    device_create_info.ppEnabledLayerNames = device_layer_names.data();
    device_create_info.pEnabledFeatures = &features;
    err = vkCreateDevice(gpu(), &device_create_info, NULL, &testDevice);
    ASSERT_VK_SUCCESS(err);

    VkFence fence;
    VkFenceCreateInfo fence_create_info = {};
    fence_create_info.sType = VK_STRUCTURE_TYPE_FENCE_CREATE_INFO;
    fence_create_info.pNext = NULL;
    fence_create_info.flags = 0;
    err = vkCreateFence(testDevice, &fence_create_info, NULL, &fence);
    ASSERT_VK_SUCCESS(err);

    // Induce failure by not calling vkDestroyFence
    vkDestroyDevice(testDevice, NULL);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, InvalidCommandPoolConsistency) {

    TEST_DESCRIPTION("Allocate command buffers from one command pool and "
                     "attempt to delete them from another.");

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "FreeCommandBuffers is attempting to free Command Buffer");

    VkCommandPool command_pool_one;
    VkCommandPool command_pool_two;

    VkCommandPoolCreateInfo pool_create_info{};
    pool_create_info.sType = VK_STRUCTURE_TYPE_COMMAND_POOL_CREATE_INFO;
    pool_create_info.queueFamilyIndex = m_device->graphics_queue_node_index_;
    pool_create_info.flags = VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT;

    vkCreateCommandPool(m_device->device(), &pool_create_info, nullptr,
        &command_pool_one);

    vkCreateCommandPool(m_device->device(), &pool_create_info, nullptr,
        &command_pool_two);

    VkCommandBuffer command_buffer[9];
    VkCommandBufferAllocateInfo command_buffer_allocate_info{};
    command_buffer_allocate_info.sType =
        VK_STRUCTURE_TYPE_COMMAND_BUFFER_ALLOCATE_INFO;
    command_buffer_allocate_info.commandPool = command_pool_one;
    command_buffer_allocate_info.commandBufferCount = 9;
    command_buffer_allocate_info.level = VK_COMMAND_BUFFER_LEVEL_PRIMARY;
    vkAllocateCommandBuffers(m_device->device(), &command_buffer_allocate_info,
        command_buffer);

    vkFreeCommandBuffers(m_device->device(), command_pool_two, 4,
        &command_buffer[3]);

    m_errorMonitor->VerifyFound();

    vkDestroyCommandPool(m_device->device(), command_pool_one, NULL);
    vkDestroyCommandPool(m_device->device(), command_pool_two, NULL);
}

TEST_F(VkLayerTest, InvalidDescriptorPoolConsistency) {
    VkResult err;

    TEST_DESCRIPTION("Allocate descriptor sets from one DS pool and "
        "attempt to delete them from another.");

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "FreeDescriptorSets is attempting to free descriptorSet");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_SAMPLER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.flags = 0;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool_one;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool_one);
    ASSERT_VK_SUCCESS(err);

    // Create a second descriptor pool
    VkDescriptorPool ds_pool_two;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool_two);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_SAMPLER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
        &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool_one;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
        &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    err = vkFreeDescriptorSets(m_device->device(), ds_pool_two, 1, &descriptorSet);

    m_errorMonitor->VerifyFound();

    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool_one, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool_two, NULL);
}

TEST_F(VkLayerTest, CreateUnknownObject) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Invalid VkImage Object ");

    TEST_DESCRIPTION(
        "Pass an invalid image object handle into a Vulkan API call.");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Pass bogus handle into GetImageMemoryRequirements
    VkMemoryRequirements mem_reqs;
    uint64_t fakeImageHandle = 0xCADECADE;
    VkImage fauxImage = reinterpret_cast<VkImage &>(fakeImageHandle);

    vkGetImageMemoryRequirements(m_device->device(), fauxImage, &mem_reqs);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, PipelineNotBound) {
    VkResult err;

    TEST_DESCRIPTION(
        "Pass in an invalid pipeline object handle into a Vulkan API call.");

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Invalid VkPipeline Object ");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.pNext = NULL;
    pipeline_layout_ci.setLayoutCount = 1;
    pipeline_layout_ci.pSetLayouts = &ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    VkPipeline badPipeline = (VkPipeline)((size_t)0xbaadb1be);

    BeginCommandBuffer();
    vkCmdBindPipeline(m_commandBuffer->GetBufferHandle(),
                      VK_PIPELINE_BIND_POINT_GRAPHICS, badPipeline);

    m_errorMonitor->VerifyFound();

    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, BindImageInvalidMemoryType) {
    VkResult err;

    TEST_DESCRIPTION("Test validation check for an invalid memory type index "
                     "during bind[Buffer|Image]Memory time");

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "for this object type are not compatible with the memory");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Create an image, allocate memory, set a bad typeIndex and then try to
    // bind it
    VkImage image;
    VkDeviceMemory mem;
    VkMemoryRequirements mem_reqs;
    const VkFormat tex_format = VK_FORMAT_B8G8R8A8_UNORM;
    const int32_t tex_width = 32;
    const int32_t tex_height = 32;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = tex_format;
    image_create_info.extent.width = tex_width;
    image_create_info.extent.height = tex_height;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_OPTIMAL;
    image_create_info.usage = VK_IMAGE_USAGE_SAMPLED_BIT;
    image_create_info.flags = 0;

    VkMemoryAllocateInfo mem_alloc = {};
    mem_alloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    mem_alloc.pNext = NULL;
    mem_alloc.allocationSize = 0;
    mem_alloc.memoryTypeIndex = 0;

    err = vkCreateImage(m_device->device(), &image_create_info, NULL, &image);
    ASSERT_VK_SUCCESS(err);

    vkGetImageMemoryRequirements(m_device->device(), image, &mem_reqs);
    mem_alloc.allocationSize = mem_reqs.size;
    // Introduce Failure, select likely invalid TypeIndex
    mem_alloc.memoryTypeIndex = 31;

    err = vkAllocateMemory(m_device->device(), &mem_alloc, NULL, &mem);
    ASSERT_VK_SUCCESS(err);

    err = vkBindImageMemory(m_device->device(), image, mem, 0);
    (void)err;

    m_errorMonitor->VerifyFound();

    vkDestroyImage(m_device->device(), image, NULL);
    vkFreeMemory(m_device->device(), mem, NULL);
}

TEST_F(VkLayerTest, BindInvalidMemory) {
    VkResult err;
    bool pass;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Invalid VkDeviceMemory Object ");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Create an image, allocate memory, free it, and then try to bind it
    VkImage image;
    VkDeviceMemory mem;
    VkMemoryRequirements mem_reqs;

    const VkFormat tex_format = VK_FORMAT_B8G8R8A8_UNORM;
    const int32_t tex_width = 32;
    const int32_t tex_height = 32;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = tex_format;
    image_create_info.extent.width = tex_width;
    image_create_info.extent.height = tex_height;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_LINEAR;
    image_create_info.usage = VK_IMAGE_USAGE_SAMPLED_BIT;
    image_create_info.flags = 0;

    VkMemoryAllocateInfo mem_alloc = {};
    mem_alloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    mem_alloc.pNext = NULL;
    mem_alloc.allocationSize = 0;
    mem_alloc.memoryTypeIndex = 0;

    err = vkCreateImage(m_device->device(), &image_create_info, NULL, &image);
    ASSERT_VK_SUCCESS(err);

    vkGetImageMemoryRequirements(m_device->device(), image, &mem_reqs);

    mem_alloc.allocationSize = mem_reqs.size;

    pass =
        m_device->phy().set_memory_type(mem_reqs.memoryTypeBits, &mem_alloc, 0);
    ASSERT_TRUE(pass);

    // allocate memory
    err = vkAllocateMemory(m_device->device(), &mem_alloc, NULL, &mem);
    ASSERT_VK_SUCCESS(err);

    // Introduce validation failure, free memory before binding
    vkFreeMemory(m_device->device(), mem, NULL);

    // Try to bind free memory that has been freed
    err = vkBindImageMemory(m_device->device(), image, mem, 0);
    // This may very well return an error.
    (void)err;

    m_errorMonitor->VerifyFound();

    vkDestroyImage(m_device->device(), image, NULL);
}

TEST_F(VkLayerTest, BindMemoryToDestroyedObject) {
    VkResult err;
    bool pass;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Invalid VkImage Object ");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Create an image object, allocate memory, destroy the object and then try
    // to bind it
    VkImage image;
    VkDeviceMemory mem;
    VkMemoryRequirements mem_reqs;

    const VkFormat tex_format = VK_FORMAT_B8G8R8A8_UNORM;
    const int32_t tex_width = 32;
    const int32_t tex_height = 32;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = tex_format;
    image_create_info.extent.width = tex_width;
    image_create_info.extent.height = tex_height;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_LINEAR;
    image_create_info.usage = VK_IMAGE_USAGE_SAMPLED_BIT;
    image_create_info.flags = 0;

    VkMemoryAllocateInfo mem_alloc = {};
    mem_alloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    mem_alloc.pNext = NULL;
    mem_alloc.allocationSize = 0;
    mem_alloc.memoryTypeIndex = 0;

    err = vkCreateImage(m_device->device(), &image_create_info, NULL, &image);
    ASSERT_VK_SUCCESS(err);

    vkGetImageMemoryRequirements(m_device->device(), image, &mem_reqs);

    mem_alloc.allocationSize = mem_reqs.size;
    pass =
        m_device->phy().set_memory_type(mem_reqs.memoryTypeBits, &mem_alloc, 0);
    ASSERT_TRUE(pass);

    // Allocate memory
    err = vkAllocateMemory(m_device->device(), &mem_alloc, NULL, &mem);
    ASSERT_VK_SUCCESS(err);

    // Introduce validation failure, destroy Image object before binding
    vkDestroyImage(m_device->device(), image, NULL);
    ASSERT_VK_SUCCESS(err);

    // Now Try to bind memory to this destroyed object
    err = vkBindImageMemory(m_device->device(), image, mem, 0);
    // This may very well return an error.
    (void)err;

    m_errorMonitor->VerifyFound();

    vkFreeMemory(m_device->device(), mem, NULL);
}

#endif // OBJ_TRACKER_TESTS

#if DRAW_STATE_TESTS

// This is a positive test.  No errors should be generated.
TEST_F(VkLayerTest, WaitEventThenSet) {
    TEST_DESCRIPTION(
        "Wait on a event then set it after the wait has been submitted.");

    m_errorMonitor->ExpectSuccess();

    VkEvent event;
    VkEventCreateInfo event_create_info{};
    event_create_info.sType = VK_STRUCTURE_TYPE_EVENT_CREATE_INFO;
    vkCreateEvent(m_device->device(), &event_create_info, nullptr, &event);

    VkCommandPool command_pool;
    VkCommandPoolCreateInfo pool_create_info{};
    pool_create_info.sType = VK_STRUCTURE_TYPE_COMMAND_POOL_CREATE_INFO;
    pool_create_info.queueFamilyIndex = m_device->graphics_queue_node_index_;
    pool_create_info.flags = VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT;
    vkCreateCommandPool(m_device->device(), &pool_create_info, nullptr,
                        &command_pool);

    VkCommandBuffer command_buffer;
    VkCommandBufferAllocateInfo command_buffer_allocate_info{};
    command_buffer_allocate_info.sType =
        VK_STRUCTURE_TYPE_COMMAND_BUFFER_ALLOCATE_INFO;
    command_buffer_allocate_info.commandPool = command_pool;
    command_buffer_allocate_info.commandBufferCount = 1;
    command_buffer_allocate_info.level = VK_COMMAND_BUFFER_LEVEL_PRIMARY;
    vkAllocateCommandBuffers(m_device->device(), &command_buffer_allocate_info,
                             &command_buffer);

    VkQueue queue = VK_NULL_HANDLE;
    vkGetDeviceQueue(m_device->device(), m_device->graphics_queue_node_index_,
                     0, &queue);

    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer, &begin_info);

        vkCmdWaitEvents(command_buffer, 1, &event, VK_PIPELINE_STAGE_HOST_BIT,
                        VK_PIPELINE_STAGE_ALL_COMMANDS_BIT, 0, nullptr, 0,
                        nullptr, 0, nullptr);
        vkCmdResetEvent(command_buffer, event,
                        VK_PIPELINE_STAGE_ALL_COMMANDS_BIT);
        vkEndCommandBuffer(command_buffer);
    }
    {
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer;
        submit_info.signalSemaphoreCount = 0;
        submit_info.pSignalSemaphores = nullptr;
        vkQueueSubmit(queue, 1, &submit_info, VK_NULL_HANDLE);
    }
    { vkSetEvent(m_device->device(), event); }

    vkQueueWaitIdle(queue);

    vkDestroyEvent(m_device->device(), event, nullptr);
    vkFreeCommandBuffers(m_device->device(), command_pool, 1, &command_buffer);
    vkDestroyCommandPool(m_device->device(), command_pool, NULL);

    m_errorMonitor->VerifyNotFound();
}
// This is a positive test.  No errors should be generated.
TEST_F(VkLayerTest, QueryAndCopyMultipleCommandBuffers) {
    TEST_DESCRIPTION(
        "Issue a query and copy from it on a second command buffer.");

    if ((m_device->queue_props.empty()) ||
        (m_device->queue_props[0].queueCount < 2))
        return;

    m_errorMonitor->ExpectSuccess();

    VkQueryPool query_pool;
    VkQueryPoolCreateInfo query_pool_create_info{};
    query_pool_create_info.sType = VK_STRUCTURE_TYPE_QUERY_POOL_CREATE_INFO;
    query_pool_create_info.queryType = VK_QUERY_TYPE_TIMESTAMP;
    query_pool_create_info.queryCount = 1;
    vkCreateQueryPool(m_device->device(), &query_pool_create_info, nullptr,
                      &query_pool);

    VkCommandPool command_pool;
    VkCommandPoolCreateInfo pool_create_info{};
    pool_create_info.sType = VK_STRUCTURE_TYPE_COMMAND_POOL_CREATE_INFO;
    pool_create_info.queueFamilyIndex = m_device->graphics_queue_node_index_;
    pool_create_info.flags = VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT;
    vkCreateCommandPool(m_device->device(), &pool_create_info, nullptr,
                        &command_pool);

    VkCommandBuffer command_buffer[2];
    VkCommandBufferAllocateInfo command_buffer_allocate_info{};
    command_buffer_allocate_info.sType =
        VK_STRUCTURE_TYPE_COMMAND_BUFFER_ALLOCATE_INFO;
    command_buffer_allocate_info.commandPool = command_pool;
    command_buffer_allocate_info.commandBufferCount = 2;
    command_buffer_allocate_info.level = VK_COMMAND_BUFFER_LEVEL_PRIMARY;
    vkAllocateCommandBuffers(m_device->device(), &command_buffer_allocate_info,
                             command_buffer);

    VkQueue queue = VK_NULL_HANDLE;
    vkGetDeviceQueue(m_device->device(), m_device->graphics_queue_node_index_,
                     1, &queue);

    uint32_t qfi = 0;
    VkBufferCreateInfo buff_create_info = {};
    buff_create_info.sType = VK_STRUCTURE_TYPE_BUFFER_CREATE_INFO;
    buff_create_info.size = 1024;
    buff_create_info.usage = VK_BUFFER_USAGE_TRANSFER_DST_BIT;
    buff_create_info.queueFamilyIndexCount = 1;
    buff_create_info.pQueueFamilyIndices = &qfi;

    VkResult err;
    VkBuffer buffer;
    err = vkCreateBuffer(m_device->device(), &buff_create_info, NULL, &buffer);
    ASSERT_VK_SUCCESS(err);
    VkMemoryAllocateInfo mem_alloc = {};
    mem_alloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    mem_alloc.pNext = NULL;
    mem_alloc.allocationSize = 1024;
    mem_alloc.memoryTypeIndex = 0;

    VkMemoryRequirements memReqs;
    vkGetBufferMemoryRequirements(m_device->device(), buffer, &memReqs);
    bool pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &mem_alloc, 0);
    if (!pass) {
        vkDestroyBuffer(m_device->device(), buffer, NULL);
        return;
    }

    VkDeviceMemory mem;
    err = vkAllocateMemory(m_device->device(), &mem_alloc, NULL, &mem);
    ASSERT_VK_SUCCESS(err);
    err = vkBindBufferMemory(m_device->device(), buffer, mem, 0);
    ASSERT_VK_SUCCESS(err);

    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[0], &begin_info);

        vkCmdResetQueryPool(command_buffer[0], query_pool, 0, 1);
        vkCmdWriteTimestamp(command_buffer[0],
                            VK_PIPELINE_STAGE_ALL_GRAPHICS_BIT, query_pool, 0);

        vkEndCommandBuffer(command_buffer[0]);

        vkBeginCommandBuffer(command_buffer[1], &begin_info);

        vkCmdCopyQueryPoolResults(command_buffer[1], query_pool, 0, 1, buffer,
                                  0, 0, 0);

        vkEndCommandBuffer(command_buffer[1]);
    }
    {
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 2;
        submit_info.pCommandBuffers = command_buffer;
        submit_info.signalSemaphoreCount = 0;
        submit_info.pSignalSemaphores = nullptr;
        vkQueueSubmit(queue, 1, &submit_info, VK_NULL_HANDLE);
    }

    vkQueueWaitIdle(queue);

    vkDestroyQueryPool(m_device->device(), query_pool, nullptr);
    vkFreeCommandBuffers(m_device->device(), command_pool, 2, command_buffer);
    vkDestroyCommandPool(m_device->device(), command_pool, NULL);
    vkDestroyBuffer(m_device->device(), buffer, NULL);
    vkFreeMemory(m_device->device(), mem, NULL);

    m_errorMonitor->VerifyNotFound();
}

TEST_F(VkLayerTest, ResetEventThenSet) {
    TEST_DESCRIPTION(
        "Reset an event then set it after the reset has been submitted.");

    m_errorMonitor->ExpectSuccess();

    VkEvent event;
    VkEventCreateInfo event_create_info{};
    event_create_info.sType = VK_STRUCTURE_TYPE_EVENT_CREATE_INFO;
    vkCreateEvent(m_device->device(), &event_create_info, nullptr, &event);

    VkCommandPool command_pool;
    VkCommandPoolCreateInfo pool_create_info{};
    pool_create_info.sType = VK_STRUCTURE_TYPE_COMMAND_POOL_CREATE_INFO;
    pool_create_info.queueFamilyIndex = m_device->graphics_queue_node_index_;
    pool_create_info.flags = VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT;
    vkCreateCommandPool(m_device->device(), &pool_create_info, nullptr,
                        &command_pool);

    VkCommandBuffer command_buffer;
    VkCommandBufferAllocateInfo command_buffer_allocate_info{};
    command_buffer_allocate_info.sType =
        VK_STRUCTURE_TYPE_COMMAND_BUFFER_ALLOCATE_INFO;
    command_buffer_allocate_info.commandPool = command_pool;
    command_buffer_allocate_info.commandBufferCount = 1;
    command_buffer_allocate_info.level = VK_COMMAND_BUFFER_LEVEL_PRIMARY;
    vkAllocateCommandBuffers(m_device->device(), &command_buffer_allocate_info,
                             &command_buffer);

    VkQueue queue = VK_NULL_HANDLE;
    vkGetDeviceQueue(m_device->device(), m_device->graphics_queue_node_index_,
                     0, &queue);

    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer, &begin_info);

        vkCmdResetEvent(command_buffer, event,
                        VK_PIPELINE_STAGE_ALL_COMMANDS_BIT);
        vkCmdWaitEvents(command_buffer, 1, &event,
                        VK_PIPELINE_STAGE_ALL_COMMANDS_BIT,
                        VK_PIPELINE_STAGE_ALL_COMMANDS_BIT, 0, nullptr, 0,
                        nullptr, 0, nullptr);
        vkEndCommandBuffer(command_buffer);
    }
    {
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer;
        submit_info.signalSemaphoreCount = 0;
        submit_info.pSignalSemaphores = nullptr;
        vkQueueSubmit(queue, 1, &submit_info, VK_NULL_HANDLE);
    }
    {
        m_errorMonitor->SetDesiredFailureMsg(
            VK_DEBUG_REPORT_ERROR_BIT_EXT, "Cannot call vkSetEvent() on event "
                                           "0x1 that is already in use by a "
                                           "command buffer.");
        vkSetEvent(m_device->device(), event);
        m_errorMonitor->VerifyFound();
    }

    vkQueueWaitIdle(queue);

    vkDestroyEvent(m_device->device(), event, nullptr);
    vkFreeCommandBuffers(m_device->device(), command_pool, 1, &command_buffer);
    vkDestroyCommandPool(m_device->device(), command_pool, NULL);
}

// This is a positive test.  No errors should be generated.
TEST_F(VkLayerTest, TwoFencesThreeFrames) {
    TEST_DESCRIPTION("Two command buffers with two separate fences are each "
                     "run through a Submit & WaitForFences cycle 3 times. This "
                     "previously revealed a bug so running this positive test "
                     "to prevent a regression.");
    m_errorMonitor->ExpectSuccess();

    ASSERT_NO_FATAL_FAILURE(InitState());
    VkQueue queue = VK_NULL_HANDLE;
    vkGetDeviceQueue(m_device->device(), m_device->graphics_queue_node_index_,
                     0, &queue);

    static const uint32_t NUM_OBJECTS = 2;
    static const uint32_t NUM_FRAMES = 3;
    VkCommandBuffer cmd_buffers[NUM_OBJECTS] = {};
    VkFence fences[NUM_OBJECTS] = {};

    VkCommandPool cmd_pool;
    VkCommandPoolCreateInfo cmd_pool_ci = {};
    cmd_pool_ci.sType = VK_STRUCTURE_TYPE_COMMAND_POOL_CREATE_INFO;
    cmd_pool_ci.queueFamilyIndex = m_device->graphics_queue_node_index_;
    cmd_pool_ci.flags = VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT;
    VkResult err = vkCreateCommandPool(m_device->device(), &cmd_pool_ci,
                                       nullptr, &cmd_pool);
    ASSERT_VK_SUCCESS(err);

    VkCommandBufferAllocateInfo cmd_buf_info = {};
    cmd_buf_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_ALLOCATE_INFO;
    cmd_buf_info.commandPool = cmd_pool;
    cmd_buf_info.level = VK_COMMAND_BUFFER_LEVEL_PRIMARY;
    cmd_buf_info.commandBufferCount = 1;

    VkFenceCreateInfo fence_ci = {};
    fence_ci.sType = VK_STRUCTURE_TYPE_FENCE_CREATE_INFO;
    fence_ci.pNext = nullptr;
    fence_ci.flags = 0;

    for (uint32_t i = 0; i < NUM_OBJECTS; ++i) {
        err = vkAllocateCommandBuffers(m_device->device(), &cmd_buf_info,
                                       &cmd_buffers[i]);
        ASSERT_VK_SUCCESS(err);
        err = vkCreateFence(m_device->device(), &fence_ci, nullptr, &fences[i]);
        ASSERT_VK_SUCCESS(err);
    }

    for (uint32_t frame = 0; frame < NUM_FRAMES; ++frame) {
        for (uint32_t obj = 0; obj < NUM_OBJECTS; ++obj) {
            // Create empty cmd buffer
            VkCommandBufferBeginInfo cmdBufBeginDesc = {};
            cmdBufBeginDesc.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;

            err = vkBeginCommandBuffer(cmd_buffers[obj], &cmdBufBeginDesc);
            ASSERT_VK_SUCCESS(err);
            err = vkEndCommandBuffer(cmd_buffers[obj]);
            ASSERT_VK_SUCCESS(err);

            VkSubmitInfo submit_info = {};
            submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
            submit_info.commandBufferCount = 1;
            submit_info.pCommandBuffers = &cmd_buffers[obj];
            // Submit cmd buffer and wait for fence
            err = vkQueueSubmit(queue, 1, &submit_info, fences[obj]);
            ASSERT_VK_SUCCESS(err);
            err = vkWaitForFences(m_device->device(), 1, &fences[obj], VK_TRUE,
                                  UINT64_MAX);
            ASSERT_VK_SUCCESS(err);
            err = vkResetFences(m_device->device(), 1, &fences[obj]);
            ASSERT_VK_SUCCESS(err);
        }
    }
    m_errorMonitor->VerifyNotFound();
    vkDestroyCommandPool(m_device->device(), cmd_pool, NULL);
    for (uint32_t i = 0; i < NUM_OBJECTS; ++i) {
        vkDestroyFence(m_device->device(), fences[i], nullptr);
    }
}
// This is a positive test.  No errors should be generated.
TEST_F(VkLayerTest, TwoQueueSubmitsSeparateQueuesWithSemaphoreAndOneFenceQWI) {

    TEST_DESCRIPTION("Two command buffers, each in a separate QueueSubmit call "
        "submitted on separate queues followed by a QueueWaitIdle.");

    if ((m_device->queue_props.empty()) ||
        (m_device->queue_props[0].queueCount < 2))
        return;

    m_errorMonitor->ExpectSuccess();

    VkSemaphore semaphore;
    VkSemaphoreCreateInfo semaphore_create_info{};
    semaphore_create_info.sType = VK_STRUCTURE_TYPE_SEMAPHORE_CREATE_INFO;
    vkCreateSemaphore(m_device->device(), &semaphore_create_info, nullptr,
        &semaphore);

    VkCommandPool command_pool;
    VkCommandPoolCreateInfo pool_create_info{};
    pool_create_info.sType = VK_STRUCTURE_TYPE_COMMAND_POOL_CREATE_INFO;
    pool_create_info.queueFamilyIndex = m_device->graphics_queue_node_index_;
    pool_create_info.flags = VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT;
    vkCreateCommandPool(m_device->device(), &pool_create_info, nullptr,
        &command_pool);

    VkCommandBuffer command_buffer[2];
    VkCommandBufferAllocateInfo command_buffer_allocate_info{};
    command_buffer_allocate_info.sType =
        VK_STRUCTURE_TYPE_COMMAND_BUFFER_ALLOCATE_INFO;
    command_buffer_allocate_info.commandPool = command_pool;
    command_buffer_allocate_info.commandBufferCount = 2;
    command_buffer_allocate_info.level = VK_COMMAND_BUFFER_LEVEL_PRIMARY;
    vkAllocateCommandBuffers(m_device->device(), &command_buffer_allocate_info,
        command_buffer);

    VkQueue queue = VK_NULL_HANDLE;
    vkGetDeviceQueue(m_device->device(), m_device->graphics_queue_node_index_,
        1, &queue);

    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[0], &begin_info);

        vkCmdPipelineBarrier(command_buffer[0],
            VK_PIPELINE_STAGE_ALL_COMMANDS_BIT,
            VK_PIPELINE_STAGE_ALL_COMMANDS_BIT, 0, 0, nullptr,
            0, nullptr, 0, nullptr);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[0], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[0]);
    }
    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[1], &begin_info);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[1], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[1]);
    }
    {
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer[0];
        submit_info.signalSemaphoreCount = 1;
        submit_info.pSignalSemaphores = &semaphore;
        vkQueueSubmit(queue, 1, &submit_info, VK_NULL_HANDLE);
    }
    {
        VkPipelineStageFlags flags[]{VK_PIPELINE_STAGE_ALL_COMMANDS_BIT};
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer[1];
        submit_info.waitSemaphoreCount = 1;
        submit_info.pWaitSemaphores = &semaphore;
        submit_info.pWaitDstStageMask = flags;
        vkQueueSubmit(m_device->m_queue, 1, &submit_info, VK_NULL_HANDLE);
    }

    vkQueueWaitIdle(m_device->m_queue);

    vkDestroySemaphore(m_device->device(), semaphore, nullptr);
    vkFreeCommandBuffers(m_device->device(), command_pool, 2,
        &command_buffer[0]);
    vkDestroyCommandPool(m_device->device(), command_pool, NULL);

    m_errorMonitor->VerifyNotFound();
}

// This is a positive test.  No errors should be generated.
TEST_F(VkLayerTest, TwoQueueSubmitsSeparateQueuesWithSemaphoreAndOneFenceQWIFence) {

    TEST_DESCRIPTION("Two command buffers, each in a separate QueueSubmit call "
                     "submitted on separate queues, the second having a fence"
                     "followed by a QueueWaitIdle.");

    if ((m_device->queue_props.empty()) ||
        (m_device->queue_props[0].queueCount < 2))
        return;

    m_errorMonitor->ExpectSuccess();

    VkFence fence;
    VkFenceCreateInfo fence_create_info{};
    fence_create_info.sType = VK_STRUCTURE_TYPE_FENCE_CREATE_INFO;
    vkCreateFence(m_device->device(), &fence_create_info, nullptr, &fence);

    VkSemaphore semaphore;
    VkSemaphoreCreateInfo semaphore_create_info{};
    semaphore_create_info.sType = VK_STRUCTURE_TYPE_SEMAPHORE_CREATE_INFO;
    vkCreateSemaphore(m_device->device(), &semaphore_create_info, nullptr,
                      &semaphore);

    VkCommandPool command_pool;
    VkCommandPoolCreateInfo pool_create_info{};
    pool_create_info.sType = VK_STRUCTURE_TYPE_COMMAND_POOL_CREATE_INFO;
    pool_create_info.queueFamilyIndex = m_device->graphics_queue_node_index_;
    pool_create_info.flags = VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT;
    vkCreateCommandPool(m_device->device(), &pool_create_info, nullptr,
                        &command_pool);

    VkCommandBuffer command_buffer[2];
    VkCommandBufferAllocateInfo command_buffer_allocate_info{};
    command_buffer_allocate_info.sType =
        VK_STRUCTURE_TYPE_COMMAND_BUFFER_ALLOCATE_INFO;
    command_buffer_allocate_info.commandPool = command_pool;
    command_buffer_allocate_info.commandBufferCount = 2;
    command_buffer_allocate_info.level = VK_COMMAND_BUFFER_LEVEL_PRIMARY;
    vkAllocateCommandBuffers(m_device->device(), &command_buffer_allocate_info,
                             command_buffer);

    VkQueue queue = VK_NULL_HANDLE;
    vkGetDeviceQueue(m_device->device(), m_device->graphics_queue_node_index_,
                     1, &queue);

    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[0], &begin_info);

        vkCmdPipelineBarrier(command_buffer[0],
                             VK_PIPELINE_STAGE_ALL_COMMANDS_BIT,
                             VK_PIPELINE_STAGE_ALL_COMMANDS_BIT, 0, 0, nullptr,
                             0, nullptr, 0, nullptr);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[0], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[0]);
    }
    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[1], &begin_info);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[1], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[1]);
    }
    {
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer[0];
        submit_info.signalSemaphoreCount = 1;
        submit_info.pSignalSemaphores = &semaphore;
        vkQueueSubmit(queue, 1, &submit_info, VK_NULL_HANDLE);
    }
    {
        VkPipelineStageFlags flags[]{VK_PIPELINE_STAGE_ALL_COMMANDS_BIT};
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer[1];
        submit_info.waitSemaphoreCount = 1;
        submit_info.pWaitSemaphores = &semaphore;
        submit_info.pWaitDstStageMask = flags;
        vkQueueSubmit(m_device->m_queue, 1, &submit_info, fence);
    }

    vkQueueWaitIdle(m_device->m_queue);

    vkDestroyFence(m_device->device(), fence, nullptr);
    vkDestroySemaphore(m_device->device(), semaphore, nullptr);
    vkFreeCommandBuffers(m_device->device(), command_pool, 2,
                         &command_buffer[0]);
    vkDestroyCommandPool(m_device->device(), command_pool, NULL);

    m_errorMonitor->VerifyNotFound();
}

// This is a positive test.  No errors should be generated.
TEST_F(VkLayerTest,
       TwoQueueSubmitsSeparateQueuesWithSemaphoreAndOneFenceTwoWFF) {

    TEST_DESCRIPTION(
        "Two command buffers, each in a separate QueueSubmit call "
        "submitted on separate queues, the second having a fence"
        "followed by two consecutive WaitForFences calls on the same fence.");

    if ((m_device->queue_props.empty()) ||
        (m_device->queue_props[0].queueCount < 2))
        return;

    m_errorMonitor->ExpectSuccess();

    VkFence fence;
    VkFenceCreateInfo fence_create_info{};
    fence_create_info.sType = VK_STRUCTURE_TYPE_FENCE_CREATE_INFO;
    vkCreateFence(m_device->device(), &fence_create_info, nullptr, &fence);

    VkSemaphore semaphore;
    VkSemaphoreCreateInfo semaphore_create_info{};
    semaphore_create_info.sType = VK_STRUCTURE_TYPE_SEMAPHORE_CREATE_INFO;
    vkCreateSemaphore(m_device->device(), &semaphore_create_info, nullptr,
                      &semaphore);

    VkCommandPool command_pool;
    VkCommandPoolCreateInfo pool_create_info{};
    pool_create_info.sType = VK_STRUCTURE_TYPE_COMMAND_POOL_CREATE_INFO;
    pool_create_info.queueFamilyIndex = m_device->graphics_queue_node_index_;
    pool_create_info.flags = VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT;
    vkCreateCommandPool(m_device->device(), &pool_create_info, nullptr,
                        &command_pool);

    VkCommandBuffer command_buffer[2];
    VkCommandBufferAllocateInfo command_buffer_allocate_info{};
    command_buffer_allocate_info.sType =
        VK_STRUCTURE_TYPE_COMMAND_BUFFER_ALLOCATE_INFO;
    command_buffer_allocate_info.commandPool = command_pool;
    command_buffer_allocate_info.commandBufferCount = 2;
    command_buffer_allocate_info.level = VK_COMMAND_BUFFER_LEVEL_PRIMARY;
    vkAllocateCommandBuffers(m_device->device(), &command_buffer_allocate_info,
                             command_buffer);

    VkQueue queue = VK_NULL_HANDLE;
    vkGetDeviceQueue(m_device->device(), m_device->graphics_queue_node_index_,
                     1, &queue);

    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[0], &begin_info);

        vkCmdPipelineBarrier(command_buffer[0],
                             VK_PIPELINE_STAGE_ALL_COMMANDS_BIT,
                             VK_PIPELINE_STAGE_ALL_COMMANDS_BIT, 0, 0, nullptr,
                             0, nullptr, 0, nullptr);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[0], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[0]);
    }
    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[1], &begin_info);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[1], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[1]);
    }
    {
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer[0];
        submit_info.signalSemaphoreCount = 1;
        submit_info.pSignalSemaphores = &semaphore;
        vkQueueSubmit(queue, 1, &submit_info, VK_NULL_HANDLE);
    }
    {
        VkPipelineStageFlags flags[]{VK_PIPELINE_STAGE_ALL_COMMANDS_BIT};
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer[1];
        submit_info.waitSemaphoreCount = 1;
        submit_info.pWaitSemaphores = &semaphore;
        submit_info.pWaitDstStageMask = flags;
        vkQueueSubmit(m_device->m_queue, 1, &submit_info, fence);
    }

    vkWaitForFences(m_device->device(), 1, &fence, VK_TRUE, UINT64_MAX);
    vkWaitForFences(m_device->device(), 1, &fence, VK_TRUE, UINT64_MAX);

    vkDestroyFence(m_device->device(), fence, nullptr);
    vkDestroySemaphore(m_device->device(), semaphore, nullptr);
    vkFreeCommandBuffers(m_device->device(), command_pool, 2,
                         &command_buffer[0]);
    vkDestroyCommandPool(m_device->device(), command_pool, NULL);

    m_errorMonitor->VerifyNotFound();
}

// This is a positive test.  No errors should be generated.
TEST_F(VkLayerTest, TwoQueueSubmitsSeparateQueuesWithSemaphoreAndOneFence) {

    TEST_DESCRIPTION("Two command buffers, each in a separate QueueSubmit call "
                     "submitted on separate queues, the second having a fence, "
                     "followed by a WaitForFences call.");

    if ((m_device->queue_props.empty()) ||
        (m_device->queue_props[0].queueCount < 2))
        return;

    m_errorMonitor->ExpectSuccess();

    VkFence fence;
    VkFenceCreateInfo fence_create_info{};
    fence_create_info.sType = VK_STRUCTURE_TYPE_FENCE_CREATE_INFO;
    vkCreateFence(m_device->device(), &fence_create_info, nullptr, &fence);

    VkSemaphore semaphore;
    VkSemaphoreCreateInfo semaphore_create_info{};
    semaphore_create_info.sType = VK_STRUCTURE_TYPE_SEMAPHORE_CREATE_INFO;
    vkCreateSemaphore(m_device->device(), &semaphore_create_info, nullptr,
                      &semaphore);

    VkCommandPool command_pool;
    VkCommandPoolCreateInfo pool_create_info{};
    pool_create_info.sType = VK_STRUCTURE_TYPE_COMMAND_POOL_CREATE_INFO;
    pool_create_info.queueFamilyIndex = m_device->graphics_queue_node_index_;
    pool_create_info.flags = VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT;
    vkCreateCommandPool(m_device->device(), &pool_create_info, nullptr,
                        &command_pool);

    VkCommandBuffer command_buffer[2];
    VkCommandBufferAllocateInfo command_buffer_allocate_info{};
    command_buffer_allocate_info.sType =
        VK_STRUCTURE_TYPE_COMMAND_BUFFER_ALLOCATE_INFO;
    command_buffer_allocate_info.commandPool = command_pool;
    command_buffer_allocate_info.commandBufferCount = 2;
    command_buffer_allocate_info.level = VK_COMMAND_BUFFER_LEVEL_PRIMARY;
    vkAllocateCommandBuffers(m_device->device(), &command_buffer_allocate_info,
                             command_buffer);

    VkQueue queue = VK_NULL_HANDLE;
    vkGetDeviceQueue(m_device->device(), m_device->graphics_queue_node_index_,
                     1, &queue);


    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[0], &begin_info);

        vkCmdPipelineBarrier(command_buffer[0],
                             VK_PIPELINE_STAGE_ALL_COMMANDS_BIT,
                             VK_PIPELINE_STAGE_ALL_COMMANDS_BIT, 0, 0, nullptr,
                             0, nullptr, 0, nullptr);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[0], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[0]);
    }
    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[1], &begin_info);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[1], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[1]);
    }
    {
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer[0];
        submit_info.signalSemaphoreCount = 1;
        submit_info.pSignalSemaphores = &semaphore;
        vkQueueSubmit(queue, 1, &submit_info, VK_NULL_HANDLE);
    }
    {
        VkPipelineStageFlags flags[]{VK_PIPELINE_STAGE_ALL_COMMANDS_BIT};
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer[1];
        submit_info.waitSemaphoreCount = 1;
        submit_info.pWaitSemaphores = &semaphore;
        submit_info.pWaitDstStageMask = flags;
        vkQueueSubmit(m_device->m_queue, 1, &submit_info, fence);
    }

    vkWaitForFences(m_device->device(), 1, &fence, VK_TRUE, UINT64_MAX);

    vkDestroyFence(m_device->device(), fence, nullptr);
    vkDestroySemaphore(m_device->device(), semaphore, nullptr);
    vkFreeCommandBuffers(m_device->device(), command_pool, 2,
                         &command_buffer[0]);
    vkDestroyCommandPool(m_device->device(), command_pool, NULL);

    m_errorMonitor->VerifyNotFound();
}

// This is a positive test.  No errors should be generated.
TEST_F(VkLayerTest, TwoQueueSubmitsOneQueueWithSemaphoreAndOneFence) {

    TEST_DESCRIPTION("Two command buffers, each in a separate QueueSubmit call "
                     "on the same queue, sharing a signal/wait semaphore, the "
                     "second having a fence, "
                     "followed by a WaitForFences call.");

    m_errorMonitor->ExpectSuccess();

    VkFence fence;
    VkFenceCreateInfo fence_create_info{};
    fence_create_info.sType = VK_STRUCTURE_TYPE_FENCE_CREATE_INFO;
    vkCreateFence(m_device->device(), &fence_create_info, nullptr, &fence);

    VkSemaphore semaphore;
    VkSemaphoreCreateInfo semaphore_create_info{};
    semaphore_create_info.sType = VK_STRUCTURE_TYPE_SEMAPHORE_CREATE_INFO;
    vkCreateSemaphore(m_device->device(), &semaphore_create_info, nullptr,
                      &semaphore);

    VkCommandPool command_pool;
    VkCommandPoolCreateInfo pool_create_info{};
    pool_create_info.sType = VK_STRUCTURE_TYPE_COMMAND_POOL_CREATE_INFO;
    pool_create_info.queueFamilyIndex = m_device->graphics_queue_node_index_;
    pool_create_info.flags = VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT;
    vkCreateCommandPool(m_device->device(), &pool_create_info, nullptr,
                        &command_pool);

    VkCommandBuffer command_buffer[2];
    VkCommandBufferAllocateInfo command_buffer_allocate_info{};
    command_buffer_allocate_info.sType =
        VK_STRUCTURE_TYPE_COMMAND_BUFFER_ALLOCATE_INFO;
    command_buffer_allocate_info.commandPool = command_pool;
    command_buffer_allocate_info.commandBufferCount = 2;
    command_buffer_allocate_info.level = VK_COMMAND_BUFFER_LEVEL_PRIMARY;
    vkAllocateCommandBuffers(m_device->device(), &command_buffer_allocate_info,
                             command_buffer);

    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[0], &begin_info);

        vkCmdPipelineBarrier(command_buffer[0],
                             VK_PIPELINE_STAGE_ALL_COMMANDS_BIT,
                             VK_PIPELINE_STAGE_ALL_COMMANDS_BIT, 0, 0, nullptr,
                             0, nullptr, 0, nullptr);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[0], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[0]);
    }
    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[1], &begin_info);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[1], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[1]);
    }
    {
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer[0];
        submit_info.signalSemaphoreCount = 1;
        submit_info.pSignalSemaphores = &semaphore;
        vkQueueSubmit(m_device->m_queue, 1, &submit_info, VK_NULL_HANDLE);
    }
    {
        VkPipelineStageFlags flags[]{VK_PIPELINE_STAGE_ALL_COMMANDS_BIT};
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer[1];
        submit_info.waitSemaphoreCount = 1;
        submit_info.pWaitSemaphores = &semaphore;
        submit_info.pWaitDstStageMask = flags;
        vkQueueSubmit(m_device->m_queue, 1, &submit_info, fence);
    }

    vkWaitForFences(m_device->device(), 1, &fence, VK_TRUE, UINT64_MAX);

    vkDestroyFence(m_device->device(), fence, nullptr);
    vkDestroySemaphore(m_device->device(), semaphore, nullptr);
    vkFreeCommandBuffers(m_device->device(), command_pool, 2,
                         &command_buffer[0]);
    vkDestroyCommandPool(m_device->device(), command_pool, NULL);

    m_errorMonitor->VerifyNotFound();
}

// This is a positive test.  No errors should be generated.
TEST_F(VkLayerTest, TwoQueueSubmitsOneQueueNullQueueSubmitWithFence) {

    TEST_DESCRIPTION(
        "Two command buffers, each in a separate QueueSubmit call "
        "on the same queue, no fences, followed by a third QueueSubmit with NO "
        "SubmitInfos but with a fence, followed by a WaitForFences call.");

    m_errorMonitor->ExpectSuccess();

    VkFence fence;
    VkFenceCreateInfo fence_create_info{};
    fence_create_info.sType = VK_STRUCTURE_TYPE_FENCE_CREATE_INFO;
    vkCreateFence(m_device->device(), &fence_create_info, nullptr, &fence);

    VkCommandPool command_pool;
    VkCommandPoolCreateInfo pool_create_info{};
    pool_create_info.sType = VK_STRUCTURE_TYPE_COMMAND_POOL_CREATE_INFO;
    pool_create_info.queueFamilyIndex = m_device->graphics_queue_node_index_;
    pool_create_info.flags = VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT;
    vkCreateCommandPool(m_device->device(), &pool_create_info, nullptr,
                        &command_pool);

    VkCommandBuffer command_buffer[2];
    VkCommandBufferAllocateInfo command_buffer_allocate_info{};
    command_buffer_allocate_info.sType =
        VK_STRUCTURE_TYPE_COMMAND_BUFFER_ALLOCATE_INFO;
    command_buffer_allocate_info.commandPool = command_pool;
    command_buffer_allocate_info.commandBufferCount = 2;
    command_buffer_allocate_info.level = VK_COMMAND_BUFFER_LEVEL_PRIMARY;
    vkAllocateCommandBuffers(m_device->device(), &command_buffer_allocate_info,
                             command_buffer);

    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[0], &begin_info);

        vkCmdPipelineBarrier(command_buffer[0],
                             VK_PIPELINE_STAGE_ALL_COMMANDS_BIT,
                             VK_PIPELINE_STAGE_ALL_COMMANDS_BIT, 0, 0, nullptr,
                             0, nullptr, 0, nullptr);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[0], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[0]);
    }
    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[1], &begin_info);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[1], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[1]);
    }
    {
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer[0];
        submit_info.signalSemaphoreCount = 0;
        submit_info.pSignalSemaphores = VK_NULL_HANDLE;
        vkQueueSubmit(m_device->m_queue, 1, &submit_info, VK_NULL_HANDLE);
    }
    {
        VkPipelineStageFlags flags[]{VK_PIPELINE_STAGE_ALL_COMMANDS_BIT};
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer[1];
        submit_info.waitSemaphoreCount = 0;
        submit_info.pWaitSemaphores = VK_NULL_HANDLE;
        submit_info.pWaitDstStageMask = flags;
        vkQueueSubmit(m_device->m_queue, 1, &submit_info, VK_NULL_HANDLE);
    }

    vkQueueSubmit(m_device->m_queue, 0, NULL, fence);

    vkWaitForFences(m_device->device(), 1, &fence, VK_TRUE, UINT64_MAX);

    vkDestroyFence(m_device->device(), fence, nullptr);
    vkFreeCommandBuffers(m_device->device(), command_pool, 2,
                         &command_buffer[0]);
    vkDestroyCommandPool(m_device->device(), command_pool, NULL);

    m_errorMonitor->VerifyNotFound();
}

// This is a positive test.  No errors should be generated.
TEST_F(VkLayerTest, TwoQueueSubmitsOneQueueOneFence) {

    TEST_DESCRIPTION("Two command buffers, each in a separate QueueSubmit call "
                     "on the same queue, the second having a fence, followed "
                     "by a WaitForFences call.");

    m_errorMonitor->ExpectSuccess();

    VkFence fence;
    VkFenceCreateInfo fence_create_info{};
    fence_create_info.sType = VK_STRUCTURE_TYPE_FENCE_CREATE_INFO;
    vkCreateFence(m_device->device(), &fence_create_info, nullptr, &fence);

    VkCommandPool command_pool;
    VkCommandPoolCreateInfo pool_create_info{};
    pool_create_info.sType = VK_STRUCTURE_TYPE_COMMAND_POOL_CREATE_INFO;
    pool_create_info.queueFamilyIndex = m_device->graphics_queue_node_index_;
    pool_create_info.flags = VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT;
    vkCreateCommandPool(m_device->device(), &pool_create_info, nullptr,
                        &command_pool);

    VkCommandBuffer command_buffer[2];
    VkCommandBufferAllocateInfo command_buffer_allocate_info{};
    command_buffer_allocate_info.sType =
        VK_STRUCTURE_TYPE_COMMAND_BUFFER_ALLOCATE_INFO;
    command_buffer_allocate_info.commandPool = command_pool;
    command_buffer_allocate_info.commandBufferCount = 2;
    command_buffer_allocate_info.level = VK_COMMAND_BUFFER_LEVEL_PRIMARY;
    vkAllocateCommandBuffers(m_device->device(), &command_buffer_allocate_info,
                             command_buffer);

    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[0], &begin_info);

        vkCmdPipelineBarrier(command_buffer[0],
                             VK_PIPELINE_STAGE_ALL_COMMANDS_BIT,
                             VK_PIPELINE_STAGE_ALL_COMMANDS_BIT, 0, 0, nullptr,
                             0, nullptr, 0, nullptr);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[0], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[0]);
    }
    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[1], &begin_info);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[1], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[1]);
    }
    {
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer[0];
        submit_info.signalSemaphoreCount = 0;
        submit_info.pSignalSemaphores = VK_NULL_HANDLE;
        vkQueueSubmit(m_device->m_queue, 1, &submit_info, VK_NULL_HANDLE);
    }
    {
        VkPipelineStageFlags flags[]{VK_PIPELINE_STAGE_ALL_COMMANDS_BIT};
        VkSubmitInfo submit_info{};
        submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info.commandBufferCount = 1;
        submit_info.pCommandBuffers = &command_buffer[1];
        submit_info.waitSemaphoreCount = 0;
        submit_info.pWaitSemaphores = VK_NULL_HANDLE;
        submit_info.pWaitDstStageMask = flags;
        vkQueueSubmit(m_device->m_queue, 1, &submit_info, fence);
    }

    vkWaitForFences(m_device->device(), 1, &fence, VK_TRUE, UINT64_MAX);

    vkDestroyFence(m_device->device(), fence, nullptr);
    vkFreeCommandBuffers(m_device->device(), command_pool, 2,
                         &command_buffer[0]);
    vkDestroyCommandPool(m_device->device(), command_pool, NULL);

    m_errorMonitor->VerifyNotFound();
}

// This is a positive test.  No errors should be generated.
TEST_F(VkLayerTest, TwoSubmitInfosWithSemaphoreOneQueueSubmitsOneFence) {

    TEST_DESCRIPTION(
        "Two command buffers each in a separate SubmitInfo sent in a single "
        "QueueSubmit call followed by a WaitForFences call.");

    m_errorMonitor->ExpectSuccess();

    VkFence fence;
    VkFenceCreateInfo fence_create_info{};
    fence_create_info.sType = VK_STRUCTURE_TYPE_FENCE_CREATE_INFO;
    vkCreateFence(m_device->device(), &fence_create_info, nullptr, &fence);

    VkSemaphore semaphore;
    VkSemaphoreCreateInfo semaphore_create_info{};
    semaphore_create_info.sType = VK_STRUCTURE_TYPE_SEMAPHORE_CREATE_INFO;
    vkCreateSemaphore(m_device->device(), &semaphore_create_info, nullptr,
                      &semaphore);

    VkCommandPool command_pool;
    VkCommandPoolCreateInfo pool_create_info{};
    pool_create_info.sType = VK_STRUCTURE_TYPE_COMMAND_POOL_CREATE_INFO;
    pool_create_info.queueFamilyIndex = m_device->graphics_queue_node_index_;
    pool_create_info.flags = VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT;
    vkCreateCommandPool(m_device->device(), &pool_create_info, nullptr,
                        &command_pool);

    VkCommandBuffer command_buffer[2];
    VkCommandBufferAllocateInfo command_buffer_allocate_info{};
    command_buffer_allocate_info.sType =
        VK_STRUCTURE_TYPE_COMMAND_BUFFER_ALLOCATE_INFO;
    command_buffer_allocate_info.commandPool = command_pool;
    command_buffer_allocate_info.commandBufferCount = 2;
    command_buffer_allocate_info.level = VK_COMMAND_BUFFER_LEVEL_PRIMARY;
    vkAllocateCommandBuffers(m_device->device(), &command_buffer_allocate_info,
                             command_buffer);

    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[0], &begin_info);

        vkCmdPipelineBarrier(command_buffer[0],
                             VK_PIPELINE_STAGE_ALL_COMMANDS_BIT,
                             VK_PIPELINE_STAGE_ALL_COMMANDS_BIT, 0, 0, nullptr,
                             0, nullptr, 0, nullptr);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[0], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[0]);
    }
    {
        VkCommandBufferBeginInfo begin_info{};
        begin_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
        vkBeginCommandBuffer(command_buffer[1], &begin_info);

        VkViewport viewport{};
        viewport.maxDepth = 1.0f;
        viewport.minDepth = 0.0f;
        viewport.width = 512;
        viewport.height = 512;
        viewport.x = 0;
        viewport.y = 0;
        vkCmdSetViewport(command_buffer[1], 0, 1, &viewport);
        vkEndCommandBuffer(command_buffer[1]);
    }
    {
        VkSubmitInfo submit_info[2];
        VkPipelineStageFlags flags[]{VK_PIPELINE_STAGE_ALL_COMMANDS_BIT};

        submit_info[0].sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info[0].pNext = NULL;
        submit_info[0].commandBufferCount = 1;
        submit_info[0].pCommandBuffers = &command_buffer[0];
        submit_info[0].signalSemaphoreCount = 1;
        submit_info[0].pSignalSemaphores = &semaphore;
        submit_info[0].waitSemaphoreCount = 0;
        submit_info[0].pWaitSemaphores = NULL;
        submit_info[0].pWaitDstStageMask = 0;

        submit_info[1].sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
        submit_info[1].pNext = NULL;
        submit_info[1].commandBufferCount = 1;
        submit_info[1].pCommandBuffers = &command_buffer[1];
        submit_info[1].waitSemaphoreCount = 1;
        submit_info[1].pWaitSemaphores = &semaphore;
        submit_info[1].pWaitDstStageMask = flags;
        submit_info[1].signalSemaphoreCount = 0;
        submit_info[1].pSignalSemaphores = NULL;
        vkQueueSubmit(m_device->m_queue, 2, &submit_info[0], fence);
    }

    vkWaitForFences(m_device->device(), 1, &fence, VK_TRUE, UINT64_MAX);

    vkDestroyFence(m_device->device(), fence, nullptr);
    vkFreeCommandBuffers(m_device->device(), command_pool, 2,
                         &command_buffer[0]);
    vkDestroyCommandPool(m_device->device(), command_pool, NULL);
    vkDestroySemaphore(m_device->device(), semaphore, nullptr);

    m_errorMonitor->VerifyNotFound();
}

TEST_F(VkLayerTest, DynamicDepthBiasNotBound) {
    TEST_DESCRIPTION(
        "Run a simple draw calls to validate failure when Depth Bias dynamic "
        "state is required but not correctly bound.");

    // Dynamic depth bias
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Dynamic depth bias state not set for this command buffer");
    VKTriangleTest(bindStateVertShaderText, bindStateFragShaderText,
                   BsoFailDepthBias);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, DynamicLineWidthNotBound) {
    TEST_DESCRIPTION(
        "Run a simple draw calls to validate failure when Line Width dynamic "
        "state is required but not correctly bound.");

    // Dynamic line width
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Dynamic line width state not set for this command buffer");
    VKTriangleTest(bindStateVertShaderText, bindStateFragShaderText,
                   BsoFailLineWidth);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, DynamicViewportNotBound) {
    TEST_DESCRIPTION(
        "Run a simple draw calls to validate failure when Viewport dynamic "
        "state is required but not correctly bound.");

    // Dynamic viewport state
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Dynamic viewport state not set for this command buffer");
    VKTriangleTest(bindStateVertShaderText, bindStateFragShaderText,
                   BsoFailViewport);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, DynamicScissorNotBound) {
    TEST_DESCRIPTION(
        "Run a simple draw calls to validate failure when Scissor dynamic "
        "state is required but not correctly bound.");

    // Dynamic scissor state
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Dynamic scissor state not set for this command buffer");
    VKTriangleTest(bindStateVertShaderText, bindStateFragShaderText,
                   BsoFailScissor);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, DynamiBlendConstantsNotBound) {
    TEST_DESCRIPTION(
        "Run a simple draw calls to validate failure when Blend Constants "
        "dynamic state is required but not correctly bound.");
    // Dynamic blend constant state
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Dynamic blend constants state not set for this command buffer");
    VKTriangleTest(bindStateVertShaderText, bindStateFragShaderText,
                   BsoFailBlend);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, DynamicDepthBoundsNotBound) {
    TEST_DESCRIPTION(
        "Run a simple draw calls to validate failure when Depth Bounds dynamic "
        "state is required but not correctly bound.");
    if (!m_device->phy().features().depthBounds) {
        printf("Device does not support depthBounds test; skipped.\n");
        return;
    }
    // Dynamic depth bounds
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Dynamic depth bounds state not set for this command buffer");
    VKTriangleTest(bindStateVertShaderText, bindStateFragShaderText,
                   BsoFailDepthBounds);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, DynamicStencilReadNotBound) {
    TEST_DESCRIPTION(
        "Run a simple draw calls to validate failure when Stencil Read dynamic "
        "state is required but not correctly bound.");
    // Dynamic stencil read mask
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Dynamic stencil read mask state not set for this command buffer");
    VKTriangleTest(bindStateVertShaderText, bindStateFragShaderText,
                   BsoFailStencilReadMask);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, DynamicStencilWriteNotBound) {
    TEST_DESCRIPTION(
        "Run a simple draw calls to validate failure when Stencil Write dynamic"
        " state is required but not correctly bound.");
    // Dynamic stencil write mask
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Dynamic stencil write mask state not set for this command buffer");
    VKTriangleTest(bindStateVertShaderText, bindStateFragShaderText,
                   BsoFailStencilWriteMask);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, DynamicStencilRefNotBound) {
    TEST_DESCRIPTION(
        "Run a simple draw calls to validate failure when Stencil Ref dynamic "
        "state is required but not correctly bound.");
    // Dynamic stencil reference
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Dynamic stencil reference state not set for this command buffer");
    VKTriangleTest(bindStateVertShaderText, bindStateFragShaderText,
                   BsoFailStencilReference);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CommandBufferTwoSubmits) {
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "was begun w/ VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT set, but has "
        "been submitted");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitViewport());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    // We luck out b/c by default the framework creates CB w/ the
    // VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT set
    BeginCommandBuffer();
    m_commandBuffer->ClearAllBuffers(m_clear_color, m_depth_clear_color,
                                     m_stencil_clear_color, NULL);
    EndCommandBuffer();

    // Bypass framework since it does the waits automatically
    VkResult err = VK_SUCCESS;
    VkSubmitInfo submit_info;
    submit_info.sType = VK_STRUCTURE_TYPE_SUBMIT_INFO;
    submit_info.pNext = NULL;
    submit_info.waitSemaphoreCount = 0;
    submit_info.pWaitSemaphores = NULL;
    submit_info.pWaitDstStageMask = NULL;
    submit_info.commandBufferCount = 1;
    submit_info.pCommandBuffers = &m_commandBuffer->handle();
    submit_info.signalSemaphoreCount = 0;
    submit_info.pSignalSemaphores = NULL;

    err = vkQueueSubmit(m_device->m_queue, 1, &submit_info, VK_NULL_HANDLE);
    ASSERT_VK_SUCCESS(err);

    // Cause validation error by re-submitting cmd buffer that should only be
    // submitted once
    err = vkQueueSubmit(m_device->m_queue, 1, &submit_info, VK_NULL_HANDLE);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, AllocDescriptorFromEmptyPool) {
    // Initiate Draw w/o a PSO bound
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Unable to allocate 1 descriptors of "
                                         "type "
                                         "VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER ");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    // Create Pool w/ 1 Sampler descriptor, but try to alloc Uniform Buffer
    // descriptor from it
    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_SAMPLER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.flags = 0;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);

    m_errorMonitor->VerifyFound();

    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, FreeDescriptorFromOneShotPool) {
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "It is invalid to call vkFreeDescriptorSets() with a pool created "
        "without setting VK_DESCRIPTOR_POOL_CREATE_FREE_DESCRIPTOR_SET_BIT.");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.flags = 0;
    // Not specifying VK_DESCRIPTOR_POOL_CREATE_FREE_DESCRIPTOR_SET_BIT means
    // app can only call vkResetDescriptorPool on this pool.;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    err = vkFreeDescriptorSets(m_device->device(), ds_pool, 1, &descriptorSet);
    m_errorMonitor->VerifyFound();

    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, InvalidDescriptorPool) {
    // Attempt to clear Descriptor Pool with bad object.
    // ObjectTracker should catch this.
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Invalid VkDescriptorPool Object 0xbaad6001");
    uint64_t fake_pool_handle = 0xbaad6001;
    VkDescriptorPool bad_pool = reinterpret_cast<VkDescriptorPool &>(fake_pool_handle);
    vkResetDescriptorPool(device(), bad_pool, 0);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, InvalidDescriptorSet) {
    // Attempt to bind an invalid Descriptor Set to a valid Command Buffer
    // ObjectTracker should catch this.
    // Create a valid cmd buffer
    // call vkCmdBindDescriptorSets w/ false Descriptor Set

    uint64_t fake_set_handle = 0xbaad6001;
    VkDescriptorSet bad_set = reinterpret_cast<VkDescriptorSet &>(fake_set_handle);
    VkResult err;
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Invalid VkDescriptorSet Object 0xbaad6001");

    ASSERT_NO_FATAL_FAILURE(InitState());

    VkDescriptorSetLayoutBinding layout_bindings[1] = {};
    layout_bindings[0].binding = 0;
    layout_bindings[0].descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    layout_bindings[0].descriptorCount = 1;
    layout_bindings[0].stageFlags = VK_SHADER_STAGE_VERTEX_BIT;
    layout_bindings[0].pImmutableSamplers = NULL;

    VkDescriptorSetLayout descriptor_set_layout;
    VkDescriptorSetLayoutCreateInfo dslci = {};
    dslci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    dslci.pNext = NULL;
    dslci.bindingCount = 1;
    dslci.pBindings = layout_bindings;
    err = vkCreateDescriptorSetLayout(device(), &dslci, NULL, &descriptor_set_layout);
    ASSERT_VK_SUCCESS(err);

    VkPipelineLayout pipeline_layout;
    VkPipelineLayoutCreateInfo plci = {};
    plci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    plci.pNext = NULL;
    plci.setLayoutCount = 1;
    plci.pSetLayouts = &descriptor_set_layout;
    err = vkCreatePipelineLayout(device(), &plci, NULL, &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    BeginCommandBuffer();
    vkCmdBindDescriptorSets(m_commandBuffer->GetBufferHandle(), VK_PIPELINE_BIND_POINT_GRAPHICS,
                            pipeline_layout, 0, 1, &bad_set, 0, NULL);
    m_errorMonitor->VerifyFound();
    EndCommandBuffer();
    vkDestroyPipelineLayout(device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(device(), descriptor_set_layout, NULL);
}

TEST_F(VkLayerTest, InvalidDescriptorSetLayout) {
    // Attempt to create a Pipeline Layout with an invalid Descriptor Set Layout.
    // ObjectTracker should catch this.
    uint64_t fake_layout_handle = 0xbaad6001;
    VkDescriptorSetLayout bad_layout = reinterpret_cast<VkDescriptorSetLayout &>(fake_layout_handle);
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Invalid VkDescriptorSetLayout Object 0xbaad6001");

    VkPipelineLayout pipeline_layout;
    VkPipelineLayoutCreateInfo plci = {};
    plci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    plci.pNext = NULL;
    plci.setLayoutCount = 1;
    plci.pSetLayouts = &bad_layout;
    vkCreatePipelineLayout(device(), &plci, NULL, &pipeline_layout);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, WriteDescriptorSetIntegrityCheck) {
    TEST_DESCRIPTION("This test verifies some requirements of chapter 13.2.3 of the Vulkan Spec "
                     "1) A uniform buffer update must have a valid buffer index."
                     "2) When using an array of descriptors in a single WriteDescriptor,"
                     "     the descriptor types and stageflags must all be the same."
                     "3) Immutable Sampler state must match across descriptors");

    const char *invalid_BufferInfo_ErrorMessage =
            "vkUpdateDescriptorSets: if pDescriptorWrites[0].descriptorType is VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER, "
            "VK_DESCRIPTOR_TYPE_STORAGE_BUFFER, VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC or "
            "VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC, pDescriptorWrites[0].pBufferInfo must not be NULL";
    const char *stateFlag_ErrorMessage =
            "Attempting write update to descriptor set 0000000000000005 binding #0 "
            "with #2 descriptors being updated but this update oversteps the bounds";
    const char *immutable_ErrorMessage =
            "Attempting write update to descriptor set 0000000000000005 binding #1 "
            "with #2 descriptors being updated but this update oversteps the bounds";

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT, invalid_BufferInfo_ErrorMessage);

    ASSERT_NO_FATAL_FAILURE(InitState());
    VkDescriptorPoolSize ds_type_count[4] = {};
    ds_type_count[0].type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count[0].descriptorCount = 1;
    ds_type_count[1].type = VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER;
    ds_type_count[1].descriptorCount = 1;
    ds_type_count[2].type = VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER;
    ds_type_count[2].descriptorCount = 1;
    ds_type_count[3].type = VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT;
    ds_type_count[3].descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = sizeof(ds_type_count) / sizeof(VkDescriptorPoolSize);
    ds_pool_ci.pPoolSizes = ds_type_count;

    VkDescriptorPool ds_pool;
    VkResult err = vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding layout_binding[3] = {};
    layout_binding[0].binding = 0;
    layout_binding[0].descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    layout_binding[0].descriptorCount = 1;
    layout_binding[0].stageFlags = VK_SHADER_STAGE_ALL;
    layout_binding[0].pImmutableSamplers = NULL;

    layout_binding[1].binding = 1;
    layout_binding[1].descriptorType = VK_DESCRIPTOR_TYPE_SAMPLER;
    layout_binding[1].descriptorCount = 1;
    layout_binding[1].stageFlags = VK_SHADER_STAGE_FRAGMENT_BIT;
    layout_binding[1].pImmutableSamplers = NULL;

    VkSamplerCreateInfo sampler_ci = {};
    sampler_ci.sType = VK_STRUCTURE_TYPE_SAMPLER_CREATE_INFO;
    sampler_ci.pNext = NULL;
    sampler_ci.magFilter = VK_FILTER_NEAREST;
    sampler_ci.minFilter = VK_FILTER_NEAREST;
    sampler_ci.mipmapMode = VK_SAMPLER_MIPMAP_MODE_NEAREST;
    sampler_ci.addressModeU = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.addressModeV = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.addressModeW = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.mipLodBias = 1.0;
    sampler_ci.anisotropyEnable = VK_FALSE;
    sampler_ci.maxAnisotropy = 1;
    sampler_ci.compareEnable = VK_FALSE;
    sampler_ci.compareOp = VK_COMPARE_OP_NEVER;
    sampler_ci.minLod = 1.0;
    sampler_ci.maxLod = 1.0;
    sampler_ci.borderColor = VK_BORDER_COLOR_FLOAT_OPAQUE_WHITE;
    sampler_ci.unnormalizedCoordinates = VK_FALSE;
    VkSampler sampler;

    err = vkCreateSampler(m_device->device(), &sampler_ci, NULL, &sampler);
    ASSERT_VK_SUCCESS(err);

    layout_binding[2].binding = 2;
    layout_binding[2].descriptorType = VK_DESCRIPTOR_TYPE_SAMPLER;
    layout_binding[2].descriptorCount = 1;
    layout_binding[2].stageFlags = VK_SHADER_STAGE_FRAGMENT_BIT;
    layout_binding[2].pImmutableSamplers = static_cast<VkSampler *>(&sampler);

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.bindingCount = sizeof(layout_binding) / sizeof(VkDescriptorSetLayoutBinding);
    ds_layout_ci.pBindings = layout_binding;
    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL, &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    VkDescriptorSet descriptorSet;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info, &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.pNext = NULL;
    pipeline_layout_ci.setLayoutCount = 1;
    pipeline_layout_ci.pSetLayouts = &ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL, &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    VkWriteDescriptorSet descriptor_write {};
    descriptor_write.sType = VK_STRUCTURE_TYPE_WRITE_DESCRIPTOR_SET;
    descriptor_write.dstSet = descriptorSet;
    descriptor_write.dstBinding = 0;
    descriptor_write.descriptorCount = 1;
    descriptor_write.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;

    vkUpdateDescriptorSets(m_device->device(), 1, &descriptor_write, 0, NULL);
    m_errorMonitor->VerifyFound();

    // Create a buffer to update the descriptor with
    uint32_t qfi = 0;
    VkBufferCreateInfo buffCI = {};
    buffCI.sType = VK_STRUCTURE_TYPE_BUFFER_CREATE_INFO;
    buffCI.size = 1024;
    buffCI.usage = VK_BUFFER_USAGE_UNIFORM_BUFFER_BIT;
    buffCI.queueFamilyIndexCount = 1;
    buffCI.pQueueFamilyIndices = &qfi;

    VkBuffer dyub;
    err = vkCreateBuffer(m_device->device(), &buffCI, NULL, &dyub);
    ASSERT_VK_SUCCESS(err);
    VkDescriptorBufferInfo buffInfo = {};
    buffInfo.buffer = dyub;
    buffInfo.offset = 0;
    buffInfo.range = 1024;

    descriptor_write.pBufferInfo = &buffInfo;
    descriptor_write.descriptorCount = 2;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT, stateFlag_ErrorMessage);
    vkUpdateDescriptorSets(m_device->device(), 1, &descriptor_write, 0, NULL);
    m_errorMonitor->VerifyFound();

    descriptor_write.dstBinding = 1;
    descriptor_write.descriptorType = VK_DESCRIPTOR_TYPE_SAMPLER;
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT, immutable_ErrorMessage);
    vkUpdateDescriptorSets(m_device->device(), 1, &descriptor_write, 0, NULL);
    m_errorMonitor->VerifyFound();

    vkDestroyBuffer(m_device->device(), dyub, NULL);
    vkDestroySampler(m_device->device(), sampler, NULL);
    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, InvalidPipeline) {
    // Attempt to bind an invalid Pipeline to a valid Command Buffer
    // ObjectTracker should catch this.
    // Create a valid cmd buffer
    // call vkCmdBindPipeline w/ false Pipeline
    uint64_t fake_pipeline_handle = 0xbaad6001;
    VkPipeline bad_pipeline = reinterpret_cast<VkPipeline &>(fake_pipeline_handle);
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Invalid VkPipeline Object 0xbaad6001");
    ASSERT_NO_FATAL_FAILURE(InitState());
    BeginCommandBuffer();
    vkCmdBindPipeline(m_commandBuffer->GetBufferHandle(),
                      VK_PIPELINE_BIND_POINT_GRAPHICS, bad_pipeline);
    m_errorMonitor->VerifyFound();
    // Now issue a draw call with no pipeline bound
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "At Draw/Dispatch time no valid VkPipeline is bound!");

    BeginCommandBuffer();
    Draw(1, 0, 0, 0);
    m_errorMonitor->VerifyFound();
    // Finally same check once more but with Dispatch/Compute
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "At Draw/Dispatch time no valid VkPipeline is bound!");
    BeginCommandBuffer();
    vkCmdDispatch(m_commandBuffer->GetBufferHandle(), 0, 0, 0);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, DescriptorSetNotUpdated) {
    // Create and update CommandBuffer then call QueueSubmit w/o calling End on
    // CommandBuffer
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_WARNING_BIT_EXT,
                                         " bound but it was never updated. ");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitViewport());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());
    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;
    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.pNext = NULL;
    pipeline_layout_ci.setLayoutCount = 1;
    pipeline_layout_ci.pSetLayouts = &ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    VkShaderObj vs(m_device, bindStateVertShaderText,
                   VK_SHADER_STAGE_VERTEX_BIT, this);
    //  We shouldn't need a fragment shader but add it to be able to run
    //  on more devices
    VkShaderObj fs(m_device, bindStateFragShaderText,
                   VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);
    pipe.AddColorAttachment();
    pipe.CreateVKPipeline(pipeline_layout, renderPass());

    BeginCommandBuffer();
    vkCmdBindPipeline(m_commandBuffer->GetBufferHandle(),
                      VK_PIPELINE_BIND_POINT_GRAPHICS, pipe.handle());
    vkCmdBindDescriptorSets(m_commandBuffer->GetBufferHandle(),
                            VK_PIPELINE_BIND_POINT_GRAPHICS, pipeline_layout, 0,
                            1, &descriptorSet, 0, NULL);

    m_errorMonitor->VerifyFound();

    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, InvalidBufferViewObject) {
    // Create a single TEXEL_BUFFER descriptor and send it an invalid bufferView
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT, "Attempted write update to texel buffer "
                                       "descriptor with invalid buffer view");

    ASSERT_NO_FATAL_FAILURE(InitState());
    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;
    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkBufferView view =
        (VkBufferView)((size_t)0xbaadbeef); // invalid bufferView object
    VkWriteDescriptorSet descriptor_write;
    memset(&descriptor_write, 0, sizeof(descriptor_write));
    descriptor_write.sType = VK_STRUCTURE_TYPE_WRITE_DESCRIPTOR_SET;
    descriptor_write.dstSet = descriptorSet;
    descriptor_write.dstBinding = 0;
    descriptor_write.descriptorCount = 1;
    descriptor_write.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER;
    descriptor_write.pTexelBufferView = &view;

    vkUpdateDescriptorSets(m_device->device(), 1, &descriptor_write, 0, NULL);

    m_errorMonitor->VerifyFound();

    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, InvalidDynamicOffsetCases) {
    // Create a descriptorSet w/ dynamic descriptor and then hit 3 offset error
    // cases:
    // 1. No dynamicOffset supplied
    // 2. Too many dynamicOffsets supplied
    // 3. Dynamic offset oversteps buffer being updated
    VkResult err;
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         " requires 1 dynamicOffsets, but only "
                                         "0 dynamicOffsets are left in "
                                         "pDynamicOffsets ");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitViewport());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;
    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.pNext = NULL;
    pipeline_layout_ci.setLayoutCount = 1;
    pipeline_layout_ci.pSetLayouts = &ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    // Create a buffer to update the descriptor with
    uint32_t qfi = 0;
    VkBufferCreateInfo buffCI = {};
    buffCI.sType = VK_STRUCTURE_TYPE_BUFFER_CREATE_INFO;
    buffCI.size = 1024;
    buffCI.usage = VK_BUFFER_USAGE_UNIFORM_BUFFER_BIT;
    buffCI.queueFamilyIndexCount = 1;
    buffCI.pQueueFamilyIndices = &qfi;

    VkBuffer dyub;
    err = vkCreateBuffer(m_device->device(), &buffCI, NULL, &dyub);
    ASSERT_VK_SUCCESS(err);
    // Allocate memory and bind to buffer so we can make it to the appropriate
    // error
    VkMemoryAllocateInfo mem_alloc = {};
    mem_alloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    mem_alloc.pNext = NULL;
    mem_alloc.allocationSize = 1024;
    mem_alloc.memoryTypeIndex = 0;

    VkMemoryRequirements memReqs;
    vkGetBufferMemoryRequirements(m_device->device(), dyub, &memReqs);
    bool pass = m_device->phy().set_memory_type(memReqs.memoryTypeBits, &mem_alloc,
                                           0);
    if (!pass) {
        vkDestroyBuffer(m_device->device(), dyub, NULL);
        return;
    }

    VkDeviceMemory mem;
    err = vkAllocateMemory(m_device->device(), &mem_alloc, NULL, &mem);
    ASSERT_VK_SUCCESS(err);
    err = vkBindBufferMemory(m_device->device(), dyub, mem, 0);
    ASSERT_VK_SUCCESS(err);
    // Correctly update descriptor to avoid "NOT_UPDATED" error
    VkDescriptorBufferInfo buffInfo = {};
    buffInfo.buffer = dyub;
    buffInfo.offset = 0;
    buffInfo.range = 1024;

    VkWriteDescriptorSet descriptor_write;
    memset(&descriptor_write, 0, sizeof(descriptor_write));
    descriptor_write.sType = VK_STRUCTURE_TYPE_WRITE_DESCRIPTOR_SET;
    descriptor_write.dstSet = descriptorSet;
    descriptor_write.dstBinding = 0;
    descriptor_write.descriptorCount = 1;
    descriptor_write.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC;
    descriptor_write.pBufferInfo = &buffInfo;

    vkUpdateDescriptorSets(m_device->device(), 1, &descriptor_write, 0, NULL);

    BeginCommandBuffer();
    vkCmdBindDescriptorSets(m_commandBuffer->GetBufferHandle(),
                            VK_PIPELINE_BIND_POINT_GRAPHICS, pipeline_layout, 0,
                            1, &descriptorSet, 0, NULL);
    m_errorMonitor->VerifyFound();
    uint32_t pDynOff[2] = {512, 756};
    // Now cause error b/c too many dynOffsets in array for # of dyn descriptors
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Attempting to bind 1 descriptorSets with 1 dynamic descriptors, but ");
    vkCmdBindDescriptorSets(m_commandBuffer->GetBufferHandle(),
                            VK_PIPELINE_BIND_POINT_GRAPHICS, pipeline_layout, 0,
                            1, &descriptorSet, 2, pDynOff);
    m_errorMonitor->VerifyFound();
    // Finally cause error due to dynamicOffset being too big
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         " dynamic offset 512 combined with "
                                         "offset 0 and range 1024 that "
                                         "oversteps the buffer size of 1024");
    // Create PSO to be used for draw-time errors below
    char const *vsSource =
        "#version 450\n"
        "\n"
        "out gl_PerVertex { \n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(1);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 x;\n"
        "layout(set=0) layout(binding=0) uniform foo { int x; int y; } bar;\n"
        "void main(){\n"
        "   x = vec4(bar.y);\n"
        "}\n";
    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);
    VkPipelineObj pipe(m_device);
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);
    pipe.AddColorAttachment();
    pipe.CreateVKPipeline(pipeline_layout, renderPass());

    vkCmdBindPipeline(m_commandBuffer->GetBufferHandle(),
                      VK_PIPELINE_BIND_POINT_GRAPHICS, pipe.handle());
    // This update should succeed, but offset size of 512 will overstep buffer
    // /w range 1024 & size 1024
    vkCmdBindDescriptorSets(m_commandBuffer->GetBufferHandle(),
                            VK_PIPELINE_BIND_POINT_GRAPHICS, pipeline_layout, 0,
                            1, &descriptorSet, 1, pDynOff);
    Draw(1, 0, 0, 0);
    m_errorMonitor->VerifyFound();

    vkDestroyBuffer(m_device->device(), dyub, NULL);
    vkFreeMemory(m_device->device(), mem, NULL);

    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, InvalidPushConstants) {
    VkResult err;
    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitViewport());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkPipelineLayout pipeline_layout;
    VkPushConstantRange pc_range = {};
    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.pushConstantRangeCount = 1;
    pipeline_layout_ci.pPushConstantRanges = &pc_range;

    //
    // Check for invalid push constant ranges in pipeline layouts.
    //
    struct PipelineLayoutTestCase {
        VkPushConstantRange const range;
        char const *msg;
    };

    const uint32_t too_big = m_device->props.limits.maxPushConstantsSize + 0x4;
    const std::array<PipelineLayoutTestCase, 10> range_tests = {{
        {{VK_SHADER_STAGE_VERTEX_BIT, 0, 0},
         "vkCreatePipelineLayout() call has push constants index 0 with "
         "size 0."},
        {{VK_SHADER_STAGE_VERTEX_BIT, 0, 1},
         "vkCreatePipelineLayout() call has push constants index 0 with "
         "size 1."},
        {{VK_SHADER_STAGE_VERTEX_BIT, 1, 1},
         "vkCreatePipelineLayout() call has push constants index 0 with "
         "size 1."},
        {{VK_SHADER_STAGE_VERTEX_BIT, 1, 0},
         "vkCreatePipelineLayout() call has push constants index 0 with "
         "size 0."},
        {{VK_SHADER_STAGE_VERTEX_BIT, 1, 4},
         "vkCreatePipelineLayout() call has push constants index 0 with "
         "offset 1. Offset must"},
        {{VK_SHADER_STAGE_VERTEX_BIT, 0, too_big},
         "vkCreatePipelineLayout() call has push constants index 0 "
         "with offset "},
        {{VK_SHADER_STAGE_VERTEX_BIT, too_big, too_big},
         "vkCreatePipelineLayout() call has push constants "
         "index 0 with offset "},
        {{VK_SHADER_STAGE_VERTEX_BIT, too_big, 0},
         "vkCreatePipelineLayout() call has push constants index 0 "
         "with offset "},
        {{VK_SHADER_STAGE_VERTEX_BIT, 0xFFFFFFF0, 0x00000020},
         "vkCreatePipelineLayout() call has push "
         "constants index 0 with offset "},
        {{VK_SHADER_STAGE_VERTEX_BIT, 0x00000020, 0xFFFFFFF0},
         "vkCreatePipelineLayout() call has push "
         "constants index 0 with offset "},
    }};

    // Check for invalid offset and size
    for (const auto &iter : range_tests) {
        pc_range = iter.range;
        m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                             iter.msg);
        err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci,
                                     NULL, &pipeline_layout);
        m_errorMonitor->VerifyFound();
        if (VK_SUCCESS == err) {
            vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
        }
    }

    // Check for invalid stage flag
    pc_range.offset = 0;
    pc_range.size = 16;
    pc_range.stageFlags = 0;
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCreatePipelineLayout() call has no stageFlags set.");
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    m_errorMonitor->VerifyFound();
    if (VK_SUCCESS == err) {
        vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    }

    // Check for overlapping ranges
    const uint32_t ranges_per_test = 5;
    struct OverlappingRangeTestCase {
        VkPushConstantRange const ranges[ranges_per_test];
        char const *msg;
    };

    const std::array<OverlappingRangeTestCase, 5> overlapping_range_tests = {
        {{{{VK_SHADER_STAGE_VERTEX_BIT, 0, 4},
           {VK_SHADER_STAGE_VERTEX_BIT, 0, 4},
           {VK_SHADER_STAGE_VERTEX_BIT, 0, 4},
           {VK_SHADER_STAGE_VERTEX_BIT, 0, 4},
           {VK_SHADER_STAGE_VERTEX_BIT, 0, 4}},
          "vkCreatePipelineLayout() call has push constants with overlapping "
          "ranges: 0:[0, 4), 1:[0, 4)"},
         {
             {{VK_SHADER_STAGE_VERTEX_BIT, 0, 4},
              {VK_SHADER_STAGE_VERTEX_BIT, 4, 4},
              {VK_SHADER_STAGE_VERTEX_BIT, 8, 4},
              {VK_SHADER_STAGE_VERTEX_BIT, 12, 8},
              {VK_SHADER_STAGE_VERTEX_BIT, 16, 4}},
             "vkCreatePipelineLayout() call has push constants with "
             "overlapping "
             "ranges: 3:[12, 20), 4:[16, 20)",
         },
         {
             {{VK_SHADER_STAGE_VERTEX_BIT, 16, 4},
              {VK_SHADER_STAGE_VERTEX_BIT, 12, 8},
              {VK_SHADER_STAGE_VERTEX_BIT, 8, 4},
              {VK_SHADER_STAGE_VERTEX_BIT, 4, 4},
              {VK_SHADER_STAGE_VERTEX_BIT, 0, 4}},
             "vkCreatePipelineLayout() call has push constants with "
             "overlapping "
             "ranges: 0:[16, 20), 1:[12, 20)",
         },
         {
             {{VK_SHADER_STAGE_VERTEX_BIT, 16, 4},
              {VK_SHADER_STAGE_VERTEX_BIT, 8, 4},
              {VK_SHADER_STAGE_VERTEX_BIT, 4, 4},
              {VK_SHADER_STAGE_VERTEX_BIT, 12, 8},
              {VK_SHADER_STAGE_VERTEX_BIT, 0, 4}},
             "vkCreatePipelineLayout() call has push constants with "
             "overlapping "
             "ranges: 0:[16, 20), 3:[12, 20)",
         },
         {
             {{VK_SHADER_STAGE_VERTEX_BIT, 16, 4},
              {VK_SHADER_STAGE_VERTEX_BIT, 32, 4},
              {VK_SHADER_STAGE_VERTEX_BIT, 4, 96},
              {VK_SHADER_STAGE_VERTEX_BIT, 40, 8},
              {VK_SHADER_STAGE_VERTEX_BIT, 52, 4}},
             "vkCreatePipelineLayout() call has push constants with "
             "overlapping "
             "ranges: 0:[16, 20), 2:[4, 100)",
         }}};

    for (const auto &iter : overlapping_range_tests) {
        pipeline_layout_ci.pPushConstantRanges = iter.ranges;
        pipeline_layout_ci.pushConstantRangeCount = ranges_per_test;
        m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_WARNING_BIT_EXT,
                                             iter.msg);
        err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci,
                                     NULL, &pipeline_layout);
        m_errorMonitor->VerifyFound();
        if (VK_SUCCESS == err) {
            vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
        }
    }

    // Run some positive tests to make sure overlap checking in the layer is OK
    const std::array<OverlappingRangeTestCase, 2> overlapping_range_tests_pos =
        {{{{{VK_SHADER_STAGE_VERTEX_BIT, 0, 4},
            {VK_SHADER_STAGE_VERTEX_BIT, 4, 4},
            {VK_SHADER_STAGE_VERTEX_BIT, 8, 4},
            {VK_SHADER_STAGE_VERTEX_BIT, 12, 4},
            {VK_SHADER_STAGE_VERTEX_BIT, 16, 4}},
           ""},
          {{{VK_SHADER_STAGE_VERTEX_BIT, 92, 24},
            {VK_SHADER_STAGE_VERTEX_BIT, 80, 4},
            {VK_SHADER_STAGE_VERTEX_BIT, 64, 8},
            {VK_SHADER_STAGE_VERTEX_BIT, 4, 16},
            {VK_SHADER_STAGE_VERTEX_BIT, 0, 4}},
           ""}}};
    for (const auto &iter : overlapping_range_tests_pos) {
        pipeline_layout_ci.pPushConstantRanges = iter.ranges;
        m_errorMonitor->ExpectSuccess();
        err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci,
                                     NULL, &pipeline_layout);
        m_errorMonitor->VerifyNotFound();
        if (VK_SUCCESS == err) {
            vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
        }
    }

    //
    // CmdPushConstants tests
    //
    const uint8_t dummy_values[100] = {};

    // Check for invalid offset and size and if range is within layout range(s)
    const std::array<PipelineLayoutTestCase, 16> cmd_range_tests = {{
        {{VK_SHADER_STAGE_VERTEX_BIT, 0, 0},
         "vkCmdPushConstants() call has push constants with size 0. Size "
         "must be greater than zero and a multiple of 4."},
        {{VK_SHADER_STAGE_VERTEX_BIT, 0, 1},
         "vkCmdPushConstants() call has push constants with size 1. Size "
         "must be greater than zero and a multiple of 4."},
        {{VK_SHADER_STAGE_VERTEX_BIT, 1, 1},
         "vkCmdPushConstants() call has push constants with size 1. Size "
         "must be greater than zero and a multiple of 4."},
        {{VK_SHADER_STAGE_VERTEX_BIT, 1, 0},
         "vkCmdPushConstants() call has push constants with offset 1. "
         "Offset must be a multiple of 4."},
        {{VK_SHADER_STAGE_VERTEX_BIT, 1, 4},
         "vkCmdPushConstants() call has push constants with offset 1. "
         "Offset must be a multiple of 4."},
        {{VK_SHADER_STAGE_VERTEX_BIT, 0, 20},
         "vkCmdPushConstants() Push constant range [0, 20) with stageFlags = "
         "0x1 not within flag-matching ranges in pipeline layout"},
        {{VK_SHADER_STAGE_VERTEX_BIT, 60, 8},
         "vkCmdPushConstants() Push constant range [60, 68) with stageFlags = "
         "0x1 not within flag-matching ranges in pipeline layout"},
        {{VK_SHADER_STAGE_VERTEX_BIT, 76, 8},
         "vkCmdPushConstants() Push constant range [76, 84) with stageFlags = "
         "0x1 not within flag-matching ranges in pipeline layout"},
        {{VK_SHADER_STAGE_VERTEX_BIT, 0, 80},
         "vkCmdPushConstants() Push constant range [0, 80) with stageFlags = "
         "0x1 not within flag-matching ranges in pipeline layout"},
        {{VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT, 0, 4},
         "vkCmdPushConstants() stageFlags = 0x2 do not match the stageFlags in "
         "any of the ranges in pipeline layout"},
        {{VK_SHADER_STAGE_VERTEX_BIT | VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT,
          0, 16},
         "vkCmdPushConstants() stageFlags = 0x3 do not match the stageFlags in "
         "any of the ranges in pipeline layout"},
        {{VK_SHADER_STAGE_VERTEX_BIT, 0, too_big},
         "vkCmdPushConstants() call has push constants with offset "},
        {{VK_SHADER_STAGE_VERTEX_BIT, too_big, too_big},
         "vkCmdPushConstants() call has push constants with offset "},
        {{VK_SHADER_STAGE_VERTEX_BIT, too_big, 0},
         "vkCmdPushConstants() call has push constants with offset "},
        {{VK_SHADER_STAGE_VERTEX_BIT, 0xFFFFFFF0, 0x00000020},
         "vkCmdPushConstants() call has push constants with offset "},
        {{VK_SHADER_STAGE_VERTEX_BIT, 0x00000020, 0xFFFFFFF0},
         "vkCmdPushConstants() call has push constants with offset "},
    }};

    // Two ranges for testing robustness
    const VkPushConstantRange pc_range2[] = {
        {VK_SHADER_STAGE_VERTEX_BIT, 64, 16},
        {VK_SHADER_STAGE_VERTEX_BIT, 0, 16},
    };
    pipeline_layout_ci.pushConstantRangeCount =
        sizeof(pc_range2) / sizeof(VkPushConstantRange);
    pipeline_layout_ci.pPushConstantRanges = pc_range2;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);
    BeginCommandBuffer();
    for (const auto &iter : cmd_range_tests) {
        m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                             iter.msg);
        vkCmdPushConstants(m_commandBuffer->GetBufferHandle(), pipeline_layout,
                           iter.range.stageFlags, iter.range.offset,
                           iter.range.size, dummy_values);
        m_errorMonitor->VerifyFound();
    }

    // Check for invalid stage flag
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCmdPushConstants() call has no stageFlags set.");
    vkCmdPushConstants(m_commandBuffer->GetBufferHandle(), pipeline_layout, 0,
                       0, 16, dummy_values);
    m_errorMonitor->VerifyFound();
    EndCommandBuffer();
    vkResetCommandBuffer(m_commandBuffer->GetBufferHandle(), 0);
    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);

    // overlapping range tests with cmd
    const std::array<PipelineLayoutTestCase, 3> cmd_overlap_tests = {{
        {{VK_SHADER_STAGE_VERTEX_BIT, 0, 20},
         "vkCmdPushConstants() Push constant range [0, 20) with stageFlags = "
         "0x1 not within flag-matching ranges in pipeline layout"},
        {{VK_SHADER_STAGE_VERTEX_BIT, 16, 4},
         "vkCmdPushConstants() Push constant range [16, 20) with stageFlags = "
         "0x1 not within flag-matching ranges in pipeline layout"},
        {{VK_SHADER_STAGE_VERTEX_BIT, 40, 16},
         "vkCmdPushConstants() Push constant range [40, 56) with stageFlags = "
         "0x1 not within flag-matching ranges in pipeline layout"},
    }};
    const VkPushConstantRange pc_range3[] = {
        {VK_SHADER_STAGE_VERTEX_BIT, 20, 16},
        {VK_SHADER_STAGE_VERTEX_BIT, 0, 16},
        {VK_SHADER_STAGE_VERTEX_BIT, 0, 4},
        {VK_SHADER_STAGE_VERTEX_BIT, 44, 8},
        {VK_SHADER_STAGE_VERTEX_BIT, 80, 12},
        {VK_SHADER_STAGE_VERTEX_BIT, 36, 8},
        {VK_SHADER_STAGE_VERTEX_BIT, 56, 28},
    };
    pipeline_layout_ci.pushConstantRangeCount =
        sizeof(pc_range3) / sizeof(VkPushConstantRange);
    pipeline_layout_ci.pPushConstantRanges = pc_range3;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);
    BeginCommandBuffer();
    for (const auto &iter : cmd_overlap_tests) {
        m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                             iter.msg);
        vkCmdPushConstants(m_commandBuffer->GetBufferHandle(), pipeline_layout,
                           iter.range.stageFlags, iter.range.offset,
                           iter.range.size, dummy_values);
        m_errorMonitor->VerifyFound();
    }
    EndCommandBuffer();
    vkResetCommandBuffer(m_commandBuffer->GetBufferHandle(), 0);
    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);

    // positive overlapping range tests with cmd
    const std::array<PipelineLayoutTestCase, 4> cmd_overlap_tests_pos = {{
        {{VK_SHADER_STAGE_VERTEX_BIT, 0, 16}, ""},
        {{VK_SHADER_STAGE_VERTEX_BIT, 0, 4}, ""},
        {{VK_SHADER_STAGE_VERTEX_BIT, 20, 12}, ""},
        {{VK_SHADER_STAGE_VERTEX_BIT, 56, 36}, ""},
    }};
    const VkPushConstantRange pc_range4[] = {
        {VK_SHADER_STAGE_VERTEX_BIT, 0, 64},
        {VK_SHADER_STAGE_VERTEX_BIT, 20, 16},
        {VK_SHADER_STAGE_VERTEX_BIT, 0, 16},
        {VK_SHADER_STAGE_VERTEX_BIT, 0, 4},
        {VK_SHADER_STAGE_VERTEX_BIT, 44, 8},
        {VK_SHADER_STAGE_VERTEX_BIT, 80, 12},
        {VK_SHADER_STAGE_VERTEX_BIT, 36, 8},
        {VK_SHADER_STAGE_VERTEX_BIT, 56, 28},
    };
    pipeline_layout_ci.pushConstantRangeCount =
        sizeof(pc_range4) / sizeof(VkPushConstantRange);
    pipeline_layout_ci.pPushConstantRanges = pc_range4;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);
    BeginCommandBuffer();
    for (const auto &iter : cmd_overlap_tests_pos) {
        m_errorMonitor->ExpectSuccess();
        vkCmdPushConstants(m_commandBuffer->GetBufferHandle(), pipeline_layout,
                           iter.range.stageFlags, iter.range.offset,
                           iter.range.size, dummy_values);
        m_errorMonitor->VerifyNotFound();
    }
    EndCommandBuffer();
    vkResetCommandBuffer(m_commandBuffer->GetBufferHandle(), 0);
    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
}

TEST_F(VkLayerTest, DescriptorSetCompatibility) {
    // Test various desriptorSet errors with bad binding combinations
    VkResult err;

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitViewport());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    static const uint32_t NUM_DESCRIPTOR_TYPES = 5;
    VkDescriptorPoolSize ds_type_count[NUM_DESCRIPTOR_TYPES] = {};
    ds_type_count[0].type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count[0].descriptorCount = 10;
    ds_type_count[1].type = VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE;
    ds_type_count[1].descriptorCount = 2;
    ds_type_count[2].type = VK_DESCRIPTOR_TYPE_STORAGE_IMAGE;
    ds_type_count[2].descriptorCount = 2;
    ds_type_count[3].type = VK_DESCRIPTOR_TYPE_SAMPLER;
    ds_type_count[3].descriptorCount = 5;
    // TODO : LunarG ILO driver currently asserts in desc.c w/ INPUT_ATTACHMENT
    // type
    // ds_type_count[4].type = VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT;
    ds_type_count[4].type = VK_DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER;
    ds_type_count[4].descriptorCount = 2;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 5;
    ds_pool_ci.poolSizeCount = NUM_DESCRIPTOR_TYPES;
    ds_pool_ci.pPoolSizes = ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    static const uint32_t MAX_DS_TYPES_IN_LAYOUT = 2;
    VkDescriptorSetLayoutBinding dsl_binding[MAX_DS_TYPES_IN_LAYOUT] = {};
    dsl_binding[0].binding = 0;
    dsl_binding[0].descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding[0].descriptorCount = 5;
    dsl_binding[0].stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding[0].pImmutableSamplers = NULL;

    // Create layout identical to set0 layout but w/ different stageFlags
    VkDescriptorSetLayoutBinding dsl_fs_stage_only = {};
    dsl_fs_stage_only.binding = 0;
    dsl_fs_stage_only.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_fs_stage_only.descriptorCount = 5;
    dsl_fs_stage_only.stageFlags =
        VK_SHADER_STAGE_FRAGMENT_BIT; // Different stageFlags to cause error at
                                      // bind time
    dsl_fs_stage_only.pImmutableSamplers = NULL;
    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = dsl_binding;
    static const uint32_t NUM_LAYOUTS = 4;
    VkDescriptorSetLayout ds_layout[NUM_LAYOUTS] = {};
    VkDescriptorSetLayout ds_layout_fs_only = {};
    // Create 4 unique layouts for full pipelineLayout, and 1 special fs-only
    // layout for error case
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout[0]);
    ASSERT_VK_SUCCESS(err);
    ds_layout_ci.pBindings = &dsl_fs_stage_only;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout_fs_only);
    ASSERT_VK_SUCCESS(err);
    dsl_binding[0].binding = 0;
    dsl_binding[0].descriptorType = VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE;
    dsl_binding[0].descriptorCount = 2;
    dsl_binding[1].binding = 1;
    dsl_binding[1].descriptorType = VK_DESCRIPTOR_TYPE_STORAGE_IMAGE;
    dsl_binding[1].descriptorCount = 2;
    dsl_binding[1].stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding[1].pImmutableSamplers = NULL;
    ds_layout_ci.pBindings = dsl_binding;
    ds_layout_ci.bindingCount = 2;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout[1]);
    ASSERT_VK_SUCCESS(err);
    dsl_binding[0].binding = 0;
    dsl_binding[0].descriptorType = VK_DESCRIPTOR_TYPE_SAMPLER;
    dsl_binding[0].descriptorCount = 5;
    ds_layout_ci.bindingCount = 1;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout[2]);
    ASSERT_VK_SUCCESS(err);
    dsl_binding[0].descriptorType = VK_DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER;
    dsl_binding[0].descriptorCount = 2;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout[3]);
    ASSERT_VK_SUCCESS(err);

    static const uint32_t NUM_SETS = 4;
    VkDescriptorSet descriptorSet[NUM_SETS] = {};
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = NUM_LAYOUTS;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   descriptorSet);
    ASSERT_VK_SUCCESS(err);
    VkDescriptorSet ds0_fs_only = {};
    alloc_info.descriptorSetCount = 1;
    alloc_info.pSetLayouts = &ds_layout_fs_only;
    err =
        vkAllocateDescriptorSets(m_device->device(), &alloc_info, &ds0_fs_only);
    ASSERT_VK_SUCCESS(err);

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.pNext = NULL;
    pipeline_layout_ci.setLayoutCount = NUM_LAYOUTS;
    pipeline_layout_ci.pSetLayouts = ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);
    // Create pipelineLayout with only one setLayout
    pipeline_layout_ci.setLayoutCount = 1;
    VkPipelineLayout single_pipe_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &single_pipe_layout);
    ASSERT_VK_SUCCESS(err);
    // Create pipelineLayout with 2 descriptor setLayout at index 0
    pipeline_layout_ci.pSetLayouts = &ds_layout[3];
    VkPipelineLayout pipe_layout_one_desc;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipe_layout_one_desc);
    ASSERT_VK_SUCCESS(err);
    // Create pipelineLayout with 5 SAMPLER descriptor setLayout at index 0
    pipeline_layout_ci.pSetLayouts = &ds_layout[2];
    VkPipelineLayout pipe_layout_five_samp;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipe_layout_five_samp);
    ASSERT_VK_SUCCESS(err);
    // Create pipelineLayout with UB type, but stageFlags for FS only
    pipeline_layout_ci.pSetLayouts = &ds_layout_fs_only;
    VkPipelineLayout pipe_layout_fs_only;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipe_layout_fs_only);
    ASSERT_VK_SUCCESS(err);
    // Create pipelineLayout w/ incompatible set0 layout, but set1 is fine
    VkDescriptorSetLayout pl_bad_s0[2] = {};
    pl_bad_s0[0] = ds_layout_fs_only;
    pl_bad_s0[1] = ds_layout[1];
    pipeline_layout_ci.setLayoutCount = 2;
    pipeline_layout_ci.pSetLayouts = pl_bad_s0;
    VkPipelineLayout pipe_layout_bad_set0;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipe_layout_bad_set0);
    ASSERT_VK_SUCCESS(err);

    // Create a buffer to update the descriptor with
    uint32_t qfi = 0;
    VkBufferCreateInfo buffCI = {};
    buffCI.sType = VK_STRUCTURE_TYPE_BUFFER_CREATE_INFO;
    buffCI.size = 1024;
    buffCI.usage = VK_BUFFER_USAGE_UNIFORM_BUFFER_BIT;
    buffCI.queueFamilyIndexCount = 1;
    buffCI.pQueueFamilyIndices = &qfi;

    VkBuffer dyub;
    err = vkCreateBuffer(m_device->device(), &buffCI, NULL, &dyub);
    ASSERT_VK_SUCCESS(err);
    // Correctly update descriptor to avoid "NOT_UPDATED" error
    static const uint32_t NUM_BUFFS = 5;
    VkDescriptorBufferInfo buffInfo[NUM_BUFFS] = {};
    for (uint32_t i = 0; i < NUM_BUFFS; ++i) {
        buffInfo[i].buffer = dyub;
        buffInfo[i].offset = 0;
        buffInfo[i].range = 1024;
    }
    VkImage image;
    const VkFormat tex_format = VK_FORMAT_B8G8R8A8_UNORM;
    const int32_t tex_width = 32;
    const int32_t tex_height = 32;
    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = tex_format;
    image_create_info.extent.width = tex_width;
    image_create_info.extent.height = tex_height;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_LINEAR;
    image_create_info.usage = VK_IMAGE_USAGE_SAMPLED_BIT;
    image_create_info.flags = 0;
    err = vkCreateImage(m_device->device(), &image_create_info, NULL, &image);
    ASSERT_VK_SUCCESS(err);

    VkMemoryRequirements memReqs;
    VkDeviceMemory imageMem;
    bool pass;
    VkMemoryAllocateInfo memAlloc = {};
    memAlloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    memAlloc.pNext = NULL;
    memAlloc.allocationSize = 0;
    memAlloc.memoryTypeIndex = 0;
    vkGetImageMemoryRequirements(m_device->device(), image, &memReqs);
    memAlloc.allocationSize = memReqs.size;
    pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &memAlloc, 0);
    ASSERT_TRUE(pass);
    err = vkAllocateMemory(m_device->device(), &memAlloc, NULL, &imageMem);
    ASSERT_VK_SUCCESS(err);
    err = vkBindImageMemory(m_device->device(), image, imageMem, 0);
    ASSERT_VK_SUCCESS(err);

    VkImageViewCreateInfo image_view_create_info = {};
    image_view_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_VIEW_CREATE_INFO;
    image_view_create_info.image = image;
    image_view_create_info.viewType = VK_IMAGE_VIEW_TYPE_2D;
    image_view_create_info.format = tex_format;
    image_view_create_info.subresourceRange.layerCount = 1;
    image_view_create_info.subresourceRange.baseMipLevel = 0;
    image_view_create_info.subresourceRange.levelCount = 1;
    image_view_create_info.subresourceRange.aspectMask =
        VK_IMAGE_ASPECT_COLOR_BIT;

    VkImageView view;
    err = vkCreateImageView(m_device->device(), &image_view_create_info, NULL,
                            &view);
    ASSERT_VK_SUCCESS(err);
    VkDescriptorImageInfo imageInfo[4] = {};
    imageInfo[0].imageView = view;
    imageInfo[0].imageLayout = VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL;
    imageInfo[1].imageView = view;
    imageInfo[1].imageLayout = VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL;
    imageInfo[2].imageView = view;
    imageInfo[2].imageLayout = VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL;
    imageInfo[3].imageView = view;
    imageInfo[3].imageLayout = VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL;

    static const uint32_t NUM_SET_UPDATES = 3;
    VkWriteDescriptorSet descriptor_write[NUM_SET_UPDATES] = {};
    descriptor_write[0].sType = VK_STRUCTURE_TYPE_WRITE_DESCRIPTOR_SET;
    descriptor_write[0].dstSet = descriptorSet[0];
    descriptor_write[0].dstBinding = 0;
    descriptor_write[0].descriptorCount = 5;
    descriptor_write[0].descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    descriptor_write[0].pBufferInfo = buffInfo;
    descriptor_write[1].sType = VK_STRUCTURE_TYPE_WRITE_DESCRIPTOR_SET;
    descriptor_write[1].dstSet = descriptorSet[1];
    descriptor_write[1].dstBinding = 0;
    descriptor_write[1].descriptorCount = 2;
    descriptor_write[1].descriptorType = VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE;
    descriptor_write[1].pImageInfo = imageInfo;
    descriptor_write[2].sType = VK_STRUCTURE_TYPE_WRITE_DESCRIPTOR_SET;
    descriptor_write[2].dstSet = descriptorSet[1];
    descriptor_write[2].dstBinding = 1;
    descriptor_write[2].descriptorCount = 2;
    descriptor_write[2].descriptorType = VK_DESCRIPTOR_TYPE_STORAGE_IMAGE;
    descriptor_write[2].pImageInfo = &imageInfo[2];

    vkUpdateDescriptorSets(m_device->device(), 3, descriptor_write, 0, NULL);

    // Create PSO to be used for draw-time errors below
    char const *vsSource =
        "#version 450\n"
        "\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(1);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 x;\n"
        "layout(set=0) layout(binding=0) uniform foo { int x; int y; } bar;\n"
        "void main(){\n"
        "   x = vec4(bar.y);\n"
        "}\n";
    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);
    VkPipelineObj pipe(m_device);
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);
    pipe.AddColorAttachment();
    pipe.CreateVKPipeline(pipe_layout_fs_only, renderPass());

    BeginCommandBuffer();

    vkCmdBindPipeline(m_commandBuffer->GetBufferHandle(),
                      VK_PIPELINE_BIND_POINT_GRAPHICS, pipe.handle());
    // NOTE : I believe LunarG ilo driver has bug (LX#189) that requires binding
    // of PSO
    //  here before binding DSs. Otherwise we assert in cmd_copy_dset_data() of
    //  cmd_pipeline.c
    //  due to the fact that cmd_alloc_dset_data() has not been called in
    //  cmd_bind_graphics_pipeline()
    // TODO : Want to cause various binding incompatibility issues here to test
    // DrawState
    //  First cause various verify_layout_compatibility() fails
    //  Second disturb early and late sets and verify INFO msgs
    // verify_set_layout_compatibility fail cases:
    // 1. invalid VkPipelineLayout (layout) passed into vkCmdBindDescriptorSets
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         " due to: invalid VkPipelineLayout ");
    vkCmdBindDescriptorSets(m_commandBuffer->GetBufferHandle(),
                            VK_PIPELINE_BIND_POINT_GRAPHICS,
                            (VkPipelineLayout)((size_t)0xbaadb1be), 0, 1,
                            &descriptorSet[0], 0, NULL);
    m_errorMonitor->VerifyFound();

    // 2. layoutIndex exceeds # of layouts in layout
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         " attempting to bind set to index 1");
    vkCmdBindDescriptorSets(m_commandBuffer->GetBufferHandle(),
                            VK_PIPELINE_BIND_POINT_GRAPHICS, single_pipe_layout,
                            0, 2, &descriptorSet[0], 0, NULL);
    m_errorMonitor->VerifyFound();

    vkDestroyPipelineLayout(m_device->device(), single_pipe_layout, NULL);
    // 3. Pipeline setLayout[0] has 2 descriptors, but set being bound has 5
    // descriptors
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " has 2 descriptors, but DescriptorSetLayout ");
    vkCmdBindDescriptorSets(
        m_commandBuffer->GetBufferHandle(), VK_PIPELINE_BIND_POINT_GRAPHICS,
        pipe_layout_one_desc, 0, 1, &descriptorSet[0], 0, NULL);
    m_errorMonitor->VerifyFound();

    vkDestroyPipelineLayout(m_device->device(), pipe_layout_one_desc, NULL);
    // 4. same # of descriptors but mismatch in type
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " is type 'VK_DESCRIPTOR_TYPE_SAMPLER' but binding ");
    vkCmdBindDescriptorSets(
        m_commandBuffer->GetBufferHandle(), VK_PIPELINE_BIND_POINT_GRAPHICS,
        pipe_layout_five_samp, 0, 1, &descriptorSet[0], 0, NULL);
    m_errorMonitor->VerifyFound();

    vkDestroyPipelineLayout(m_device->device(), pipe_layout_five_samp, NULL);
    // 5. same # of descriptors but mismatch in stageFlags
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " has stageFlags 16 but binding 0 for DescriptorSetLayout ");
    vkCmdBindDescriptorSets(
        m_commandBuffer->GetBufferHandle(), VK_PIPELINE_BIND_POINT_GRAPHICS,
        pipe_layout_fs_only, 0, 1, &descriptorSet[0], 0, NULL);
    m_errorMonitor->VerifyFound();

    // Cause INFO messages due to disturbing previously bound Sets
    // First bind sets 0 & 1
    vkCmdBindDescriptorSets(m_commandBuffer->GetBufferHandle(),
                            VK_PIPELINE_BIND_POINT_GRAPHICS, pipeline_layout, 0,
                            2, &descriptorSet[0], 0, NULL);
    // 1. Disturb bound set0 by re-binding set1 w/ updated pipelineLayout
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_PERFORMANCE_WARNING_BIT_EXT,
        " previously bound as set #0 was disturbed ");
    vkCmdBindDescriptorSets(
        m_commandBuffer->GetBufferHandle(), VK_PIPELINE_BIND_POINT_GRAPHICS,
        pipe_layout_bad_set0, 1, 1, &descriptorSet[1], 0, NULL);
    m_errorMonitor->VerifyFound();

    vkCmdBindDescriptorSets(m_commandBuffer->GetBufferHandle(),
                            VK_PIPELINE_BIND_POINT_GRAPHICS, pipeline_layout, 0,
                            2, &descriptorSet[0], 0, NULL);
    // 2. Disturb set after last bound set
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_PERFORMANCE_WARNING_BIT_EXT,
                                         " newly bound as set #0 so set #1 and "
                                         "any subsequent sets were disturbed ");
    vkCmdBindDescriptorSets(m_commandBuffer->GetBufferHandle(),
                            VK_PIPELINE_BIND_POINT_GRAPHICS,
                            pipe_layout_fs_only, 0, 1, &ds0_fs_only, 0, NULL);
    m_errorMonitor->VerifyFound();

    // Cause draw-time errors due to PSO incompatibilities
    // 1. Error due to not binding required set (we actually use same code as
    // above to disturb set0)
    vkCmdBindDescriptorSets(m_commandBuffer->GetBufferHandle(),
                            VK_PIPELINE_BIND_POINT_GRAPHICS, pipeline_layout, 0,
                            2, &descriptorSet[0], 0, NULL);
    vkCmdBindDescriptorSets(
        m_commandBuffer->GetBufferHandle(), VK_PIPELINE_BIND_POINT_GRAPHICS,
        pipe_layout_bad_set0, 1, 1, &descriptorSet[1], 0, NULL);
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " uses set #0 but that set is not bound.");
    Draw(1, 0, 0, 0);
    m_errorMonitor->VerifyFound();

    vkDestroyPipelineLayout(m_device->device(), pipe_layout_bad_set0, NULL);
    // 2. Error due to bound set not being compatible with PSO's
    // VkPipelineLayout (diff stageFlags in this case)
    vkCmdBindDescriptorSets(m_commandBuffer->GetBufferHandle(),
                            VK_PIPELINE_BIND_POINT_GRAPHICS, pipeline_layout, 0,
                            2, &descriptorSet[0], 0, NULL);
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " bound as set #0 is not compatible with ");
    Draw(1, 0, 0, 0);
    m_errorMonitor->VerifyFound();

    // Remaining clean-up
    vkDestroyPipelineLayout(m_device->device(), pipe_layout_fs_only, NULL);
    for (uint32_t i = 0; i < NUM_LAYOUTS; ++i) {
        vkDestroyDescriptorSetLayout(m_device->device(), ds_layout[i], NULL);
    }
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout_fs_only, NULL);
    vkFreeDescriptorSets(m_device->device(), ds_pool, 1, &ds0_fs_only);
    vkFreeDescriptorSets(m_device->device(), ds_pool, NUM_SETS, descriptorSet);
    vkDestroyBuffer(m_device->device(), dyub, NULL);
    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
    vkFreeMemory(m_device->device(), imageMem, NULL);
    vkDestroyImage(m_device->device(), image, NULL);
    vkDestroyImageView(m_device->device(), view, NULL);
}

TEST_F(VkLayerTest, NoBeginCommandBuffer) {

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "You must call vkBeginCommandBuffer() before this call to ");

    ASSERT_NO_FATAL_FAILURE(InitState());
    VkCommandBufferObj commandBuffer(m_device, m_commandPool);
    // Call EndCommandBuffer() w/o calling BeginCommandBuffer()
    vkEndCommandBuffer(commandBuffer.GetBufferHandle());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, SecondaryCommandBufferNullRenderpass) {
    VkResult err;
    VkCommandBuffer draw_cmd;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " must specify a valid renderpass parameter.");

    ASSERT_NO_FATAL_FAILURE(InitState());

    VkCommandBufferAllocateInfo cmd = {};
    cmd.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_ALLOCATE_INFO;
    cmd.pNext = NULL;
    cmd.commandPool = m_commandPool;
    cmd.level = VK_COMMAND_BUFFER_LEVEL_SECONDARY;
    cmd.commandBufferCount = 1;

    err = vkAllocateCommandBuffers(m_device->device(), &cmd, &draw_cmd);
    ASSERT_VK_SUCCESS(err);

    // Force the failure by not setting the Renderpass and Framebuffer fields
    VkCommandBufferBeginInfo cmd_buf_info = {};
    VkCommandBufferInheritanceInfo cmd_buf_hinfo = {};
    cmd_buf_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
    cmd_buf_info.pNext = NULL;
    cmd_buf_info.flags = VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT |
                         VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT;
    cmd_buf_info.pInheritanceInfo = &cmd_buf_hinfo;

    // The error should be caught by validation of the BeginCommandBuffer call
    vkBeginCommandBuffer(draw_cmd, &cmd_buf_info);

    m_errorMonitor->VerifyFound();
    vkFreeCommandBuffers(m_device->device(), m_commandPool, 1, &draw_cmd);
}

TEST_F(VkLayerTest, CommandBufferResetErrors) {
    // Cause error due to Begin while recording CB
    // Then cause 2 errors for attempting to reset CB w/o having
    // VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT set for the pool from
    // which CBs were allocated. Note that this bit is off by default.
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Cannot call Begin on CB");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Calls AllocateCommandBuffers
    VkCommandBufferObj commandBuffer(m_device, m_commandPool);

    // Force the failure by setting the Renderpass and Framebuffer fields with
    // (fake) data
    VkCommandBufferBeginInfo cmd_buf_info = {};
    VkCommandBufferInheritanceInfo cmd_buf_hinfo = {};
    cmd_buf_info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
    cmd_buf_info.pNext = NULL;
    cmd_buf_info.flags = VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT;
    cmd_buf_info.pInheritanceInfo = &cmd_buf_hinfo;

    // Begin CB to transition to recording state
    vkBeginCommandBuffer(commandBuffer.GetBufferHandle(), &cmd_buf_info);
    // Can't re-begin. This should trigger error
    vkBeginCommandBuffer(commandBuffer.GetBufferHandle(), &cmd_buf_info);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Attempt to reset command buffer ");
    VkCommandBufferResetFlags flags = 0; // Don't care about flags for this test
    // Reset attempt will trigger error due to incorrect CommandPool state
    vkResetCommandBuffer(commandBuffer.GetBufferHandle(), flags);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " attempts to implicitly reset cmdBuffer created from ");
    // Transition CB to RECORDED state
    vkEndCommandBuffer(commandBuffer.GetBufferHandle());
    // Now attempting to Begin will implicitly reset, which triggers error
    vkBeginCommandBuffer(commandBuffer.GetBufferHandle(), &cmd_buf_info);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, InvalidPipelineCreateState) {
    // Attempt to Create Gfx Pipeline w/o a VS
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Invalid Pipeline CreateInfo State: Vtx Shader required");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.setLayoutCount = 1;
    pipeline_layout_ci.pSetLayouts = &ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    VkViewport vp = {}; // Just need dummy vp to point to
    VkRect2D sc = {};   // dummy scissor to point to

    VkPipelineViewportStateCreateInfo vp_state_ci = {};
    vp_state_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_VIEWPORT_STATE_CREATE_INFO;
    vp_state_ci.scissorCount = 1;
    vp_state_ci.pScissors = &sc;
    vp_state_ci.viewportCount = 1;
    vp_state_ci.pViewports = &vp;

    VkPipelineRasterizationStateCreateInfo rs_state_ci = {};
    rs_state_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_RASTERIZATION_STATE_CREATE_INFO;
    rs_state_ci.polygonMode = VK_POLYGON_MODE_FILL;
    rs_state_ci.cullMode = VK_CULL_MODE_BACK_BIT;
    rs_state_ci.frontFace = VK_FRONT_FACE_COUNTER_CLOCKWISE;
    rs_state_ci.depthClampEnable = VK_FALSE;
    rs_state_ci.rasterizerDiscardEnable = VK_FALSE;
    rs_state_ci.depthBiasEnable = VK_FALSE;

    VkGraphicsPipelineCreateInfo gp_ci = {};
    gp_ci.sType = VK_STRUCTURE_TYPE_GRAPHICS_PIPELINE_CREATE_INFO;
    gp_ci.pViewportState = &vp_state_ci;
    gp_ci.pRasterizationState = &rs_state_ci;
    gp_ci.flags = VK_PIPELINE_CREATE_DISABLE_OPTIMIZATION_BIT;
    gp_ci.layout = pipeline_layout;
    gp_ci.renderPass = renderPass();

    VkPipelineCacheCreateInfo pc_ci = {};
    pc_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_CACHE_CREATE_INFO;
    pc_ci.initialDataSize = 0;
    pc_ci.pInitialData = 0;

    VkPipeline pipeline;
    VkPipelineCache pipelineCache;

    err =
        vkCreatePipelineCache(m_device->device(), &pc_ci, NULL, &pipelineCache);
    ASSERT_VK_SUCCESS(err);
    err = vkCreateGraphicsPipelines(m_device->device(), pipelineCache, 1,
                                    &gp_ci, NULL, &pipeline);

    m_errorMonitor->VerifyFound();

    vkDestroyPipelineCache(m_device->device(), pipelineCache, NULL);
    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}
/*// TODO : This test should be good, but needs Tess support in compiler to run
TEST_F(VkLayerTest, InvalidPatchControlPoints)
{
    // Attempt to Create Gfx Pipeline w/o a VS
    VkResult        err;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Invalid Pipeline CreateInfo State: VK_PRIMITIVE_TOPOLOGY_PATCH
primitive ");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorPoolSize ds_type_count = {};
        ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
        ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
        ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
        ds_pool_ci.pNext = NULL;
        ds_pool_ci.poolSizeCount = 1;
        ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err = vkCreateDescriptorPool(m_device->device(),
VK_DESCRIPTOR_POOL_USAGE_NON_FREE, 1, &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
        dsl_binding.binding = 0;
        dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
        dsl_binding.descriptorCount = 1;
        dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
        dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
        ds_layout_ci.sType =
VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
        ds_layout_ci.pNext = NULL;
        ds_layout_ci.bindingCount = 1;
        ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
&ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    err = vkAllocateDescriptorSets(m_device->device(), ds_pool,
VK_DESCRIPTOR_SET_USAGE_NON_FREE, 1, &ds_layout, &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
        pipeline_layout_ci.sType =
VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
        pipeline_layout_ci.pNext = NULL;
        pipeline_layout_ci.setLayoutCount = 1;
        pipeline_layout_ci.pSetLayouts = &ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
&pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    VkPipelineShaderStageCreateInfo shaderStages[3];
    memset(&shaderStages, 0, 3 * sizeof(VkPipelineShaderStageCreateInfo));

    VkShaderObj vs(m_device,bindStateVertShaderText,VK_SHADER_STAGE_VERTEX_BIT,
this);
    // Just using VS txt for Tess shaders as we don't care about functionality
    VkShaderObj
tc(m_device,bindStateVertShaderText,VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT,
this);
    VkShaderObj
te(m_device,bindStateVertShaderText,VK_SHADER_STAGE_TESSELLATION_EVALUATION_BIT,
this);

    shaderStages[0].sType  =
VK_STRUCTURE_TYPE_PIPELINE_SHADER_STAGE_CREATE_INFO;
    shaderStages[0].stage  = VK_SHADER_STAGE_VERTEX_BIT;
    shaderStages[0].shader = vs.handle();
    shaderStages[1].sType  =
VK_STRUCTURE_TYPE_PIPELINE_SHADER_STAGE_CREATE_INFO;
    shaderStages[1].stage  = VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT;
    shaderStages[1].shader = tc.handle();
    shaderStages[2].sType  =
VK_STRUCTURE_TYPE_PIPELINE_SHADER_STAGE_CREATE_INFO;
    shaderStages[2].stage  = VK_SHADER_STAGE_TESSELLATION_EVALUATION_BIT;
    shaderStages[2].shader = te.handle();

    VkPipelineInputAssemblyStateCreateInfo iaCI = {};
        iaCI.sType =
VK_STRUCTURE_TYPE_PIPELINE_INPUT_ASSEMBLY_STATE_CREATE_INFO;
        iaCI.topology = VK_PRIMITIVE_TOPOLOGY_PATCH_LIST;

    VkPipelineTessellationStateCreateInfo tsCI = {};
        tsCI.sType = VK_STRUCTURE_TYPE_PIPELINE_TESSELLATION_STATE_CREATE_INFO;
        tsCI.patchControlPoints = 0; // This will cause an error

    VkGraphicsPipelineCreateInfo gp_ci = {};
        gp_ci.sType = VK_STRUCTURE_TYPE_GRAPHICS_PIPELINE_CREATE_INFO;
        gp_ci.pNext = NULL;
        gp_ci.stageCount = 3;
        gp_ci.pStages = shaderStages;
        gp_ci.pVertexInputState = NULL;
        gp_ci.pInputAssemblyState = &iaCI;
        gp_ci.pTessellationState = &tsCI;
        gp_ci.pViewportState = NULL;
        gp_ci.pRasterizationState = NULL;
        gp_ci.pMultisampleState = NULL;
        gp_ci.pDepthStencilState = NULL;
        gp_ci.pColorBlendState = NULL;
        gp_ci.flags = VK_PIPELINE_CREATE_DISABLE_OPTIMIZATION_BIT;
        gp_ci.layout = pipeline_layout;
        gp_ci.renderPass = renderPass();

    VkPipelineCacheCreateInfo pc_ci = {};
        pc_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_CACHE_CREATE_INFO;
        pc_ci.pNext = NULL;
        pc_ci.initialSize = 0;
        pc_ci.initialData = 0;
        pc_ci.maxSize = 0;

    VkPipeline pipeline;
    VkPipelineCache pipelineCache;

    err = vkCreatePipelineCache(m_device->device(), &pc_ci, NULL,
&pipelineCache);
    ASSERT_VK_SUCCESS(err);
    err = vkCreateGraphicsPipelines(m_device->device(), pipelineCache, 1,
&gp_ci, NULL, &pipeline);

    m_errorMonitor->VerifyFound();

    vkDestroyPipelineCache(m_device->device(), pipelineCache, NULL);
    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}
*/
// Set scissor and viewport counts to different numbers
TEST_F(VkLayerTest, PSOViewportScissorCountMismatch) {
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Gfx Pipeline viewport count (1) must match scissor count (0).");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.setLayoutCount = 1;
    pipeline_layout_ci.pSetLayouts = &ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    VkViewport vp = {}; // Just need dummy vp to point to

    VkPipelineViewportStateCreateInfo vp_state_ci = {};
    vp_state_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_VIEWPORT_STATE_CREATE_INFO;
    vp_state_ci.scissorCount = 0;
    vp_state_ci.viewportCount = 1; // Count mismatch should cause error
    vp_state_ci.pViewports = &vp;

    VkPipelineRasterizationStateCreateInfo rs_state_ci = {};
    rs_state_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_RASTERIZATION_STATE_CREATE_INFO;
    rs_state_ci.polygonMode = VK_POLYGON_MODE_FILL;
    rs_state_ci.cullMode = VK_CULL_MODE_BACK_BIT;
    rs_state_ci.frontFace = VK_FRONT_FACE_COUNTER_CLOCKWISE;
    rs_state_ci.depthClampEnable = VK_FALSE;
    rs_state_ci.rasterizerDiscardEnable = VK_FALSE;
    rs_state_ci.depthBiasEnable = VK_FALSE;

    VkPipelineShaderStageCreateInfo shaderStages[2];
    memset(&shaderStages, 0, 2 * sizeof(VkPipelineShaderStageCreateInfo));

    VkShaderObj vs(m_device, bindStateVertShaderText,
                   VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, bindStateFragShaderText,
                   VK_SHADER_STAGE_FRAGMENT_BIT,
                   this); // We shouldn't need a fragment shader
                          // but add it to be able to run on more devices
    shaderStages[0] = vs.GetStageCreateInfo();
    shaderStages[1] = fs.GetStageCreateInfo();

    VkGraphicsPipelineCreateInfo gp_ci = {};
    gp_ci.sType = VK_STRUCTURE_TYPE_GRAPHICS_PIPELINE_CREATE_INFO;
    gp_ci.stageCount = 2;
    gp_ci.pStages = shaderStages;
    gp_ci.pViewportState = &vp_state_ci;
    gp_ci.pRasterizationState = &rs_state_ci;
    gp_ci.flags = VK_PIPELINE_CREATE_DISABLE_OPTIMIZATION_BIT;
    gp_ci.layout = pipeline_layout;
    gp_ci.renderPass = renderPass();

    VkPipelineCacheCreateInfo pc_ci = {};
    pc_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_CACHE_CREATE_INFO;

    VkPipeline pipeline;
    VkPipelineCache pipelineCache;

    err =
        vkCreatePipelineCache(m_device->device(), &pc_ci, NULL, &pipelineCache);
    ASSERT_VK_SUCCESS(err);
    err = vkCreateGraphicsPipelines(m_device->device(), pipelineCache, 1,
                                    &gp_ci, NULL, &pipeline);

    m_errorMonitor->VerifyFound();

    vkDestroyPipelineCache(m_device->device(), pipelineCache, NULL);
    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}
// Don't set viewport state in PSO. This is an error b/c we always need this
// state
//  for the counts even if the data is going to be set dynamically.
TEST_F(VkLayerTest, PSOViewportStateNotSet) {
    // Attempt to Create Gfx Pipeline w/o a VS
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Gfx Pipeline pViewportState is null. Even if ");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.setLayoutCount = 1;
    pipeline_layout_ci.pSetLayouts = &ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    VkDynamicState sc_state = VK_DYNAMIC_STATE_SCISSOR;
    // Set scissor as dynamic to avoid second error
    VkPipelineDynamicStateCreateInfo dyn_state_ci = {};
    dyn_state_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_DYNAMIC_STATE_CREATE_INFO;
    dyn_state_ci.dynamicStateCount = 1;
    dyn_state_ci.pDynamicStates = &sc_state;

    VkPipelineShaderStageCreateInfo shaderStages[2];
    memset(&shaderStages, 0, 2 * sizeof(VkPipelineShaderStageCreateInfo));

    VkShaderObj vs(m_device, bindStateVertShaderText,
                   VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, bindStateFragShaderText,
                   VK_SHADER_STAGE_FRAGMENT_BIT,
                   this); // We shouldn't need a fragment shader
                          // but add it to be able to run on more devices
    shaderStages[0] = vs.GetStageCreateInfo();
    shaderStages[1] = fs.GetStageCreateInfo();


    VkPipelineRasterizationStateCreateInfo rs_state_ci = {};
    rs_state_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_RASTERIZATION_STATE_CREATE_INFO;
    rs_state_ci.polygonMode = VK_POLYGON_MODE_FILL;
    rs_state_ci.cullMode = VK_CULL_MODE_BACK_BIT;
    rs_state_ci.frontFace = VK_FRONT_FACE_COUNTER_CLOCKWISE;
    rs_state_ci.depthClampEnable = VK_FALSE;
    rs_state_ci.rasterizerDiscardEnable = VK_FALSE;
    rs_state_ci.depthBiasEnable = VK_FALSE;

    VkGraphicsPipelineCreateInfo gp_ci = {};
    gp_ci.sType = VK_STRUCTURE_TYPE_GRAPHICS_PIPELINE_CREATE_INFO;
    gp_ci.stageCount = 2;
    gp_ci.pStages = shaderStages;
    gp_ci.pRasterizationState = &rs_state_ci;
    gp_ci.pViewportState = NULL; // Not setting VP state w/o dynamic vp state
                                 // should cause validation error
    gp_ci.pDynamicState = &dyn_state_ci;
    gp_ci.flags = VK_PIPELINE_CREATE_DISABLE_OPTIMIZATION_BIT;
    gp_ci.layout = pipeline_layout;
    gp_ci.renderPass = renderPass();

    VkPipelineCacheCreateInfo pc_ci = {};
    pc_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_CACHE_CREATE_INFO;

    VkPipeline pipeline;
    VkPipelineCache pipelineCache;

    err =
        vkCreatePipelineCache(m_device->device(), &pc_ci, NULL, &pipelineCache);
    ASSERT_VK_SUCCESS(err);
    err = vkCreateGraphicsPipelines(m_device->device(), pipelineCache, 1,
                                    &gp_ci, NULL, &pipeline);

    m_errorMonitor->VerifyFound();

    vkDestroyPipelineCache(m_device->device(), pipelineCache, NULL);
    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}
// Create PSO w/o non-zero viewportCount but no viewport data
// Then run second test where dynamic scissor count doesn't match PSO scissor
// count
TEST_F(VkLayerTest, PSOViewportCountWithoutDataAndDynScissorMismatch) {
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Gfx Pipeline viewportCount is 1, but pViewports is NULL. ");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.setLayoutCount = 1;
    pipeline_layout_ci.pSetLayouts = &ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    VkPipelineViewportStateCreateInfo vp_state_ci = {};
    vp_state_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_VIEWPORT_STATE_CREATE_INFO;
    vp_state_ci.viewportCount = 1;
    vp_state_ci.pViewports = NULL; // Null vp w/ count of 1 should cause error
    vp_state_ci.scissorCount = 1;
    vp_state_ci.pScissors =
        NULL; // Scissor is dynamic (below) so this won't cause error

    VkDynamicState sc_state = VK_DYNAMIC_STATE_SCISSOR;
    // Set scissor as dynamic to avoid that error
    VkPipelineDynamicStateCreateInfo dyn_state_ci = {};
    dyn_state_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_DYNAMIC_STATE_CREATE_INFO;
    dyn_state_ci.dynamicStateCount = 1;
    dyn_state_ci.pDynamicStates = &sc_state;

    VkPipelineShaderStageCreateInfo shaderStages[2];
    memset(&shaderStages, 0, 2 * sizeof(VkPipelineShaderStageCreateInfo));

    VkShaderObj vs(m_device, bindStateVertShaderText,
                   VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, bindStateFragShaderText,
                   VK_SHADER_STAGE_FRAGMENT_BIT,
                   this); // We shouldn't need a fragment shader
                          // but add it to be able to run on more devices
    shaderStages[0] = vs.GetStageCreateInfo();
    shaderStages[1] = fs.GetStageCreateInfo();

    VkPipelineVertexInputStateCreateInfo vi_ci = {};
    vi_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_VERTEX_INPUT_STATE_CREATE_INFO;
    vi_ci.pNext = nullptr;
    vi_ci.vertexBindingDescriptionCount = 0;
    vi_ci.pVertexBindingDescriptions = nullptr;
    vi_ci.vertexAttributeDescriptionCount = 0;
    vi_ci.pVertexAttributeDescriptions = nullptr;

    VkPipelineInputAssemblyStateCreateInfo ia_ci = {};
    ia_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_INPUT_ASSEMBLY_STATE_CREATE_INFO;
    ia_ci.topology = VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP;

    VkPipelineRasterizationStateCreateInfo rs_ci = {};
    rs_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_RASTERIZATION_STATE_CREATE_INFO;
    rs_ci.pNext = nullptr;

    VkPipelineColorBlendAttachmentState att = {};
    att.blendEnable = VK_FALSE;
    att.colorWriteMask = 0xf;

    VkPipelineColorBlendStateCreateInfo cb_ci = {};
    cb_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_COLOR_BLEND_STATE_CREATE_INFO;
    cb_ci.pNext = nullptr;
    cb_ci.attachmentCount = 1;
    cb_ci.pAttachments = &att;

    VkGraphicsPipelineCreateInfo gp_ci = {};
    gp_ci.sType = VK_STRUCTURE_TYPE_GRAPHICS_PIPELINE_CREATE_INFO;
    gp_ci.stageCount = 2;
    gp_ci.pStages = shaderStages;
    gp_ci.pVertexInputState = &vi_ci;
    gp_ci.pInputAssemblyState = &ia_ci;
    gp_ci.pViewportState = &vp_state_ci;
    gp_ci.pRasterizationState = &rs_ci;
    gp_ci.pColorBlendState = &cb_ci;
    gp_ci.pDynamicState = &dyn_state_ci;
    gp_ci.flags = VK_PIPELINE_CREATE_DISABLE_OPTIMIZATION_BIT;
    gp_ci.layout = pipeline_layout;
    gp_ci.renderPass = renderPass();

    VkPipelineCacheCreateInfo pc_ci = {};
    pc_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_CACHE_CREATE_INFO;

    VkPipeline pipeline;
    VkPipelineCache pipelineCache;

    err =
        vkCreatePipelineCache(m_device->device(), &pc_ci, NULL, &pipelineCache);
    ASSERT_VK_SUCCESS(err);
    err = vkCreateGraphicsPipelines(m_device->device(), pipelineCache, 1,
                                    &gp_ci, NULL, &pipeline);

    m_errorMonitor->VerifyFound();

    // Now hit second fail case where we set scissor w/ different count than PSO
    // First need to successfully create the PSO from above by setting
    // pViewports
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Dynamic scissorCount from vkCmdSetScissor() is 2, but PSO "
        "scissorCount is 1. These counts must match.");

    VkViewport vp = {}; // Just need dummy vp to point to
    vp_state_ci.pViewports = &vp;
    err = vkCreateGraphicsPipelines(m_device->device(), pipelineCache, 1,
                                    &gp_ci, NULL, &pipeline);
    ASSERT_VK_SUCCESS(err);
    BeginCommandBuffer();
    vkCmdBindPipeline(m_commandBuffer->GetBufferHandle(),
                      VK_PIPELINE_BIND_POINT_GRAPHICS, pipeline);
    VkRect2D scissors[2] = {}; // don't care about data
    // Count of 2 doesn't match PSO count of 1
    vkCmdSetScissor(m_commandBuffer->GetBufferHandle(), 0, 2, scissors);
    Draw(1, 0, 0, 0);

    m_errorMonitor->VerifyFound();

    vkDestroyPipelineCache(m_device->device(), pipelineCache, NULL);
    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
    vkDestroyPipeline(m_device->device(), pipeline, NULL);
}
// Create PSO w/o non-zero scissorCount but no scissor data
// Then run second test where dynamic viewportCount doesn't match PSO
// viewportCount
TEST_F(VkLayerTest, PSOScissorCountWithoutDataAndDynViewportMismatch) {
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Gfx Pipeline scissorCount is 1, but pScissors is NULL. ");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.setLayoutCount = 1;
    pipeline_layout_ci.pSetLayouts = &ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    VkPipelineViewportStateCreateInfo vp_state_ci = {};
    vp_state_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_VIEWPORT_STATE_CREATE_INFO;
    vp_state_ci.scissorCount = 1;
    vp_state_ci.pScissors =
        NULL; // Null scissor w/ count of 1 should cause error
    vp_state_ci.viewportCount = 1;
    vp_state_ci.pViewports =
        NULL; // vp is dynamic (below) so this won't cause error

    VkDynamicState vp_state = VK_DYNAMIC_STATE_VIEWPORT;
    // Set scissor as dynamic to avoid that error
    VkPipelineDynamicStateCreateInfo dyn_state_ci = {};
    dyn_state_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_DYNAMIC_STATE_CREATE_INFO;
    dyn_state_ci.dynamicStateCount = 1;
    dyn_state_ci.pDynamicStates = &vp_state;

    VkPipelineShaderStageCreateInfo shaderStages[2];
    memset(&shaderStages, 0, 2 * sizeof(VkPipelineShaderStageCreateInfo));

    VkShaderObj vs(m_device, bindStateVertShaderText,
                   VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, bindStateFragShaderText,
                   VK_SHADER_STAGE_FRAGMENT_BIT,
                   this); // We shouldn't need a fragment shader
                          // but add it to be able to run on more devices
    shaderStages[0] = vs.GetStageCreateInfo();
    shaderStages[1] = fs.GetStageCreateInfo();

    VkPipelineVertexInputStateCreateInfo vi_ci = {};
    vi_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_VERTEX_INPUT_STATE_CREATE_INFO;
    vi_ci.pNext = nullptr;
    vi_ci.vertexBindingDescriptionCount = 0;
    vi_ci.pVertexBindingDescriptions = nullptr;
    vi_ci.vertexAttributeDescriptionCount = 0;
    vi_ci.pVertexAttributeDescriptions = nullptr;

    VkPipelineInputAssemblyStateCreateInfo ia_ci = {};
    ia_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_INPUT_ASSEMBLY_STATE_CREATE_INFO;
    ia_ci.topology = VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP;

    VkPipelineRasterizationStateCreateInfo rs_ci = {};
    rs_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_RASTERIZATION_STATE_CREATE_INFO;
    rs_ci.pNext = nullptr;

    VkPipelineColorBlendAttachmentState att = {};
    att.blendEnable = VK_FALSE;
    att.colorWriteMask = 0xf;

    VkPipelineColorBlendStateCreateInfo cb_ci = {};
    cb_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_COLOR_BLEND_STATE_CREATE_INFO;
    cb_ci.pNext = nullptr;
    cb_ci.attachmentCount = 1;
    cb_ci.pAttachments = &att;

    VkGraphicsPipelineCreateInfo gp_ci = {};
    gp_ci.sType = VK_STRUCTURE_TYPE_GRAPHICS_PIPELINE_CREATE_INFO;
    gp_ci.stageCount = 2;
    gp_ci.pStages = shaderStages;
    gp_ci.pVertexInputState = &vi_ci;
    gp_ci.pInputAssemblyState = &ia_ci;
    gp_ci.pViewportState = &vp_state_ci;
    gp_ci.pRasterizationState = &rs_ci;
    gp_ci.pColorBlendState = &cb_ci;
    gp_ci.pDynamicState = &dyn_state_ci;
    gp_ci.flags = VK_PIPELINE_CREATE_DISABLE_OPTIMIZATION_BIT;
    gp_ci.layout = pipeline_layout;
    gp_ci.renderPass = renderPass();

    VkPipelineCacheCreateInfo pc_ci = {};
    pc_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_CACHE_CREATE_INFO;

    VkPipeline pipeline;
    VkPipelineCache pipelineCache;

    err =
        vkCreatePipelineCache(m_device->device(), &pc_ci, NULL, &pipelineCache);
    ASSERT_VK_SUCCESS(err);
    err = vkCreateGraphicsPipelines(m_device->device(), pipelineCache, 1,
                                    &gp_ci, NULL, &pipeline);

    m_errorMonitor->VerifyFound();

    // Now hit second fail case where we set scissor w/ different count than PSO
    // First need to successfully create the PSO from above by setting
    // pViewports
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Dynamic viewportCount from vkCmdSetViewport() is 2, but PSO "
        "viewportCount is 1. These counts must match.");

    VkRect2D sc = {}; // Just need dummy vp to point to
    vp_state_ci.pScissors = &sc;
    err = vkCreateGraphicsPipelines(m_device->device(), pipelineCache, 1,
                                    &gp_ci, NULL, &pipeline);
    ASSERT_VK_SUCCESS(err);
    BeginCommandBuffer();
    vkCmdBindPipeline(m_commandBuffer->GetBufferHandle(),
                      VK_PIPELINE_BIND_POINT_GRAPHICS, pipeline);
    VkViewport viewports[2] = {}; // don't care about data
    // Count of 2 doesn't match PSO count of 1
    vkCmdSetViewport(m_commandBuffer->GetBufferHandle(), 0, 2, viewports);
    Draw(1, 0, 0, 0);

    m_errorMonitor->VerifyFound();

    vkDestroyPipelineCache(m_device->device(), pipelineCache, NULL);
    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
    vkDestroyPipeline(m_device->device(), pipeline, NULL);
}

TEST_F(VkLayerTest, PSOLineWidthInvalid) {
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Attempt to set lineWidth to -1");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.setLayoutCount = 1;
    pipeline_layout_ci.pSetLayouts = &ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    VkPipelineViewportStateCreateInfo vp_state_ci = {};
    vp_state_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_VIEWPORT_STATE_CREATE_INFO;
    vp_state_ci.scissorCount = 1;
    vp_state_ci.pScissors = NULL;
    vp_state_ci.viewportCount = 1;
    vp_state_ci.pViewports = NULL;

    VkDynamicState dynamic_states[3] = {VK_DYNAMIC_STATE_VIEWPORT,
                                        VK_DYNAMIC_STATE_SCISSOR,
                                        VK_DYNAMIC_STATE_LINE_WIDTH};
    // Set scissor as dynamic to avoid that error
    VkPipelineDynamicStateCreateInfo dyn_state_ci = {};
    dyn_state_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_DYNAMIC_STATE_CREATE_INFO;
    dyn_state_ci.dynamicStateCount = 2;
    dyn_state_ci.pDynamicStates = dynamic_states;

    VkPipelineShaderStageCreateInfo shaderStages[2];
    memset(&shaderStages, 0, 2 * sizeof(VkPipelineShaderStageCreateInfo));

    VkShaderObj vs(m_device, bindStateVertShaderText,
                   VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, bindStateFragShaderText,
                   VK_SHADER_STAGE_FRAGMENT_BIT,
                   this); // TODO - We shouldn't need a fragment shader
                          // but add it to be able to run on more devices
    shaderStages[0] = vs.GetStageCreateInfo();
    shaderStages[1] = fs.GetStageCreateInfo();

    VkPipelineVertexInputStateCreateInfo vi_ci = {};
    vi_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_VERTEX_INPUT_STATE_CREATE_INFO;
    vi_ci.pNext = nullptr;
    vi_ci.vertexBindingDescriptionCount = 0;
    vi_ci.pVertexBindingDescriptions = nullptr;
    vi_ci.vertexAttributeDescriptionCount = 0;
    vi_ci.pVertexAttributeDescriptions = nullptr;

    VkPipelineInputAssemblyStateCreateInfo ia_ci = {};
    ia_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_INPUT_ASSEMBLY_STATE_CREATE_INFO;
    ia_ci.topology = VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP;

    VkPipelineRasterizationStateCreateInfo rs_ci = {};
    rs_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_RASTERIZATION_STATE_CREATE_INFO;
    rs_ci.pNext = nullptr;

    // Check too low (line width of -1.0f).
    rs_ci.lineWidth = -1.0f;

    VkPipelineColorBlendAttachmentState att = {};
    att.blendEnable = VK_FALSE;
    att.colorWriteMask = 0xf;

    VkPipelineColorBlendStateCreateInfo cb_ci = {};
    cb_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_COLOR_BLEND_STATE_CREATE_INFO;
    cb_ci.pNext = nullptr;
    cb_ci.attachmentCount = 1;
    cb_ci.pAttachments = &att;

    VkGraphicsPipelineCreateInfo gp_ci = {};
    gp_ci.sType = VK_STRUCTURE_TYPE_GRAPHICS_PIPELINE_CREATE_INFO;
    gp_ci.stageCount = 2;
    gp_ci.pStages = shaderStages;
    gp_ci.pVertexInputState = &vi_ci;
    gp_ci.pInputAssemblyState = &ia_ci;
    gp_ci.pViewportState = &vp_state_ci;
    gp_ci.pRasterizationState = &rs_ci;
    gp_ci.pColorBlendState = &cb_ci;
    gp_ci.pDynamicState = &dyn_state_ci;
    gp_ci.flags = VK_PIPELINE_CREATE_DISABLE_OPTIMIZATION_BIT;
    gp_ci.layout = pipeline_layout;
    gp_ci.renderPass = renderPass();

    VkPipelineCacheCreateInfo pc_ci = {};
    pc_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_CACHE_CREATE_INFO;

    VkPipeline pipeline;
    VkPipelineCache pipelineCache;

    err =
        vkCreatePipelineCache(m_device->device(), &pc_ci, NULL, &pipelineCache);
    ASSERT_VK_SUCCESS(err);
    err = vkCreateGraphicsPipelines(m_device->device(), pipelineCache, 1,
                                    &gp_ci, NULL, &pipeline);

    m_errorMonitor->VerifyFound();
    vkDestroyPipelineCache(m_device->device(), pipelineCache, NULL);

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Attempt to set lineWidth to 65536");

    // Check too high (line width of 65536.0f).
    rs_ci.lineWidth = 65536.0f;

    err =
        vkCreatePipelineCache(m_device->device(), &pc_ci, NULL, &pipelineCache);
    ASSERT_VK_SUCCESS(err);
    err = vkCreateGraphicsPipelines(m_device->device(), pipelineCache, 1,
                                    &gp_ci, NULL, &pipeline);

    m_errorMonitor->VerifyFound();
    vkDestroyPipelineCache(m_device->device(), pipelineCache, NULL);

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Attempt to set lineWidth to -1");

    dyn_state_ci.dynamicStateCount = 3;

    rs_ci.lineWidth = 1.0f;

    err =
        vkCreatePipelineCache(m_device->device(), &pc_ci, NULL, &pipelineCache);
    ASSERT_VK_SUCCESS(err);
    err = vkCreateGraphicsPipelines(m_device->device(), pipelineCache, 1,
                                    &gp_ci, NULL, &pipeline);
    BeginCommandBuffer();
    vkCmdBindPipeline(m_commandBuffer->GetBufferHandle(),
                      VK_PIPELINE_BIND_POINT_GRAPHICS, pipeline);

    // Check too low with dynamic setting.
    vkCmdSetLineWidth(m_commandBuffer->GetBufferHandle(), -1.0f);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Attempt to set lineWidth to 65536");

    // Check too high with dynamic setting.
    vkCmdSetLineWidth(m_commandBuffer->GetBufferHandle(), 65536.0f);
    m_errorMonitor->VerifyFound();
    EndCommandBuffer();

    vkDestroyPipelineCache(m_device->device(), pipelineCache, NULL);
    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
    vkDestroyPipeline(m_device->device(), pipeline, NULL);
}

TEST_F(VkLayerTest, NullRenderPass) {
    // Bind a NULL RenderPass
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "You cannot use a NULL RenderPass object in vkCmdBeginRenderPass()");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    BeginCommandBuffer();
    // Don't care about RenderPass handle b/c error should be flagged before
    // that
    vkCmdBeginRenderPass(m_commandBuffer->GetBufferHandle(), NULL,
                         VK_SUBPASS_CONTENTS_INLINE);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, RenderPassWithinRenderPass) {
    // Bind a BeginRenderPass within an active RenderPass
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "It is invalid to issue this call inside an active render pass");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    BeginCommandBuffer();
    // Just create a dummy Renderpass that's non-NULL so we can get to the
    // proper error
    VkRenderPassBeginInfo rp_begin = {};
    rp_begin.sType = VK_STRUCTURE_TYPE_RENDER_PASS_BEGIN_INFO;
    rp_begin.pNext = NULL;
    rp_begin.renderPass = renderPass();
    rp_begin.framebuffer = framebuffer();

    vkCmdBeginRenderPass(m_commandBuffer->GetBufferHandle(), &rp_begin,
                         VK_SUBPASS_CONTENTS_INLINE);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, RenderPassClearOpMismatch) {
    TEST_DESCRIPTION("Begin a renderPass where clearValueCount is less than"
                     "the number of renderPass attachments that use loadOp"
                     "VK_ATTACHMENT_LOAD_OP_CLEAR.");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    // Create a renderPass with a single attachment that uses loadOp CLEAR
    VkAttachmentReference attach = {};
    attach.layout = VK_IMAGE_LAYOUT_GENERAL;
    VkSubpassDescription subpass = {};
    subpass.inputAttachmentCount = 1;
    subpass.pInputAttachments = &attach;
    VkRenderPassCreateInfo rpci = {};
    rpci.subpassCount = 1;
    rpci.pSubpasses = &subpass;
    rpci.attachmentCount = 1;
    VkAttachmentDescription attach_desc = {};
    attach_desc.format = VK_FORMAT_UNDEFINED;
    // Set loadOp to CLEAR
    attach_desc.loadOp = VK_ATTACHMENT_LOAD_OP_CLEAR;
    rpci.pAttachments = &attach_desc;
    rpci.sType = VK_STRUCTURE_TYPE_RENDER_PASS_CREATE_INFO;
    VkRenderPass rp;
    vkCreateRenderPass(m_device->device(), &rpci, NULL, &rp);

    VkCommandBufferInheritanceInfo hinfo = {};
    hinfo.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_INHERITANCE_INFO;
    hinfo.renderPass = VK_NULL_HANDLE;
    hinfo.subpass = 0;
    hinfo.framebuffer = VK_NULL_HANDLE;
    hinfo.occlusionQueryEnable = VK_FALSE;
    hinfo.queryFlags = 0;
    hinfo.pipelineStatistics = 0;
    VkCommandBufferBeginInfo info = {};
    info.flags = VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT;
    info.sType = VK_STRUCTURE_TYPE_COMMAND_BUFFER_BEGIN_INFO;
    info.pInheritanceInfo = &hinfo;

    vkBeginCommandBuffer(m_commandBuffer->handle(), &info);
    VkRenderPassBeginInfo rp_begin = {};
    rp_begin.sType = VK_STRUCTURE_TYPE_RENDER_PASS_BEGIN_INFO;
    rp_begin.pNext = NULL;
    rp_begin.renderPass = renderPass();
    rp_begin.framebuffer = framebuffer();
    rp_begin.clearValueCount = 0; // Should be 1

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         " has a clearValueCount of 0 but the "
                                         "actual number of attachments in "
                                         "renderPass ");

    vkCmdBeginRenderPass(m_commandBuffer->GetBufferHandle(), &rp_begin,
                         VK_SUBPASS_CONTENTS_INLINE);

    m_errorMonitor->VerifyFound();

    vkDestroyRenderPass(m_device->device(), rp, NULL);
}

TEST_F(VkLayerTest, EndCommandBufferWithinRenderPass) {

    TEST_DESCRIPTION("End a command buffer with an active render pass");

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "It is invalid to issue this call inside an active render pass");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    // The framework's BeginCommandBuffer calls CreateRenderPass
    BeginCommandBuffer();

    // Call directly into vkEndCommandBuffer instead of the
    // the framework's EndCommandBuffer, which inserts a
    // vkEndRenderPass
    vkEndCommandBuffer(m_commandBuffer->GetBufferHandle());

    m_errorMonitor->VerifyFound();

   // TODO: Add test for VK_COMMAND_BUFFER_LEVEL_SECONDARY
   // TODO: Add test for VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT
}

TEST_F(VkLayerTest, FillBufferWithinRenderPass) {
    // Call CmdFillBuffer within an active renderpass
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "It is invalid to issue this call inside an active render pass");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    // Renderpass is started here
    BeginCommandBuffer();

    VkMemoryPropertyFlags reqs = VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT;
    vk_testing::Buffer dstBuffer;
    dstBuffer.init_as_dst(*m_device, (VkDeviceSize)1024, reqs);

    m_commandBuffer->FillBuffer(dstBuffer.handle(), 0, 4, 0x11111111);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, UpdateBufferWithinRenderPass) {
    // Call CmdUpdateBuffer within an active renderpass
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "It is invalid to issue this call inside an active render pass");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    // Renderpass is started here
    BeginCommandBuffer();

    VkMemoryPropertyFlags reqs = VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT;
    vk_testing::Buffer dstBuffer;
    dstBuffer.init_as_dst(*m_device, (VkDeviceSize)1024, reqs);

    VkDeviceSize dstOffset = 0;
    VkDeviceSize dataSize = 1024;
    const uint32_t *pData = NULL;

    vkCmdUpdateBuffer(m_commandBuffer->GetBufferHandle(), dstBuffer.handle(),
                      dstOffset, dataSize, pData);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, ClearColorImageWithinRenderPass) {
    // Call CmdClearColorImage within an active RenderPass
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "It is invalid to issue this call inside an active render pass");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    // Renderpass is started here
    BeginCommandBuffer();

    VkClearColorValue clear_color;
    memset(clear_color.uint32, 0, sizeof(uint32_t) * 4);
    VkMemoryPropertyFlags reqs = VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT;
    const VkFormat tex_format = VK_FORMAT_B8G8R8A8_UNORM;
    const int32_t tex_width = 32;
    const int32_t tex_height = 32;
    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = tex_format;
    image_create_info.extent.width = tex_width;
    image_create_info.extent.height = tex_height;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_LINEAR;
    image_create_info.usage = VK_IMAGE_USAGE_SAMPLED_BIT;

    vk_testing::Image dstImage;
    dstImage.init(*m_device, (const VkImageCreateInfo &)image_create_info,
                  reqs);

    const VkImageSubresourceRange range = vk_testing::Image::subresource_range(
        image_create_info, VK_IMAGE_ASPECT_COLOR_BIT);

    vkCmdClearColorImage(m_commandBuffer->GetBufferHandle(), dstImage.handle(),
                         VK_IMAGE_LAYOUT_GENERAL, &clear_color, 1, &range);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, ClearDepthStencilImageWithinRenderPass) {
    // Call CmdClearDepthStencilImage within an active RenderPass
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "It is invalid to issue this call inside an active render pass");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    // Renderpass is started here
    BeginCommandBuffer();

    VkClearDepthStencilValue clear_value = {0};
    VkMemoryPropertyFlags reqs = 0;
    VkImageCreateInfo image_create_info = vk_testing::Image::create_info();
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = VK_FORMAT_D24_UNORM_S8_UINT;
    image_create_info.extent.width = 64;
    image_create_info.extent.height = 64;
    image_create_info.tiling = VK_IMAGE_TILING_OPTIMAL;
    image_create_info.usage = VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT;

    vk_testing::Image dstImage;
    dstImage.init(*m_device, (const VkImageCreateInfo &)image_create_info,
                  reqs);

    const VkImageSubresourceRange range = vk_testing::Image::subresource_range(
        image_create_info, VK_IMAGE_ASPECT_DEPTH_BIT);

    vkCmdClearDepthStencilImage(
        m_commandBuffer->GetBufferHandle(), dstImage.handle(),
        VK_IMAGE_LAYOUT_DEPTH_STENCIL_ATTACHMENT_OPTIMAL, &clear_value, 1,
        &range);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, ClearColorAttachmentsOutsideRenderPass) {
    // Call CmdClearAttachmentss outside of an active RenderPass
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "vkCmdClearAttachments: This call "
                                         "must be issued inside an active "
                                         "render pass");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    // Start no RenderPass
    err = m_commandBuffer->BeginCommandBuffer();
    ASSERT_VK_SUCCESS(err);

    VkClearAttachment color_attachment;
    color_attachment.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    color_attachment.clearValue.color.float32[0] = 0;
    color_attachment.clearValue.color.float32[1] = 0;
    color_attachment.clearValue.color.float32[2] = 0;
    color_attachment.clearValue.color.float32[3] = 0;
    color_attachment.colorAttachment = 0;
    VkClearRect clear_rect = {{{0, 0}, {32, 32}}};
    vkCmdClearAttachments(m_commandBuffer->GetBufferHandle(), 1,
                          &color_attachment, 1, &clear_rect);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, BufferMemoryBarrierNoBuffer) {
    // Try to add a buffer memory barrier with no buffer.
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "required parameter pBufferMemoryBarriers[i].buffer specified as VK_NULL_HANDLE");

    ASSERT_NO_FATAL_FAILURE(InitState());
    BeginCommandBuffer();

    VkBufferMemoryBarrier buf_barrier = {};
    buf_barrier.sType = VK_STRUCTURE_TYPE_BUFFER_MEMORY_BARRIER;
    buf_barrier.srcAccessMask = VK_ACCESS_HOST_WRITE_BIT;
    buf_barrier.dstAccessMask = VK_ACCESS_SHADER_READ_BIT;
    buf_barrier.srcQueueFamilyIndex = VK_QUEUE_FAMILY_IGNORED;
    buf_barrier.dstQueueFamilyIndex = VK_QUEUE_FAMILY_IGNORED;
    buf_barrier.buffer = VK_NULL_HANDLE;
    buf_barrier.offset = 0;
    buf_barrier.size = VK_WHOLE_SIZE;
    vkCmdPipelineBarrier(m_commandBuffer->GetBufferHandle(),
            VK_PIPELINE_STAGE_HOST_BIT, VK_PIPELINE_STAGE_VERTEX_SHADER_BIT,
            0, 0, nullptr, 1, &buf_barrier, 0, nullptr);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, InvalidBarriers) {
    TEST_DESCRIPTION("A variety of ways to get VK_INVALID_BARRIER ");

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT, "Barriers cannot be set during subpass");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkMemoryBarrier mem_barrier = {};
    mem_barrier.sType = VK_STRUCTURE_TYPE_MEMORY_BARRIER;
    mem_barrier.pNext = NULL;
    mem_barrier.srcAccessMask = VK_ACCESS_HOST_WRITE_BIT;
    mem_barrier.dstAccessMask = VK_ACCESS_SHADER_READ_BIT;
    BeginCommandBuffer();
    // BeginCommandBuffer() starts a render pass
    vkCmdPipelineBarrier(m_commandBuffer->GetBufferHandle(),
                         VK_PIPELINE_STAGE_HOST_BIT,
                         VK_PIPELINE_STAGE_VERTEX_SHADER_BIT, 0, 1,
                         &mem_barrier, 0, nullptr, 0, nullptr);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Image Layout cannot be transitioned to UNDEFINED");
    VkImageObj image(m_device);
    image.init(128, 128, VK_FORMAT_B8G8R8A8_UNORM,
               VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT, VK_IMAGE_TILING_OPTIMAL, 0);
    ASSERT_TRUE(image.initialized());
    VkImageMemoryBarrier img_barrier = {};
    img_barrier.sType = VK_STRUCTURE_TYPE_IMAGE_MEMORY_BARRIER;
    img_barrier.pNext = NULL;
    img_barrier.srcAccessMask = VK_ACCESS_HOST_WRITE_BIT;
    img_barrier.dstAccessMask = VK_ACCESS_SHADER_READ_BIT;
    img_barrier.oldLayout = VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL;
    // New layout can't be UNDEFINED
    img_barrier.newLayout = VK_IMAGE_LAYOUT_UNDEFINED;
    img_barrier.image = image.handle();
    img_barrier.srcQueueFamilyIndex = VK_QUEUE_FAMILY_IGNORED;
    img_barrier.dstQueueFamilyIndex = VK_QUEUE_FAMILY_IGNORED;
    img_barrier.subresourceRange.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    img_barrier.subresourceRange.baseArrayLayer = 0;
    img_barrier.subresourceRange.baseMipLevel = 0;
    img_barrier.subresourceRange.layerCount = 1;
    img_barrier.subresourceRange.levelCount = 1;
    vkCmdPipelineBarrier(m_commandBuffer->GetBufferHandle(),
                         VK_PIPELINE_STAGE_HOST_BIT,
                         VK_PIPELINE_STAGE_VERTEX_SHADER_BIT, 0, 0, nullptr, 0,
                         nullptr, 1, &img_barrier);
    m_errorMonitor->VerifyFound();
    img_barrier.newLayout = VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Subresource must have the sum of the "
                                         "baseArrayLayer");
    // baseArrayLayer + layerCount must be <= image's arrayLayers
    img_barrier.subresourceRange.baseArrayLayer = 1;
    vkCmdPipelineBarrier(m_commandBuffer->GetBufferHandle(),
                         VK_PIPELINE_STAGE_HOST_BIT,
                         VK_PIPELINE_STAGE_VERTEX_SHADER_BIT, 0, 0, nullptr, 0,
                         nullptr, 1, &img_barrier);
    m_errorMonitor->VerifyFound();
    img_barrier.subresourceRange.baseArrayLayer = 0;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Subresource must have the sum of the baseMipLevel");
    // baseMipLevel + levelCount must be <= image's mipLevels
    img_barrier.subresourceRange.baseMipLevel = 1;
    vkCmdPipelineBarrier(m_commandBuffer->GetBufferHandle(),
                         VK_PIPELINE_STAGE_HOST_BIT,
                         VK_PIPELINE_STAGE_VERTEX_SHADER_BIT, 0, 0, nullptr, 0,
                         nullptr, 1, &img_barrier);
    m_errorMonitor->VerifyFound();
    img_barrier.subresourceRange.baseMipLevel = 0;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Buffer Barriers cannot be used during a render pass");
    vk_testing::Buffer buffer;
    buffer.init(*m_device, 256);
    VkBufferMemoryBarrier buf_barrier = {};
    buf_barrier.sType = VK_STRUCTURE_TYPE_BUFFER_MEMORY_BARRIER;
    buf_barrier.pNext = NULL;
    buf_barrier.srcAccessMask = VK_ACCESS_HOST_WRITE_BIT;
    buf_barrier.dstAccessMask = VK_ACCESS_SHADER_READ_BIT;
    buf_barrier.buffer = buffer.handle();
    buf_barrier.srcQueueFamilyIndex = VK_QUEUE_FAMILY_IGNORED;
    buf_barrier.dstQueueFamilyIndex = VK_QUEUE_FAMILY_IGNORED;
    buf_barrier.offset = 0;
    buf_barrier.size = VK_WHOLE_SIZE;
    // Can't send buffer barrier during a render pass
    vkCmdPipelineBarrier(m_commandBuffer->GetBufferHandle(),
                         VK_PIPELINE_STAGE_HOST_BIT,
                         VK_PIPELINE_STAGE_VERTEX_SHADER_BIT, 0, 0, nullptr, 1,
                         &buf_barrier, 0, nullptr);
    m_errorMonitor->VerifyFound();
    vkCmdEndRenderPass(m_commandBuffer->GetBufferHandle());

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "which is not less than total size");
    buf_barrier.offset = 257;
    // Offset greater than total size
    vkCmdPipelineBarrier(m_commandBuffer->GetBufferHandle(),
                         VK_PIPELINE_STAGE_HOST_BIT,
                         VK_PIPELINE_STAGE_VERTEX_SHADER_BIT, 0, 0, nullptr, 1,
                         &buf_barrier, 0, nullptr);
    m_errorMonitor->VerifyFound();
    buf_barrier.offset = 0;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT, "whose sum is greater than total size");
    buf_barrier.size = 257;
    // Size greater than total size
    vkCmdPipelineBarrier(m_commandBuffer->GetBufferHandle(),
                         VK_PIPELINE_STAGE_HOST_BIT,
                         VK_PIPELINE_STAGE_VERTEX_SHADER_BIT, 0, 0, nullptr, 1,
                         &buf_barrier, 0, nullptr);
    m_errorMonitor->VerifyFound();
    buf_barrier.size = VK_WHOLE_SIZE;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Image is a depth and stencil format and thus must "
        "have both VK_IMAGE_ASPECT_DEPTH_BIT and "
        "VK_IMAGE_ASPECT_STENCIL_BIT set.");
    VkDepthStencilObj ds_image(m_device);
    ds_image.Init(m_device, 128, 128, VK_FORMAT_D24_UNORM_S8_UINT);
    ASSERT_TRUE(ds_image.initialized());
    img_barrier.oldLayout = VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL;
    img_barrier.newLayout = VK_IMAGE_LAYOUT_DEPTH_STENCIL_ATTACHMENT_OPTIMAL;
    img_barrier.image = ds_image.handle();
    // Leave aspectMask at COLOR on purpose
    vkCmdPipelineBarrier(m_commandBuffer->GetBufferHandle(),
                         VK_PIPELINE_STAGE_HOST_BIT,
                         VK_PIPELINE_STAGE_VERTEX_SHADER_BIT, 0, 0, nullptr, 0,
                         nullptr, 1, &img_barrier);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, IdxBufferAlignmentError) {
    // Bind a BeginRenderPass within an active RenderPass
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCmdBindIndexBuffer() offset (0x7) does not fall on ");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());
    uint32_t qfi = 0;
    VkBufferCreateInfo buffCI = {};
    buffCI.sType = VK_STRUCTURE_TYPE_BUFFER_CREATE_INFO;
    buffCI.size = 1024;
    buffCI.usage = VK_BUFFER_USAGE_INDEX_BUFFER_BIT;
    buffCI.queueFamilyIndexCount = 1;
    buffCI.pQueueFamilyIndices = &qfi;

    VkBuffer ib;
    err = vkCreateBuffer(m_device->device(), &buffCI, NULL, &ib);
    ASSERT_VK_SUCCESS(err);

    BeginCommandBuffer();
    ASSERT_VK_SUCCESS(err);
    // vkCmdBindPipeline(m_commandBuffer->GetBufferHandle(),
    // VK_PIPELINE_BIND_POINT_GRAPHICS, pipe.handle());
    // Should error before calling to driver so don't care about actual data
    vkCmdBindIndexBuffer(m_commandBuffer->GetBufferHandle(), ib, 7,
                         VK_INDEX_TYPE_UINT16);

    m_errorMonitor->VerifyFound();

    vkDestroyBuffer(m_device->device(), ib, NULL);
}

TEST_F(VkLayerTest, InvalidQueueFamilyIndex) {
    // Create an out-of-range queueFamilyIndex
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCreateBuffer: pCreateInfo->pQueueFamilyIndices[0] (777) must be one "
        "of the indices specified when the device was created, via the "
        "VkDeviceQueueCreateInfo structure.");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());
    VkBufferCreateInfo buffCI = {};
    buffCI.sType = VK_STRUCTURE_TYPE_BUFFER_CREATE_INFO;
    buffCI.size = 1024;
    buffCI.usage = VK_BUFFER_USAGE_INDEX_BUFFER_BIT;
    buffCI.queueFamilyIndexCount = 1;
    // Introduce failure by specifying invalid queue_family_index
    uint32_t qfi = 777;
    buffCI.pQueueFamilyIndices = &qfi;
    buffCI.sharingMode = VK_SHARING_MODE_CONCURRENT; // qfi only matters in CONCURRENT mode

    VkBuffer ib;
    vkCreateBuffer(m_device->device(), &buffCI, NULL, &ib);

    m_errorMonitor->VerifyFound();
    vkDestroyBuffer(m_device->device(), ib, NULL);
}

TEST_F(VkLayerTest, ExecuteCommandsPrimaryCB) {
    // Attempt vkCmdExecuteCommands w/ a primary cmd buffer (should only be
    // secondary)

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCmdExecuteCommands() called w/ Primary Cmd Buffer ");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    BeginCommandBuffer();
    // ASSERT_VK_SUCCESS(err);
    VkCommandBuffer primCB = m_commandBuffer->GetBufferHandle();
    vkCmdExecuteCommands(m_commandBuffer->GetBufferHandle(), 1, &primCB);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, DSUsageBitsErrors) {
    TEST_DESCRIPTION("Attempt to update descriptor sets for images and buffers "
                     "that do not have correct usage bits sets.");
    VkResult err;

    ASSERT_NO_FATAL_FAILURE(InitState());
    VkDescriptorPoolSize ds_type_count[VK_DESCRIPTOR_TYPE_RANGE_SIZE] = {};
    for (uint32_t i = 0; i < VK_DESCRIPTOR_TYPE_RANGE_SIZE; ++i) {
        ds_type_count[i].type = VkDescriptorType(i);
        ds_type_count[i].descriptorCount = 1;
    }
    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = VK_DESCRIPTOR_TYPE_RANGE_SIZE;
    ds_pool_ci.poolSizeCount = VK_DESCRIPTOR_TYPE_RANGE_SIZE;
    ds_pool_ci.pPoolSizes = ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    // Create 10 layouts where each has a single descriptor of different type
    VkDescriptorSetLayoutBinding dsl_binding[VK_DESCRIPTOR_TYPE_RANGE_SIZE] =
        {};
    for (uint32_t i = 0; i < VK_DESCRIPTOR_TYPE_RANGE_SIZE; ++i) {
        dsl_binding[i].binding = 0;
        dsl_binding[i].descriptorType = VkDescriptorType(i);
        dsl_binding[i].descriptorCount = 1;
        dsl_binding[i].stageFlags = VK_SHADER_STAGE_ALL;
        dsl_binding[i].pImmutableSamplers = NULL;
    }

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    VkDescriptorSetLayout ds_layouts[VK_DESCRIPTOR_TYPE_RANGE_SIZE];
    for (uint32_t i = 0; i < VK_DESCRIPTOR_TYPE_RANGE_SIZE; ++i) {
        ds_layout_ci.pBindings = dsl_binding + i;
        err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci,
                                          NULL, ds_layouts + i);
        ASSERT_VK_SUCCESS(err);
    }
    VkDescriptorSet descriptor_sets[VK_DESCRIPTOR_TYPE_RANGE_SIZE] = {};
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = VK_DESCRIPTOR_TYPE_RANGE_SIZE;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = ds_layouts;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   descriptor_sets);
    ASSERT_VK_SUCCESS(err);

    // Create a buffer & bufferView to be used for invalid updates
    VkBufferCreateInfo buff_ci = {};
    buff_ci.sType = VK_STRUCTURE_TYPE_BUFFER_CREATE_INFO;
    // This usage is not valid for any descriptor type
    buff_ci.usage = VK_BUFFER_USAGE_TRANSFER_SRC_BIT;
    buff_ci.size = 256;
    buff_ci.sharingMode = VK_SHARING_MODE_EXCLUSIVE;
    VkBuffer buffer;
    err = vkCreateBuffer(m_device->device(), &buff_ci, NULL, &buffer);
    ASSERT_VK_SUCCESS(err);

    VkBufferViewCreateInfo buff_view_ci = {};
    buff_view_ci.sType = VK_STRUCTURE_TYPE_BUFFER_VIEW_CREATE_INFO;
    buff_view_ci.buffer = buffer;
    buff_view_ci.format = VK_FORMAT_R8_UNORM;
    buff_view_ci.range = VK_WHOLE_SIZE;
    VkBufferView buff_view;
    err =
        vkCreateBufferView(m_device->device(), &buff_view_ci, NULL, &buff_view);
    ASSERT_VK_SUCCESS(err);

    // Create an image to be used for invalid updates
    VkImageCreateInfo image_ci = {};
    image_ci.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_ci.imageType = VK_IMAGE_TYPE_2D;
    image_ci.format = VK_FORMAT_R8G8B8A8_UNORM;
    image_ci.extent.width = 64;
    image_ci.extent.height = 64;
    image_ci.extent.depth = 1;
    image_ci.mipLevels = 1;
    image_ci.arrayLayers = 1;
    image_ci.samples = VK_SAMPLE_COUNT_1_BIT;
    image_ci.tiling = VK_IMAGE_TILING_LINEAR;
    image_ci.initialLayout = VK_IMAGE_LAYOUT_PREINITIALIZED;
    // This usage is not valid for any descriptor type
    image_ci.usage = VK_IMAGE_USAGE_TRANSFER_SRC_BIT;
    image_ci.sharingMode = VK_SHARING_MODE_EXCLUSIVE;
    VkImage image;
    err = vkCreateImage(m_device->device(), &image_ci, NULL, &image);
    ASSERT_VK_SUCCESS(err);
    // Bind memory to image
    VkMemoryRequirements mem_reqs;
    VkDeviceMemory image_mem;
    bool pass;
    VkMemoryAllocateInfo mem_alloc = {};
    mem_alloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    mem_alloc.pNext = NULL;
    mem_alloc.allocationSize = 0;
    mem_alloc.memoryTypeIndex = 0;
    vkGetImageMemoryRequirements(m_device->device(), image, &mem_reqs);
    mem_alloc.allocationSize = mem_reqs.size;
    pass =
        m_device->phy().set_memory_type(mem_reqs.memoryTypeBits, &mem_alloc, 0);
    ASSERT_TRUE(pass);
    err = vkAllocateMemory(m_device->device(), &mem_alloc, NULL, &image_mem);
    ASSERT_VK_SUCCESS(err);
    err = vkBindImageMemory(m_device->device(), image, image_mem, 0);
    ASSERT_VK_SUCCESS(err);
    // Now create view for image
    VkImageViewCreateInfo image_view_ci = {};
    image_view_ci.sType = VK_STRUCTURE_TYPE_IMAGE_VIEW_CREATE_INFO;
    image_view_ci.image = image;
    image_view_ci.format = VK_FORMAT_R8G8B8A8_UNORM;
    image_view_ci.viewType = VK_IMAGE_VIEW_TYPE_2D;
    image_view_ci.subresourceRange.layerCount = 1;
    image_view_ci.subresourceRange.baseArrayLayer = 0;
    image_view_ci.subresourceRange.levelCount = 1;
    image_view_ci.subresourceRange.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    VkImageView image_view;
    err = vkCreateImageView(m_device->device(), &image_view_ci, NULL,
                            &image_view);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorBufferInfo buff_info = {};
    buff_info.buffer = buffer;
    VkDescriptorImageInfo img_info = {};
    img_info.imageView = image_view;
    VkWriteDescriptorSet descriptor_write = {};
    descriptor_write.sType = VK_STRUCTURE_TYPE_WRITE_DESCRIPTOR_SET;
    descriptor_write.dstBinding = 0;
    descriptor_write.descriptorCount = 1;
    descriptor_write.pTexelBufferView = &buff_view;
    descriptor_write.pBufferInfo = &buff_info;
    descriptor_write.pImageInfo = &img_info;

    // These error messages align with VkDescriptorType struct
    const char *error_msgs[] = {
        "", // placeholder, no error for SAMPLER descriptor
        " does not have VK_IMAGE_USAGE_SAMPLED_BIT set.",
        " does not have VK_IMAGE_USAGE_SAMPLED_BIT set.",
        " does not have VK_IMAGE_USAGE_STORAGE_BIT set.",
        " does not have VK_BUFFER_USAGE_UNIFORM_TEXEL_BUFFER_BIT set.",
        " does not have VK_BUFFER_USAGE_STORAGE_TEXEL_BUFFER_BIT set.",
        " does not have VK_BUFFER_USAGE_UNIFORM_BUFFER_BIT set.",
        " does not have VK_BUFFER_USAGE_STORAGE_BUFFER_BIT set.",
        " does not have VK_BUFFER_USAGE_UNIFORM_BUFFER_BIT set.",
        " does not have VK_BUFFER_USAGE_STORAGE_BUFFER_BIT set.",
        " does not have VK_IMAGE_USAGE_INPUT_ATTACHMENT_BIT set."};
    // Start loop at 1 as SAMPLER desc type has no usage bit error
    for (uint32_t i = 1; i < VK_DESCRIPTOR_TYPE_RANGE_SIZE; ++i) {
        descriptor_write.descriptorType = VkDescriptorType(i);
        descriptor_write.dstSet = descriptor_sets[i];
        m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                             error_msgs[i]);

        vkUpdateDescriptorSets(m_device->device(), 1, &descriptor_write, 0,
                               NULL);

        m_errorMonitor->VerifyFound();
        vkDestroyDescriptorSetLayout(m_device->device(), ds_layouts[i], NULL);
    }
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layouts[0], NULL);
    vkDestroyImage(m_device->device(), image, NULL);
    vkFreeMemory(m_device->device(), image_mem, NULL);
    vkDestroyImageView(m_device->device(), image_view, NULL);
    vkDestroyBuffer(m_device->device(), buffer, NULL);
    vkDestroyBufferView(m_device->device(), buff_view, NULL);
    vkFreeDescriptorSets(m_device->device(), ds_pool,
                         VK_DESCRIPTOR_TYPE_RANGE_SIZE, descriptor_sets);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, DSTypeMismatch) {
    // Create DS w/ layout of one type and attempt Update w/ mis-matched type
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " binding #0 with type VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER but update "
        "type is VK_DESCRIPTOR_TYPE_SAMPLER");

    ASSERT_NO_FATAL_FAILURE(InitState());
    // VkDescriptorSetObj descriptorSet(m_device);
    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);
    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkSamplerCreateInfo sampler_ci = {};
    sampler_ci.sType = VK_STRUCTURE_TYPE_SAMPLER_CREATE_INFO;
    sampler_ci.pNext = NULL;
    sampler_ci.magFilter = VK_FILTER_NEAREST;
    sampler_ci.minFilter = VK_FILTER_NEAREST;
    sampler_ci.mipmapMode = VK_SAMPLER_MIPMAP_MODE_NEAREST;
    sampler_ci.addressModeU = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.addressModeV = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.addressModeW = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.mipLodBias = 1.0;
    sampler_ci.anisotropyEnable = VK_FALSE;
    sampler_ci.maxAnisotropy = 1;
    sampler_ci.compareEnable = VK_FALSE;
    sampler_ci.compareOp = VK_COMPARE_OP_NEVER;
    sampler_ci.minLod = 1.0;
    sampler_ci.maxLod = 1.0;
    sampler_ci.borderColor = VK_BORDER_COLOR_FLOAT_OPAQUE_WHITE;
    sampler_ci.unnormalizedCoordinates = VK_FALSE;
    VkSampler sampler;
    err = vkCreateSampler(m_device->device(), &sampler_ci, NULL, &sampler);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorImageInfo info = {};
    info.sampler = sampler;

    VkWriteDescriptorSet descriptor_write;
    memset(&descriptor_write, 0, sizeof(descriptor_write));
    descriptor_write.sType = VK_STRUCTURE_TYPE_WRITE_DESCRIPTOR_SET;
    descriptor_write.dstSet = descriptorSet;
    descriptor_write.descriptorCount = 1;
    // This is a mismatched type for the layout which expects BUFFER
    descriptor_write.descriptorType = VK_DESCRIPTOR_TYPE_SAMPLER;
    descriptor_write.pImageInfo = &info;

    vkUpdateDescriptorSets(m_device->device(), 1, &descriptor_write, 0, NULL);

    m_errorMonitor->VerifyFound();

    vkDestroySampler(m_device->device(), sampler, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, DSUpdateOutOfBounds) {
    // For overlapping Update, have arrayIndex exceed that of layout
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " binding #0 with 1 total descriptors but update of 1 descriptors "
        "starting at binding offset of 0 combined with update array element "
        "offset of 1 oversteps the size of this descriptor set.");

    ASSERT_NO_FATAL_FAILURE(InitState());
    // VkDescriptorSetObj descriptorSet(m_device);
    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    // Correctly update descriptor to avoid "NOT_UPDATED" error
    VkDescriptorBufferInfo buff_info = {};
    buff_info.buffer =
        VkBuffer(0); // Don't care about buffer handle for this test
    buff_info.offset = 0;
    buff_info.range = 1024;

    VkWriteDescriptorSet descriptor_write;
    memset(&descriptor_write, 0, sizeof(descriptor_write));
    descriptor_write.sType = VK_STRUCTURE_TYPE_WRITE_DESCRIPTOR_SET;
    descriptor_write.dstSet = descriptorSet;
    descriptor_write.dstArrayElement =
        1; /* This index out of bounds for the update */
    descriptor_write.descriptorCount = 1;
    descriptor_write.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    descriptor_write.pBufferInfo = &buff_info;

    vkUpdateDescriptorSets(m_device->device(), 1, &descriptor_write, 0, NULL);

    m_errorMonitor->VerifyFound();

    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, InvalidDSUpdateIndex) {
    // Create layout w/ count of 1 and attempt update to that layout w/ binding
    // index 2
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         " does not have binding 2.");

    ASSERT_NO_FATAL_FAILURE(InitState());
    // VkDescriptorSetObj descriptorSet(m_device);
    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;
    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkSamplerCreateInfo sampler_ci = {};
    sampler_ci.sType = VK_STRUCTURE_TYPE_SAMPLER_CREATE_INFO;
    sampler_ci.pNext = NULL;
    sampler_ci.magFilter = VK_FILTER_NEAREST;
    sampler_ci.minFilter = VK_FILTER_NEAREST;
    sampler_ci.mipmapMode = VK_SAMPLER_MIPMAP_MODE_NEAREST;
    sampler_ci.addressModeU = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.addressModeV = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.addressModeW = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.mipLodBias = 1.0;
    sampler_ci.anisotropyEnable = VK_FALSE;
    sampler_ci.maxAnisotropy = 1;
    sampler_ci.compareEnable = VK_FALSE;
    sampler_ci.compareOp = VK_COMPARE_OP_NEVER;
    sampler_ci.minLod = 1.0;
    sampler_ci.maxLod = 1.0;
    sampler_ci.borderColor = VK_BORDER_COLOR_FLOAT_OPAQUE_WHITE;
    sampler_ci.unnormalizedCoordinates = VK_FALSE;

    VkSampler sampler;
    err = vkCreateSampler(m_device->device(), &sampler_ci, NULL, &sampler);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorImageInfo info = {};
    info.sampler = sampler;

    VkWriteDescriptorSet descriptor_write;
    memset(&descriptor_write, 0, sizeof(descriptor_write));
    descriptor_write.sType = VK_STRUCTURE_TYPE_WRITE_DESCRIPTOR_SET;
    descriptor_write.dstSet = descriptorSet;
    descriptor_write.dstBinding = 2;
    descriptor_write.descriptorCount = 1;
    // This is the wrong type, but out of bounds will be flagged first
    descriptor_write.descriptorType = VK_DESCRIPTOR_TYPE_SAMPLER;
    descriptor_write.pImageInfo = &info;

    vkUpdateDescriptorSets(m_device->device(), 1, &descriptor_write, 0, NULL);

    m_errorMonitor->VerifyFound();

    vkDestroySampler(m_device->device(), sampler, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, InvalidDSUpdateStruct) {
    // Call UpdateDS w/ struct type other than valid VK_STRUCTUR_TYPE_UPDATE_*
    // types
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         ".sType must be VK_STRUCTURE_TYPE_WRITE_DESCRIPTOR_SET");

    ASSERT_NO_FATAL_FAILURE(InitState());

    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);
    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkSamplerCreateInfo sampler_ci = {};
    sampler_ci.sType = VK_STRUCTURE_TYPE_SAMPLER_CREATE_INFO;
    sampler_ci.pNext = NULL;
    sampler_ci.magFilter = VK_FILTER_NEAREST;
    sampler_ci.minFilter = VK_FILTER_NEAREST;
    sampler_ci.mipmapMode = VK_SAMPLER_MIPMAP_MODE_NEAREST;
    sampler_ci.addressModeU = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.addressModeV = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.addressModeW = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.mipLodBias = 1.0;
    sampler_ci.anisotropyEnable = VK_FALSE;
    sampler_ci.maxAnisotropy = 1;
    sampler_ci.compareEnable = VK_FALSE;
    sampler_ci.compareOp = VK_COMPARE_OP_NEVER;
    sampler_ci.minLod = 1.0;
    sampler_ci.maxLod = 1.0;
    sampler_ci.borderColor = VK_BORDER_COLOR_FLOAT_OPAQUE_WHITE;
    sampler_ci.unnormalizedCoordinates = VK_FALSE;
    VkSampler sampler;
    err = vkCreateSampler(m_device->device(), &sampler_ci, NULL, &sampler);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorImageInfo info = {};
    info.sampler = sampler;

    VkWriteDescriptorSet descriptor_write;
    memset(&descriptor_write, 0, sizeof(descriptor_write));
    descriptor_write.sType =
        (VkStructureType)0x99999999; /* Intentionally broken struct type */
    descriptor_write.dstSet = descriptorSet;
    descriptor_write.descriptorCount = 1;
    // This is the wrong type, but out of bounds will be flagged first
    descriptor_write.descriptorType = VK_DESCRIPTOR_TYPE_SAMPLER;
    descriptor_write.pImageInfo = &info;

    vkUpdateDescriptorSets(m_device->device(), 1, &descriptor_write, 0, NULL);

    m_errorMonitor->VerifyFound();

    vkDestroySampler(m_device->device(), sampler, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, SampleDescriptorUpdateError) {
    // Create a single Sampler descriptor and send it an invalid Sampler
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Attempted write update to sampler descriptor with invalid sampler");

    ASSERT_NO_FATAL_FAILURE(InitState());
    // TODO : Farm Descriptor setup code to helper function(s) to reduce copied
    // code
    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_SAMPLER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_SAMPLER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;
    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkSampler sampler =
        (VkSampler)((size_t)0xbaadbeef); // Sampler with invalid handle

    VkDescriptorImageInfo descriptor_info;
    memset(&descriptor_info, 0, sizeof(VkDescriptorImageInfo));
    descriptor_info.sampler = sampler;

    VkWriteDescriptorSet descriptor_write;
    memset(&descriptor_write, 0, sizeof(descriptor_write));
    descriptor_write.sType = VK_STRUCTURE_TYPE_WRITE_DESCRIPTOR_SET;
    descriptor_write.dstSet = descriptorSet;
    descriptor_write.dstBinding = 0;
    descriptor_write.descriptorCount = 1;
    descriptor_write.descriptorType = VK_DESCRIPTOR_TYPE_SAMPLER;
    descriptor_write.pImageInfo = &descriptor_info;

    vkUpdateDescriptorSets(m_device->device(), 1, &descriptor_write, 0, NULL);

    m_errorMonitor->VerifyFound();

    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, ImageViewDescriptorUpdateError) {
    // Create a single combined Image/Sampler descriptor and send it an invalid
    // imageView
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Attempted write update to combined "
                                         "image sampler descriptor failed due "
                                         "to: Invalid VkImageView:");

    ASSERT_NO_FATAL_FAILURE(InitState());
    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;
    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkSamplerCreateInfo sampler_ci = {};
    sampler_ci.sType = VK_STRUCTURE_TYPE_SAMPLER_CREATE_INFO;
    sampler_ci.pNext = NULL;
    sampler_ci.magFilter = VK_FILTER_NEAREST;
    sampler_ci.minFilter = VK_FILTER_NEAREST;
    sampler_ci.mipmapMode = VK_SAMPLER_MIPMAP_MODE_NEAREST;
    sampler_ci.addressModeU = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.addressModeV = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.addressModeW = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.mipLodBias = 1.0;
    sampler_ci.anisotropyEnable = VK_FALSE;
    sampler_ci.maxAnisotropy = 1;
    sampler_ci.compareEnable = VK_FALSE;
    sampler_ci.compareOp = VK_COMPARE_OP_NEVER;
    sampler_ci.minLod = 1.0;
    sampler_ci.maxLod = 1.0;
    sampler_ci.borderColor = VK_BORDER_COLOR_FLOAT_OPAQUE_WHITE;
    sampler_ci.unnormalizedCoordinates = VK_FALSE;

    VkSampler sampler;
    err = vkCreateSampler(m_device->device(), &sampler_ci, NULL, &sampler);
    ASSERT_VK_SUCCESS(err);

    VkImageView view =
        (VkImageView)((size_t)0xbaadbeef); // invalid imageView object

    VkDescriptorImageInfo descriptor_info;
    memset(&descriptor_info, 0, sizeof(VkDescriptorImageInfo));
    descriptor_info.sampler = sampler;
    descriptor_info.imageView = view;

    VkWriteDescriptorSet descriptor_write;
    memset(&descriptor_write, 0, sizeof(descriptor_write));
    descriptor_write.sType = VK_STRUCTURE_TYPE_WRITE_DESCRIPTOR_SET;
    descriptor_write.dstSet = descriptorSet;
    descriptor_write.dstBinding = 0;
    descriptor_write.descriptorCount = 1;
    descriptor_write.descriptorType = VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER;
    descriptor_write.pImageInfo = &descriptor_info;

    vkUpdateDescriptorSets(m_device->device(), 1, &descriptor_write, 0, NULL);

    m_errorMonitor->VerifyFound();

    vkDestroySampler(m_device->device(), sampler, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, CopyDescriptorUpdateErrors) {
    // Create DS w/ layout of 2 types, write update 1 and attempt to copy-update
    // into the other
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         " binding #1 with type "
                                         "VK_DESCRIPTOR_TYPE_SAMPLER. Types do "
                                         "not match.");

    ASSERT_NO_FATAL_FAILURE(InitState());
    // VkDescriptorSetObj descriptorSet(m_device);
    VkDescriptorPoolSize ds_type_count[2] = {};
    ds_type_count[0].type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count[0].descriptorCount = 1;
    ds_type_count[1].type = VK_DESCRIPTOR_TYPE_SAMPLER;
    ds_type_count[1].descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 2;
    ds_pool_ci.pPoolSizes = ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);
    VkDescriptorSetLayoutBinding dsl_binding[2] = {};
    dsl_binding[0].binding = 0;
    dsl_binding[0].descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding[0].descriptorCount = 1;
    dsl_binding[0].stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding[0].pImmutableSamplers = NULL;
    dsl_binding[1].binding = 1;
    dsl_binding[1].descriptorType = VK_DESCRIPTOR_TYPE_SAMPLER;
    dsl_binding[1].descriptorCount = 1;
    dsl_binding[1].stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding[1].pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 2;
    ds_layout_ci.pBindings = dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkSamplerCreateInfo sampler_ci = {};
    sampler_ci.sType = VK_STRUCTURE_TYPE_SAMPLER_CREATE_INFO;
    sampler_ci.pNext = NULL;
    sampler_ci.magFilter = VK_FILTER_NEAREST;
    sampler_ci.minFilter = VK_FILTER_NEAREST;
    sampler_ci.mipmapMode = VK_SAMPLER_MIPMAP_MODE_NEAREST;
    sampler_ci.addressModeU = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.addressModeV = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.addressModeW = VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE;
    sampler_ci.mipLodBias = 1.0;
    sampler_ci.anisotropyEnable = VK_FALSE;
    sampler_ci.maxAnisotropy = 1;
    sampler_ci.compareEnable = VK_FALSE;
    sampler_ci.compareOp = VK_COMPARE_OP_NEVER;
    sampler_ci.minLod = 1.0;
    sampler_ci.maxLod = 1.0;
    sampler_ci.borderColor = VK_BORDER_COLOR_FLOAT_OPAQUE_WHITE;
    sampler_ci.unnormalizedCoordinates = VK_FALSE;

    VkSampler sampler;
    err = vkCreateSampler(m_device->device(), &sampler_ci, NULL, &sampler);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorImageInfo info = {};
    info.sampler = sampler;

    VkWriteDescriptorSet descriptor_write;
    memset(&descriptor_write, 0, sizeof(VkWriteDescriptorSet));
    descriptor_write.sType = VK_STRUCTURE_TYPE_WRITE_DESCRIPTOR_SET;
    descriptor_write.dstSet = descriptorSet;
    descriptor_write.dstBinding = 1; // SAMPLER binding from layout above
    descriptor_write.descriptorCount = 1;
    descriptor_write.descriptorType = VK_DESCRIPTOR_TYPE_SAMPLER;
    descriptor_write.pImageInfo = &info;
    // This write update should succeed
    vkUpdateDescriptorSets(m_device->device(), 1, &descriptor_write, 0, NULL);
    // Now perform a copy update that fails due to type mismatch
    VkCopyDescriptorSet copy_ds_update;
    memset(&copy_ds_update, 0, sizeof(VkCopyDescriptorSet));
    copy_ds_update.sType = VK_STRUCTURE_TYPE_COPY_DESCRIPTOR_SET;
    copy_ds_update.srcSet = descriptorSet;
    copy_ds_update.srcBinding = 1; // Copy from SAMPLER binding
    copy_ds_update.dstSet = descriptorSet;
    copy_ds_update.dstBinding = 0;      // ERROR : copy to UNIFORM binding
    copy_ds_update.descriptorCount = 1; // copy 1 descriptor
    vkUpdateDescriptorSets(m_device->device(), 0, NULL, 1, &copy_ds_update);

    m_errorMonitor->VerifyFound();
    // Now perform a copy update that fails due to binding out of bounds
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        " does not have copy update src binding of 3.");
    memset(&copy_ds_update, 0, sizeof(VkCopyDescriptorSet));
    copy_ds_update.sType = VK_STRUCTURE_TYPE_COPY_DESCRIPTOR_SET;
    copy_ds_update.srcSet = descriptorSet;
    copy_ds_update.srcBinding =
        3; // ERROR : Invalid binding for matching layout
    copy_ds_update.dstSet = descriptorSet;
    copy_ds_update.dstBinding = 0;
    copy_ds_update.descriptorCount = 1; // Copy 1 descriptor
    vkUpdateDescriptorSets(m_device->device(), 0, NULL, 1, &copy_ds_update);

    m_errorMonitor->VerifyFound();

    // Now perform a copy update that fails due to binding out of bounds
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT, " binding#1 with offset index of 1 plus "
                                       "update array offset of 0 and update of "
                                       "5 descriptors oversteps total number "
                                       "of descriptors in set: 2.");

    memset(&copy_ds_update, 0, sizeof(VkCopyDescriptorSet));
    copy_ds_update.sType = VK_STRUCTURE_TYPE_COPY_DESCRIPTOR_SET;
    copy_ds_update.srcSet = descriptorSet;
    copy_ds_update.srcBinding = 1;
    copy_ds_update.dstSet = descriptorSet;
    copy_ds_update.dstBinding = 0;
    copy_ds_update.descriptorCount =
        5; // ERROR copy 5 descriptors (out of bounds for layout)
    vkUpdateDescriptorSets(m_device->device(), 0, NULL, 1, &copy_ds_update);

    m_errorMonitor->VerifyFound();

    vkDestroySampler(m_device->device(), sampler, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, NumSamplesMismatch) {
    // Create CommandBuffer where MSAA samples doesn't match RenderPass
    // sampleCount
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Num samples mismatch! ");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());
    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineMultisampleStateCreateInfo pipe_ms_state_ci = {};
    pipe_ms_state_ci.sType =
        VK_STRUCTURE_TYPE_PIPELINE_MULTISAMPLE_STATE_CREATE_INFO;
    pipe_ms_state_ci.pNext = NULL;
    pipe_ms_state_ci.rasterizationSamples = VK_SAMPLE_COUNT_4_BIT;
    pipe_ms_state_ci.sampleShadingEnable = 0;
    pipe_ms_state_ci.minSampleShading = 1.0;
    pipe_ms_state_ci.pSampleMask = NULL;

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.pNext = NULL;
    pipeline_layout_ci.setLayoutCount = 1;
    pipeline_layout_ci.pSetLayouts = &ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    VkShaderObj vs(m_device, bindStateVertShaderText,
                   VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, bindStateFragShaderText,
                   VK_SHADER_STAGE_FRAGMENT_BIT,
                   this); // We shouldn't need a fragment shader
                          // but add it to be able to run on more devices
    VkPipelineObj pipe(m_device);
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);
    pipe.AddColorAttachment();
    pipe.SetMSAA(&pipe_ms_state_ci);
    pipe.CreateVKPipeline(pipeline_layout, renderPass());

    BeginCommandBuffer();
    vkCmdBindPipeline(m_commandBuffer->GetBufferHandle(),
                      VK_PIPELINE_BIND_POINT_GRAPHICS, pipe.handle());

    // Render triangle (the error should trigger on the attempt to draw).
    Draw(3, 1, 0, 0);

    // Finalize recording of the command buffer
    EndCommandBuffer();

    m_errorMonitor->VerifyFound();

    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, NumBlendAttachMismatch) {
    // Create Pipeline where the number of blend attachments doesn't match the
    // number of color attachments.  In this case, we don't add any color
    // blend attachments even though we have a color attachment.
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Render pass subpass 0 mismatch with blending state defined and blend state attachment");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());
    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
        &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
        &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineMultisampleStateCreateInfo pipe_ms_state_ci = {};
    pipe_ms_state_ci.sType =
        VK_STRUCTURE_TYPE_PIPELINE_MULTISAMPLE_STATE_CREATE_INFO;
    pipe_ms_state_ci.pNext = NULL;
    pipe_ms_state_ci.rasterizationSamples = VK_SAMPLE_COUNT_1_BIT;
    pipe_ms_state_ci.sampleShadingEnable = 0;
    pipe_ms_state_ci.minSampleShading = 1.0;
    pipe_ms_state_ci.pSampleMask = NULL;

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.pNext = NULL;
    pipeline_layout_ci.setLayoutCount = 1;
    pipeline_layout_ci.pSetLayouts = &ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
        &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    VkShaderObj vs(m_device, bindStateVertShaderText,
        VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, bindStateFragShaderText,
        VK_SHADER_STAGE_FRAGMENT_BIT,
        this); // We shouldn't need a fragment shader
               // but add it to be able to run on more devices
    VkPipelineObj pipe(m_device);
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);
    pipe.SetMSAA(&pipe_ms_state_ci);
    pipe.CreateVKPipeline(pipeline_layout, renderPass());

    BeginCommandBuffer();
    vkCmdBindPipeline(m_commandBuffer->GetBufferHandle(),
        VK_PIPELINE_BIND_POINT_GRAPHICS, pipe.handle());

    // Render triangle (the error should trigger on the attempt to draw).
    Draw(3, 1, 0, 0);

    // Finalize recording of the command buffer
    EndCommandBuffer();

    m_errorMonitor->VerifyFound();

    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, MissingClearAttachment) {
    TEST_DESCRIPTION("Points to a wrong colorAttachment index in a VkClearAttachment "
                     "structure passed to vkCmdClearAttachments");
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "vkCmdClearAttachments() attachment index 1 not found in attachment "
                                         "reference array of active subpass 0");

    VKTriangleTest(bindStateVertShaderText, bindStateFragShaderText, BsoFailCmdClearAttachments);
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, ClearCmdNoDraw) {
    // Create CommandBuffer where we add ClearCmd for FB Color attachment prior
    // to issuing a Draw
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_PERFORMANCE_WARNING_BIT_EXT,
        "vkCmdClearAttachments() issued on CB object ");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineMultisampleStateCreateInfo pipe_ms_state_ci = {};
    pipe_ms_state_ci.sType =
        VK_STRUCTURE_TYPE_PIPELINE_MULTISAMPLE_STATE_CREATE_INFO;
    pipe_ms_state_ci.pNext = NULL;
    pipe_ms_state_ci.rasterizationSamples = VK_SAMPLE_COUNT_4_BIT;
    pipe_ms_state_ci.sampleShadingEnable = 0;
    pipe_ms_state_ci.minSampleShading = 1.0;
    pipe_ms_state_ci.pSampleMask = NULL;

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.pNext = NULL;
    pipeline_layout_ci.setLayoutCount = 1;
    pipeline_layout_ci.pSetLayouts = &ds_layout;

    VkPipelineLayout pipeline_layout;
    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    VkShaderObj vs(m_device, bindStateVertShaderText,
                   VK_SHADER_STAGE_VERTEX_BIT, this);
    //  We shouldn't need a fragment shader but add it to be able to run
    //  on more devices
    VkShaderObj fs(m_device, bindStateFragShaderText,
                   VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);
    pipe.SetMSAA(&pipe_ms_state_ci);
    pipe.CreateVKPipeline(pipeline_layout, renderPass());

    BeginCommandBuffer();

    // Main thing we care about for this test is that the VkImage obj we're
    // clearing matches Color Attachment of FB
    //  Also pass down other dummy params to keep driver and paramchecker happy
    VkClearAttachment color_attachment;
    color_attachment.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    color_attachment.clearValue.color.float32[0] = 1.0;
    color_attachment.clearValue.color.float32[1] = 1.0;
    color_attachment.clearValue.color.float32[2] = 1.0;
    color_attachment.clearValue.color.float32[3] = 1.0;
    color_attachment.colorAttachment = 0;
    VkClearRect clear_rect = {
        {{0, 0}, {(uint32_t)m_width, (uint32_t)m_height}}};

    vkCmdClearAttachments(m_commandBuffer->GetBufferHandle(), 1,
                          &color_attachment, 1, &clear_rect);

    m_errorMonitor->VerifyFound();

    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, VtxBufferBadIndex) {
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_PERFORMANCE_WARNING_BIT_EXT,
        "but no vertex buffers are attached to this Pipeline State Object");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitViewport());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;

    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkPipelineMultisampleStateCreateInfo pipe_ms_state_ci = {};
    pipe_ms_state_ci.sType =
        VK_STRUCTURE_TYPE_PIPELINE_MULTISAMPLE_STATE_CREATE_INFO;
    pipe_ms_state_ci.pNext = NULL;
    pipe_ms_state_ci.rasterizationSamples = VK_SAMPLE_COUNT_1_BIT;
    pipe_ms_state_ci.sampleShadingEnable = 0;
    pipe_ms_state_ci.minSampleShading = 1.0;
    pipe_ms_state_ci.pSampleMask = NULL;

    VkPipelineLayoutCreateInfo pipeline_layout_ci = {};
    pipeline_layout_ci.sType = VK_STRUCTURE_TYPE_PIPELINE_LAYOUT_CREATE_INFO;
    pipeline_layout_ci.pNext = NULL;
    pipeline_layout_ci.setLayoutCount = 1;
    pipeline_layout_ci.pSetLayouts = &ds_layout;
    VkPipelineLayout pipeline_layout;

    err = vkCreatePipelineLayout(m_device->device(), &pipeline_layout_ci, NULL,
                                 &pipeline_layout);
    ASSERT_VK_SUCCESS(err);

    VkShaderObj vs(m_device, bindStateVertShaderText,
                   VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, bindStateFragShaderText,
                   VK_SHADER_STAGE_FRAGMENT_BIT,
                   this); // We shouldn't need a fragment shader
                          // but add it to be able to run on more devices
    VkPipelineObj pipe(m_device);
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);
    pipe.AddColorAttachment();
    pipe.SetMSAA(&pipe_ms_state_ci);
    pipe.SetViewport(m_viewports);
    pipe.SetScissor(m_scissors);
    pipe.CreateVKPipeline(pipeline_layout, renderPass());

    BeginCommandBuffer();
    vkCmdBindPipeline(m_commandBuffer->GetBufferHandle(),
                      VK_PIPELINE_BIND_POINT_GRAPHICS, pipe.handle());
    // Don't care about actual data, just need to get to draw to flag error
    static const float vbo_data[3] = {1.f, 0.f, 1.f};
    VkConstantBufferObj vbo(m_device, sizeof(vbo_data), sizeof(float),
                            (const void *)&vbo_data);
    BindVertexBuffer(&vbo, (VkDeviceSize)0, 1); // VBO idx 1, but no VBO in PSO
    Draw(1, 0, 0, 0);

    m_errorMonitor->VerifyFound();

    vkDestroyPipelineLayout(m_device->device(), pipeline_layout, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}
// INVALID_IMAGE_LAYOUT tests (one other case is hit by MapMemWithoutHostVisibleBit and not here)
TEST_F(VkLayerTest, InvalidImageLayout) {
    TEST_DESCRIPTION("Hit all possible validation checks associated with the "
            "DRAWSTATE_INVALID_IMAGE_LAYOUT enum. Generally these involve having"
            "images in the wrong layout when they're copied or transitioned.");
    // 3 in ValidateCmdBufImageLayouts
    // *  -1 Attempt to submit cmd buf w/ deleted image
    // *  -2 Cmd buf submit of image w/ layout not matching first use w/ subresource
    // *  -3 Cmd buf submit of image w/ layout not matching first use w/o subresource
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_PERFORMANCE_WARNING_BIT_EXT,
        "Layout for input image should be TRANSFER_SRC_OPTIMAL instead of GENERAL.");

    ASSERT_NO_FATAL_FAILURE(InitState());
    // Create src & dst images to use for copy operations
    VkImage src_image;
    VkImage dst_image;

    const VkFormat tex_format = VK_FORMAT_B8G8R8A8_UNORM;
    const int32_t tex_width = 32;
    const int32_t tex_height = 32;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = tex_format;
    image_create_info.extent.width = tex_width;
    image_create_info.extent.height = tex_height;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 4;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_OPTIMAL;
    image_create_info.usage = VK_IMAGE_USAGE_TRANSFER_SRC_BIT;
    image_create_info.flags = 0;

    VkResult err = vkCreateImage(m_device->device(), &image_create_info, NULL, &src_image);
    ASSERT_VK_SUCCESS(err);
    err = vkCreateImage(m_device->device(), &image_create_info, NULL, &dst_image);
    ASSERT_VK_SUCCESS(err);

    BeginCommandBuffer();
    VkImageCopy copyRegion;
    copyRegion.srcSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    copyRegion.srcSubresource.mipLevel = 0;
    copyRegion.srcSubresource.baseArrayLayer = 0;
    copyRegion.srcSubresource.layerCount = 1;
    copyRegion.srcOffset.x = 0;
    copyRegion.srcOffset.y = 0;
    copyRegion.srcOffset.z = 0;
    copyRegion.dstSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    copyRegion.dstSubresource.mipLevel = 0;
    copyRegion.dstSubresource.baseArrayLayer = 0;
    copyRegion.dstSubresource.layerCount = 1;
    copyRegion.dstOffset.x = 0;
    copyRegion.dstOffset.y = 0;
    copyRegion.dstOffset.z = 0;
    copyRegion.extent.width = 1;
    copyRegion.extent.height = 1;
    copyRegion.extent.depth = 1;
    m_commandBuffer->CopyImage(src_image, VK_IMAGE_LAYOUT_GENERAL, dst_image, VK_IMAGE_LAYOUT_GENERAL, 1, &copyRegion);
    m_errorMonitor->VerifyFound();
    // Now cause error due to src image layout changing
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Cannot copy from an image whose source layout is VK_IMAGE_LAYOUT_UNDEFINED and doesn't match the current layout VK_IMAGE_LAYOUT_GENERAL.");
    m_commandBuffer->CopyImage(src_image, VK_IMAGE_LAYOUT_UNDEFINED, dst_image, VK_IMAGE_LAYOUT_GENERAL, 1, &copyRegion);
    m_errorMonitor->VerifyFound();
    // Final src error is due to bad layout type
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Layout for input image is VK_IMAGE_LAYOUT_UNDEFINED but can only be TRANSFER_SRC_OPTIMAL or GENERAL.");
    m_commandBuffer->CopyImage(src_image, VK_IMAGE_LAYOUT_UNDEFINED, dst_image, VK_IMAGE_LAYOUT_GENERAL, 1, &copyRegion);
    m_errorMonitor->VerifyFound();
    // Now verify same checks for dst
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_PERFORMANCE_WARNING_BIT_EXT,
        "Layout for output image should be TRANSFER_DST_OPTIMAL instead of GENERAL.");
    m_commandBuffer->CopyImage(src_image, VK_IMAGE_LAYOUT_GENERAL, dst_image, VK_IMAGE_LAYOUT_GENERAL, 1, &copyRegion);
    m_errorMonitor->VerifyFound();
    // Now cause error due to src image layout changing
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Cannot copy from an image whose dest layout is VK_IMAGE_LAYOUT_UNDEFINED and doesn't match the current layout VK_IMAGE_LAYOUT_GENERAL.");
    m_commandBuffer->CopyImage(src_image, VK_IMAGE_LAYOUT_GENERAL, dst_image, VK_IMAGE_LAYOUT_UNDEFINED, 1, &copyRegion);
    m_errorMonitor->VerifyFound();
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Layout for output image is VK_IMAGE_LAYOUT_UNDEFINED but can only be TRANSFER_DST_OPTIMAL or GENERAL.");
    m_commandBuffer->CopyImage(src_image, VK_IMAGE_LAYOUT_GENERAL, dst_image, VK_IMAGE_LAYOUT_UNDEFINED, 1, &copyRegion);
    m_errorMonitor->VerifyFound();
    // Now cause error due to bad image layout transition in PipelineBarrier
    VkImageMemoryBarrier image_barrier[1] = {};
    image_barrier[0].oldLayout = VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL;
    image_barrier[0].image = src_image;
    image_barrier[0].subresourceRange.layerCount = 2;
    image_barrier[0].subresourceRange.levelCount = 2;
    image_barrier[0].subresourceRange.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "You cannot transition the layout from VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL when current layout is VK_IMAGE_LAYOUT_GENERAL.");
    vkCmdPipelineBarrier(m_commandBuffer->handle(), VK_PIPELINE_STAGE_ALL_COMMANDS_BIT, VK_PIPELINE_STAGE_ALL_COMMANDS_BIT, 0, 0, NULL, 0, NULL, 1, image_barrier);
    m_errorMonitor->VerifyFound();

    // Finally some layout errors at RenderPass create time
    // Just hacking in specific state to get to the errors we want so don't copy this unless you know what you're doing.
    VkAttachmentReference attach = {};
    // perf warning for GENERAL layout w/ non-DS input attachment
    attach.layout = VK_IMAGE_LAYOUT_GENERAL;
    VkSubpassDescription subpass = {};
    subpass.inputAttachmentCount = 1;
    subpass.pInputAttachments = &attach;
    VkRenderPassCreateInfo rpci = {};
    rpci.subpassCount = 1;
    rpci.pSubpasses = &subpass;
    rpci.attachmentCount = 1;
    VkAttachmentDescription attach_desc = {};
    attach_desc.format = VK_FORMAT_UNDEFINED;
    rpci.pAttachments = &attach_desc;
    rpci.sType = VK_STRUCTURE_TYPE_RENDER_PASS_CREATE_INFO;
    VkRenderPass rp;
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_PERFORMANCE_WARNING_BIT_EXT,
        "Layout for input attachment is GENERAL but should be READ_ONLY_OPTIMAL.");
    vkCreateRenderPass(m_device->device(), &rpci, NULL, &rp);
    m_errorMonitor->VerifyFound();
    // error w/ non-general layout
    attach.layout = VK_IMAGE_LAYOUT_TRANSFER_SRC_OPTIMAL;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Layout for input attachment is VK_IMAGE_LAYOUT_TRANSFER_SRC_OPTIMAL but can only be READ_ONLY_OPTIMAL or GENERAL.");
    vkCreateRenderPass(m_device->device(), &rpci, NULL, &rp);
    m_errorMonitor->VerifyFound();
    subpass.inputAttachmentCount = 0;
    subpass.colorAttachmentCount = 1;
    subpass.pColorAttachments = &attach;
    attach.layout = VK_IMAGE_LAYOUT_GENERAL;
    // perf warning for GENERAL layout on color attachment
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_PERFORMANCE_WARNING_BIT_EXT,
        "Layout for color attachment is GENERAL but should be COLOR_ATTACHMENT_OPTIMAL.");
    vkCreateRenderPass(m_device->device(), &rpci, NULL, &rp);
    m_errorMonitor->VerifyFound();
    // error w/ non-color opt or GENERAL layout for color attachment
    attach.layout = VK_IMAGE_LAYOUT_TRANSFER_SRC_OPTIMAL;
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Layout for color attachment is VK_IMAGE_LAYOUT_TRANSFER_SRC_OPTIMAL but can only be COLOR_ATTACHMENT_OPTIMAL or GENERAL.");
    vkCreateRenderPass(m_device->device(), &rpci, NULL, &rp);
    m_errorMonitor->VerifyFound();
    subpass.colorAttachmentCount = 0;
    subpass.pDepthStencilAttachment = &attach;
    attach.layout = VK_IMAGE_LAYOUT_GENERAL;
    // perf warning for GENERAL layout on DS attachment
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_PERFORMANCE_WARNING_BIT_EXT,
        "Layout for depth attachment is GENERAL but should be DEPTH_STENCIL_ATTACHMENT_OPTIMAL.");
    vkCreateRenderPass(m_device->device(), &rpci, NULL, &rp);
    m_errorMonitor->VerifyFound();
    // error w/ non-ds opt or GENERAL layout for color attachment
    attach.layout = VK_IMAGE_LAYOUT_TRANSFER_SRC_OPTIMAL;
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Layout for depth attachment is VK_IMAGE_LAYOUT_TRANSFER_SRC_OPTIMAL but can only be DEPTH_STENCIL_ATTACHMENT_OPTIMAL or GENERAL.");
    vkCreateRenderPass(m_device->device(), &rpci, NULL, &rp);
    m_errorMonitor->VerifyFound();
    // For this error we need a valid renderpass so create default one
    attach.layout = VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL;
    attach.attachment = 0;
    attach_desc.format = VK_FORMAT_D24_UNORM_S8_UINT;
    attach_desc.samples = VK_SAMPLE_COUNT_1_BIT;
    attach_desc.storeOp = VK_ATTACHMENT_STORE_OP_STORE;
    attach_desc.stencilLoadOp = VK_ATTACHMENT_LOAD_OP_DONT_CARE;
    attach_desc.stencilStoreOp = VK_ATTACHMENT_STORE_OP_DONT_CARE;
    // Can't do a CLEAR load on READ_ONLY initialLayout
    attach_desc.loadOp = VK_ATTACHMENT_LOAD_OP_CLEAR;
    attach_desc.initialLayout = VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL;
    attach_desc.finalLayout = VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL;
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         " with invalid first layout "
                                         "VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_"
                                         "ONLY_OPTIMAL");
    vkCreateRenderPass(m_device->device(), &rpci, NULL, &rp);
    m_errorMonitor->VerifyFound();

    vkDestroyImage(m_device->device(), src_image, NULL);
    vkDestroyImage(m_device->device(), dst_image, NULL);
}
#endif // DRAW_STATE_TESTS

#if THREADING_TESTS
#if GTEST_IS_THREADSAFE
struct thread_data_struct {
    VkCommandBuffer commandBuffer;
    VkEvent event;
    bool bailout;
};

extern "C" void *AddToCommandBuffer(void *arg) {
    struct thread_data_struct *data = (struct thread_data_struct *)arg;

    for (int i = 0; i < 10000; i++) {
        vkCmdSetEvent(data->commandBuffer, data->event,
                      VK_PIPELINE_STAGE_ALL_COMMANDS_BIT);
        if (data->bailout) {
            break;
        }
    }
    return NULL;
}

TEST_F(VkLayerTest, ThreadCommandBufferCollision) {
    test_platform_thread thread;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "THREADING ERROR");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitViewport());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    // Calls AllocateCommandBuffers
    VkCommandBufferObj commandBuffer(m_device, m_commandPool);

    // Avoid creating RenderPass
    commandBuffer.BeginCommandBuffer();

    VkEventCreateInfo event_info;
    VkEvent event;
    VkResult err;

    memset(&event_info, 0, sizeof(event_info));
    event_info.sType = VK_STRUCTURE_TYPE_EVENT_CREATE_INFO;

    err = vkCreateEvent(device(), &event_info, NULL, &event);
    ASSERT_VK_SUCCESS(err);

    err = vkResetEvent(device(), event);
    ASSERT_VK_SUCCESS(err);

    struct thread_data_struct data;
    data.commandBuffer = commandBuffer.GetBufferHandle();
    data.event = event;
    data.bailout = false;
    m_errorMonitor->SetBailout(&data.bailout);
    // Add many entries to command buffer from another thread.
    test_platform_thread_create(&thread, AddToCommandBuffer, (void *)&data);
    // Add many entries to command buffer from this thread at the same time.
    AddToCommandBuffer(&data);

    test_platform_thread_join(thread, NULL);
    commandBuffer.EndCommandBuffer();

    m_errorMonitor->SetBailout(NULL);

    m_errorMonitor->VerifyFound();

    vkDestroyEvent(device(), event, NULL);
}
#endif // GTEST_IS_THREADSAFE
#endif // THREADING_TESTS

#if SHADER_CHECKER_TESTS
TEST_F(VkLayerTest, InvalidSPIRVCodeSize) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Invalid SPIR-V header");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkShaderModule module;
    VkShaderModuleCreateInfo moduleCreateInfo;
    struct icd_spv_header spv;

    spv.magic = ICD_SPV_MAGIC;
    spv.version = ICD_SPV_VERSION;
    spv.gen_magic = 0;

    moduleCreateInfo.sType = VK_STRUCTURE_TYPE_SHADER_MODULE_CREATE_INFO;
    moduleCreateInfo.pNext = NULL;
    moduleCreateInfo.pCode = (const uint32_t *)&spv;
    moduleCreateInfo.codeSize = 4;
    moduleCreateInfo.flags = 0;
    vkCreateShaderModule(m_device->device(), &moduleCreateInfo, NULL, &module);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, InvalidSPIRVMagic) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Invalid SPIR-V magic number");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkShaderModule module;
    VkShaderModuleCreateInfo moduleCreateInfo;
    struct icd_spv_header spv;

    spv.magic = ~ICD_SPV_MAGIC;
    spv.version = ICD_SPV_VERSION;
    spv.gen_magic = 0;

    moduleCreateInfo.sType = VK_STRUCTURE_TYPE_SHADER_MODULE_CREATE_INFO;
    moduleCreateInfo.pNext = NULL;
    moduleCreateInfo.pCode = (const uint32_t *)&spv;
    moduleCreateInfo.codeSize = sizeof(spv) + 10;
    moduleCreateInfo.flags = 0;
    vkCreateShaderModule(m_device->device(), &moduleCreateInfo, NULL, &module);

    m_errorMonitor->VerifyFound();
}

#if 0
// Not currently covered by SPIRV-Tools validator
TEST_F(VkLayerTest, InvalidSPIRVVersion) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Invalid SPIR-V header");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkShaderModule module;
    VkShaderModuleCreateInfo moduleCreateInfo;
    struct icd_spv_header spv;

    spv.magic = ICD_SPV_MAGIC;
    spv.version = ~ICD_SPV_VERSION;
    spv.gen_magic = 0;

    moduleCreateInfo.sType = VK_STRUCTURE_TYPE_SHADER_MODULE_CREATE_INFO;
    moduleCreateInfo.pNext = NULL;

    moduleCreateInfo.pCode = (const uint32_t *)&spv;
    moduleCreateInfo.codeSize = sizeof(spv) + 10;
    moduleCreateInfo.flags = 0;
    vkCreateShaderModule(m_device->device(), &moduleCreateInfo, NULL, &module);

    m_errorMonitor->VerifyFound();
}
#endif

TEST_F(VkLayerTest, CreatePipelineVertexOutputNotConsumed) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_PERFORMANCE_WARNING_BIT_EXT,
                                         "not consumed by fragment shader");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    char const *vsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out float x;\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(1);\n"
        "   x = 0;\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineFragmentInputNotProvided) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "not written by vertex shader");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    char const *vsSource =
        "#version 450\n"
        "\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(1);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) in float x;\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(x);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineFragmentInputNotProvidedInBlock) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "not written by vertex shader");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    char const *vsSource =
        "#version 450\n"
        "\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(1);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "in block { layout(location=0) float x; } ins;\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(ins.x);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineVsFsTypeMismatchArraySize) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Type mismatch on location 0.0: 'ptr to "
                                         "output arr[2] of float32' vs 'ptr to "
                                         "input arr[3] of float32'");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    char const *vsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out float x[2];\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   x[0] = 0; x[1] = 0;\n"
        "   gl_Position = vec4(1);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) in float x[3];\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(x[0] + x[1] + x[2]);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineVsFsTypeMismatch) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Type mismatch on location 0");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    char const *vsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out int x;\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   x = 0;\n"
        "   gl_Position = vec4(1);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) in float x;\n" /* VS writes int */
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(x);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineVsFsTypeMismatchInBlock) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Type mismatch on location 0");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    char const *vsSource =
        "#version 450\n"
        "\n"
        "out block { layout(location=0) int x; } outs;\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   outs.x = 0;\n"
        "   gl_Position = vec4(1);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "in block { layout(location=0) float x; } ins;\n" /* VS writes int */
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(ins.x);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineVsFsMismatchByLocation) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "location 0.0 which is not written by vertex shader");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    char const *vsSource =
        "#version 450\n"
        "\n"
        "out block { layout(location=1) float x; } outs;\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   outs.x = 0;\n"
        "   gl_Position = vec4(1);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "in block { layout(location=0) float x; } ins;\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(ins.x);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineVsFsMismatchByComponent) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "location 0.1 which is not written by vertex shader");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    char const *vsSource =
        "#version 450\n"
        "\n"
        "out block { layout(location=0, component=0) float x; } outs;\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   outs.x = 0;\n"
        "   gl_Position = vec4(1);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "in block { layout(location=0, component=1) float x; } ins;\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(ins.x);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineAttribNotConsumed) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_PERFORMANCE_WARNING_BIT_EXT,
                                         "location 0 not consumed by VS");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkVertexInputBindingDescription input_binding;
    memset(&input_binding, 0, sizeof(input_binding));

    VkVertexInputAttributeDescription input_attrib;
    memset(&input_attrib, 0, sizeof(input_attrib));
    input_attrib.format = VK_FORMAT_R32_SFLOAT;

    char const *vsSource =
        "#version 450\n"
        "\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(1);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    pipe.AddVertexInputBindings(&input_binding, 1);
    pipe.AddVertexInputAttribs(&input_attrib, 1);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineAttribLocationMismatch) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_PERFORMANCE_WARNING_BIT_EXT,
                                         "location 0 not consumed by VS");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkVertexInputBindingDescription input_binding;
    memset(&input_binding, 0, sizeof(input_binding));

    VkVertexInputAttributeDescription input_attrib;
    memset(&input_attrib, 0, sizeof(input_attrib));
    input_attrib.format = VK_FORMAT_R32_SFLOAT;

    char const *vsSource =
        "#version 450\n"
        "\n"
        "layout(location=1) in float x;\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(x);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    pipe.AddVertexInputBindings(&input_binding, 1);
    pipe.AddVertexInputAttribs(&input_attrib, 1);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineAttribNotProvided) {
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "VS consumes input at location 0 but not provided");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    char const *vsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) in vec4 x;\n" /* not provided */
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = x;\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineAttribTypeMismatch) {
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "location 0 does not match VS input type");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkVertexInputBindingDescription input_binding;
    memset(&input_binding, 0, sizeof(input_binding));

    VkVertexInputAttributeDescription input_attrib;
    memset(&input_attrib, 0, sizeof(input_attrib));
    input_attrib.format = VK_FORMAT_R32_SFLOAT;

    char const *vsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) in int x;\n" /* attrib provided float */
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(x);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    pipe.AddVertexInputBindings(&input_binding, 1);
    pipe.AddVertexInputAttribs(&input_attrib, 1);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineDuplicateStage) {
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Multiple shaders provided for stage VK_SHADER_STAGE_VERTEX_BIT");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    char const *vsSource =
        "#version 450\n"
        "\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(1);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineAttribMatrixType) {
    m_errorMonitor->ExpectSuccess();

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkVertexInputBindingDescription input_binding;
    memset(&input_binding, 0, sizeof(input_binding));

    VkVertexInputAttributeDescription input_attribs[2];
    memset(input_attribs, 0, sizeof(input_attribs));

    for (int i = 0; i < 2; i++) {
        input_attribs[i].format = VK_FORMAT_R32G32B32A32_SFLOAT;
        input_attribs[i].location = i;
    }

    char const *vsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) in mat2x4 x;\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = x[0] + x[1];\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    pipe.AddVertexInputBindings(&input_binding, 1);
    pipe.AddVertexInputAttribs(input_attribs, 2);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    /* expect success */
    m_errorMonitor->VerifyNotFound();
}

TEST_F(VkLayerTest, CreatePipelineAttribArrayType)
{
    m_errorMonitor->ExpectSuccess();

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkVertexInputBindingDescription input_binding;
    memset(&input_binding, 0, sizeof(input_binding));

    VkVertexInputAttributeDescription input_attribs[2];
    memset(input_attribs, 0, sizeof(input_attribs));

    for (int i = 0; i < 2; i++) {
        input_attribs[i].format = VK_FORMAT_R32G32B32A32_SFLOAT;
        input_attribs[i].location = i;
    }

    char const *vsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) in vec4 x[2];\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = x[0] + x[1];\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    pipe.AddVertexInputBindings(&input_binding, 1);
    pipe.AddVertexInputAttribs(input_attribs, 2);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyNotFound();
}

TEST_F(VkLayerTest, CreatePipelineSimplePositive)
{
    m_errorMonitor->ExpectSuccess();

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    char const *vsSource =
        "#version 450\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(0);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyNotFound();
}

TEST_F(VkLayerTest, CreatePipelineRelaxedTypeMatch)
{
    m_errorMonitor->ExpectSuccess();

    // VK 1.0.8 Specification, 14.1.3 "Additionally,..." block

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    char const *vsSource =
        "#version 450\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "layout(location=0) out vec3 x;\n"
        "layout(location=1) out ivec3 y;\n"
        "layout(location=2) out vec3 z;\n"
        "void main(){\n"
        "   gl_Position = vec4(0);\n"
        "   x = vec3(0); y = ivec3(0); z = vec3(0);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 color;\n"
        "layout(location=0) in float x;\n"
        "layout(location=1) flat in int y;\n"
        "layout(location=2) in vec2 z;\n"
        "void main(){\n"
        "   color = vec4(1 + x + y + z.x);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyNotFound();
}

TEST_F(VkLayerTest, CreatePipelineTessPerVertex)
{
    m_errorMonitor->ExpectSuccess();

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    if (!m_device->phy().features().tessellationShader) {
        printf("Device does not support tessellation shaders; skipped.\n");
        return;
    }

    char const *vsSource =
        "#version 450\n"
        "void main(){}\n";
    char const *tcsSource =
        "#version 450\n"
        "layout(location=0) out int x[];\n"
        "layout(vertices=3) out;\n"
        "void main(){\n"
        "   gl_TessLevelOuter[0] = gl_TessLevelOuter[1] = gl_TessLevelOuter[2] = 1;\n"
        "   gl_TessLevelInner[0] = 1;\n"
        "   x[gl_InvocationID] = gl_InvocationID;\n"
        "}\n";
    char const *tesSource =
        "#version 450\n"
        "layout(triangles, equal_spacing, cw) in;\n"
        "layout(location=0) in int x[];\n"
        "out gl_PerVertex { vec4 gl_Position; };\n"
        "void main(){\n"
        "   gl_Position.xyz = gl_TessCoord;\n"
        "   gl_Position.w = x[0] + x[1] + x[2];\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj tcs(m_device, tcsSource, VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT, this);
    VkShaderObj tes(m_device, tesSource, VK_SHADER_STAGE_TESSELLATION_EVALUATION_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineInputAssemblyStateCreateInfo iasci{
        VK_STRUCTURE_TYPE_PIPELINE_INPUT_ASSEMBLY_STATE_CREATE_INFO,
        nullptr,
        0,
        VK_PRIMITIVE_TOPOLOGY_PATCH_LIST,
        VK_FALSE};

    VkPipelineTessellationStateCreateInfo tsci{
        VK_STRUCTURE_TYPE_PIPELINE_TESSELLATION_STATE_CREATE_INFO,
        nullptr,
        0,
        3};

    VkPipelineObj pipe(m_device);
    pipe.SetInputAssembly(&iasci);
    pipe.SetTessellation(&tsci);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&tcs);
    pipe.AddShader(&tes);
    pipe.AddShader(&fs);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyNotFound();
}

TEST_F(VkLayerTest, CreatePipelineGeometryInputBlockPositive)
{
    m_errorMonitor->ExpectSuccess();

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    if (!m_device->phy().features().geometryShader) {
        printf("Device does not support geometry shaders; skipped.\n");
        return;
    }

    char const *vsSource =
        "#version 450\n"
        "layout(location=0) out VertexData { vec4 x; } vs_out;\n"
        "void main(){\n"
        "   vs_out.x = vec4(1);\n"
        "}\n";
    char const *gsSource =
        "#version 450\n"
        "layout(triangles) in;\n"
        "layout(triangle_strip, max_vertices=3) out;\n"
        "layout(location=0) in VertexData { vec4 x; } gs_in[];\n"
        "out gl_PerVertex { vec4 gl_Position; };\n"
        "void main() {\n"
        "   gl_Position = gs_in[0].x;\n"
        "   EmitVertex();\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj gs(m_device, gsSource, VK_SHADER_STAGE_GEOMETRY_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&gs);
    pipe.AddShader(&fs);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyNotFound();
}

TEST_F(VkLayerTest, CreatePipelineTessPatchDecorationMismatch)
{
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "is per-vertex in tessellation control shader stage "
                                         "but per-patch in tessellation evaluation shader stage");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    if (!m_device->phy().features().tessellationShader) {
        printf("Device does not support tessellation shaders; skipped.\n");
        return;
    }

    char const *vsSource =
        "#version 450\n"
        "void main(){}\n";
    char const *tcsSource =
        "#version 450\n"
        "layout(location=0) out int x[];\n"
        "layout(vertices=3) out;\n"
        "void main(){\n"
        "   gl_TessLevelOuter[0] = gl_TessLevelOuter[1] = gl_TessLevelOuter[2] = 1;\n"
        "   gl_TessLevelInner[0] = 1;\n"
        "   x[gl_InvocationID] = gl_InvocationID;\n"
        "}\n";
    char const *tesSource =
        "#version 450\n"
        "layout(triangles, equal_spacing, cw) in;\n"
        "layout(location=0) patch in int x;\n"
        "out gl_PerVertex { vec4 gl_Position; };\n"
        "void main(){\n"
        "   gl_Position.xyz = gl_TessCoord;\n"
        "   gl_Position.w = x;\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj tcs(m_device, tcsSource, VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT, this);
    VkShaderObj tes(m_device, tesSource, VK_SHADER_STAGE_TESSELLATION_EVALUATION_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineInputAssemblyStateCreateInfo iasci{
        VK_STRUCTURE_TYPE_PIPELINE_INPUT_ASSEMBLY_STATE_CREATE_INFO,
        nullptr,
        0,
        VK_PRIMITIVE_TOPOLOGY_PATCH_LIST,
        VK_FALSE};

    VkPipelineTessellationStateCreateInfo tsci{
        VK_STRUCTURE_TYPE_PIPELINE_TESSELLATION_STATE_CREATE_INFO,
        nullptr,
        0,
        3};

    VkPipelineObj pipe(m_device);
    pipe.SetInputAssembly(&iasci);
    pipe.SetTessellation(&tsci);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&tcs);
    pipe.AddShader(&tes);
    pipe.AddShader(&fs);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineAttribBindingConflict) {
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Duplicate vertex input binding descriptions for binding 0");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    /* Two binding descriptions for binding 0 */
    VkVertexInputBindingDescription input_bindings[2];
    memset(input_bindings, 0, sizeof(input_bindings));

    VkVertexInputAttributeDescription input_attrib;
    memset(&input_attrib, 0, sizeof(input_attrib));
    input_attrib.format = VK_FORMAT_R32_SFLOAT;

    char const *vsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) in float x;\n" /* attrib provided float */
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(x);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    pipe.AddVertexInputBindings(input_bindings, 2);
    pipe.AddVertexInputAttribs(&input_attrib, 1);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipeline64BitAttributesPositive) {
    m_errorMonitor->ExpectSuccess();

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    if (!m_device->phy().features().tessellationShader) {
        printf("Device does not support 64bit vertex attributes; skipped.\n");
        return;
    }

    VkVertexInputBindingDescription input_bindings[1];
    memset(input_bindings, 0, sizeof(input_bindings));

    VkVertexInputAttributeDescription input_attribs[4];
    memset(input_attribs, 0, sizeof(input_attribs));
    input_attribs[0].location = 0;
    input_attribs[0].offset = 0;
    input_attribs[0].format = VK_FORMAT_R64G64B64A64_SFLOAT;
    input_attribs[1].location = 2;
    input_attribs[1].offset = 32;
    input_attribs[1].format = VK_FORMAT_R64G64B64A64_SFLOAT;
    input_attribs[2].location = 4;
    input_attribs[2].offset = 64;
    input_attribs[2].format = VK_FORMAT_R64G64B64A64_SFLOAT;
    input_attribs[3].location = 6;
    input_attribs[3].offset = 96;
    input_attribs[3].format = VK_FORMAT_R64G64B64A64_SFLOAT;

    char const *vsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) in dmat4 x;\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(x[0][0]);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 color;\n"
        "void main(){\n"
        "   color = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddColorAttachment();
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    pipe.AddVertexInputBindings(input_bindings, 1);
    pipe.AddVertexInputAttribs(input_attribs, 4);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyNotFound();
}

TEST_F(VkLayerTest, CreatePipelineFragmentOutputNotWritten) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Attachment 0 not written by FS");

    ASSERT_NO_FATAL_FAILURE(InitState());

    char const *vsSource =
        "#version 450\n"
        "\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(1);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "void main(){\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    /* set up CB 0, not written */
    pipe.AddColorAttachment();
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineFragmentOutputNotConsumed) {
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_WARNING_BIT_EXT,
        "FS writes to output location 1 with no matching attachment");

    ASSERT_NO_FATAL_FAILURE(InitState());

    char const *vsSource =
        "#version 450\n"
        "\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(1);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 x;\n"
        "layout(location=1) out vec4 y;\n" /* no matching attachment for this */
        "void main(){\n"
        "   x = vec4(1);\n"
        "   y = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    /* set up CB 0, not written */
    pipe.AddColorAttachment();
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());
    /* FS writes CB 1, but we don't configure it */

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineFragmentOutputTypeMismatch) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "does not match FS output type");

    ASSERT_NO_FATAL_FAILURE(InitState());

    char const *vsSource =
        "#version 450\n"
        "\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(1);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out ivec4 x;\n" /* not UNORM */
        "void main(){\n"
        "   x = ivec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    /* set up CB 0; type is UNORM by default */
    pipe.AddColorAttachment();
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.AppendDummy();
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelineUniformBlockNotProvided) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "not declared in pipeline layout");

    ASSERT_NO_FATAL_FAILURE(InitState());

    char const *vsSource =
        "#version 450\n"
        "\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(1);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 x;\n"
        "layout(set=0) layout(binding=0) uniform foo { int x; int y; } bar;\n"
        "void main(){\n"
        "   x = vec4(bar.y);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    /* set up CB 0; type is UNORM by default */
    pipe.AddColorAttachment();
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreatePipelinePushConstantsNotInLayout) {
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "not declared in layout");

    ASSERT_NO_FATAL_FAILURE(InitState());

    char const *vsSource =
        "#version 450\n"
        "\n"
        "layout(push_constant, std430) uniform foo { float x; } consts;\n"
        "out gl_PerVertex {\n"
        "    vec4 gl_Position;\n"
        "};\n"
        "void main(){\n"
        "   gl_Position = vec4(consts.x);\n"
        "}\n";
    char const *fsSource =
        "#version 450\n"
        "\n"
        "layout(location=0) out vec4 x;\n"
        "void main(){\n"
        "   x = vec4(1);\n"
        "}\n";

    VkShaderObj vs(m_device, vsSource, VK_SHADER_STAGE_VERTEX_BIT, this);
    VkShaderObj fs(m_device, fsSource, VK_SHADER_STAGE_FRAGMENT_BIT, this);

    VkPipelineObj pipe(m_device);
    pipe.AddShader(&vs);
    pipe.AddShader(&fs);

    /* set up CB 0; type is UNORM by default */
    pipe.AddColorAttachment();
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    pipe.CreateVKPipeline(descriptorSet.GetPipelineLayout(), renderPass());

    /* should have generated an error -- no push constant ranges provided! */
    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreateComputePipelineMissingDescriptor) {
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Shader uses descriptor slot 0.0");

    ASSERT_NO_FATAL_FAILURE(InitState());

    char const *csSource =
        "#version 450\n"
        "\n"
        "layout(local_size_x=1) in;\n"
        "layout(set=0, binding=0) buffer block { vec4 x; };\n"
        "void main(){\n"
        "   x = vec4(1);\n"
        "}\n";

    VkShaderObj cs(m_device, csSource, VK_SHADER_STAGE_COMPUTE_BIT, this);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    VkComputePipelineCreateInfo cpci = {
        VK_STRUCTURE_TYPE_COMPUTE_PIPELINE_CREATE_INFO,
        nullptr, 0, {
          VK_STRUCTURE_TYPE_PIPELINE_SHADER_STAGE_CREATE_INFO,
          nullptr, 0, VK_SHADER_STAGE_COMPUTE_BIT,
          cs.handle(), "main", nullptr
        },
        descriptorSet.GetPipelineLayout(),
        VK_NULL_HANDLE, -1
    };

    VkPipeline pipe;
    VkResult err = vkCreateComputePipelines(
        m_device->device(), VK_NULL_HANDLE, 1, &cpci, nullptr, &pipe);

    m_errorMonitor->VerifyFound();

    if (err == VK_SUCCESS) {
        vkDestroyPipeline(m_device->device(), pipe, nullptr);
    }
}

TEST_F(VkLayerTest, CreateComputePipelineMissingDescriptorUnusedPositive) {
    m_errorMonitor->ExpectSuccess();

    ASSERT_NO_FATAL_FAILURE(InitState());

    char const *csSource =
        "#version 450\n"
        "\n"
        "layout(local_size_x=1) in;\n"
        "layout(set=0, binding=0) buffer block { vec4 x; };\n"
        "void main(){\n"
        "   // x is not used.\n"
        "}\n";

    VkShaderObj cs(m_device, csSource, VK_SHADER_STAGE_COMPUTE_BIT, this);

    VkDescriptorSetObj descriptorSet(m_device);
    descriptorSet.CreateVKDescriptorSet(m_commandBuffer);

    VkComputePipelineCreateInfo cpci = {
        VK_STRUCTURE_TYPE_COMPUTE_PIPELINE_CREATE_INFO,
        nullptr, 0, {
          VK_STRUCTURE_TYPE_PIPELINE_SHADER_STAGE_CREATE_INFO,
          nullptr, 0, VK_SHADER_STAGE_COMPUTE_BIT,
          cs.handle(), "main", nullptr
        },
        descriptorSet.GetPipelineLayout(),
        VK_NULL_HANDLE, -1
    };

    VkPipeline pipe;
    VkResult err = vkCreateComputePipelines(
        m_device->device(), VK_NULL_HANDLE, 1, &cpci, nullptr, &pipe);

    m_errorMonitor->VerifyNotFound();

    if (err == VK_SUCCESS) {
        vkDestroyPipeline(m_device->device(), pipe, nullptr);
    }
}

#endif // SHADER_CHECKER_TESTS

#if DEVICE_LIMITS_TESTS
TEST_F(VkLayerTest, CreateImageLimitsViolationMaxWidth) {
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "CreateImage extents exceed allowable limits for format");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Create an image
    VkImage image;

    const VkFormat tex_format = VK_FORMAT_B8G8R8A8_UNORM;
    const int32_t tex_width = 32;
    const int32_t tex_height = 32;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = tex_format;
    image_create_info.extent.width = tex_width;
    image_create_info.extent.height = tex_height;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_LINEAR;
    image_create_info.usage = VK_IMAGE_USAGE_SAMPLED_BIT;
    image_create_info.flags = 0;

    // Introduce error by sending down a bogus width extent
    image_create_info.extent.width = 65536;
    vkCreateImage(m_device->device(), &image_create_info, NULL, &image);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CreateImageLimitsViolationMinWidth) {
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "CreateImage extents is 0 for at least one required dimension");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Create an image
    VkImage image;

    const VkFormat tex_format = VK_FORMAT_B8G8R8A8_UNORM;
    const int32_t tex_width = 32;
    const int32_t tex_height = 32;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = tex_format;
    image_create_info.extent.width = tex_width;
    image_create_info.extent.height = tex_height;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_LINEAR;
    image_create_info.usage = VK_IMAGE_USAGE_SAMPLED_BIT;
    image_create_info.flags = 0;

    // Introduce error by sending down a bogus width extent
    image_create_info.extent.width = 0;
    vkCreateImage(m_device->device(), &image_create_info, NULL, &image);

    m_errorMonitor->VerifyFound();
}
#endif // DEVICE_LIMITS_TESTS

#if IMAGE_TESTS
TEST_F(VkLayerTest, InvalidImageView) {
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCreateImageView called with baseMipLevel 10 ");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Create an image and try to create a view with bad baseMipLevel
    VkImage image;

    const VkFormat tex_format = VK_FORMAT_B8G8R8A8_UNORM;
    const int32_t tex_width = 32;
    const int32_t tex_height = 32;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = tex_format;
    image_create_info.extent.width = tex_width;
    image_create_info.extent.height = tex_height;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_LINEAR;
    image_create_info.usage = VK_IMAGE_USAGE_SAMPLED_BIT;
    image_create_info.flags = 0;

    err = vkCreateImage(m_device->device(), &image_create_info, NULL, &image);
    ASSERT_VK_SUCCESS(err);

    VkImageViewCreateInfo image_view_create_info = {};
    image_view_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_view_create_info.image = image;
    image_view_create_info.viewType = VK_IMAGE_VIEW_TYPE_2D;
    image_view_create_info.format = tex_format;
    image_view_create_info.subresourceRange.layerCount = 1;
    image_view_create_info.subresourceRange.baseMipLevel = 10; // cause an error
    image_view_create_info.subresourceRange.levelCount = 1;
    image_view_create_info.subresourceRange.aspectMask =
        VK_IMAGE_ASPECT_COLOR_BIT;

    VkImageView view;
    err = vkCreateImageView(m_device->device(), &image_view_create_info, NULL,
                            &view);

    m_errorMonitor->VerifyFound();
    vkDestroyImage(m_device->device(), image, NULL);
}

TEST_F(VkLayerTest, InvalidImageViewAspect) {
    TEST_DESCRIPTION(
        "Create an image and try to create a view with an invalid aspectMask");
    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "vkCreateImageView: Color image "
                                         "formats must have ONLY the "
                                         "VK_IMAGE_ASPECT_COLOR_BIT set");

    ASSERT_NO_FATAL_FAILURE(InitState());

    const VkFormat tex_format = VK_FORMAT_B8G8R8A8_UNORM;
    VkImageObj image(m_device);
    image.init(32, 32, tex_format, VK_IMAGE_USAGE_SAMPLED_BIT,
               VK_IMAGE_TILING_LINEAR, 0);
    ASSERT_TRUE(image.initialized());

    VkImageViewCreateInfo image_view_create_info = {};
    image_view_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_view_create_info.image = image.handle();
    image_view_create_info.viewType = VK_IMAGE_VIEW_TYPE_2D;
    image_view_create_info.format = tex_format;
    image_view_create_info.subresourceRange.baseMipLevel = 0;
    image_view_create_info.subresourceRange.levelCount = 1;
    // Cause an error by setting an invalid image aspect
    image_view_create_info.subresourceRange.aspectMask =
        VK_IMAGE_ASPECT_METADATA_BIT;

    VkImageView view;
    vkCreateImageView(m_device->device(), &image_view_create_info, NULL, &view);

    m_errorMonitor->VerifyFound();
}

TEST_F(VkLayerTest, CopyImageLayerCountMismatch) {
    VkResult err;
    bool pass;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCmdCopyImage: number of layers in source and destination subresources for pRegions");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Create two images of different types and try to copy between them
    VkImage srcImage;
    VkImage dstImage;
    VkDeviceMemory srcMem;
    VkDeviceMemory destMem;
    VkMemoryRequirements memReqs;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = VK_FORMAT_B8G8R8A8_UNORM;
    image_create_info.extent.width = 32;
    image_create_info.extent.height = 32;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 4;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_OPTIMAL;
    image_create_info.usage = VK_IMAGE_USAGE_TRANSFER_SRC_BIT;
    image_create_info.flags = 0;

    err =
        vkCreateImage(m_device->device(), &image_create_info, NULL, &srcImage);
    ASSERT_VK_SUCCESS(err);

    err =
        vkCreateImage(m_device->device(), &image_create_info, NULL, &dstImage);
    ASSERT_VK_SUCCESS(err);

    // Allocate memory
    VkMemoryAllocateInfo memAlloc = {};
    memAlloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    memAlloc.pNext = NULL;
    memAlloc.allocationSize = 0;
    memAlloc.memoryTypeIndex = 0;

    vkGetImageMemoryRequirements(m_device->device(), srcImage, &memReqs);
    memAlloc.allocationSize = memReqs.size;
    pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &memAlloc, 0);
    ASSERT_TRUE(pass);
    err = vkAllocateMemory(m_device->device(), &memAlloc, NULL, &srcMem);
    ASSERT_VK_SUCCESS(err);

    vkGetImageMemoryRequirements(m_device->device(), dstImage, &memReqs);
    memAlloc.allocationSize = memReqs.size;
    pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &memAlloc, 0);
    ASSERT_VK_SUCCESS(err);
    err = vkAllocateMemory(m_device->device(), &memAlloc, NULL, &destMem);
    ASSERT_VK_SUCCESS(err);

    err = vkBindImageMemory(m_device->device(), srcImage, srcMem, 0);
    ASSERT_VK_SUCCESS(err);
    err = vkBindImageMemory(m_device->device(), dstImage, destMem, 0);
    ASSERT_VK_SUCCESS(err);

    BeginCommandBuffer();
    VkImageCopy copyRegion;
    copyRegion.srcSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    copyRegion.srcSubresource.mipLevel = 0;
    copyRegion.srcSubresource.baseArrayLayer = 0;
    copyRegion.srcSubresource.layerCount = 1;
    copyRegion.srcOffset.x = 0;
    copyRegion.srcOffset.y = 0;
    copyRegion.srcOffset.z = 0;
    copyRegion.dstSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    copyRegion.dstSubresource.mipLevel = 0;
    copyRegion.dstSubresource.baseArrayLayer = 0;
    // Introduce failure by forcing the dst layerCount to differ from src
    copyRegion.dstSubresource.layerCount = 3;
    copyRegion.dstOffset.x = 0;
    copyRegion.dstOffset.y = 0;
    copyRegion.dstOffset.z = 0;
    copyRegion.extent.width = 1;
    copyRegion.extent.height = 1;
    copyRegion.extent.depth = 1;
    m_commandBuffer->CopyImage(srcImage, VK_IMAGE_LAYOUT_GENERAL, dstImage,
                               VK_IMAGE_LAYOUT_GENERAL, 1, &copyRegion);
    EndCommandBuffer();

    m_errorMonitor->VerifyFound();

    vkDestroyImage(m_device->device(), srcImage, NULL);
    vkDestroyImage(m_device->device(), dstImage, NULL);
    vkFreeMemory(m_device->device(), srcMem, NULL);
    vkFreeMemory(m_device->device(), destMem, NULL);
}

TEST_F(VkLayerTest, ImageLayerUnsupportedFormat) {

    TEST_DESCRIPTION("Creating images with unsuported formats ");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());
    VkImageObj image(m_device);
    image.init(128, 128, VK_FORMAT_B8G8R8A8_UNORM,
               VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT |
                   VK_IMAGE_USAGE_TRANSFER_DST_BIT,
               VK_IMAGE_TILING_OPTIMAL, 0);
    ASSERT_TRUE(image.initialized());

    // Create image with unsupported format - Expect FORMAT_UNSUPPORTED
    VkImageCreateInfo image_create_info;
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = VK_FORMAT_UNDEFINED;
    image_create_info.extent.width = 32;
    image_create_info.extent.height = 32;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_OPTIMAL;
    image_create_info.usage = VK_IMAGE_USAGE_TRANSFER_SRC_BIT;
    image_create_info.flags = 0;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCreateImage: VkFormat for image must not be VK_FORMAT_UNDEFINED");

    VkImage localImage;
    vkCreateImage(m_device->handle(), &image_create_info, NULL, &localImage);
    m_errorMonitor->VerifyFound();

    VkFormat unsupported = VK_FORMAT_UNDEFINED;
    // Look for a format that is COMPLETELY unsupported with this hardware
    for (int f = VK_FORMAT_BEGIN_RANGE; f <= VK_FORMAT_END_RANGE; f++) {
        VkFormat format = static_cast<VkFormat>(f);
        VkFormatProperties fProps = m_device->format_properties(format);
        if (format != VK_FORMAT_UNDEFINED && fProps.linearTilingFeatures == 0 &&
            fProps.optimalTilingFeatures == 0) {
            unsupported = format;
            break;
        }
    }

    if (unsupported != VK_FORMAT_UNDEFINED) {
        image_create_info.format = unsupported;
        m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                             "is an unsupported format");

        vkCreateImage(m_device->handle(), &image_create_info, NULL, &localImage);
        m_errorMonitor->VerifyFound();
    }
}

TEST_F(VkLayerTest, ImageLayerViewTests) {
    VkResult ret;
    TEST_DESCRIPTION("Passing bad parameters to CreateImageView");

    ASSERT_NO_FATAL_FAILURE(InitState());

    VkImageObj image(m_device);
    image.init(128, 128, VK_FORMAT_B8G8R8A8_UNORM,
               VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT |
                   VK_IMAGE_USAGE_TRANSFER_DST_BIT,
               VK_IMAGE_TILING_OPTIMAL, 0);
    ASSERT_TRUE(image.initialized());

    VkImageView imgView;
    VkImageViewCreateInfo imgViewInfo = {};
    imgViewInfo.sType = VK_STRUCTURE_TYPE_IMAGE_VIEW_CREATE_INFO;
    imgViewInfo.image = image.handle();
    imgViewInfo.viewType = VK_IMAGE_VIEW_TYPE_2D;
    imgViewInfo.format = VK_FORMAT_B8G8R8A8_UNORM;
    imgViewInfo.subresourceRange.layerCount = 1;
    imgViewInfo.subresourceRange.baseMipLevel = 0;
    imgViewInfo.subresourceRange.levelCount = 1;
    imgViewInfo.subresourceRange.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCreateImageView called with baseMipLevel");
    // View can't have baseMipLevel >= image's mipLevels - Expect
    // VIEW_CREATE_ERROR
    imgViewInfo.subresourceRange.baseMipLevel = 1;
    vkCreateImageView(m_device->handle(), &imgViewInfo, NULL, &imgView);
    m_errorMonitor->VerifyFound();
    imgViewInfo.subresourceRange.baseMipLevel = 0;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCreateImageView called with baseArrayLayer");
    // View can't have baseArrayLayer >= image's arraySize - Expect
    // VIEW_CREATE_ERROR
    imgViewInfo.subresourceRange.baseArrayLayer = 1;
    vkCreateImageView(m_device->handle(), &imgViewInfo, NULL, &imgView);
    m_errorMonitor->VerifyFound();
    imgViewInfo.subresourceRange.baseArrayLayer = 0;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "vkCreateImageView called with 0 in "
                                         "pCreateInfo->subresourceRange."
                                         "levelCount");
    // View's levelCount can't be 0 - Expect VIEW_CREATE_ERROR
    imgViewInfo.subresourceRange.levelCount = 0;
    vkCreateImageView(m_device->handle(), &imgViewInfo, NULL, &imgView);
    m_errorMonitor->VerifyFound();
    imgViewInfo.subresourceRange.levelCount = 1;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "vkCreateImageView called with 0 in "
                                         "pCreateInfo->subresourceRange."
                                         "layerCount");
    // View's layerCount can't be 0 - Expect VIEW_CREATE_ERROR
    imgViewInfo.subresourceRange.layerCount = 0;
    vkCreateImageView(m_device->handle(), &imgViewInfo, NULL, &imgView);
    m_errorMonitor->VerifyFound();
    imgViewInfo.subresourceRange.layerCount = 1;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "but both must be color formats");
    // Can't use depth format for view into color image - Expect INVALID_FORMAT
    imgViewInfo.format = VK_FORMAT_D24_UNORM_S8_UINT;
    vkCreateImageView(m_device->handle(), &imgViewInfo, NULL, &imgView);
    m_errorMonitor->VerifyFound();
    imgViewInfo.format = VK_FORMAT_B8G8R8A8_UNORM;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "Formats MUST be IDENTICAL unless "
                                         "VK_IMAGE_CREATE_MUTABLE_FORMAT BIT "
                                         "was set on image creation.");
    // Same compatibility class but no MUTABLE_FORMAT bit - Expect
    // VIEW_CREATE_ERROR
    imgViewInfo.format = VK_FORMAT_B8G8R8A8_UINT;
    vkCreateImageView(m_device->handle(), &imgViewInfo, NULL, &imgView);
    m_errorMonitor->VerifyFound();
    imgViewInfo.format = VK_FORMAT_B8G8R8A8_UNORM;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "can support ImageViews with "
                                         "differing formats but they must be "
                                         "in the same compatibility class.");
    // Have MUTABLE_FORMAT bit but not in same compatibility class - Expect
    // VIEW_CREATE_ERROR
    VkImageCreateInfo mutImgInfo = image.create_info();
    VkImage mutImage;
    mutImgInfo.format = VK_FORMAT_R8_UINT;
    assert(
        m_device->format_properties(VK_FORMAT_R8_UINT).optimalTilingFeatures &
        VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT);
    mutImgInfo.flags = VK_IMAGE_CREATE_MUTABLE_FORMAT_BIT;
    mutImgInfo.usage = VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT;
    ret = vkCreateImage(m_device->handle(), &mutImgInfo, NULL, &mutImage);
    ASSERT_VK_SUCCESS(ret);
    imgViewInfo.image = mutImage;
    vkCreateImageView(m_device->handle(), &imgViewInfo, NULL, &imgView);
    m_errorMonitor->VerifyFound();
    imgViewInfo.image = image.handle();
    vkDestroyImage(m_device->handle(), mutImage, NULL);
}

TEST_F(VkLayerTest, MiscImageLayerTests) {

    TEST_DESCRIPTION("Image layer tests that don't belong elsewhare");

    ASSERT_NO_FATAL_FAILURE(InitState());

    VkImageObj image(m_device);
    image.init(128, 128, VK_FORMAT_B8G8R8A8_UNORM,
               VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT |
                   VK_IMAGE_USAGE_TRANSFER_DST_BIT,
               VK_IMAGE_TILING_OPTIMAL, 0);
    ASSERT_TRUE(image.initialized());

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "number of layers in image subresource is zero");
    vk_testing::Buffer buffer;
    VkMemoryPropertyFlags reqs = 0;
    buffer.init_as_src(*m_device, 128 * 128 * 4, reqs);
    VkBufferImageCopy region = {};
    region.bufferRowLength = 128;
    region.bufferImageHeight = 128;
    region.imageSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    // layerCount can't be 0 - Expect MISMATCHED_IMAGE_ASPECT
    region.imageSubresource.layerCount = 0;
    region.imageExtent.height = 4;
    region.imageExtent.width = 4;
    region.imageExtent.depth = 1;
    m_commandBuffer->BeginCommandBuffer();
    vkCmdCopyBufferToImage(m_commandBuffer->GetBufferHandle(), buffer.handle(),
                           image.handle(), VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL,
                           1, &region);
    m_errorMonitor->VerifyFound();
    region.imageSubresource.layerCount = 1;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "aspectMasks for each region must "
                                         "specify only COLOR or DEPTH or "
                                         "STENCIL");
    // Expect MISMATCHED_IMAGE_ASPECT
    region.imageSubresource.aspectMask = VK_IMAGE_ASPECT_METADATA_BIT;
    vkCmdCopyBufferToImage(m_commandBuffer->GetBufferHandle(), buffer.handle(),
                           image.handle(), VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL,
                           1, &region);
    m_errorMonitor->VerifyFound();
    region.imageSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "If the format of srcImage is a depth, stencil, depth stencil or "
        "integer-based format then filter must be VK_FILTER_NEAREST");
    // Expect INVALID_FILTER
    VkImageObj intImage1(m_device);
    intImage1.init(128, 128, VK_FORMAT_R8_UINT,
                   VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT, VK_IMAGE_TILING_OPTIMAL,
                   0);
    VkImageObj intImage2(m_device);
    intImage2.init(128, 128, VK_FORMAT_R8_UINT,
                   VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT, VK_IMAGE_TILING_OPTIMAL,
                   0);
    VkImageBlit blitRegion = {};
    blitRegion.srcSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    blitRegion.srcSubresource.baseArrayLayer = 0;
    blitRegion.srcSubresource.layerCount = 1;
    blitRegion.srcSubresource.mipLevel = 0;
    blitRegion.dstSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    blitRegion.dstSubresource.baseArrayLayer = 0;
    blitRegion.dstSubresource.layerCount = 1;
    blitRegion.dstSubresource.mipLevel = 0;

    vkCmdBlitImage(m_commandBuffer->GetBufferHandle(), intImage1.handle(),
                   intImage1.layout(), intImage2.handle(), intImage2.layout(),
                   16, &blitRegion, VK_FILTER_LINEAR);
    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "called with 0 in ppMemoryBarriers");
    VkImageMemoryBarrier img_barrier;
    img_barrier.sType = VK_STRUCTURE_TYPE_IMAGE_MEMORY_BARRIER;
    img_barrier.pNext = NULL;
    img_barrier.srcAccessMask = VK_ACCESS_HOST_WRITE_BIT;
    img_barrier.dstAccessMask = VK_ACCESS_SHADER_READ_BIT;
    img_barrier.oldLayout = VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL;
    img_barrier.newLayout = VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL;
    img_barrier.image = image.handle();
    img_barrier.srcQueueFamilyIndex = VK_QUEUE_FAMILY_IGNORED;
    img_barrier.dstQueueFamilyIndex = VK_QUEUE_FAMILY_IGNORED;
    img_barrier.subresourceRange.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    img_barrier.subresourceRange.baseArrayLayer = 0;
    img_barrier.subresourceRange.baseMipLevel = 0;
    // layerCount should not be 0 - Expect INVALID_IMAGE_RESOURCE
    img_barrier.subresourceRange.layerCount = 0;
    img_barrier.subresourceRange.levelCount = 1;
    vkCmdPipelineBarrier(m_commandBuffer->GetBufferHandle(),
                         VK_PIPELINE_STAGE_HOST_BIT,
                         VK_PIPELINE_STAGE_VERTEX_SHADER_BIT, 0, 0, nullptr, 0,
                         nullptr, 1, &img_barrier);
    m_errorMonitor->VerifyFound();
    img_barrier.subresourceRange.layerCount = 1;
}

TEST_F(VkLayerTest, ImageFormatLimits) {

    TEST_DESCRIPTION("Exceed the limits of image format ");

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "CreateImage extents exceed allowable limits for format");
    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = VK_FORMAT_B8G8R8A8_UNORM;
    image_create_info.extent.width = 32;
    image_create_info.extent.height = 32;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_LINEAR;
    image_create_info.usage = VK_IMAGE_USAGE_TRANSFER_SRC_BIT;
    image_create_info.initialLayout = VK_IMAGE_LAYOUT_UNDEFINED;
    image_create_info.flags = 0;

    VkImage nullImg;
    VkImageFormatProperties imgFmtProps;
    vkGetPhysicalDeviceImageFormatProperties(
        gpu(), image_create_info.format, image_create_info.imageType,
        image_create_info.tiling, image_create_info.usage,
        image_create_info.flags, &imgFmtProps);
    image_create_info.extent.depth = imgFmtProps.maxExtent.depth + 1;
    // Expect INVALID_FORMAT_LIMITS_VIOLATION
    vkCreateImage(m_device->handle(), &image_create_info, NULL, &nullImg);
    m_errorMonitor->VerifyFound();
    image_create_info.extent.depth = 1;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "exceeds allowable maximum supported by format of");
    image_create_info.mipLevels = imgFmtProps.maxMipLevels + 1;
    // Expect INVALID_FORMAT_LIMITS_VIOLATION
    vkCreateImage(m_device->handle(), &image_create_info, NULL, &nullImg);
    m_errorMonitor->VerifyFound();
    image_create_info.mipLevels = 1;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "exceeds allowable maximum supported by format of");
    image_create_info.arrayLayers = imgFmtProps.maxArrayLayers + 1;
    // Expect INVALID_FORMAT_LIMITS_VIOLATION
    vkCreateImage(m_device->handle(), &image_create_info, NULL, &nullImg);
    m_errorMonitor->VerifyFound();
    image_create_info.arrayLayers = 1;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "is not supported by format");
    int samples = imgFmtProps.sampleCounts >> 1;
    image_create_info.samples = (VkSampleCountFlagBits)samples;
    // Expect INVALID_FORMAT_LIMITS_VIOLATION
    vkCreateImage(m_device->handle(), &image_create_info, NULL, &nullImg);
    m_errorMonitor->VerifyFound();
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "pCreateInfo->initialLayout, must be "
                                         "VK_IMAGE_LAYOUT_UNDEFINED or "
                                         "VK_IMAGE_LAYOUT_PREINITIALIZED");
    image_create_info.initialLayout = VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL;
    // Expect INVALID_LAYOUT
    vkCreateImage(m_device->handle(), &image_create_info, NULL, &nullImg);
    m_errorMonitor->VerifyFound();
    image_create_info.initialLayout = VK_IMAGE_LAYOUT_UNDEFINED;
}

TEST_F(VkLayerTest, CopyImageFormatSizeMismatch) {
    VkResult err;
    bool pass;

    // Create color images with different format sizes and try to copy between them
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCmdCopyImage called with unmatched source and dest image format sizes");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Create two images of different types and try to copy between them
    VkImage srcImage;
    VkImage dstImage;
    VkDeviceMemory srcMem;
    VkDeviceMemory destMem;
    VkMemoryRequirements memReqs;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = VK_FORMAT_B8G8R8A8_UNORM;
    image_create_info.extent.width = 32;
    image_create_info.extent.height = 32;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_LINEAR;
    image_create_info.usage = VK_IMAGE_USAGE_TRANSFER_SRC_BIT;
    image_create_info.flags = 0;

    err =
        vkCreateImage(m_device->device(), &image_create_info, NULL, &srcImage);
    ASSERT_VK_SUCCESS(err);

    image_create_info.usage = VK_IMAGE_USAGE_TRANSFER_DST_BIT;
    // Introduce failure by creating second image with a different-sized format.
    image_create_info.format = VK_FORMAT_R5G5B5A1_UNORM_PACK16;

    err =
        vkCreateImage(m_device->device(), &image_create_info, NULL, &dstImage);
    ASSERT_VK_SUCCESS(err);

    // Allocate memory
    VkMemoryAllocateInfo memAlloc = {};
    memAlloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    memAlloc.pNext = NULL;
    memAlloc.allocationSize = 0;
    memAlloc.memoryTypeIndex = 0;

    vkGetImageMemoryRequirements(m_device->device(), srcImage, &memReqs);
    memAlloc.allocationSize = memReqs.size;
    pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &memAlloc, 0);
    ASSERT_TRUE(pass);
    err = vkAllocateMemory(m_device->device(), &memAlloc, NULL, &srcMem);
    ASSERT_VK_SUCCESS(err);

    vkGetImageMemoryRequirements(m_device->device(), dstImage, &memReqs);
    memAlloc.allocationSize = memReqs.size;
    pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &memAlloc, 0);
    ASSERT_TRUE(pass);
    err = vkAllocateMemory(m_device->device(), &memAlloc, NULL, &destMem);
    ASSERT_VK_SUCCESS(err);

    err = vkBindImageMemory(m_device->device(), srcImage, srcMem, 0);
    ASSERT_VK_SUCCESS(err);
    err = vkBindImageMemory(m_device->device(), dstImage, destMem, 0);
    ASSERT_VK_SUCCESS(err);

    BeginCommandBuffer();
    VkImageCopy copyRegion;
    copyRegion.srcSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    copyRegion.srcSubresource.mipLevel = 0;
    copyRegion.srcSubresource.baseArrayLayer = 0;
    copyRegion.srcSubresource.layerCount = 0;
    copyRegion.srcOffset.x = 0;
    copyRegion.srcOffset.y = 0;
    copyRegion.srcOffset.z = 0;
    copyRegion.dstSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    copyRegion.dstSubresource.mipLevel = 0;
    copyRegion.dstSubresource.baseArrayLayer = 0;
    copyRegion.dstSubresource.layerCount = 0;
    copyRegion.dstOffset.x = 0;
    copyRegion.dstOffset.y = 0;
    copyRegion.dstOffset.z = 0;
    copyRegion.extent.width = 1;
    copyRegion.extent.height = 1;
    copyRegion.extent.depth = 1;
    m_commandBuffer->CopyImage(srcImage, VK_IMAGE_LAYOUT_GENERAL, dstImage,
                               VK_IMAGE_LAYOUT_GENERAL, 1, &copyRegion);
    EndCommandBuffer();

    m_errorMonitor->VerifyFound();

    vkDestroyImage(m_device->device(), srcImage, NULL);
    vkDestroyImage(m_device->device(), dstImage, NULL);
    vkFreeMemory(m_device->device(), srcMem, NULL);
    vkFreeMemory(m_device->device(), destMem, NULL);
}

TEST_F(VkLayerTest, CopyImageDepthStencilFormatMismatch) {
    VkResult err;
    bool pass;

    // Create a color image and a depth/stencil image and try to copy between them
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCmdCopyImage called with unmatched source and dest image depth");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Create two images of different types and try to copy between them
    VkImage srcImage;
    VkImage dstImage;
    VkDeviceMemory srcMem;
    VkDeviceMemory destMem;
    VkMemoryRequirements memReqs;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = VK_FORMAT_B8G8R8A8_UNORM;
    image_create_info.extent.width = 32;
    image_create_info.extent.height = 32;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_LINEAR;
    image_create_info.usage = VK_IMAGE_USAGE_TRANSFER_SRC_BIT;
    image_create_info.flags = 0;

    err =
        vkCreateImage(m_device->device(), &image_create_info, NULL, &srcImage);
    ASSERT_VK_SUCCESS(err);

    image_create_info.usage = VK_IMAGE_USAGE_TRANSFER_DST_BIT;

    // Introduce failure by creating second image with a depth/stencil format
    image_create_info.tiling = VK_IMAGE_TILING_OPTIMAL;
    image_create_info.format = VK_FORMAT_D24_UNORM_S8_UINT;
    image_create_info.usage = VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT;

    err =
        vkCreateImage(m_device->device(), &image_create_info, NULL, &dstImage);
    ASSERT_VK_SUCCESS(err);

    // Allocate memory
    VkMemoryAllocateInfo memAlloc = {};
    memAlloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    memAlloc.pNext = NULL;
    memAlloc.allocationSize = 0;
    memAlloc.memoryTypeIndex = 0;

    vkGetImageMemoryRequirements(m_device->device(), srcImage, &memReqs);
    memAlloc.allocationSize = memReqs.size;
    pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &memAlloc, 0);
    ASSERT_TRUE(pass);
    err = vkAllocateMemory(m_device->device(), &memAlloc, NULL, &srcMem);
    ASSERT_VK_SUCCESS(err);

    vkGetImageMemoryRequirements(m_device->device(), dstImage, &memReqs);
    memAlloc.allocationSize = memReqs.size;
    pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &memAlloc, 0);
    ASSERT_TRUE(pass);
    err = vkAllocateMemory(m_device->device(), &memAlloc, NULL, &destMem);
    ASSERT_VK_SUCCESS(err);

    err = vkBindImageMemory(m_device->device(), srcImage, srcMem, 0);
    ASSERT_VK_SUCCESS(err);
    err = vkBindImageMemory(m_device->device(), dstImage, destMem, 0);
    ASSERT_VK_SUCCESS(err);

    BeginCommandBuffer();
    VkImageCopy copyRegion;
    copyRegion.srcSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    copyRegion.srcSubresource.mipLevel = 0;
    copyRegion.srcSubresource.baseArrayLayer = 0;
    copyRegion.srcSubresource.layerCount = 0;
    copyRegion.srcOffset.x = 0;
    copyRegion.srcOffset.y = 0;
    copyRegion.srcOffset.z = 0;
    copyRegion.dstSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    copyRegion.dstSubresource.mipLevel = 0;
    copyRegion.dstSubresource.baseArrayLayer = 0;
    copyRegion.dstSubresource.layerCount = 0;
    copyRegion.dstOffset.x = 0;
    copyRegion.dstOffset.y = 0;
    copyRegion.dstOffset.z = 0;
    copyRegion.extent.width = 1;
    copyRegion.extent.height = 1;
    copyRegion.extent.depth = 1;
    m_commandBuffer->CopyImage(srcImage, VK_IMAGE_LAYOUT_GENERAL, dstImage,
                               VK_IMAGE_LAYOUT_GENERAL, 1, &copyRegion);
    EndCommandBuffer();

    m_errorMonitor->VerifyFound();

    vkDestroyImage(m_device->device(), srcImage, NULL);
    vkDestroyImage(m_device->device(), dstImage, NULL);
    vkFreeMemory(m_device->device(), srcMem, NULL);
    vkFreeMemory(m_device->device(), destMem, NULL);
}

TEST_F(VkLayerTest, ResolveImageLowSampleCount) {
    VkResult err;
    bool pass;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCmdResolveImage called with source sample count less than 2.");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Create two images of sample count 1 and try to Resolve between them
    VkImage srcImage;
    VkImage dstImage;
    VkDeviceMemory srcMem;
    VkDeviceMemory destMem;
    VkMemoryRequirements memReqs;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = VK_FORMAT_B8G8R8A8_UNORM;
    image_create_info.extent.width = 32;
    image_create_info.extent.height = 1;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_OPTIMAL;
    image_create_info.usage = VK_IMAGE_USAGE_TRANSFER_SRC_BIT;
    image_create_info.flags = 0;

    err =
        vkCreateImage(m_device->device(), &image_create_info, NULL, &srcImage);
    ASSERT_VK_SUCCESS(err);

    image_create_info.usage = VK_IMAGE_USAGE_TRANSFER_DST_BIT;

    err =
        vkCreateImage(m_device->device(), &image_create_info, NULL, &dstImage);
    ASSERT_VK_SUCCESS(err);

    // Allocate memory
    VkMemoryAllocateInfo memAlloc = {};
    memAlloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    memAlloc.pNext = NULL;
    memAlloc.allocationSize = 0;
    memAlloc.memoryTypeIndex = 0;

    vkGetImageMemoryRequirements(m_device->device(), srcImage, &memReqs);
    memAlloc.allocationSize = memReqs.size;
    pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &memAlloc, 0);
    ASSERT_TRUE(pass);
    err = vkAllocateMemory(m_device->device(), &memAlloc, NULL, &srcMem);
    ASSERT_VK_SUCCESS(err);

    vkGetImageMemoryRequirements(m_device->device(), dstImage, &memReqs);
    memAlloc.allocationSize = memReqs.size;
    pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &memAlloc, 0);
    ASSERT_TRUE(pass);
    err = vkAllocateMemory(m_device->device(), &memAlloc, NULL, &destMem);
    ASSERT_VK_SUCCESS(err);

    err = vkBindImageMemory(m_device->device(), srcImage, srcMem, 0);
    ASSERT_VK_SUCCESS(err);
    err = vkBindImageMemory(m_device->device(), dstImage, destMem, 0);
    ASSERT_VK_SUCCESS(err);

    BeginCommandBuffer();
    // Need memory barrier to VK_IMAGE_LAYOUT_GENERAL for source and dest?
    // VK_IMAGE_LAYOUT_UNDEFINED = 0,
    // VK_IMAGE_LAYOUT_GENERAL = 1,
    VkImageResolve resolveRegion;
    resolveRegion.srcSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    resolveRegion.srcSubresource.mipLevel = 0;
    resolveRegion.srcSubresource.baseArrayLayer = 0;
    resolveRegion.srcSubresource.layerCount = 0;
    resolveRegion.srcOffset.x = 0;
    resolveRegion.srcOffset.y = 0;
    resolveRegion.srcOffset.z = 0;
    resolveRegion.dstSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    resolveRegion.dstSubresource.mipLevel = 0;
    resolveRegion.dstSubresource.baseArrayLayer = 0;
    resolveRegion.dstSubresource.layerCount = 0;
    resolveRegion.dstOffset.x = 0;
    resolveRegion.dstOffset.y = 0;
    resolveRegion.dstOffset.z = 0;
    resolveRegion.extent.width = 1;
    resolveRegion.extent.height = 1;
    resolveRegion.extent.depth = 1;
    m_commandBuffer->ResolveImage(srcImage, VK_IMAGE_LAYOUT_GENERAL, dstImage,
                                  VK_IMAGE_LAYOUT_GENERAL, 1, &resolveRegion);
    EndCommandBuffer();

    m_errorMonitor->VerifyFound();

    vkDestroyImage(m_device->device(), srcImage, NULL);
    vkDestroyImage(m_device->device(), dstImage, NULL);
    vkFreeMemory(m_device->device(), srcMem, NULL);
    vkFreeMemory(m_device->device(), destMem, NULL);
}

TEST_F(VkLayerTest, ResolveImageHighSampleCount) {
    VkResult err;
    bool pass;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCmdResolveImage called with dest sample count greater than 1.");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Create two images of sample count 4 and try to Resolve between them
    VkImage srcImage;
    VkImage dstImage;
    VkDeviceMemory srcMem;
    VkDeviceMemory destMem;
    VkMemoryRequirements memReqs;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = VK_FORMAT_B8G8R8A8_UNORM;
    image_create_info.extent.width = 32;
    image_create_info.extent.height = 1;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_4_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_OPTIMAL;
    // Note: Some implementations expect color attachment usage for any
    // multisample surface
    image_create_info.usage =
        VK_IMAGE_USAGE_TRANSFER_SRC_BIT | VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT;
    image_create_info.flags = 0;

    err =
        vkCreateImage(m_device->device(), &image_create_info, NULL, &srcImage);
    ASSERT_VK_SUCCESS(err);

    // Note: Some implementations expect color attachment usage for any
    // multisample surface
    image_create_info.usage =
        VK_IMAGE_USAGE_TRANSFER_DST_BIT | VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT;

    err =
        vkCreateImage(m_device->device(), &image_create_info, NULL, &dstImage);
    ASSERT_VK_SUCCESS(err);

    // Allocate memory
    VkMemoryAllocateInfo memAlloc = {};
    memAlloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    memAlloc.pNext = NULL;
    memAlloc.allocationSize = 0;
    memAlloc.memoryTypeIndex = 0;

    vkGetImageMemoryRequirements(m_device->device(), srcImage, &memReqs);
    memAlloc.allocationSize = memReqs.size;
    pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &memAlloc, 0);
    ASSERT_TRUE(pass);
    err = vkAllocateMemory(m_device->device(), &memAlloc, NULL, &srcMem);
    ASSERT_VK_SUCCESS(err);

    vkGetImageMemoryRequirements(m_device->device(), dstImage, &memReqs);
    memAlloc.allocationSize = memReqs.size;
    pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &memAlloc, 0);
    ASSERT_TRUE(pass);
    err = vkAllocateMemory(m_device->device(), &memAlloc, NULL, &destMem);
    ASSERT_VK_SUCCESS(err);

    err = vkBindImageMemory(m_device->device(), srcImage, srcMem, 0);
    ASSERT_VK_SUCCESS(err);
    err = vkBindImageMemory(m_device->device(), dstImage, destMem, 0);
    ASSERT_VK_SUCCESS(err);

    BeginCommandBuffer();
    // Need memory barrier to VK_IMAGE_LAYOUT_GENERAL for source and dest?
    // VK_IMAGE_LAYOUT_UNDEFINED = 0,
    // VK_IMAGE_LAYOUT_GENERAL = 1,
    VkImageResolve resolveRegion;
    resolveRegion.srcSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    resolveRegion.srcSubresource.mipLevel = 0;
    resolveRegion.srcSubresource.baseArrayLayer = 0;
    resolveRegion.srcSubresource.layerCount = 0;
    resolveRegion.srcOffset.x = 0;
    resolveRegion.srcOffset.y = 0;
    resolveRegion.srcOffset.z = 0;
    resolveRegion.dstSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    resolveRegion.dstSubresource.mipLevel = 0;
    resolveRegion.dstSubresource.baseArrayLayer = 0;
    resolveRegion.dstSubresource.layerCount = 0;
    resolveRegion.dstOffset.x = 0;
    resolveRegion.dstOffset.y = 0;
    resolveRegion.dstOffset.z = 0;
    resolveRegion.extent.width = 1;
    resolveRegion.extent.height = 1;
    resolveRegion.extent.depth = 1;
    m_commandBuffer->ResolveImage(srcImage, VK_IMAGE_LAYOUT_GENERAL, dstImage,
                                  VK_IMAGE_LAYOUT_GENERAL, 1, &resolveRegion);
    EndCommandBuffer();

    m_errorMonitor->VerifyFound();

    vkDestroyImage(m_device->device(), srcImage, NULL);
    vkDestroyImage(m_device->device(), dstImage, NULL);
    vkFreeMemory(m_device->device(), srcMem, NULL);
    vkFreeMemory(m_device->device(), destMem, NULL);
}

TEST_F(VkLayerTest, ResolveImageFormatMismatch) {
    VkResult err;
    bool pass;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCmdResolveImage called with unmatched source and dest formats.");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Create two images of different types and try to copy between them
    VkImage srcImage;
    VkImage dstImage;
    VkDeviceMemory srcMem;
    VkDeviceMemory destMem;
    VkMemoryRequirements memReqs;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = VK_FORMAT_B8G8R8A8_UNORM;
    image_create_info.extent.width = 32;
    image_create_info.extent.height = 1;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_2_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_OPTIMAL;
    // Note: Some implementations expect color attachment usage for any
    // multisample surface
    image_create_info.usage =
        VK_IMAGE_USAGE_TRANSFER_SRC_BIT | VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT;
    image_create_info.flags = 0;

    err =
        vkCreateImage(m_device->device(), &image_create_info, NULL, &srcImage);
    ASSERT_VK_SUCCESS(err);

    // Set format to something other than source image
    image_create_info.format = VK_FORMAT_R32_SFLOAT;
    // Note: Some implementations expect color attachment usage for any
    // multisample surface
    image_create_info.usage =
        VK_IMAGE_USAGE_TRANSFER_DST_BIT | VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;

    err =
        vkCreateImage(m_device->device(), &image_create_info, NULL, &dstImage);
    ASSERT_VK_SUCCESS(err);

    // Allocate memory
    VkMemoryAllocateInfo memAlloc = {};
    memAlloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    memAlloc.pNext = NULL;
    memAlloc.allocationSize = 0;
    memAlloc.memoryTypeIndex = 0;

    vkGetImageMemoryRequirements(m_device->device(), srcImage, &memReqs);
    memAlloc.allocationSize = memReqs.size;
    pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &memAlloc, 0);
    ASSERT_TRUE(pass);
    err = vkAllocateMemory(m_device->device(), &memAlloc, NULL, &srcMem);
    ASSERT_VK_SUCCESS(err);

    vkGetImageMemoryRequirements(m_device->device(), dstImage, &memReqs);
    memAlloc.allocationSize = memReqs.size;
    pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &memAlloc, 0);
    ASSERT_TRUE(pass);
    err = vkAllocateMemory(m_device->device(), &memAlloc, NULL, &destMem);
    ASSERT_VK_SUCCESS(err);

    err = vkBindImageMemory(m_device->device(), srcImage, srcMem, 0);
    ASSERT_VK_SUCCESS(err);
    err = vkBindImageMemory(m_device->device(), dstImage, destMem, 0);
    ASSERT_VK_SUCCESS(err);

    BeginCommandBuffer();
    // Need memory barrier to VK_IMAGE_LAYOUT_GENERAL for source and dest?
    // VK_IMAGE_LAYOUT_UNDEFINED = 0,
    // VK_IMAGE_LAYOUT_GENERAL = 1,
    VkImageResolve resolveRegion;
    resolveRegion.srcSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    resolveRegion.srcSubresource.mipLevel = 0;
    resolveRegion.srcSubresource.baseArrayLayer = 0;
    resolveRegion.srcSubresource.layerCount = 0;
    resolveRegion.srcOffset.x = 0;
    resolveRegion.srcOffset.y = 0;
    resolveRegion.srcOffset.z = 0;
    resolveRegion.dstSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    resolveRegion.dstSubresource.mipLevel = 0;
    resolveRegion.dstSubresource.baseArrayLayer = 0;
    resolveRegion.dstSubresource.layerCount = 0;
    resolveRegion.dstOffset.x = 0;
    resolveRegion.dstOffset.y = 0;
    resolveRegion.dstOffset.z = 0;
    resolveRegion.extent.width = 1;
    resolveRegion.extent.height = 1;
    resolveRegion.extent.depth = 1;
    m_commandBuffer->ResolveImage(srcImage, VK_IMAGE_LAYOUT_GENERAL, dstImage,
                                  VK_IMAGE_LAYOUT_GENERAL, 1, &resolveRegion);
    EndCommandBuffer();

    m_errorMonitor->VerifyFound();

    vkDestroyImage(m_device->device(), srcImage, NULL);
    vkDestroyImage(m_device->device(), dstImage, NULL);
    vkFreeMemory(m_device->device(), srcMem, NULL);
    vkFreeMemory(m_device->device(), destMem, NULL);
}

TEST_F(VkLayerTest, ResolveImageTypeMismatch) {
    VkResult err;
    bool pass;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCmdResolveImage called with unmatched source and dest image types.");

    ASSERT_NO_FATAL_FAILURE(InitState());

    // Create two images of different types and try to copy between them
    VkImage srcImage;
    VkImage dstImage;
    VkDeviceMemory srcMem;
    VkDeviceMemory destMem;
    VkMemoryRequirements memReqs;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = VK_FORMAT_B8G8R8A8_UNORM;
    image_create_info.extent.width = 32;
    image_create_info.extent.height = 1;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_2_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_OPTIMAL;
    // Note: Some implementations expect color attachment usage for any
    // multisample surface
    image_create_info.usage =
        VK_IMAGE_USAGE_TRANSFER_SRC_BIT | VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT;
    image_create_info.flags = 0;

    err =
        vkCreateImage(m_device->device(), &image_create_info, NULL, &srcImage);
    ASSERT_VK_SUCCESS(err);

    image_create_info.imageType = VK_IMAGE_TYPE_1D;
    // Note: Some implementations expect color attachment usage for any
    // multisample surface
    image_create_info.usage =
        VK_IMAGE_USAGE_TRANSFER_DST_BIT | VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;

    err =
        vkCreateImage(m_device->device(), &image_create_info, NULL, &dstImage);
    ASSERT_VK_SUCCESS(err);

    // Allocate memory
    VkMemoryAllocateInfo memAlloc = {};
    memAlloc.sType = VK_STRUCTURE_TYPE_MEMORY_ALLOCATE_INFO;
    memAlloc.pNext = NULL;
    memAlloc.allocationSize = 0;
    memAlloc.memoryTypeIndex = 0;

    vkGetImageMemoryRequirements(m_device->device(), srcImage, &memReqs);
    memAlloc.allocationSize = memReqs.size;
    pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &memAlloc, 0);
    ASSERT_TRUE(pass);
    err = vkAllocateMemory(m_device->device(), &memAlloc, NULL, &srcMem);
    ASSERT_VK_SUCCESS(err);

    vkGetImageMemoryRequirements(m_device->device(), dstImage, &memReqs);
    memAlloc.allocationSize = memReqs.size;
    pass =
        m_device->phy().set_memory_type(memReqs.memoryTypeBits, &memAlloc, 0);
    ASSERT_TRUE(pass);
    err = vkAllocateMemory(m_device->device(), &memAlloc, NULL, &destMem);
    ASSERT_VK_SUCCESS(err);

    err = vkBindImageMemory(m_device->device(), srcImage, srcMem, 0);
    ASSERT_VK_SUCCESS(err);
    err = vkBindImageMemory(m_device->device(), dstImage, destMem, 0);
    ASSERT_VK_SUCCESS(err);

    BeginCommandBuffer();
    // Need memory barrier to VK_IMAGE_LAYOUT_GENERAL for source and dest?
    // VK_IMAGE_LAYOUT_UNDEFINED = 0,
    // VK_IMAGE_LAYOUT_GENERAL = 1,
    VkImageResolve resolveRegion;
    resolveRegion.srcSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    resolveRegion.srcSubresource.mipLevel = 0;
    resolveRegion.srcSubresource.baseArrayLayer = 0;
    resolveRegion.srcSubresource.layerCount = 0;
    resolveRegion.srcOffset.x = 0;
    resolveRegion.srcOffset.y = 0;
    resolveRegion.srcOffset.z = 0;
    resolveRegion.dstSubresource.aspectMask = VK_IMAGE_ASPECT_COLOR_BIT;
    resolveRegion.dstSubresource.mipLevel = 0;
    resolveRegion.dstSubresource.baseArrayLayer = 0;
    resolveRegion.dstSubresource.layerCount = 0;
    resolveRegion.dstOffset.x = 0;
    resolveRegion.dstOffset.y = 0;
    resolveRegion.dstOffset.z = 0;
    resolveRegion.extent.width = 1;
    resolveRegion.extent.height = 1;
    resolveRegion.extent.depth = 1;
    m_commandBuffer->ResolveImage(srcImage, VK_IMAGE_LAYOUT_GENERAL, dstImage,
                                  VK_IMAGE_LAYOUT_GENERAL, 1, &resolveRegion);
    EndCommandBuffer();

    m_errorMonitor->VerifyFound();

    vkDestroyImage(m_device->device(), srcImage, NULL);
    vkDestroyImage(m_device->device(), dstImage, NULL);
    vkFreeMemory(m_device->device(), srcMem, NULL);
    vkFreeMemory(m_device->device(), destMem, NULL);
}

TEST_F(VkLayerTest, DepthStencilImageViewWithColorAspectBitError) {
    // Create a single Image descriptor and cause it to first hit an error due
    //  to using a DS format, then cause it to hit error due to COLOR_BIT not
    //  set in aspect
    // The image format check comes 2nd in validation so we trigger it first,
    //  then when we cause aspect fail next, bad format check will be preempted
    VkResult err;

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "Combination depth/stencil image formats can have only the ");

    ASSERT_NO_FATAL_FAILURE(InitState());

    VkDescriptorPoolSize ds_type_count = {};
    ds_type_count.type = VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE;
    ds_type_count.descriptorCount = 1;

    VkDescriptorPoolCreateInfo ds_pool_ci = {};
    ds_pool_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_POOL_CREATE_INFO;
    ds_pool_ci.pNext = NULL;
    ds_pool_ci.maxSets = 1;
    ds_pool_ci.poolSizeCount = 1;
    ds_pool_ci.pPoolSizes = &ds_type_count;

    VkDescriptorPool ds_pool;
    err =
        vkCreateDescriptorPool(m_device->device(), &ds_pool_ci, NULL, &ds_pool);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSetLayoutBinding dsl_binding = {};
    dsl_binding.binding = 0;
    dsl_binding.descriptorType = VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE;
    dsl_binding.descriptorCount = 1;
    dsl_binding.stageFlags = VK_SHADER_STAGE_ALL;
    dsl_binding.pImmutableSamplers = NULL;

    VkDescriptorSetLayoutCreateInfo ds_layout_ci = {};
    ds_layout_ci.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_LAYOUT_CREATE_INFO;
    ds_layout_ci.pNext = NULL;
    ds_layout_ci.bindingCount = 1;
    ds_layout_ci.pBindings = &dsl_binding;
    VkDescriptorSetLayout ds_layout;
    err = vkCreateDescriptorSetLayout(m_device->device(), &ds_layout_ci, NULL,
                                      &ds_layout);
    ASSERT_VK_SUCCESS(err);

    VkDescriptorSet descriptorSet;
    VkDescriptorSetAllocateInfo alloc_info = {};
    alloc_info.sType = VK_STRUCTURE_TYPE_DESCRIPTOR_SET_ALLOCATE_INFO;
    alloc_info.descriptorSetCount = 1;
    alloc_info.descriptorPool = ds_pool;
    alloc_info.pSetLayouts = &ds_layout;
    err = vkAllocateDescriptorSets(m_device->device(), &alloc_info,
                                   &descriptorSet);
    ASSERT_VK_SUCCESS(err);

    VkImage image_bad;
    VkImage image_good;
    // One bad format and one good format for Color attachment
    const VkFormat tex_format_bad = VK_FORMAT_D24_UNORM_S8_UINT;
    const VkFormat tex_format_good = VK_FORMAT_B8G8R8A8_UNORM;
    const int32_t tex_width = 32;
    const int32_t tex_height = 32;

    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = tex_format_bad;
    image_create_info.extent.width = tex_width;
    image_create_info.extent.height = tex_height;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_OPTIMAL;
    image_create_info.usage = VK_IMAGE_USAGE_SAMPLED_BIT |
                              VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT;
    image_create_info.flags = 0;

    err =
        vkCreateImage(m_device->device(), &image_create_info, NULL, &image_bad);
    ASSERT_VK_SUCCESS(err);
    image_create_info.format = tex_format_good;
    image_create_info.usage =
        VK_IMAGE_USAGE_SAMPLED_BIT | VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT;
    err = vkCreateImage(m_device->device(), &image_create_info, NULL,
                        &image_good);
    ASSERT_VK_SUCCESS(err);

    VkImageViewCreateInfo image_view_create_info = {};
    image_view_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_view_create_info.image = image_bad;
    image_view_create_info.viewType = VK_IMAGE_VIEW_TYPE_2D;
    image_view_create_info.format = tex_format_bad;
    image_view_create_info.subresourceRange.baseArrayLayer = 0;
    image_view_create_info.subresourceRange.baseMipLevel = 0;
    image_view_create_info.subresourceRange.layerCount = 1;
    image_view_create_info.subresourceRange.levelCount = 1;
    image_view_create_info.subresourceRange.aspectMask =
        VK_IMAGE_ASPECT_COLOR_BIT;

    VkImageView view;
    err = vkCreateImageView(m_device->device(), &image_view_create_info, NULL,
                            &view);

    m_errorMonitor->VerifyFound();

    vkDestroyImage(m_device->device(), image_bad, NULL);
    vkDestroyImage(m_device->device(), image_good, NULL);
    vkDestroyDescriptorSetLayout(m_device->device(), ds_layout, NULL);
    vkDestroyDescriptorPool(m_device->device(), ds_pool, NULL);
}

TEST_F(VkLayerTest, ClearImageErrors) {
    TEST_DESCRIPTION("Call ClearColorImage w/ a depth|stencil image and "
                     "ClearDepthStencilImage with a color image.");

    ASSERT_NO_FATAL_FAILURE(InitState());
    ASSERT_NO_FATAL_FAILURE(InitRenderTarget());

    // Renderpass is started here so end it as Clear cmds can't be in renderpass
    BeginCommandBuffer();
    m_commandBuffer->EndRenderPass();

    // Color image
    VkClearColorValue clear_color;
    memset(clear_color.uint32, 0, sizeof(uint32_t) * 4);
    VkMemoryPropertyFlags reqs = VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT;
    const VkFormat color_format = VK_FORMAT_B8G8R8A8_UNORM;
    const int32_t img_width = 32;
    const int32_t img_height = 32;
    VkImageCreateInfo image_create_info = {};
    image_create_info.sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO;
    image_create_info.pNext = NULL;
    image_create_info.imageType = VK_IMAGE_TYPE_2D;
    image_create_info.format = color_format;
    image_create_info.extent.width = img_width;
    image_create_info.extent.height = img_height;
    image_create_info.extent.depth = 1;
    image_create_info.mipLevels = 1;
    image_create_info.arrayLayers = 1;
    image_create_info.samples = VK_SAMPLE_COUNT_1_BIT;
    image_create_info.tiling = VK_IMAGE_TILING_LINEAR;
    image_create_info.usage = VK_IMAGE_USAGE_SAMPLED_BIT;

    vk_testing::Image color_image;
    color_image.init(*m_device, (const VkImageCreateInfo &)image_create_info,
                     reqs);

    const VkImageSubresourceRange color_range =
        vk_testing::Image::subresource_range(image_create_info,
                                             VK_IMAGE_ASPECT_COLOR_BIT);

    // Depth/Stencil image
    VkClearDepthStencilValue clear_value = {0};
    reqs = 0; // don't need HOST_VISIBLE DS image
    VkImageCreateInfo ds_image_create_info = vk_testing::Image::create_info();
    ds_image_create_info.imageType = VK_IMAGE_TYPE_2D;
    ds_image_create_info.format = VK_FORMAT_D24_UNORM_S8_UINT;
    ds_image_create_info.extent.width = 64;
    ds_image_create_info.extent.height = 64;
    ds_image_create_info.tiling = VK_IMAGE_TILING_OPTIMAL;
    ds_image_create_info.usage = VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT;

    vk_testing::Image ds_image;
    ds_image.init(*m_device, (const VkImageCreateInfo &)ds_image_create_info,
                  reqs);

    const VkImageSubresourceRange ds_range =
        vk_testing::Image::subresource_range(ds_image_create_info,
                                             VK_IMAGE_ASPECT_DEPTH_BIT);

    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCmdClearColorImage called with depth/stencil image.");

    vkCmdClearColorImage(m_commandBuffer->GetBufferHandle(), ds_image.handle(),
                         VK_IMAGE_LAYOUT_GENERAL, &clear_color, 1,
                         &color_range);

    m_errorMonitor->VerifyFound();

    m_errorMonitor->SetDesiredFailureMsg(VK_DEBUG_REPORT_ERROR_BIT_EXT,
                                         "vkCmdClearColorImage called with "
                                         "image created without "
                                         "VK_IMAGE_USAGE_TRANSFER_DST_BIT");

    vkCmdClearColorImage(m_commandBuffer->GetBufferHandle(), ds_image.handle(),
                         VK_IMAGE_LAYOUT_GENERAL, &clear_color, 1,
                         &color_range);

    m_errorMonitor->VerifyFound();

    // Call CmdClearDepthStencilImage with color image
    m_errorMonitor->SetDesiredFailureMsg(
        VK_DEBUG_REPORT_ERROR_BIT_EXT,
        "vkCmdClearDepthStencilImage called without a depth/stencil image.");

    vkCmdClearDepthStencilImage(
        m_commandBuffer->GetBufferHandle(), color_image.handle(),
        VK_IMAGE_LAYOUT_DEPTH_STENCIL_ATTACHMENT_OPTIMAL, &clear_value, 1,
        &ds_range);

    m_errorMonitor->VerifyFound();
}
#endif // IMAGE_TESTS

int main(int argc, char **argv) {
    int result;

#ifdef ANDROID
    int vulkanSupport = InitVulkan();
    if (vulkanSupport == 0)
        return 1;
#endif

    ::testing::InitGoogleTest(&argc, argv);
    VkTestFramework::InitArgs(&argc, argv);

    ::testing::AddGlobalTestEnvironment(new TestEnvironment);

    result = RUN_ALL_TESTS();

    VkTestFramework::Finish();
    return result;
}