blob: d1cc5791476bc39c700f9ab0913eb5f3e50d1bda [file] [log] [blame]
Linus Walleije8689e62010-09-28 15:57:37 +02001/*
2 * Copyright (c) 2006 ARM Ltd.
3 * Copyright (c) 2010 ST-Ericsson SA
4 *
5 * Author: Peter Pearse <peter.pearse@arm.com>
6 * Author: Linus Walleij <linus.walleij@stericsson.com>
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the Free
10 * Software Foundation; either version 2 of the License, or (at your option)
11 * any later version.
12 *
13 * This program is distributed in the hope that it will be useful, but WITHOUT
14 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 * more details.
17 *
18 * You should have received a copy of the GNU General Public License along with
19 * this program; if not, write to the Free Software Foundation, Inc., 59
20 * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
21 *
Russell King - ARM Linux94ae8522011-01-16 20:18:05 +000022 * The full GNU General Public License is in this distribution in the file
23 * called COPYING.
Linus Walleije8689e62010-09-28 15:57:37 +020024 *
25 * Documentation: ARM DDI 0196G == PL080
Russell King - ARM Linux94ae8522011-01-16 20:18:05 +000026 * Documentation: ARM DDI 0218E == PL081
Linus Walleije8689e62010-09-28 15:57:37 +020027 *
Russell King - ARM Linux94ae8522011-01-16 20:18:05 +000028 * PL080 & PL081 both have 16 sets of DMA signals that can be routed to any
29 * channel.
Linus Walleije8689e62010-09-28 15:57:37 +020030 *
31 * The PL080 has 8 channels available for simultaneous use, and the PL081
32 * has only two channels. So on these DMA controllers the number of channels
33 * and the number of incoming DMA signals are two totally different things.
34 * It is usually not possible to theoretically handle all physical signals,
35 * so a multiplexing scheme with possible denial of use is necessary.
36 *
37 * The PL080 has a dual bus master, PL081 has a single master.
38 *
39 * Memory to peripheral transfer may be visualized as
40 * Get data from memory to DMAC
41 * Until no data left
42 * On burst request from peripheral
43 * Destination burst from DMAC to peripheral
44 * Clear burst request
45 * Raise terminal count interrupt
46 *
47 * For peripherals with a FIFO:
48 * Source burst size == half the depth of the peripheral FIFO
49 * Destination burst size == the depth of the peripheral FIFO
50 *
51 * (Bursts are irrelevant for mem to mem transfers - there are no burst
52 * signals, the DMA controller will simply facilitate its AHB master.)
53 *
54 * ASSUMES default (little) endianness for DMA transfers
55 *
Russell King - ARM Linux9dc2c202011-01-03 22:33:06 +000056 * The PL08x has two flow control settings:
57 * - DMAC flow control: the transfer size defines the number of transfers
58 * which occur for the current LLI entry, and the DMAC raises TC at the
59 * end of every LLI entry. Observed behaviour shows the DMAC listening
60 * to both the BREQ and SREQ signals (contrary to documented),
61 * transferring data if either is active. The LBREQ and LSREQ signals
62 * are ignored.
63 *
64 * - Peripheral flow control: the transfer size is ignored (and should be
65 * zero). The data is transferred from the current LLI entry, until
66 * after the final transfer signalled by LBREQ or LSREQ. The DMAC
67 * will then move to the next LLI entry.
68 *
Linus Walleije8689e62010-09-28 15:57:37 +020069 * Global TODO:
70 * - Break out common code from arch/arm/mach-s3c64xx and share
71 */
Russell King - ARM Linux730404a2011-01-03 22:34:07 +000072#include <linux/amba/bus.h>
Linus Walleije8689e62010-09-28 15:57:37 +020073#include <linux/amba/pl08x.h>
74#include <linux/debugfs.h>
Viresh Kumar0c38d702011-08-05 15:32:28 +053075#include <linux/delay.h>
76#include <linux/device.h>
77#include <linux/dmaengine.h>
78#include <linux/dmapool.h>
Vinod Koul8516f522011-09-02 16:43:44 +053079#include <linux/dma-mapping.h>
Viresh Kumar0c38d702011-08-05 15:32:28 +053080#include <linux/init.h>
81#include <linux/interrupt.h>
82#include <linux/module.h>
Viresh Kumarb7b60182011-08-05 15:32:33 +053083#include <linux/pm_runtime.h>
Linus Walleije8689e62010-09-28 15:57:37 +020084#include <linux/seq_file.h>
Viresh Kumar0c38d702011-08-05 15:32:28 +053085#include <linux/slab.h>
Linus Walleije8689e62010-09-28 15:57:37 +020086#include <asm/hardware/pl080.h>
Linus Walleije8689e62010-09-28 15:57:37 +020087
Russell King - ARM Linuxd2ebfb32012-03-06 22:34:26 +000088#include "dmaengine.h"
Russell King01d8dc62012-05-26 14:04:29 +010089#include "virt-dma.h"
Russell King - ARM Linuxd2ebfb32012-03-06 22:34:26 +000090
Linus Walleije8689e62010-09-28 15:57:37 +020091#define DRIVER_NAME "pl08xdmac"
92
Russell King - ARM Linux7703eac2011-08-31 09:34:35 +010093static struct amba_driver pl08x_amba_driver;
Russell Kingb23f2042012-05-16 10:48:44 +010094struct pl08x_driver_data;
Russell King - ARM Linux7703eac2011-08-31 09:34:35 +010095
Linus Walleije8689e62010-09-28 15:57:37 +020096/**
Russell King - ARM Linux94ae8522011-01-16 20:18:05 +000097 * struct vendor_data - vendor-specific config parameters for PL08x derivatives
Linus Walleije8689e62010-09-28 15:57:37 +020098 * @channels: the number of channels available in this variant
Russell King - ARM Linux94ae8522011-01-16 20:18:05 +000099 * @dualmaster: whether this version supports dual AHB masters or not.
Linus Walleijaffa1152012-04-12 09:01:49 +0200100 * @nomadik: whether the channels have Nomadik security extension bits
101 * that need to be checked for permission before use and some registers are
102 * missing
Linus Walleije8689e62010-09-28 15:57:37 +0200103 */
104struct vendor_data {
Linus Walleije8689e62010-09-28 15:57:37 +0200105 u8 channels;
106 bool dualmaster;
Linus Walleijaffa1152012-04-12 09:01:49 +0200107 bool nomadik;
Linus Walleije8689e62010-09-28 15:57:37 +0200108};
109
110/*
111 * PL08X private data structures
Russell King - ARM Linuxe8b5e112011-01-03 22:30:24 +0000112 * An LLI struct - see PL08x TRM. Note that next uses bit[0] as a bus bit,
Russell King - ARM Linuxe25761d2011-01-03 22:37:52 +0000113 * start & end do not - their bus bit info is in cctl. Also note that these
114 * are fixed 32-bit quantities.
Linus Walleije8689e62010-09-28 15:57:37 +0200115 */
Russell King - ARM Linux7cb72ad2011-01-03 22:35:28 +0000116struct pl08x_lli {
Russell King - ARM Linuxe25761d2011-01-03 22:37:52 +0000117 u32 src;
118 u32 dst;
Russell King - ARM Linuxbfddfb42011-01-03 22:38:12 +0000119 u32 lli;
Linus Walleije8689e62010-09-28 15:57:37 +0200120 u32 cctl;
121};
122
123/**
Russell Kingb23f2042012-05-16 10:48:44 +0100124 * struct pl08x_bus_data - information of source or destination
125 * busses for a transfer
126 * @addr: current address
127 * @maxwidth: the maximum width of a transfer on this bus
128 * @buswidth: the width of this bus in bytes: 1, 2 or 4
129 */
130struct pl08x_bus_data {
131 dma_addr_t addr;
132 u8 maxwidth;
133 u8 buswidth;
134};
135
136/**
137 * struct pl08x_phy_chan - holder for the physical channels
138 * @id: physical index to this channel
139 * @lock: a lock to use when altering an instance of this struct
Russell Kingb23f2042012-05-16 10:48:44 +0100140 * @serving: the virtual channel currently being served by this physical
141 * channel
Russell Kingad0de2a2012-05-25 11:15:15 +0100142 * @locked: channel unavailable for the system, e.g. dedicated to secure
143 * world
Russell Kingb23f2042012-05-16 10:48:44 +0100144 */
145struct pl08x_phy_chan {
146 unsigned int id;
147 void __iomem *base;
148 spinlock_t lock;
Russell Kingb23f2042012-05-16 10:48:44 +0100149 struct pl08x_dma_chan *serving;
Russell Kingad0de2a2012-05-25 11:15:15 +0100150 bool locked;
Russell Kingb23f2042012-05-16 10:48:44 +0100151};
152
153/**
154 * struct pl08x_sg - structure containing data per sg
155 * @src_addr: src address of sg
156 * @dst_addr: dst address of sg
157 * @len: transfer len in bytes
158 * @node: node for txd's dsg_list
159 */
160struct pl08x_sg {
161 dma_addr_t src_addr;
162 dma_addr_t dst_addr;
163 size_t len;
164 struct list_head node;
165};
166
167/**
168 * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor
Russell King01d8dc62012-05-26 14:04:29 +0100169 * @vd: virtual DMA descriptor
Russell Kingb23f2042012-05-16 10:48:44 +0100170 * @dsg_list: list of children sg's
Russell Kingb23f2042012-05-16 10:48:44 +0100171 * @llis_bus: DMA memory address (physical) start for the LLIs
172 * @llis_va: virtual memory address start for the LLIs
173 * @cctl: control reg values for current txd
174 * @ccfg: config reg values for current txd
Russell King18536132012-05-26 14:42:23 +0100175 * @done: this marks completed descriptors, which should not have their
176 * mux released.
Russell Kingb23f2042012-05-16 10:48:44 +0100177 */
178struct pl08x_txd {
Russell King01d8dc62012-05-26 14:04:29 +0100179 struct virt_dma_desc vd;
Russell Kingb23f2042012-05-16 10:48:44 +0100180 struct list_head dsg_list;
Russell Kingb23f2042012-05-16 10:48:44 +0100181 dma_addr_t llis_bus;
182 struct pl08x_lli *llis_va;
183 /* Default cctl value for LLIs */
184 u32 cctl;
185 /*
186 * Settings to be put into the physical channel when we
187 * trigger this txd. Other registers are in llis_va[0].
188 */
189 u32 ccfg;
Russell King18536132012-05-26 14:42:23 +0100190 bool done;
Russell Kingb23f2042012-05-16 10:48:44 +0100191};
192
193/**
194 * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel
195 * states
196 * @PL08X_CHAN_IDLE: the channel is idle
197 * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport
198 * channel and is running a transfer on it
199 * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport
200 * channel, but the transfer is currently paused
201 * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport
202 * channel to become available (only pertains to memcpy channels)
203 */
204enum pl08x_dma_chan_state {
205 PL08X_CHAN_IDLE,
206 PL08X_CHAN_RUNNING,
207 PL08X_CHAN_PAUSED,
208 PL08X_CHAN_WAITING,
209};
210
211/**
212 * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel
Russell King01d8dc62012-05-26 14:04:29 +0100213 * @vc: wrappped virtual channel
Russell Kingb23f2042012-05-16 10:48:44 +0100214 * @phychan: the physical channel utilized by this channel, if there is one
Russell Kingb23f2042012-05-16 10:48:44 +0100215 * @name: name of channel
216 * @cd: channel platform data
217 * @runtime_addr: address for RX/TX according to the runtime config
Russell Kingb23f2042012-05-16 10:48:44 +0100218 * @at: active transaction on this channel
219 * @lock: a lock for this channel data
220 * @host: a pointer to the host (internal use)
221 * @state: whether the channel is idle, paused, running etc
222 * @slave: whether this channel is a device (slave) or for memcpy
Russell Kingad0de2a2012-05-25 11:15:15 +0100223 * @signal: the physical DMA request signal which this channel is using
Russell King5e2479b2012-05-25 11:32:45 +0100224 * @mux_use: count of descriptors using this DMA request signal setting
Russell Kingb23f2042012-05-16 10:48:44 +0100225 */
226struct pl08x_dma_chan {
Russell King01d8dc62012-05-26 14:04:29 +0100227 struct virt_dma_chan vc;
Russell Kingb23f2042012-05-16 10:48:44 +0100228 struct pl08x_phy_chan *phychan;
Russell King550ec362012-05-28 10:18:55 +0100229 const char *name;
Russell Kingb23f2042012-05-16 10:48:44 +0100230 const struct pl08x_channel_data *cd;
Russell Kinged91c132012-05-16 11:02:40 +0100231 struct dma_slave_config cfg;
Russell Kingb23f2042012-05-16 10:48:44 +0100232 struct pl08x_txd *at;
Russell Kingb23f2042012-05-16 10:48:44 +0100233 struct pl08x_driver_data *host;
234 enum pl08x_dma_chan_state state;
235 bool slave;
Russell Kingad0de2a2012-05-25 11:15:15 +0100236 int signal;
Russell King5e2479b2012-05-25 11:32:45 +0100237 unsigned mux_use;
Russell Kingb23f2042012-05-16 10:48:44 +0100238};
239
240/**
Linus Walleije8689e62010-09-28 15:57:37 +0200241 * struct pl08x_driver_data - the local state holder for the PL08x
242 * @slave: slave engine for this instance
243 * @memcpy: memcpy engine for this instance
244 * @base: virtual memory base (remapped) for the PL08x
245 * @adev: the corresponding AMBA (PrimeCell) bus entry
246 * @vd: vendor data for this PL08x variant
247 * @pd: platform data passed in from the platform/machine
248 * @phy_chans: array of data for the physical channels
249 * @pool: a pool for the LLI descriptors
Viresh Kumar3e27ee82011-08-05 15:32:27 +0530250 * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI
251 * fetches
Russell King - ARM Linux30749cb2011-01-03 22:41:13 +0000252 * @mem_buses: set to indicate memory transfers on AHB2.
Linus Walleije8689e62010-09-28 15:57:37 +0200253 * @lock: a spinlock for this struct
254 */
255struct pl08x_driver_data {
256 struct dma_device slave;
257 struct dma_device memcpy;
258 void __iomem *base;
259 struct amba_device *adev;
Russell King - ARM Linuxf96ca9ec2011-01-03 22:35:08 +0000260 const struct vendor_data *vd;
Linus Walleije8689e62010-09-28 15:57:37 +0200261 struct pl08x_platform_data *pd;
262 struct pl08x_phy_chan *phy_chans;
263 struct dma_pool *pool;
Russell King - ARM Linux30749cb2011-01-03 22:41:13 +0000264 u8 lli_buses;
265 u8 mem_buses;
Linus Walleije8689e62010-09-28 15:57:37 +0200266};
267
268/*
269 * PL08X specific defines
270 */
271
Linus Walleije8689e62010-09-28 15:57:37 +0200272/* Size (bytes) of each LLI buffer allocated for one transfer */
273# define PL08X_LLI_TSFR_SIZE 0x2000
274
Russell King - ARM Linuxe8b5e112011-01-03 22:30:24 +0000275/* Maximum times we call dma_pool_alloc on this pool without freeing */
Russell King - ARM Linux7cb72ad2011-01-03 22:35:28 +0000276#define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct pl08x_lli))
Linus Walleije8689e62010-09-28 15:57:37 +0200277#define PL08X_ALIGN 8
278
279static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan)
280{
Russell King01d8dc62012-05-26 14:04:29 +0100281 return container_of(chan, struct pl08x_dma_chan, vc.chan);
Linus Walleije8689e62010-09-28 15:57:37 +0200282}
283
Russell King - ARM Linux501e67e2011-01-03 22:44:57 +0000284static inline struct pl08x_txd *to_pl08x_txd(struct dma_async_tx_descriptor *tx)
285{
Russell King01d8dc62012-05-26 14:04:29 +0100286 return container_of(tx, struct pl08x_txd, vd.tx);
Russell King - ARM Linux501e67e2011-01-03 22:44:57 +0000287}
288
Linus Walleije8689e62010-09-28 15:57:37 +0200289/*
Russell King6b16c8b2012-05-25 11:10:58 +0100290 * Mux handling.
291 *
292 * This gives us the DMA request input to the PL08x primecell which the
293 * peripheral described by the channel data will be routed to, possibly
294 * via a board/SoC specific external MUX. One important point to note
295 * here is that this does not depend on the physical channel.
296 */
Russell Kingad0de2a2012-05-25 11:15:15 +0100297static int pl08x_request_mux(struct pl08x_dma_chan *plchan)
Russell King6b16c8b2012-05-25 11:10:58 +0100298{
299 const struct pl08x_platform_data *pd = plchan->host->pd;
300 int ret;
301
Russell King5e2479b2012-05-25 11:32:45 +0100302 if (plchan->mux_use++ == 0 && pd->get_signal) {
Russell King6b16c8b2012-05-25 11:10:58 +0100303 ret = pd->get_signal(plchan->cd);
Russell King5e2479b2012-05-25 11:32:45 +0100304 if (ret < 0) {
305 plchan->mux_use = 0;
Russell King6b16c8b2012-05-25 11:10:58 +0100306 return ret;
Russell King5e2479b2012-05-25 11:32:45 +0100307 }
Russell King6b16c8b2012-05-25 11:10:58 +0100308
Russell Kingad0de2a2012-05-25 11:15:15 +0100309 plchan->signal = ret;
Russell King6b16c8b2012-05-25 11:10:58 +0100310 }
311 return 0;
312}
313
314static void pl08x_release_mux(struct pl08x_dma_chan *plchan)
315{
316 const struct pl08x_platform_data *pd = plchan->host->pd;
317
Russell King5e2479b2012-05-25 11:32:45 +0100318 if (plchan->signal >= 0) {
319 WARN_ON(plchan->mux_use == 0);
320
321 if (--plchan->mux_use == 0 && pd->put_signal) {
322 pd->put_signal(plchan->cd, plchan->signal);
323 plchan->signal = -1;
324 }
Russell King6b16c8b2012-05-25 11:10:58 +0100325 }
326}
327
328/*
Linus Walleije8689e62010-09-28 15:57:37 +0200329 * Physical channel handling
330 */
331
332/* Whether a certain channel is busy or not */
333static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch)
334{
335 unsigned int val;
336
337 val = readl(ch->base + PL080_CH_CONFIG);
338 return val & PL080_CONFIG_ACTIVE;
339}
340
341/*
342 * Set the initial DMA register values i.e. those for the first LLI
Russell King - ARM Linuxe8b5e112011-01-03 22:30:24 +0000343 * The next LLI pointer and the configuration interrupt bit have
Russell King - ARM Linuxc885bee2011-01-03 22:38:52 +0000344 * been set when the LLIs were constructed. Poke them into the hardware
345 * and start the transfer.
Linus Walleije8689e62010-09-28 15:57:37 +0200346 */
Russell Kingeab82532012-05-25 12:32:00 +0100347static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan)
Linus Walleije8689e62010-09-28 15:57:37 +0200348{
Russell King - ARM Linuxc885bee2011-01-03 22:38:52 +0000349 struct pl08x_driver_data *pl08x = plchan->host;
Linus Walleije8689e62010-09-28 15:57:37 +0200350 struct pl08x_phy_chan *phychan = plchan->phychan;
Russell King879f1272012-05-26 14:27:40 +0100351 struct virt_dma_desc *vd = vchan_next_desc(&plchan->vc);
352 struct pl08x_txd *txd = to_pl08x_txd(&vd->tx);
Russell Kingeab82532012-05-25 12:32:00 +0100353 struct pl08x_lli *lli;
Russell King - ARM Linux09b3c322011-01-03 22:39:53 +0000354 u32 val;
Russell King - ARM Linuxc885bee2011-01-03 22:38:52 +0000355
Russell King879f1272012-05-26 14:27:40 +0100356 list_del(&txd->vd.node);
Russell Kingeab82532012-05-25 12:32:00 +0100357
Russell King - ARM Linuxc885bee2011-01-03 22:38:52 +0000358 plchan->at = txd;
Linus Walleije8689e62010-09-28 15:57:37 +0200359
Russell King - ARM Linuxc885bee2011-01-03 22:38:52 +0000360 /* Wait for channel inactive */
361 while (pl08x_phy_channel_busy(phychan))
Russell King - ARM Linux19386b322011-01-03 22:36:29 +0000362 cpu_relax();
Linus Walleije8689e62010-09-28 15:57:37 +0200363
Russell Kingeab82532012-05-25 12:32:00 +0100364 lli = &txd->llis_va[0];
365
Russell King - ARM Linuxc885bee2011-01-03 22:38:52 +0000366 dev_vdbg(&pl08x->adev->dev,
367 "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
Russell King - ARM Linux19524d72011-01-03 22:39:13 +0000368 "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n",
369 phychan->id, lli->src, lli->dst, lli->lli, lli->cctl,
Russell King - ARM Linux09b3c322011-01-03 22:39:53 +0000370 txd->ccfg);
Linus Walleije8689e62010-09-28 15:57:37 +0200371
Russell King - ARM Linux19524d72011-01-03 22:39:13 +0000372 writel(lli->src, phychan->base + PL080_CH_SRC_ADDR);
373 writel(lli->dst, phychan->base + PL080_CH_DST_ADDR);
374 writel(lli->lli, phychan->base + PL080_CH_LLI);
375 writel(lli->cctl, phychan->base + PL080_CH_CONTROL);
Russell King - ARM Linux09b3c322011-01-03 22:39:53 +0000376 writel(txd->ccfg, phychan->base + PL080_CH_CONFIG);
Russell King - ARM Linuxc885bee2011-01-03 22:38:52 +0000377
378 /* Enable the DMA channel */
379 /* Do not access config register until channel shows as disabled */
380 while (readl(pl08x->base + PL080_EN_CHAN) & (1 << phychan->id))
381 cpu_relax();
382
383 /* Do not access config register until channel shows as inactive */
384 val = readl(phychan->base + PL080_CH_CONFIG);
385 while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE))
386 val = readl(phychan->base + PL080_CH_CONFIG);
387
388 writel(val | PL080_CONFIG_ENABLE, phychan->base + PL080_CH_CONFIG);
Linus Walleije8689e62010-09-28 15:57:37 +0200389}
390
391/*
Russell King - ARM Linux81796612011-01-27 12:37:44 +0000392 * Pause the channel by setting the HALT bit.
Linus Walleije8689e62010-09-28 15:57:37 +0200393 *
Russell King - ARM Linux81796612011-01-27 12:37:44 +0000394 * For M->P transfers, pause the DMAC first and then stop the peripheral -
395 * the FIFO can only drain if the peripheral is still requesting data.
396 * (note: this can still timeout if the DMAC FIFO never drains of data.)
Linus Walleije8689e62010-09-28 15:57:37 +0200397 *
Russell King - ARM Linux81796612011-01-27 12:37:44 +0000398 * For P->M transfers, disable the peripheral first to stop it filling
399 * the DMAC FIFO, and then pause the DMAC.
Linus Walleije8689e62010-09-28 15:57:37 +0200400 */
401static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch)
402{
403 u32 val;
Russell King - ARM Linux81796612011-01-27 12:37:44 +0000404 int timeout;
Linus Walleije8689e62010-09-28 15:57:37 +0200405
406 /* Set the HALT bit and wait for the FIFO to drain */
407 val = readl(ch->base + PL080_CH_CONFIG);
408 val |= PL080_CONFIG_HALT;
409 writel(val, ch->base + PL080_CH_CONFIG);
410
411 /* Wait for channel inactive */
Russell King - ARM Linux81796612011-01-27 12:37:44 +0000412 for (timeout = 1000; timeout; timeout--) {
413 if (!pl08x_phy_channel_busy(ch))
414 break;
415 udelay(1);
416 }
417 if (pl08x_phy_channel_busy(ch))
418 pr_err("pl08x: channel%u timeout waiting for pause\n", ch->id);
Linus Walleije8689e62010-09-28 15:57:37 +0200419}
420
421static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
422{
423 u32 val;
424
425 /* Clear the HALT bit */
426 val = readl(ch->base + PL080_CH_CONFIG);
427 val &= ~PL080_CONFIG_HALT;
428 writel(val, ch->base + PL080_CH_CONFIG);
429}
430
Russell King - ARM Linuxfb526212011-01-27 12:32:53 +0000431/*
432 * pl08x_terminate_phy_chan() stops the channel, clears the FIFO and
433 * clears any pending interrupt status. This should not be used for
434 * an on-going transfer, but as a method of shutting down a channel
435 * (eg, when it's no longer used) or terminating a transfer.
436 */
437static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x,
438 struct pl08x_phy_chan *ch)
Linus Walleije8689e62010-09-28 15:57:37 +0200439{
Russell King - ARM Linuxfb526212011-01-27 12:32:53 +0000440 u32 val = readl(ch->base + PL080_CH_CONFIG);
Linus Walleije8689e62010-09-28 15:57:37 +0200441
Russell King - ARM Linuxfb526212011-01-27 12:32:53 +0000442 val &= ~(PL080_CONFIG_ENABLE | PL080_CONFIG_ERR_IRQ_MASK |
443 PL080_CONFIG_TC_IRQ_MASK);
Linus Walleije8689e62010-09-28 15:57:37 +0200444
Linus Walleije8689e62010-09-28 15:57:37 +0200445 writel(val, ch->base + PL080_CH_CONFIG);
Russell King - ARM Linuxfb526212011-01-27 12:32:53 +0000446
447 writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR);
448 writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR);
Linus Walleije8689e62010-09-28 15:57:37 +0200449}
450
451static inline u32 get_bytes_in_cctl(u32 cctl)
452{
453 /* The source width defines the number of bytes */
454 u32 bytes = cctl & PL080_CONTROL_TRANSFER_SIZE_MASK;
455
456 switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) {
457 case PL080_WIDTH_8BIT:
458 break;
459 case PL080_WIDTH_16BIT:
460 bytes *= 2;
461 break;
462 case PL080_WIDTH_32BIT:
463 bytes *= 4;
464 break;
465 }
466 return bytes;
467}
468
469/* The channel should be paused when calling this */
470static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
471{
472 struct pl08x_phy_chan *ch;
Linus Walleije8689e62010-09-28 15:57:37 +0200473 struct pl08x_txd *txd;
Russell King - ARM Linuxcace6582011-01-03 22:37:31 +0000474 size_t bytes = 0;
Linus Walleije8689e62010-09-28 15:57:37 +0200475
Linus Walleije8689e62010-09-28 15:57:37 +0200476 ch = plchan->phychan;
477 txd = plchan->at;
478
479 /*
Russell King - ARM Linuxdb9f1362011-01-03 22:38:32 +0000480 * Follow the LLIs to get the number of remaining
481 * bytes in the currently active transaction.
Linus Walleije8689e62010-09-28 15:57:37 +0200482 */
483 if (ch && txd) {
Russell King - ARM Linux4c0df6a2011-01-03 22:36:50 +0000484 u32 clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2;
Linus Walleije8689e62010-09-28 15:57:37 +0200485
Russell King - ARM Linuxdb9f1362011-01-03 22:38:32 +0000486 /* First get the remaining bytes in the active transfer */
Linus Walleije8689e62010-09-28 15:57:37 +0200487 bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL));
488
489 if (clli) {
Russell King - ARM Linuxdb9f1362011-01-03 22:38:32 +0000490 struct pl08x_lli *llis_va = txd->llis_va;
491 dma_addr_t llis_bus = txd->llis_bus;
492 int index;
Linus Walleije8689e62010-09-28 15:57:37 +0200493
Russell King - ARM Linuxdb9f1362011-01-03 22:38:32 +0000494 BUG_ON(clli < llis_bus || clli >= llis_bus +
495 sizeof(struct pl08x_lli) * MAX_NUM_TSFR_LLIS);
Linus Walleije8689e62010-09-28 15:57:37 +0200496
Russell King - ARM Linuxdb9f1362011-01-03 22:38:32 +0000497 /*
498 * Locate the next LLI - as this is an array,
499 * it's simple maths to find.
500 */
501 index = (clli - llis_bus) / sizeof(struct pl08x_lli);
502
503 for (; index < MAX_NUM_TSFR_LLIS; index++) {
504 bytes += get_bytes_in_cctl(llis_va[index].cctl);
505
Linus Walleije8689e62010-09-28 15:57:37 +0200506 /*
Russell King - ARM Linuxe8b5e112011-01-03 22:30:24 +0000507 * A LLI pointer of 0 terminates the LLI list
Linus Walleije8689e62010-09-28 15:57:37 +0200508 */
Russell King - ARM Linuxdb9f1362011-01-03 22:38:32 +0000509 if (!llis_va[index].lli)
510 break;
Linus Walleije8689e62010-09-28 15:57:37 +0200511 }
512 }
513 }
514
Linus Walleije8689e62010-09-28 15:57:37 +0200515 return bytes;
516}
517
518/*
519 * Allocate a physical channel for a virtual channel
Russell King - ARM Linux94ae8522011-01-16 20:18:05 +0000520 *
521 * Try to locate a physical channel to be used for this transfer. If all
522 * are taken return NULL and the requester will have to cope by using
523 * some fallback PIO mode or retrying later.
Linus Walleije8689e62010-09-28 15:57:37 +0200524 */
525static struct pl08x_phy_chan *
526pl08x_get_phy_channel(struct pl08x_driver_data *pl08x,
527 struct pl08x_dma_chan *virt_chan)
528{
529 struct pl08x_phy_chan *ch = NULL;
530 unsigned long flags;
531 int i;
532
Linus Walleije8689e62010-09-28 15:57:37 +0200533 for (i = 0; i < pl08x->vd->channels; i++) {
534 ch = &pl08x->phy_chans[i];
535
536 spin_lock_irqsave(&ch->lock, flags);
537
Linus Walleijaffa1152012-04-12 09:01:49 +0200538 if (!ch->locked && !ch->serving) {
Linus Walleije8689e62010-09-28 15:57:37 +0200539 ch->serving = virt_chan;
Linus Walleije8689e62010-09-28 15:57:37 +0200540 spin_unlock_irqrestore(&ch->lock, flags);
541 break;
542 }
543
544 spin_unlock_irqrestore(&ch->lock, flags);
545 }
546
547 if (i == pl08x->vd->channels) {
548 /* No physical channel available, cope with it */
549 return NULL;
550 }
551
552 return ch;
553}
554
Russell Kinga5a488d2012-05-26 13:54:15 +0100555/* Mark the physical channel as free. Note, this write is atomic. */
Linus Walleije8689e62010-09-28 15:57:37 +0200556static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x,
557 struct pl08x_phy_chan *ch)
558{
Linus Walleije8689e62010-09-28 15:57:37 +0200559 ch->serving = NULL;
Russell Kinga5a488d2012-05-26 13:54:15 +0100560}
561
562/*
563 * Try to allocate a physical channel. When successful, assign it to
564 * this virtual channel, and initiate the next descriptor. The
565 * virtual channel lock must be held at this point.
566 */
567static void pl08x_phy_alloc_and_start(struct pl08x_dma_chan *plchan)
568{
569 struct pl08x_driver_data *pl08x = plchan->host;
570 struct pl08x_phy_chan *ch;
571
572 ch = pl08x_get_phy_channel(pl08x, plchan);
573 if (!ch) {
574 dev_dbg(&pl08x->adev->dev, "no physical channel available for xfer on %s\n", plchan->name);
575 plchan->state = PL08X_CHAN_WAITING;
576 return;
577 }
578
579 dev_dbg(&pl08x->adev->dev, "allocated physical channel %d for xfer on %s\n",
580 ch->id, plchan->name);
581
582 plchan->phychan = ch;
583 plchan->state = PL08X_CHAN_RUNNING;
584 pl08x_start_next_txd(plchan);
585}
586
587static void pl08x_phy_reassign_start(struct pl08x_phy_chan *ch,
588 struct pl08x_dma_chan *plchan)
589{
590 struct pl08x_driver_data *pl08x = plchan->host;
591
592 dev_dbg(&pl08x->adev->dev, "reassigned physical channel %d for xfer on %s\n",
593 ch->id, plchan->name);
594
595 /*
596 * We do this without taking the lock; we're really only concerned
597 * about whether this pointer is NULL or not, and we're guaranteed
598 * that this will only be called when it _already_ is non-NULL.
599 */
600 ch->serving = plchan;
601 plchan->phychan = ch;
602 plchan->state = PL08X_CHAN_RUNNING;
603 pl08x_start_next_txd(plchan);
604}
605
606/*
607 * Free a physical DMA channel, potentially reallocating it to another
608 * virtual channel if we have any pending.
609 */
610static void pl08x_phy_free(struct pl08x_dma_chan *plchan)
611{
612 struct pl08x_driver_data *pl08x = plchan->host;
613 struct pl08x_dma_chan *p, *next;
614
615 retry:
616 next = NULL;
617
618 /* Find a waiting virtual channel for the next transfer. */
Russell King01d8dc62012-05-26 14:04:29 +0100619 list_for_each_entry(p, &pl08x->memcpy.channels, vc.chan.device_node)
Russell Kinga5a488d2012-05-26 13:54:15 +0100620 if (p->state == PL08X_CHAN_WAITING) {
621 next = p;
622 break;
623 }
624
625 if (!next) {
Russell King01d8dc62012-05-26 14:04:29 +0100626 list_for_each_entry(p, &pl08x->slave.channels, vc.chan.device_node)
Russell Kinga5a488d2012-05-26 13:54:15 +0100627 if (p->state == PL08X_CHAN_WAITING) {
628 next = p;
629 break;
630 }
631 }
632
633 /* Ensure that the physical channel is stopped */
634 pl08x_terminate_phy_chan(pl08x, plchan->phychan);
635
636 if (next) {
637 bool success;
638
639 /*
640 * Eww. We know this isn't going to deadlock
641 * but lockdep probably doesn't.
642 */
Russell King083be282012-05-26 14:09:53 +0100643 spin_lock(&next->vc.lock);
Russell Kinga5a488d2012-05-26 13:54:15 +0100644 /* Re-check the state now that we have the lock */
645 success = next->state == PL08X_CHAN_WAITING;
646 if (success)
647 pl08x_phy_reassign_start(plchan->phychan, next);
Russell King083be282012-05-26 14:09:53 +0100648 spin_unlock(&next->vc.lock);
Russell Kinga5a488d2012-05-26 13:54:15 +0100649
650 /* If the state changed, try to find another channel */
651 if (!success)
652 goto retry;
653 } else {
654 /* No more jobs, so free up the physical channel */
655 pl08x_put_phy_channel(pl08x, plchan->phychan);
656 }
657
658 plchan->phychan = NULL;
659 plchan->state = PL08X_CHAN_IDLE;
Linus Walleije8689e62010-09-28 15:57:37 +0200660}
661
662/*
663 * LLI handling
664 */
665
666static inline unsigned int pl08x_get_bytes_for_cctl(unsigned int coded)
667{
668 switch (coded) {
669 case PL080_WIDTH_8BIT:
670 return 1;
671 case PL080_WIDTH_16BIT:
672 return 2;
673 case PL080_WIDTH_32BIT:
674 return 4;
675 default:
676 break;
677 }
678 BUG();
679 return 0;
680}
681
682static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth,
Russell King - ARM Linuxcace6582011-01-03 22:37:31 +0000683 size_t tsize)
Linus Walleije8689e62010-09-28 15:57:37 +0200684{
685 u32 retbits = cctl;
686
Russell King - ARM Linuxe8b5e112011-01-03 22:30:24 +0000687 /* Remove all src, dst and transfer size bits */
Linus Walleije8689e62010-09-28 15:57:37 +0200688 retbits &= ~PL080_CONTROL_DWIDTH_MASK;
689 retbits &= ~PL080_CONTROL_SWIDTH_MASK;
690 retbits &= ~PL080_CONTROL_TRANSFER_SIZE_MASK;
691
692 /* Then set the bits according to the parameters */
693 switch (srcwidth) {
694 case 1:
695 retbits |= PL080_WIDTH_8BIT << PL080_CONTROL_SWIDTH_SHIFT;
696 break;
697 case 2:
698 retbits |= PL080_WIDTH_16BIT << PL080_CONTROL_SWIDTH_SHIFT;
699 break;
700 case 4:
701 retbits |= PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT;
702 break;
703 default:
704 BUG();
705 break;
706 }
707
708 switch (dstwidth) {
709 case 1:
710 retbits |= PL080_WIDTH_8BIT << PL080_CONTROL_DWIDTH_SHIFT;
711 break;
712 case 2:
713 retbits |= PL080_WIDTH_16BIT << PL080_CONTROL_DWIDTH_SHIFT;
714 break;
715 case 4:
716 retbits |= PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT;
717 break;
718 default:
719 BUG();
720 break;
721 }
722
723 retbits |= tsize << PL080_CONTROL_TRANSFER_SIZE_SHIFT;
724 return retbits;
725}
726
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000727struct pl08x_lli_build_data {
728 struct pl08x_txd *txd;
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000729 struct pl08x_bus_data srcbus;
730 struct pl08x_bus_data dstbus;
731 size_t remainder;
Russell King - ARM Linux25c94f72011-07-21 17:11:46 +0100732 u32 lli_bus;
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000733};
734
Linus Walleije8689e62010-09-28 15:57:37 +0200735/*
Viresh Kumar0532e6f2011-08-05 15:32:31 +0530736 * Autoselect a master bus to use for the transfer. Slave will be the chosen as
737 * victim in case src & dest are not similarly aligned. i.e. If after aligning
738 * masters address with width requirements of transfer (by sending few byte by
739 * byte data), slave is still not aligned, then its width will be reduced to
740 * BYTE.
741 * - prefers the destination bus if both available
Viresh Kumar036f05f2011-08-05 15:32:41 +0530742 * - prefers bus with fixed address (i.e. peripheral)
Linus Walleije8689e62010-09-28 15:57:37 +0200743 */
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000744static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
745 struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl)
Linus Walleije8689e62010-09-28 15:57:37 +0200746{
747 if (!(cctl & PL080_CONTROL_DST_INCR)) {
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000748 *mbus = &bd->dstbus;
749 *sbus = &bd->srcbus;
Viresh Kumar036f05f2011-08-05 15:32:41 +0530750 } else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
751 *mbus = &bd->srcbus;
752 *sbus = &bd->dstbus;
Linus Walleije8689e62010-09-28 15:57:37 +0200753 } else {
Viresh Kumar036f05f2011-08-05 15:32:41 +0530754 if (bd->dstbus.buswidth >= bd->srcbus.buswidth) {
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000755 *mbus = &bd->dstbus;
756 *sbus = &bd->srcbus;
Linus Walleije8689e62010-09-28 15:57:37 +0200757 } else {
Viresh Kumar036f05f2011-08-05 15:32:41 +0530758 *mbus = &bd->srcbus;
759 *sbus = &bd->dstbus;
Linus Walleije8689e62010-09-28 15:57:37 +0200760 }
761 }
762}
763
764/*
Russell King - ARM Linux94ae8522011-01-16 20:18:05 +0000765 * Fills in one LLI for a certain transfer descriptor and advance the counter
Linus Walleije8689e62010-09-28 15:57:37 +0200766 */
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000767static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
768 int num_llis, int len, u32 cctl)
Linus Walleije8689e62010-09-28 15:57:37 +0200769{
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000770 struct pl08x_lli *llis_va = bd->txd->llis_va;
771 dma_addr_t llis_bus = bd->txd->llis_bus;
Linus Walleije8689e62010-09-28 15:57:37 +0200772
773 BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS);
774
Russell King - ARM Linux30749cb2011-01-03 22:41:13 +0000775 llis_va[num_llis].cctl = cctl;
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000776 llis_va[num_llis].src = bd->srcbus.addr;
777 llis_va[num_llis].dst = bd->dstbus.addr;
Viresh Kumar3e27ee82011-08-05 15:32:27 +0530778 llis_va[num_llis].lli = llis_bus + (num_llis + 1) *
779 sizeof(struct pl08x_lli);
Russell King - ARM Linux25c94f72011-07-21 17:11:46 +0100780 llis_va[num_llis].lli |= bd->lli_bus;
Linus Walleije8689e62010-09-28 15:57:37 +0200781
782 if (cctl & PL080_CONTROL_SRC_INCR)
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000783 bd->srcbus.addr += len;
Linus Walleije8689e62010-09-28 15:57:37 +0200784 if (cctl & PL080_CONTROL_DST_INCR)
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000785 bd->dstbus.addr += len;
Linus Walleije8689e62010-09-28 15:57:37 +0200786
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000787 BUG_ON(bd->remainder < len);
Russell King - ARM Linuxcace6582011-01-03 22:37:31 +0000788
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000789 bd->remainder -= len;
Linus Walleije8689e62010-09-28 15:57:37 +0200790}
791
Viresh Kumar03af5002011-08-05 15:32:39 +0530792static inline void prep_byte_width_lli(struct pl08x_lli_build_data *bd,
793 u32 *cctl, u32 len, int num_llis, size_t *total_bytes)
Linus Walleije8689e62010-09-28 15:57:37 +0200794{
Viresh Kumar03af5002011-08-05 15:32:39 +0530795 *cctl = pl08x_cctl_bits(*cctl, 1, 1, len);
796 pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl);
797 (*total_bytes) += len;
Linus Walleije8689e62010-09-28 15:57:37 +0200798}
799
800/*
801 * This fills in the table of LLIs for the transfer descriptor
802 * Note that we assume we never have to change the burst sizes
803 * Return 0 for error
804 */
805static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
806 struct pl08x_txd *txd)
807{
Linus Walleije8689e62010-09-28 15:57:37 +0200808 struct pl08x_bus_data *mbus, *sbus;
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000809 struct pl08x_lli_build_data bd;
Linus Walleije8689e62010-09-28 15:57:37 +0200810 int num_llis = 0;
Viresh Kumar03af5002011-08-05 15:32:39 +0530811 u32 cctl, early_bytes = 0;
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530812 size_t max_bytes_per_lli, total_bytes;
Russell King - ARM Linux7cb72ad2011-01-03 22:35:28 +0000813 struct pl08x_lli *llis_va;
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530814 struct pl08x_sg *dsg;
Linus Walleije8689e62010-09-28 15:57:37 +0200815
Viresh Kumar3e27ee82011-08-05 15:32:27 +0530816 txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus);
Linus Walleije8689e62010-09-28 15:57:37 +0200817 if (!txd->llis_va) {
818 dev_err(&pl08x->adev->dev, "%s no memory for llis\n", __func__);
819 return 0;
820 }
821
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000822 bd.txd = txd;
Russell King - ARM Linux25c94f72011-07-21 17:11:46 +0100823 bd.lli_bus = (pl08x->lli_buses & PL08X_AHB2) ? PL080_LLI_LM_AHB2 : 0;
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530824 cctl = txd->cctl;
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000825
Linus Walleije8689e62010-09-28 15:57:37 +0200826 /* Find maximum width of the source bus */
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000827 bd.srcbus.maxwidth =
Linus Walleije8689e62010-09-28 15:57:37 +0200828 pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_SWIDTH_MASK) >>
829 PL080_CONTROL_SWIDTH_SHIFT);
830
831 /* Find maximum width of the destination bus */
Russell King - ARM Linux542361f2011-01-03 22:43:15 +0000832 bd.dstbus.maxwidth =
Linus Walleije8689e62010-09-28 15:57:37 +0200833 pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_DWIDTH_MASK) >>
834 PL080_CONTROL_DWIDTH_SHIFT);
835
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530836 list_for_each_entry(dsg, &txd->dsg_list, node) {
837 total_bytes = 0;
838 cctl = txd->cctl;
Linus Walleije8689e62010-09-28 15:57:37 +0200839
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530840 bd.srcbus.addr = dsg->src_addr;
841 bd.dstbus.addr = dsg->dst_addr;
842 bd.remainder = dsg->len;
843 bd.srcbus.buswidth = bd.srcbus.maxwidth;
844 bd.dstbus.buswidth = bd.dstbus.maxwidth;
Linus Walleije8689e62010-09-28 15:57:37 +0200845
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530846 pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
Linus Walleije8689e62010-09-28 15:57:37 +0200847
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530848 dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n",
849 bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
850 bd.srcbus.buswidth,
851 bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "",
852 bd.dstbus.buswidth,
853 bd.remainder);
854 dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n",
855 mbus == &bd.srcbus ? "src" : "dst",
856 sbus == &bd.srcbus ? "src" : "dst");
Russell King - ARM Linuxfc74eb72011-07-21 17:12:06 +0100857
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530858 /*
859 * Zero length is only allowed if all these requirements are
860 * met:
861 * - flow controller is peripheral.
862 * - src.addr is aligned to src.width
863 * - dst.addr is aligned to dst.width
864 *
865 * sg_len == 1 should be true, as there can be two cases here:
866 *
867 * - Memory addresses are contiguous and are not scattered.
868 * Here, Only one sg will be passed by user driver, with
869 * memory address and zero length. We pass this to controller
870 * and after the transfer it will receive the last burst
871 * request from peripheral and so transfer finishes.
872 *
873 * - Memory addresses are scattered and are not contiguous.
874 * Here, Obviously as DMA controller doesn't know when a lli's
875 * transfer gets over, it can't load next lli. So in this
876 * case, there has to be an assumption that only one lli is
877 * supported. Thus, we can't have scattered addresses.
878 */
879 if (!bd.remainder) {
880 u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >>
881 PL080_CONFIG_FLOW_CONTROL_SHIFT;
882 if (!((fc >= PL080_FLOW_SRC2DST_DST) &&
Viresh Kumar0a235652011-08-05 15:32:42 +0530883 (fc <= PL080_FLOW_SRC2DST_SRC))) {
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530884 dev_err(&pl08x->adev->dev, "%s sg len can't be zero",
885 __func__);
886 return 0;
887 }
Linus Walleije8689e62010-09-28 15:57:37 +0200888
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530889 if ((bd.srcbus.addr % bd.srcbus.buswidth) ||
Julia Lawall880db3f2012-01-12 22:49:29 +0100890 (bd.dstbus.addr % bd.dstbus.buswidth)) {
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530891 dev_err(&pl08x->adev->dev,
892 "%s src & dst address must be aligned to src"
893 " & dst width if peripheral is flow controller",
894 __func__);
895 return 0;
896 }
Linus Walleije8689e62010-09-28 15:57:37 +0200897
Viresh Kumar16a2e7d2011-08-05 15:32:37 +0530898 cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530899 bd.dstbus.buswidth, 0);
900 pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl);
901 break;
Linus Walleije8689e62010-09-28 15:57:37 +0200902 }
903
904 /*
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530905 * Send byte by byte for following cases
906 * - Less than a bus width available
907 * - until master bus is aligned
Linus Walleije8689e62010-09-28 15:57:37 +0200908 */
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530909 if (bd.remainder < mbus->buswidth)
910 early_bytes = bd.remainder;
911 else if ((mbus->addr) % (mbus->buswidth)) {
912 early_bytes = mbus->buswidth - (mbus->addr) %
913 (mbus->buswidth);
914 if ((bd.remainder - early_bytes) < mbus->buswidth)
915 early_bytes = bd.remainder;
Linus Walleije8689e62010-09-28 15:57:37 +0200916 }
Viresh Kumar16a2e7d2011-08-05 15:32:37 +0530917
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530918 if (early_bytes) {
919 dev_vdbg(&pl08x->adev->dev,
920 "%s byte width LLIs (remain 0x%08x)\n",
921 __func__, bd.remainder);
922 prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++,
923 &total_bytes);
924 }
Linus Walleije8689e62010-09-28 15:57:37 +0200925
Viresh Kumarb7f69d92011-08-05 15:32:43 +0530926 if (bd.remainder) {
927 /*
928 * Master now aligned
929 * - if slave is not then we must set its width down
930 */
931 if (sbus->addr % sbus->buswidth) {
932 dev_dbg(&pl08x->adev->dev,
933 "%s set down bus width to one byte\n",
934 __func__);
935
936 sbus->buswidth = 1;
937 }
938
939 /*
940 * Bytes transferred = tsize * src width, not
941 * MIN(buswidths)
942 */
943 max_bytes_per_lli = bd.srcbus.buswidth *
944 PL080_CONTROL_TRANSFER_SIZE_MASK;
945 dev_vdbg(&pl08x->adev->dev,
946 "%s max bytes per lli = %zu\n",
947 __func__, max_bytes_per_lli);
948
949 /*
950 * Make largest possible LLIs until less than one bus
951 * width left
952 */
953 while (bd.remainder > (mbus->buswidth - 1)) {
954 size_t lli_len, tsize, width;
955
956 /*
957 * If enough left try to send max possible,
958 * otherwise try to send the remainder
959 */
960 lli_len = min(bd.remainder, max_bytes_per_lli);
961
962 /*
963 * Check against maximum bus alignment:
964 * Calculate actual transfer size in relation to
965 * bus width an get a maximum remainder of the
966 * highest bus width - 1
967 */
968 width = max(mbus->buswidth, sbus->buswidth);
969 lli_len = (lli_len / width) * width;
970 tsize = lli_len / bd.srcbus.buswidth;
971
972 dev_vdbg(&pl08x->adev->dev,
973 "%s fill lli with single lli chunk of "
974 "size 0x%08zx (remainder 0x%08zx)\n",
975 __func__, lli_len, bd.remainder);
976
977 cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
978 bd.dstbus.buswidth, tsize);
979 pl08x_fill_lli_for_desc(&bd, num_llis++,
980 lli_len, cctl);
981 total_bytes += lli_len;
982 }
983
984 /*
985 * Send any odd bytes
986 */
987 if (bd.remainder) {
988 dev_vdbg(&pl08x->adev->dev,
989 "%s align with boundary, send odd bytes (remain %zu)\n",
990 __func__, bd.remainder);
991 prep_byte_width_lli(&bd, &cctl, bd.remainder,
992 num_llis++, &total_bytes);
993 }
994 }
995
996 if (total_bytes != dsg->len) {
997 dev_err(&pl08x->adev->dev,
998 "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n",
999 __func__, total_bytes, dsg->len);
1000 return 0;
1001 }
1002
1003 if (num_llis >= MAX_NUM_TSFR_LLIS) {
1004 dev_err(&pl08x->adev->dev,
1005 "%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n",
1006 __func__, (u32) MAX_NUM_TSFR_LLIS);
1007 return 0;
1008 }
Linus Walleije8689e62010-09-28 15:57:37 +02001009 }
Linus Walleije8689e62010-09-28 15:57:37 +02001010
Russell King - ARM Linuxb58b6b52011-01-03 22:34:48 +00001011 llis_va = txd->llis_va;
Russell King - ARM Linux94ae8522011-01-16 20:18:05 +00001012 /* The final LLI terminates the LLI. */
Russell King - ARM Linuxbfddfb42011-01-03 22:38:12 +00001013 llis_va[num_llis - 1].lli = 0;
Russell King - ARM Linux94ae8522011-01-16 20:18:05 +00001014 /* The final LLI element shall also fire an interrupt. */
Russell King - ARM Linuxb58b6b52011-01-03 22:34:48 +00001015 llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN;
Linus Walleije8689e62010-09-28 15:57:37 +02001016
Linus Walleije8689e62010-09-28 15:57:37 +02001017#ifdef VERBOSE_DEBUG
1018 {
1019 int i;
1020
Russell King - ARM Linuxfc74eb72011-07-21 17:12:06 +01001021 dev_vdbg(&pl08x->adev->dev,
1022 "%-3s %-9s %-10s %-10s %-10s %s\n",
1023 "lli", "", "csrc", "cdst", "clli", "cctl");
Linus Walleije8689e62010-09-28 15:57:37 +02001024 for (i = 0; i < num_llis; i++) {
1025 dev_vdbg(&pl08x->adev->dev,
Russell King - ARM Linuxfc74eb72011-07-21 17:12:06 +01001026 "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n",
1027 i, &llis_va[i], llis_va[i].src,
1028 llis_va[i].dst, llis_va[i].lli, llis_va[i].cctl
Linus Walleije8689e62010-09-28 15:57:37 +02001029 );
1030 }
1031 }
1032#endif
1033
1034 return num_llis;
1035}
1036
Linus Walleije8689e62010-09-28 15:57:37 +02001037static void pl08x_free_txd(struct pl08x_driver_data *pl08x,
1038 struct pl08x_txd *txd)
1039{
Viresh Kumarb7f69d92011-08-05 15:32:43 +05301040 struct pl08x_sg *dsg, *_dsg;
1041
Viresh Kumarc1205642011-08-05 15:32:44 +05301042 if (txd->llis_va)
1043 dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus);
Linus Walleije8689e62010-09-28 15:57:37 +02001044
Viresh Kumarb7f69d92011-08-05 15:32:43 +05301045 list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) {
1046 list_del(&dsg->node);
1047 kfree(dsg);
1048 }
1049
Linus Walleije8689e62010-09-28 15:57:37 +02001050 kfree(txd);
1051}
1052
Russell King18536132012-05-26 14:42:23 +01001053static void pl08x_unmap_buffers(struct pl08x_txd *txd)
1054{
1055 struct device *dev = txd->vd.tx.chan->device->dev;
1056 struct pl08x_sg *dsg;
1057
1058 if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
1059 if (txd->vd.tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE)
1060 list_for_each_entry(dsg, &txd->dsg_list, node)
1061 dma_unmap_single(dev, dsg->src_addr, dsg->len,
1062 DMA_TO_DEVICE);
1063 else {
1064 list_for_each_entry(dsg, &txd->dsg_list, node)
1065 dma_unmap_page(dev, dsg->src_addr, dsg->len,
1066 DMA_TO_DEVICE);
1067 }
1068 }
1069 if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
1070 if (txd->vd.tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE)
1071 list_for_each_entry(dsg, &txd->dsg_list, node)
1072 dma_unmap_single(dev, dsg->dst_addr, dsg->len,
1073 DMA_FROM_DEVICE);
1074 else
1075 list_for_each_entry(dsg, &txd->dsg_list, node)
1076 dma_unmap_page(dev, dsg->dst_addr, dsg->len,
1077 DMA_FROM_DEVICE);
1078 }
1079}
1080
1081static void pl08x_desc_free(struct virt_dma_desc *vd)
1082{
1083 struct pl08x_txd *txd = to_pl08x_txd(&vd->tx);
1084 struct pl08x_dma_chan *plchan = to_pl08x_chan(vd->tx.chan);
Russell King18536132012-05-26 14:42:23 +01001085
1086 if (!plchan->slave)
1087 pl08x_unmap_buffers(txd);
1088
1089 if (!txd->done)
1090 pl08x_release_mux(plchan);
1091
Russell King18536132012-05-26 14:42:23 +01001092 pl08x_free_txd(plchan->host, txd);
Russell King18536132012-05-26 14:42:23 +01001093}
1094
Linus Walleije8689e62010-09-28 15:57:37 +02001095static void pl08x_free_txd_list(struct pl08x_driver_data *pl08x,
1096 struct pl08x_dma_chan *plchan)
1097{
Russell Kingea160562012-05-25 13:10:36 +01001098 LIST_HEAD(head);
1099 struct pl08x_txd *txd;
Linus Walleije8689e62010-09-28 15:57:37 +02001100
Russell King879f1272012-05-26 14:27:40 +01001101 vchan_get_all_descriptors(&plchan->vc, &head);
Russell Kingea160562012-05-25 13:10:36 +01001102
1103 while (!list_empty(&head)) {
Russell King879f1272012-05-26 14:27:40 +01001104 txd = list_first_entry(&head, struct pl08x_txd, vd.node);
Russell King879f1272012-05-26 14:27:40 +01001105 list_del(&txd->vd.node);
Russell King18536132012-05-26 14:42:23 +01001106 pl08x_desc_free(&txd->vd);
Linus Walleije8689e62010-09-28 15:57:37 +02001107 }
1108}
1109
1110/*
1111 * The DMA ENGINE API
1112 */
1113static int pl08x_alloc_chan_resources(struct dma_chan *chan)
1114{
1115 return 0;
1116}
1117
1118static void pl08x_free_chan_resources(struct dma_chan *chan)
1119{
Russell Kinga0686822012-05-26 17:00:49 +01001120 /* Ensure all queued descriptors are freed */
1121 vchan_free_chan_resources(to_virt_chan(chan));
Linus Walleije8689e62010-09-28 15:57:37 +02001122}
1123
Linus Walleije8689e62010-09-28 15:57:37 +02001124static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt(
1125 struct dma_chan *chan, unsigned long flags)
1126{
1127 struct dma_async_tx_descriptor *retval = NULL;
1128
1129 return retval;
1130}
1131
1132/*
Russell King - ARM Linux94ae8522011-01-16 20:18:05 +00001133 * Code accessing dma_async_is_complete() in a tight loop may give problems.
1134 * If slaves are relying on interrupts to signal completion this function
1135 * must not be called with interrupts disabled.
Linus Walleije8689e62010-09-28 15:57:37 +02001136 */
Viresh Kumar3e27ee82011-08-05 15:32:27 +05301137static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan,
1138 dma_cookie_t cookie, struct dma_tx_state *txstate)
Linus Walleije8689e62010-09-28 15:57:37 +02001139{
1140 struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
Russell King06e885b2012-05-26 15:05:52 +01001141 struct virt_dma_desc *vd;
1142 unsigned long flags;
Linus Walleije8689e62010-09-28 15:57:37 +02001143 enum dma_status ret;
Russell King06e885b2012-05-26 15:05:52 +01001144 size_t bytes = 0;
Linus Walleije8689e62010-09-28 15:57:37 +02001145
Russell King - ARM Linux96a2af42012-03-06 22:35:27 +00001146 ret = dma_cookie_status(chan, cookie, txstate);
1147 if (ret == DMA_SUCCESS)
Linus Walleije8689e62010-09-28 15:57:37 +02001148 return ret;
Linus Walleije8689e62010-09-28 15:57:37 +02001149
1150 /*
Russell King06e885b2012-05-26 15:05:52 +01001151 * There's no point calculating the residue if there's
1152 * no txstate to store the value.
1153 */
1154 if (!txstate) {
1155 if (plchan->state == PL08X_CHAN_PAUSED)
1156 ret = DMA_PAUSED;
1157 return ret;
1158 }
1159
1160 spin_lock_irqsave(&plchan->vc.lock, flags);
1161 ret = dma_cookie_status(chan, cookie, txstate);
1162 if (ret != DMA_SUCCESS) {
1163 vd = vchan_find_desc(&plchan->vc, cookie);
1164 if (vd) {
1165 /* On the issued list, so hasn't been processed yet */
1166 struct pl08x_txd *txd = to_pl08x_txd(&vd->tx);
1167 struct pl08x_sg *dsg;
1168
1169 list_for_each_entry(dsg, &txd->dsg_list, node)
1170 bytes += dsg->len;
1171 } else {
1172 bytes = pl08x_getbytes_chan(plchan);
1173 }
1174 }
1175 spin_unlock_irqrestore(&plchan->vc.lock, flags);
1176
1177 /*
Linus Walleije8689e62010-09-28 15:57:37 +02001178 * This cookie not complete yet
Russell King - ARM Linux96a2af42012-03-06 22:35:27 +00001179 * Get number of bytes left in the active transactions and queue
Linus Walleije8689e62010-09-28 15:57:37 +02001180 */
Russell King06e885b2012-05-26 15:05:52 +01001181 dma_set_residue(txstate, bytes);
Linus Walleije8689e62010-09-28 15:57:37 +02001182
Russell King06e885b2012-05-26 15:05:52 +01001183 if (plchan->state == PL08X_CHAN_PAUSED && ret == DMA_IN_PROGRESS)
1184 ret = DMA_PAUSED;
Linus Walleije8689e62010-09-28 15:57:37 +02001185
1186 /* Whether waiting or running, we're in progress */
Russell King06e885b2012-05-26 15:05:52 +01001187 return ret;
Linus Walleije8689e62010-09-28 15:57:37 +02001188}
1189
1190/* PrimeCell DMA extension */
1191struct burst_table {
Russell King - ARM Linux760596c62011-07-21 17:14:08 +01001192 u32 burstwords;
Linus Walleije8689e62010-09-28 15:57:37 +02001193 u32 reg;
1194};
1195
1196static const struct burst_table burst_sizes[] = {
1197 {
1198 .burstwords = 256,
Russell King - ARM Linux760596c62011-07-21 17:14:08 +01001199 .reg = PL080_BSIZE_256,
Linus Walleije8689e62010-09-28 15:57:37 +02001200 },
1201 {
1202 .burstwords = 128,
Russell King - ARM Linux760596c62011-07-21 17:14:08 +01001203 .reg = PL080_BSIZE_128,
Linus Walleije8689e62010-09-28 15:57:37 +02001204 },
1205 {
1206 .burstwords = 64,
Russell King - ARM Linux760596c62011-07-21 17:14:08 +01001207 .reg = PL080_BSIZE_64,
Linus Walleije8689e62010-09-28 15:57:37 +02001208 },
1209 {
1210 .burstwords = 32,
Russell King - ARM Linux760596c62011-07-21 17:14:08 +01001211 .reg = PL080_BSIZE_32,
Linus Walleije8689e62010-09-28 15:57:37 +02001212 },
1213 {
1214 .burstwords = 16,
Russell King - ARM Linux760596c62011-07-21 17:14:08 +01001215 .reg = PL080_BSIZE_16,
Linus Walleije8689e62010-09-28 15:57:37 +02001216 },
1217 {
1218 .burstwords = 8,
Russell King - ARM Linux760596c62011-07-21 17:14:08 +01001219 .reg = PL080_BSIZE_8,
Linus Walleije8689e62010-09-28 15:57:37 +02001220 },
1221 {
1222 .burstwords = 4,
Russell King - ARM Linux760596c62011-07-21 17:14:08 +01001223 .reg = PL080_BSIZE_4,
Linus Walleije8689e62010-09-28 15:57:37 +02001224 },
1225 {
Russell King - ARM Linux760596c62011-07-21 17:14:08 +01001226 .burstwords = 0,
1227 .reg = PL080_BSIZE_1,
Linus Walleije8689e62010-09-28 15:57:37 +02001228 },
1229};
1230
Russell King - ARM Linux121c8472011-07-21 17:13:48 +01001231/*
1232 * Given the source and destination available bus masks, select which
1233 * will be routed to each port. We try to have source and destination
1234 * on separate ports, but always respect the allowable settings.
1235 */
1236static u32 pl08x_select_bus(u8 src, u8 dst)
1237{
1238 u32 cctl = 0;
1239
1240 if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1)))
1241 cctl |= PL080_CONTROL_DST_AHB2;
1242 if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2)))
1243 cctl |= PL080_CONTROL_SRC_AHB2;
1244
1245 return cctl;
1246}
1247
Russell King - ARM Linuxf14c4262011-07-21 17:12:47 +01001248static u32 pl08x_cctl(u32 cctl)
1249{
1250 cctl &= ~(PL080_CONTROL_SRC_AHB2 | PL080_CONTROL_DST_AHB2 |
1251 PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR |
1252 PL080_CONTROL_PROT_MASK);
1253
1254 /* Access the cell in privileged mode, non-bufferable, non-cacheable */
1255 return cctl | PL080_CONTROL_PROT_SYS;
1256}
1257
Russell King - ARM Linuxaa88cda2011-07-21 17:13:28 +01001258static u32 pl08x_width(enum dma_slave_buswidth width)
1259{
1260 switch (width) {
1261 case DMA_SLAVE_BUSWIDTH_1_BYTE:
1262 return PL080_WIDTH_8BIT;
1263 case DMA_SLAVE_BUSWIDTH_2_BYTES:
1264 return PL080_WIDTH_16BIT;
1265 case DMA_SLAVE_BUSWIDTH_4_BYTES:
1266 return PL080_WIDTH_32BIT;
Vinod Koulf32807f2011-07-25 19:22:01 +05301267 default:
1268 return ~0;
Russell King - ARM Linuxaa88cda2011-07-21 17:13:28 +01001269 }
Russell King - ARM Linuxaa88cda2011-07-21 17:13:28 +01001270}
1271
Russell King - ARM Linux760596c62011-07-21 17:14:08 +01001272static u32 pl08x_burst(u32 maxburst)
1273{
1274 int i;
1275
1276 for (i = 0; i < ARRAY_SIZE(burst_sizes); i++)
1277 if (burst_sizes[i].burstwords <= maxburst)
1278 break;
1279
1280 return burst_sizes[i].reg;
1281}
1282
Russell King9862ba12012-05-16 11:16:03 +01001283static u32 pl08x_get_cctl(struct pl08x_dma_chan *plchan,
1284 enum dma_slave_buswidth addr_width, u32 maxburst)
1285{
1286 u32 width, burst, cctl = 0;
1287
1288 width = pl08x_width(addr_width);
1289 if (width == ~0)
1290 return ~0;
1291
1292 cctl |= width << PL080_CONTROL_SWIDTH_SHIFT;
1293 cctl |= width << PL080_CONTROL_DWIDTH_SHIFT;
1294
1295 /*
1296 * If this channel will only request single transfers, set this
1297 * down to ONE element. Also select one element if no maxburst
1298 * is specified.
1299 */
1300 if (plchan->cd->single)
1301 maxburst = 1;
1302
1303 burst = pl08x_burst(maxburst);
1304 cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT;
1305 cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT;
1306
1307 return pl08x_cctl(cctl);
1308}
1309
Russell King - ARM Linuxf0fd9442011-01-03 22:45:57 +00001310static int dma_set_runtime_config(struct dma_chan *chan,
1311 struct dma_slave_config *config)
Linus Walleije8689e62010-09-28 15:57:37 +02001312{
1313 struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
Linus Walleije8689e62010-09-28 15:57:37 +02001314
Russell King - ARM Linuxb7f75862011-01-03 22:46:17 +00001315 if (!plchan->slave)
1316 return -EINVAL;
1317
Russell Kingdc8d5f82012-05-16 12:20:55 +01001318 /* Reject definitely invalid configurations */
1319 if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
1320 config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
Russell King - ARM Linuxf0fd9442011-01-03 22:45:57 +00001321 return -EINVAL;
Linus Walleije8689e62010-09-28 15:57:37 +02001322
Russell Kinged91c132012-05-16 11:02:40 +01001323 plchan->cfg = *config;
1324
Russell King - ARM Linuxf0fd9442011-01-03 22:45:57 +00001325 return 0;
Linus Walleije8689e62010-09-28 15:57:37 +02001326}
1327
1328/*
1329 * Slave transactions callback to the slave device to allow
1330 * synchronization of slave DMA signals with the DMAC enable
1331 */
1332static void pl08x_issue_pending(struct dma_chan *chan)
1333{
1334 struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
Linus Walleije8689e62010-09-28 15:57:37 +02001335 unsigned long flags;
1336
Russell King083be282012-05-26 14:09:53 +01001337 spin_lock_irqsave(&plchan->vc.lock, flags);
Russell King879f1272012-05-26 14:27:40 +01001338 if (vchan_issue_pending(&plchan->vc)) {
Russell Kinga5a488d2012-05-26 13:54:15 +01001339 if (!plchan->phychan && plchan->state != PL08X_CHAN_WAITING)
1340 pl08x_phy_alloc_and_start(plchan);
Linus Walleije8689e62010-09-28 15:57:37 +02001341 }
Russell King083be282012-05-26 14:09:53 +01001342 spin_unlock_irqrestore(&plchan->vc.lock, flags);
Linus Walleije8689e62010-09-28 15:57:37 +02001343}
1344
Russell King879f1272012-05-26 14:27:40 +01001345static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan)
Russell King - ARM Linuxac3cd202011-01-03 22:35:49 +00001346{
Viresh Kumarb201c112011-08-05 15:32:29 +05301347 struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
Russell King - ARM Linuxac3cd202011-01-03 22:35:49 +00001348
1349 if (txd) {
Viresh Kumarb7f69d92011-08-05 15:32:43 +05301350 INIT_LIST_HEAD(&txd->dsg_list);
Russell King - ARM Linux4983a042011-01-03 22:39:33 +00001351
1352 /* Always enable error and terminal interrupts */
1353 txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK |
1354 PL080_CONFIG_TC_IRQ_MASK;
Russell King - ARM Linuxac3cd202011-01-03 22:35:49 +00001355 }
1356 return txd;
1357}
1358
Linus Walleije8689e62010-09-28 15:57:37 +02001359/*
1360 * Initialize a descriptor to be used by memcpy submit
1361 */
1362static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy(
1363 struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
1364 size_t len, unsigned long flags)
1365{
1366 struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
1367 struct pl08x_driver_data *pl08x = plchan->host;
1368 struct pl08x_txd *txd;
Viresh Kumarb7f69d92011-08-05 15:32:43 +05301369 struct pl08x_sg *dsg;
Linus Walleije8689e62010-09-28 15:57:37 +02001370 int ret;
1371
Russell King879f1272012-05-26 14:27:40 +01001372 txd = pl08x_get_txd(plchan);
Linus Walleije8689e62010-09-28 15:57:37 +02001373 if (!txd) {
1374 dev_err(&pl08x->adev->dev,
1375 "%s no memory for descriptor\n", __func__);
1376 return NULL;
1377 }
1378
Viresh Kumarb7f69d92011-08-05 15:32:43 +05301379 dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT);
1380 if (!dsg) {
1381 pl08x_free_txd(pl08x, txd);
1382 dev_err(&pl08x->adev->dev, "%s no memory for pl080 sg\n",
1383 __func__);
1384 return NULL;
1385 }
1386 list_add_tail(&dsg->node, &txd->dsg_list);
1387
Viresh Kumarb7f69d92011-08-05 15:32:43 +05301388 dsg->src_addr = src;
1389 dsg->dst_addr = dest;
1390 dsg->len = len;
Linus Walleije8689e62010-09-28 15:57:37 +02001391
1392 /* Set platform data for m2m */
Russell King - ARM Linux4983a042011-01-03 22:39:33 +00001393 txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
Russell Kingdc8d5f82012-05-16 12:20:55 +01001394 txd->cctl = pl08x->pd->memcpy_channel.cctl_memcpy &
Russell King - ARM Linuxc7da9a52011-01-03 22:40:53 +00001395 ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2);
Russell King - ARM Linux4983a042011-01-03 22:39:33 +00001396
Linus Walleije8689e62010-09-28 15:57:37 +02001397 /* Both to be incremented or the code will break */
Russell King - ARM Linux70b5ed62011-01-03 22:40:13 +00001398 txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR;
Russell King - ARM Linuxc7da9a52011-01-03 22:40:53 +00001399
Russell King - ARM Linuxc7da9a52011-01-03 22:40:53 +00001400 if (pl08x->vd->dualmaster)
Russell King - ARM Linux121c8472011-07-21 17:13:48 +01001401 txd->cctl |= pl08x_select_bus(pl08x->mem_buses,
1402 pl08x->mem_buses);
Linus Walleije8689e62010-09-28 15:57:37 +02001403
Russell Kingaa4afb72012-05-26 15:43:00 +01001404 ret = pl08x_fill_llis_for_desc(plchan->host, txd);
1405 if (!ret) {
1406 pl08x_free_txd(pl08x, txd);
Linus Walleije8689e62010-09-28 15:57:37 +02001407 return NULL;
Russell Kingaa4afb72012-05-26 15:43:00 +01001408 }
Linus Walleije8689e62010-09-28 15:57:37 +02001409
Russell King879f1272012-05-26 14:27:40 +01001410 return vchan_tx_prep(&plchan->vc, &txd->vd, flags);
Linus Walleije8689e62010-09-28 15:57:37 +02001411}
1412
Russell King - ARM Linux3e2a0372011-01-03 22:32:46 +00001413static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
Linus Walleije8689e62010-09-28 15:57:37 +02001414 struct dma_chan *chan, struct scatterlist *sgl,
Vinod Kouldb8196d2011-10-13 22:34:23 +05301415 unsigned int sg_len, enum dma_transfer_direction direction,
Alexandre Bounine185ecb52012-03-08 15:35:13 -05001416 unsigned long flags, void *context)
Linus Walleije8689e62010-09-28 15:57:37 +02001417{
1418 struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
1419 struct pl08x_driver_data *pl08x = plchan->host;
1420 struct pl08x_txd *txd;
Viresh Kumarb7f69d92011-08-05 15:32:43 +05301421 struct pl08x_sg *dsg;
1422 struct scatterlist *sg;
Russell Kingdc8d5f82012-05-16 12:20:55 +01001423 enum dma_slave_buswidth addr_width;
Viresh Kumarb7f69d92011-08-05 15:32:43 +05301424 dma_addr_t slave_addr;
Viresh Kumar0a235652011-08-05 15:32:42 +05301425 int ret, tmp;
Russell King409ec8d2012-05-16 11:08:43 +01001426 u8 src_buses, dst_buses;
Russell Kingdc8d5f82012-05-16 12:20:55 +01001427 u32 maxburst, cctl;
Linus Walleije8689e62010-09-28 15:57:37 +02001428
Linus Walleije8689e62010-09-28 15:57:37 +02001429 dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n",
Lars-Peter Clausenfdaf9c42012-04-25 20:50:52 +02001430 __func__, sg_dma_len(sgl), plchan->name);
Linus Walleije8689e62010-09-28 15:57:37 +02001431
Russell King879f1272012-05-26 14:27:40 +01001432 txd = pl08x_get_txd(plchan);
Linus Walleije8689e62010-09-28 15:57:37 +02001433 if (!txd) {
1434 dev_err(&pl08x->adev->dev, "%s no txd\n", __func__);
1435 return NULL;
1436 }
1437
Linus Walleije8689e62010-09-28 15:57:37 +02001438 /*
1439 * Set up addresses, the PrimeCell configured address
1440 * will take precedence since this may configure the
1441 * channel target address dynamically at runtime.
1442 */
Vinod Kouldb8196d2011-10-13 22:34:23 +05301443 if (direction == DMA_MEM_TO_DEV) {
Russell Kingdc8d5f82012-05-16 12:20:55 +01001444 cctl = PL080_CONTROL_SRC_INCR;
Russell Kinged91c132012-05-16 11:02:40 +01001445 slave_addr = plchan->cfg.dst_addr;
Russell Kingdc8d5f82012-05-16 12:20:55 +01001446 addr_width = plchan->cfg.dst_addr_width;
1447 maxburst = plchan->cfg.dst_maxburst;
Russell King409ec8d2012-05-16 11:08:43 +01001448 src_buses = pl08x->mem_buses;
1449 dst_buses = plchan->cd->periph_buses;
Vinod Kouldb8196d2011-10-13 22:34:23 +05301450 } else if (direction == DMA_DEV_TO_MEM) {
Russell Kingdc8d5f82012-05-16 12:20:55 +01001451 cctl = PL080_CONTROL_DST_INCR;
Russell Kinged91c132012-05-16 11:02:40 +01001452 slave_addr = plchan->cfg.src_addr;
Russell Kingdc8d5f82012-05-16 12:20:55 +01001453 addr_width = plchan->cfg.src_addr_width;
1454 maxburst = plchan->cfg.src_maxburst;
Russell King409ec8d2012-05-16 11:08:43 +01001455 src_buses = plchan->cd->periph_buses;
1456 dst_buses = pl08x->mem_buses;
Linus Walleije8689e62010-09-28 15:57:37 +02001457 } else {
Viresh Kumarb7f69d92011-08-05 15:32:43 +05301458 pl08x_free_txd(pl08x, txd);
Linus Walleije8689e62010-09-28 15:57:37 +02001459 dev_err(&pl08x->adev->dev,
1460 "%s direction unsupported\n", __func__);
1461 return NULL;
1462 }
Linus Walleije8689e62010-09-28 15:57:37 +02001463
Russell Kingdc8d5f82012-05-16 12:20:55 +01001464 cctl |= pl08x_get_cctl(plchan, addr_width, maxburst);
Russell King800d6832012-05-16 11:33:31 +01001465 if (cctl == ~0) {
1466 pl08x_free_txd(pl08x, txd);
1467 dev_err(&pl08x->adev->dev,
1468 "DMA slave configuration botched?\n");
1469 return NULL;
1470 }
1471
Russell King409ec8d2012-05-16 11:08:43 +01001472 txd->cctl = cctl | pl08x_select_bus(src_buses, dst_buses);
1473
Russell King95442b22012-05-16 11:05:09 +01001474 if (plchan->cfg.device_fc)
Vinod Kouldb8196d2011-10-13 22:34:23 +05301475 tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER_PER :
Viresh Kumar0a235652011-08-05 15:32:42 +05301476 PL080_FLOW_PER2MEM_PER;
1477 else
Vinod Kouldb8196d2011-10-13 22:34:23 +05301478 tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER :
Viresh Kumar0a235652011-08-05 15:32:42 +05301479 PL080_FLOW_PER2MEM;
1480
1481 txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT;
1482
Russell Kingc48d4962012-05-25 11:48:51 +01001483 ret = pl08x_request_mux(plchan);
1484 if (ret < 0) {
1485 pl08x_free_txd(pl08x, txd);
1486 dev_dbg(&pl08x->adev->dev,
1487 "unable to mux for transfer on %s due to platform restrictions\n",
1488 plchan->name);
1489 return NULL;
1490 }
1491
1492 dev_dbg(&pl08x->adev->dev, "allocated DMA request signal %d for xfer on %s\n",
1493 plchan->signal, plchan->name);
1494
1495 /* Assign the flow control signal to this channel */
1496 if (direction == DMA_MEM_TO_DEV)
1497 txd->ccfg |= plchan->signal << PL080_CONFIG_DST_SEL_SHIFT;
1498 else
1499 txd->ccfg |= plchan->signal << PL080_CONFIG_SRC_SEL_SHIFT;
1500
Viresh Kumarb7f69d92011-08-05 15:32:43 +05301501 for_each_sg(sgl, sg, sg_len, tmp) {
1502 dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT);
1503 if (!dsg) {
Russell Kingc48d4962012-05-25 11:48:51 +01001504 pl08x_release_mux(plchan);
Viresh Kumarb7f69d92011-08-05 15:32:43 +05301505 pl08x_free_txd(pl08x, txd);
1506 dev_err(&pl08x->adev->dev, "%s no mem for pl080 sg\n",
1507 __func__);
1508 return NULL;
1509 }
1510 list_add_tail(&dsg->node, &txd->dsg_list);
1511
1512 dsg->len = sg_dma_len(sg);
Vinod Kouldb8196d2011-10-13 22:34:23 +05301513 if (direction == DMA_MEM_TO_DEV) {
Lars-Peter Clausencbb796c2012-04-25 20:50:51 +02001514 dsg->src_addr = sg_dma_address(sg);
Viresh Kumarb7f69d92011-08-05 15:32:43 +05301515 dsg->dst_addr = slave_addr;
1516 } else {
1517 dsg->src_addr = slave_addr;
Lars-Peter Clausencbb796c2012-04-25 20:50:51 +02001518 dsg->dst_addr = sg_dma_address(sg);
Viresh Kumarb7f69d92011-08-05 15:32:43 +05301519 }
1520 }
1521
Russell Kingaa4afb72012-05-26 15:43:00 +01001522 ret = pl08x_fill_llis_for_desc(plchan->host, txd);
1523 if (!ret) {
1524 pl08x_release_mux(plchan);
1525 pl08x_free_txd(pl08x, txd);
Linus Walleije8689e62010-09-28 15:57:37 +02001526 return NULL;
Russell Kingaa4afb72012-05-26 15:43:00 +01001527 }
Linus Walleije8689e62010-09-28 15:57:37 +02001528
Russell King879f1272012-05-26 14:27:40 +01001529 return vchan_tx_prep(&plchan->vc, &txd->vd, flags);
Linus Walleije8689e62010-09-28 15:57:37 +02001530}
1531
1532static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
1533 unsigned long arg)
1534{
1535 struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
1536 struct pl08x_driver_data *pl08x = plchan->host;
1537 unsigned long flags;
1538 int ret = 0;
1539
1540 /* Controls applicable to inactive channels */
1541 if (cmd == DMA_SLAVE_CONFIG) {
Russell King - ARM Linuxf0fd9442011-01-03 22:45:57 +00001542 return dma_set_runtime_config(chan,
1543 (struct dma_slave_config *)arg);
Linus Walleije8689e62010-09-28 15:57:37 +02001544 }
1545
1546 /*
1547 * Anything succeeds on channels with no physical allocation and
1548 * no queued transfers.
1549 */
Russell King083be282012-05-26 14:09:53 +01001550 spin_lock_irqsave(&plchan->vc.lock, flags);
Linus Walleije8689e62010-09-28 15:57:37 +02001551 if (!plchan->phychan && !plchan->at) {
Russell King083be282012-05-26 14:09:53 +01001552 spin_unlock_irqrestore(&plchan->vc.lock, flags);
Linus Walleije8689e62010-09-28 15:57:37 +02001553 return 0;
1554 }
1555
1556 switch (cmd) {
1557 case DMA_TERMINATE_ALL:
1558 plchan->state = PL08X_CHAN_IDLE;
1559
1560 if (plchan->phychan) {
Linus Walleije8689e62010-09-28 15:57:37 +02001561 /*
1562 * Mark physical channel as free and free any slave
1563 * signal
1564 */
Russell Kinga5a488d2012-05-26 13:54:15 +01001565 pl08x_phy_free(plchan);
Linus Walleije8689e62010-09-28 15:57:37 +02001566 }
Linus Walleije8689e62010-09-28 15:57:37 +02001567 /* Dequeue jobs and free LLIs */
1568 if (plchan->at) {
Russell King18536132012-05-26 14:42:23 +01001569 pl08x_desc_free(&plchan->at->vd);
Linus Walleije8689e62010-09-28 15:57:37 +02001570 plchan->at = NULL;
1571 }
1572 /* Dequeue jobs not yet fired as well */
1573 pl08x_free_txd_list(pl08x, plchan);
1574 break;
1575 case DMA_PAUSE:
1576 pl08x_pause_phy_chan(plchan->phychan);
1577 plchan->state = PL08X_CHAN_PAUSED;
1578 break;
1579 case DMA_RESUME:
1580 pl08x_resume_phy_chan(plchan->phychan);
1581 plchan->state = PL08X_CHAN_RUNNING;
1582 break;
1583 default:
1584 /* Unknown command */
1585 ret = -ENXIO;
1586 break;
1587 }
1588
Russell King083be282012-05-26 14:09:53 +01001589 spin_unlock_irqrestore(&plchan->vc.lock, flags);
Linus Walleije8689e62010-09-28 15:57:37 +02001590
1591 return ret;
1592}
1593
1594bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
1595{
Russell King - ARM Linux7703eac2011-08-31 09:34:35 +01001596 struct pl08x_dma_chan *plchan;
Linus Walleije8689e62010-09-28 15:57:37 +02001597 char *name = chan_id;
1598
Russell King - ARM Linux7703eac2011-08-31 09:34:35 +01001599 /* Reject channels for devices not bound to this driver */
1600 if (chan->device->dev->driver != &pl08x_amba_driver.drv)
1601 return false;
1602
1603 plchan = to_pl08x_chan(chan);
1604
Linus Walleije8689e62010-09-28 15:57:37 +02001605 /* Check that the channel is not taken! */
1606 if (!strcmp(plchan->name, name))
1607 return true;
1608
1609 return false;
1610}
1611
1612/*
1613 * Just check that the device is there and active
Russell King - ARM Linux94ae8522011-01-16 20:18:05 +00001614 * TODO: turn this bit on/off depending on the number of physical channels
1615 * actually used, if it is zero... well shut it off. That will save some
1616 * power. Cut the clock at the same time.
Linus Walleije8689e62010-09-28 15:57:37 +02001617 */
1618static void pl08x_ensure_on(struct pl08x_driver_data *pl08x)
1619{
Linus Walleijaffa1152012-04-12 09:01:49 +02001620 /* The Nomadik variant does not have the config register */
1621 if (pl08x->vd->nomadik)
1622 return;
Viresh Kumar48a59ef2011-08-05 15:32:34 +05301623 writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG);
Linus Walleije8689e62010-09-28 15:57:37 +02001624}
1625
Linus Walleije8689e62010-09-28 15:57:37 +02001626static irqreturn_t pl08x_irq(int irq, void *dev)
1627{
1628 struct pl08x_driver_data *pl08x = dev;
Viresh Kumar28da2832011-08-05 15:32:36 +05301629 u32 mask = 0, err, tc, i;
Linus Walleije8689e62010-09-28 15:57:37 +02001630
Viresh Kumar28da2832011-08-05 15:32:36 +05301631 /* check & clear - ERR & TC interrupts */
1632 err = readl(pl08x->base + PL080_ERR_STATUS);
1633 if (err) {
1634 dev_err(&pl08x->adev->dev, "%s error interrupt, register value 0x%08x\n",
1635 __func__, err);
1636 writel(err, pl08x->base + PL080_ERR_CLEAR);
Linus Walleije8689e62010-09-28 15:57:37 +02001637 }
Linus Walleijd29bf012012-04-09 22:53:21 +02001638 tc = readl(pl08x->base + PL080_TC_STATUS);
Viresh Kumar28da2832011-08-05 15:32:36 +05301639 if (tc)
1640 writel(tc, pl08x->base + PL080_TC_CLEAR);
1641
1642 if (!err && !tc)
1643 return IRQ_NONE;
1644
Linus Walleije8689e62010-09-28 15:57:37 +02001645 for (i = 0; i < pl08x->vd->channels; i++) {
Viresh Kumar28da2832011-08-05 15:32:36 +05301646 if (((1 << i) & err) || ((1 << i) & tc)) {
Linus Walleije8689e62010-09-28 15:57:37 +02001647 /* Locate physical channel */
1648 struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i];
1649 struct pl08x_dma_chan *plchan = phychan->serving;
Russell Kinga936e792012-05-25 10:51:19 +01001650 struct pl08x_txd *tx;
Linus Walleije8689e62010-09-28 15:57:37 +02001651
Viresh Kumar28da2832011-08-05 15:32:36 +05301652 if (!plchan) {
1653 dev_err(&pl08x->adev->dev,
1654 "%s Error TC interrupt on unused channel: 0x%08x\n",
1655 __func__, i);
1656 continue;
1657 }
1658
Russell King083be282012-05-26 14:09:53 +01001659 spin_lock(&plchan->vc.lock);
Russell Kinga936e792012-05-25 10:51:19 +01001660 tx = plchan->at;
1661 if (tx) {
1662 plchan->at = NULL;
Russell Kingc48d4962012-05-25 11:48:51 +01001663 /*
1664 * This descriptor is done, release its mux
1665 * reservation.
1666 */
1667 pl08x_release_mux(plchan);
Russell King18536132012-05-26 14:42:23 +01001668 tx->done = true;
1669 vchan_cookie_complete(&tx->vd);
Russell Kingc33b6442012-05-25 15:41:13 +01001670
Russell Kinga5a488d2012-05-26 13:54:15 +01001671 /*
1672 * And start the next descriptor (if any),
1673 * otherwise free this channel.
1674 */
Russell King879f1272012-05-26 14:27:40 +01001675 if (vchan_next_desc(&plchan->vc))
Russell Kingc33b6442012-05-25 15:41:13 +01001676 pl08x_start_next_txd(plchan);
Russell Kinga5a488d2012-05-26 13:54:15 +01001677 else
1678 pl08x_phy_free(plchan);
Russell Kinga936e792012-05-25 10:51:19 +01001679 }
Russell King083be282012-05-26 14:09:53 +01001680 spin_unlock(&plchan->vc.lock);
Russell Kinga936e792012-05-25 10:51:19 +01001681
Linus Walleije8689e62010-09-28 15:57:37 +02001682 mask |= (1 << i);
1683 }
1684 }
Linus Walleije8689e62010-09-28 15:57:37 +02001685
1686 return mask ? IRQ_HANDLED : IRQ_NONE;
1687}
1688
Russell King - ARM Linux121c8472011-07-21 17:13:48 +01001689static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan)
1690{
Russell King - ARM Linux121c8472011-07-21 17:13:48 +01001691 chan->slave = true;
1692 chan->name = chan->cd->bus_id;
Russell Kinged91c132012-05-16 11:02:40 +01001693 chan->cfg.src_addr = chan->cd->addr;
1694 chan->cfg.dst_addr = chan->cd->addr;
Russell King - ARM Linux121c8472011-07-21 17:13:48 +01001695}
1696
Linus Walleije8689e62010-09-28 15:57:37 +02001697/*
1698 * Initialise the DMAC memcpy/slave channels.
1699 * Make a local wrapper to hold required data
1700 */
1701static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
Viresh Kumar3e27ee82011-08-05 15:32:27 +05301702 struct dma_device *dmadev, unsigned int channels, bool slave)
Linus Walleije8689e62010-09-28 15:57:37 +02001703{
1704 struct pl08x_dma_chan *chan;
1705 int i;
1706
1707 INIT_LIST_HEAD(&dmadev->channels);
Russell King - ARM Linux94ae8522011-01-16 20:18:05 +00001708
Linus Walleije8689e62010-09-28 15:57:37 +02001709 /*
1710 * Register as many many memcpy as we have physical channels,
1711 * we won't always be able to use all but the code will have
1712 * to cope with that situation.
1713 */
1714 for (i = 0; i < channels; i++) {
Viresh Kumarb201c112011-08-05 15:32:29 +05301715 chan = kzalloc(sizeof(*chan), GFP_KERNEL);
Linus Walleije8689e62010-09-28 15:57:37 +02001716 if (!chan) {
1717 dev_err(&pl08x->adev->dev,
1718 "%s no memory for channel\n", __func__);
1719 return -ENOMEM;
1720 }
1721
1722 chan->host = pl08x;
1723 chan->state = PL08X_CHAN_IDLE;
Russell Kingad0de2a2012-05-25 11:15:15 +01001724 chan->signal = -1;
Linus Walleije8689e62010-09-28 15:57:37 +02001725
1726 if (slave) {
Linus Walleije8689e62010-09-28 15:57:37 +02001727 chan->cd = &pl08x->pd->slave_channels[i];
Russell King - ARM Linux121c8472011-07-21 17:13:48 +01001728 pl08x_dma_slave_init(chan);
Linus Walleije8689e62010-09-28 15:57:37 +02001729 } else {
1730 chan->cd = &pl08x->pd->memcpy_channel;
1731 chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i);
1732 if (!chan->name) {
1733 kfree(chan);
1734 return -ENOMEM;
1735 }
1736 }
Viresh Kumar175a5e62011-08-05 15:32:32 +05301737 dev_dbg(&pl08x->adev->dev,
Linus Walleije8689e62010-09-28 15:57:37 +02001738 "initialize virtual channel \"%s\"\n",
1739 chan->name);
1740
Russell King18536132012-05-26 14:42:23 +01001741 chan->vc.desc_free = pl08x_desc_free;
Russell King083be282012-05-26 14:09:53 +01001742 vchan_init(&chan->vc, dmadev);
Linus Walleije8689e62010-09-28 15:57:37 +02001743 }
1744 dev_info(&pl08x->adev->dev, "initialized %d virtual %s channels\n",
1745 i, slave ? "slave" : "memcpy");
1746 return i;
1747}
1748
1749static void pl08x_free_virtual_channels(struct dma_device *dmadev)
1750{
1751 struct pl08x_dma_chan *chan = NULL;
1752 struct pl08x_dma_chan *next;
1753
1754 list_for_each_entry_safe(chan,
Russell King01d8dc62012-05-26 14:04:29 +01001755 next, &dmadev->channels, vc.chan.device_node) {
1756 list_del(&chan->vc.chan.device_node);
Linus Walleije8689e62010-09-28 15:57:37 +02001757 kfree(chan);
1758 }
1759}
1760
1761#ifdef CONFIG_DEBUG_FS
1762static const char *pl08x_state_str(enum pl08x_dma_chan_state state)
1763{
1764 switch (state) {
1765 case PL08X_CHAN_IDLE:
1766 return "idle";
1767 case PL08X_CHAN_RUNNING:
1768 return "running";
1769 case PL08X_CHAN_PAUSED:
1770 return "paused";
1771 case PL08X_CHAN_WAITING:
1772 return "waiting";
1773 default:
1774 break;
1775 }
1776 return "UNKNOWN STATE";
1777}
1778
1779static int pl08x_debugfs_show(struct seq_file *s, void *data)
1780{
1781 struct pl08x_driver_data *pl08x = s->private;
1782 struct pl08x_dma_chan *chan;
1783 struct pl08x_phy_chan *ch;
1784 unsigned long flags;
1785 int i;
1786
1787 seq_printf(s, "PL08x physical channels:\n");
1788 seq_printf(s, "CHANNEL:\tUSER:\n");
1789 seq_printf(s, "--------\t-----\n");
1790 for (i = 0; i < pl08x->vd->channels; i++) {
1791 struct pl08x_dma_chan *virt_chan;
1792
1793 ch = &pl08x->phy_chans[i];
1794
1795 spin_lock_irqsave(&ch->lock, flags);
1796 virt_chan = ch->serving;
1797
Linus Walleijaffa1152012-04-12 09:01:49 +02001798 seq_printf(s, "%d\t\t%s%s\n",
1799 ch->id,
1800 virt_chan ? virt_chan->name : "(none)",
1801 ch->locked ? " LOCKED" : "");
Linus Walleije8689e62010-09-28 15:57:37 +02001802
1803 spin_unlock_irqrestore(&ch->lock, flags);
1804 }
1805
1806 seq_printf(s, "\nPL08x virtual memcpy channels:\n");
1807 seq_printf(s, "CHANNEL:\tSTATE:\n");
1808 seq_printf(s, "--------\t------\n");
Russell King01d8dc62012-05-26 14:04:29 +01001809 list_for_each_entry(chan, &pl08x->memcpy.channels, vc.chan.device_node) {
Russell King - ARM Linux3e2a0372011-01-03 22:32:46 +00001810 seq_printf(s, "%s\t\t%s\n", chan->name,
Linus Walleije8689e62010-09-28 15:57:37 +02001811 pl08x_state_str(chan->state));
1812 }
1813
1814 seq_printf(s, "\nPL08x virtual slave channels:\n");
1815 seq_printf(s, "CHANNEL:\tSTATE:\n");
1816 seq_printf(s, "--------\t------\n");
Russell King01d8dc62012-05-26 14:04:29 +01001817 list_for_each_entry(chan, &pl08x->slave.channels, vc.chan.device_node) {
Russell King - ARM Linux3e2a0372011-01-03 22:32:46 +00001818 seq_printf(s, "%s\t\t%s\n", chan->name,
Linus Walleije8689e62010-09-28 15:57:37 +02001819 pl08x_state_str(chan->state));
1820 }
1821
1822 return 0;
1823}
1824
1825static int pl08x_debugfs_open(struct inode *inode, struct file *file)
1826{
1827 return single_open(file, pl08x_debugfs_show, inode->i_private);
1828}
1829
1830static const struct file_operations pl08x_debugfs_operations = {
1831 .open = pl08x_debugfs_open,
1832 .read = seq_read,
1833 .llseek = seq_lseek,
1834 .release = single_release,
1835};
1836
1837static void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
1838{
1839 /* Expose a simple debugfs interface to view all clocks */
Viresh Kumar3e27ee82011-08-05 15:32:27 +05301840 (void) debugfs_create_file(dev_name(&pl08x->adev->dev),
1841 S_IFREG | S_IRUGO, NULL, pl08x,
1842 &pl08x_debugfs_operations);
Linus Walleije8689e62010-09-28 15:57:37 +02001843}
1844
1845#else
1846static inline void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
1847{
1848}
1849#endif
1850
Russell Kingaa25afa2011-02-19 15:55:00 +00001851static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
Linus Walleije8689e62010-09-28 15:57:37 +02001852{
1853 struct pl08x_driver_data *pl08x;
Russell King - ARM Linuxf96ca9ec2011-01-03 22:35:08 +00001854 const struct vendor_data *vd = id->data;
Linus Walleije8689e62010-09-28 15:57:37 +02001855 int ret = 0;
1856 int i;
1857
1858 ret = amba_request_regions(adev, NULL);
1859 if (ret)
1860 return ret;
1861
1862 /* Create the driver state holder */
Viresh Kumarb201c112011-08-05 15:32:29 +05301863 pl08x = kzalloc(sizeof(*pl08x), GFP_KERNEL);
Linus Walleije8689e62010-09-28 15:57:37 +02001864 if (!pl08x) {
1865 ret = -ENOMEM;
1866 goto out_no_pl08x;
1867 }
1868
1869 /* Initialize memcpy engine */
1870 dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask);
1871 pl08x->memcpy.dev = &adev->dev;
1872 pl08x->memcpy.device_alloc_chan_resources = pl08x_alloc_chan_resources;
1873 pl08x->memcpy.device_free_chan_resources = pl08x_free_chan_resources;
1874 pl08x->memcpy.device_prep_dma_memcpy = pl08x_prep_dma_memcpy;
1875 pl08x->memcpy.device_prep_dma_interrupt = pl08x_prep_dma_interrupt;
1876 pl08x->memcpy.device_tx_status = pl08x_dma_tx_status;
1877 pl08x->memcpy.device_issue_pending = pl08x_issue_pending;
1878 pl08x->memcpy.device_control = pl08x_control;
1879
1880 /* Initialize slave engine */
1881 dma_cap_set(DMA_SLAVE, pl08x->slave.cap_mask);
1882 pl08x->slave.dev = &adev->dev;
1883 pl08x->slave.device_alloc_chan_resources = pl08x_alloc_chan_resources;
1884 pl08x->slave.device_free_chan_resources = pl08x_free_chan_resources;
1885 pl08x->slave.device_prep_dma_interrupt = pl08x_prep_dma_interrupt;
1886 pl08x->slave.device_tx_status = pl08x_dma_tx_status;
1887 pl08x->slave.device_issue_pending = pl08x_issue_pending;
1888 pl08x->slave.device_prep_slave_sg = pl08x_prep_slave_sg;
1889 pl08x->slave.device_control = pl08x_control;
1890
1891 /* Get the platform data */
1892 pl08x->pd = dev_get_platdata(&adev->dev);
1893 if (!pl08x->pd) {
1894 dev_err(&adev->dev, "no platform data supplied\n");
Julia Lawall983d7be2012-08-14 14:58:32 +02001895 ret = -EINVAL;
Linus Walleije8689e62010-09-28 15:57:37 +02001896 goto out_no_platdata;
1897 }
1898
1899 /* Assign useful pointers to the driver state */
1900 pl08x->adev = adev;
1901 pl08x->vd = vd;
1902
Russell King - ARM Linux30749cb2011-01-03 22:41:13 +00001903 /* By default, AHB1 only. If dualmaster, from platform */
1904 pl08x->lli_buses = PL08X_AHB1;
1905 pl08x->mem_buses = PL08X_AHB1;
1906 if (pl08x->vd->dualmaster) {
1907 pl08x->lli_buses = pl08x->pd->lli_buses;
1908 pl08x->mem_buses = pl08x->pd->mem_buses;
1909 }
1910
Linus Walleije8689e62010-09-28 15:57:37 +02001911 /* A DMA memory pool for LLIs, align on 1-byte boundary */
1912 pl08x->pool = dma_pool_create(DRIVER_NAME, &pl08x->adev->dev,
1913 PL08X_LLI_TSFR_SIZE, PL08X_ALIGN, 0);
1914 if (!pl08x->pool) {
1915 ret = -ENOMEM;
1916 goto out_no_lli_pool;
1917 }
1918
Linus Walleije8689e62010-09-28 15:57:37 +02001919 pl08x->base = ioremap(adev->res.start, resource_size(&adev->res));
1920 if (!pl08x->base) {
1921 ret = -ENOMEM;
1922 goto out_no_ioremap;
1923 }
1924
1925 /* Turn on the PL08x */
1926 pl08x_ensure_on(pl08x);
1927
Russell King - ARM Linux94ae8522011-01-16 20:18:05 +00001928 /* Attach the interrupt handler */
Linus Walleije8689e62010-09-28 15:57:37 +02001929 writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR);
1930 writel(0x000000FF, pl08x->base + PL080_TC_CLEAR);
1931
1932 ret = request_irq(adev->irq[0], pl08x_irq, IRQF_DISABLED,
Russell King - ARM Linuxb05cd8f2011-01-03 22:33:26 +00001933 DRIVER_NAME, pl08x);
Linus Walleije8689e62010-09-28 15:57:37 +02001934 if (ret) {
1935 dev_err(&adev->dev, "%s failed to request interrupt %d\n",
1936 __func__, adev->irq[0]);
1937 goto out_no_irq;
1938 }
1939
1940 /* Initialize physical channels */
Linus Walleijaffa1152012-04-12 09:01:49 +02001941 pl08x->phy_chans = kzalloc((vd->channels * sizeof(*pl08x->phy_chans)),
Linus Walleije8689e62010-09-28 15:57:37 +02001942 GFP_KERNEL);
1943 if (!pl08x->phy_chans) {
1944 dev_err(&adev->dev, "%s failed to allocate "
1945 "physical channel holders\n",
1946 __func__);
Julia Lawall983d7be2012-08-14 14:58:32 +02001947 ret = -ENOMEM;
Linus Walleije8689e62010-09-28 15:57:37 +02001948 goto out_no_phychans;
1949 }
1950
1951 for (i = 0; i < vd->channels; i++) {
1952 struct pl08x_phy_chan *ch = &pl08x->phy_chans[i];
1953
1954 ch->id = i;
1955 ch->base = pl08x->base + PL080_Cx_BASE(i);
1956 spin_lock_init(&ch->lock);
Linus Walleijaffa1152012-04-12 09:01:49 +02001957
1958 /*
1959 * Nomadik variants can have channels that are locked
1960 * down for the secure world only. Lock up these channels
1961 * by perpetually serving a dummy virtual channel.
1962 */
1963 if (vd->nomadik) {
1964 u32 val;
1965
1966 val = readl(ch->base + PL080_CH_CONFIG);
1967 if (val & (PL080N_CONFIG_ITPROT | PL080N_CONFIG_SECPROT)) {
1968 dev_info(&adev->dev, "physical channel %d reserved for secure access only\n", i);
1969 ch->locked = true;
1970 }
1971 }
1972
Viresh Kumar175a5e62011-08-05 15:32:32 +05301973 dev_dbg(&adev->dev, "physical channel %d is %s\n",
1974 i, pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE");
Linus Walleije8689e62010-09-28 15:57:37 +02001975 }
1976
1977 /* Register as many memcpy channels as there are physical channels */
1978 ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->memcpy,
1979 pl08x->vd->channels, false);
1980 if (ret <= 0) {
1981 dev_warn(&pl08x->adev->dev,
1982 "%s failed to enumerate memcpy channels - %d\n",
1983 __func__, ret);
1984 goto out_no_memcpy;
1985 }
1986 pl08x->memcpy.chancnt = ret;
1987
1988 /* Register slave channels */
1989 ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave,
Viresh Kumar3e27ee82011-08-05 15:32:27 +05301990 pl08x->pd->num_slave_channels, true);
Linus Walleije8689e62010-09-28 15:57:37 +02001991 if (ret <= 0) {
1992 dev_warn(&pl08x->adev->dev,
1993 "%s failed to enumerate slave channels - %d\n",
1994 __func__, ret);
1995 goto out_no_slave;
1996 }
1997 pl08x->slave.chancnt = ret;
1998
1999 ret = dma_async_device_register(&pl08x->memcpy);
2000 if (ret) {
2001 dev_warn(&pl08x->adev->dev,
2002 "%s failed to register memcpy as an async device - %d\n",
2003 __func__, ret);
2004 goto out_no_memcpy_reg;
2005 }
2006
2007 ret = dma_async_device_register(&pl08x->slave);
2008 if (ret) {
2009 dev_warn(&pl08x->adev->dev,
2010 "%s failed to register slave as an async device - %d\n",
2011 __func__, ret);
2012 goto out_no_slave_reg;
2013 }
2014
2015 amba_set_drvdata(adev, pl08x);
2016 init_pl08x_debugfs(pl08x);
Russell King - ARM Linuxb05cd8f2011-01-03 22:33:26 +00002017 dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n",
2018 amba_part(adev), amba_rev(adev),
2019 (unsigned long long)adev->res.start, adev->irq[0]);
Viresh Kumarb7b60182011-08-05 15:32:33 +05302020
Linus Walleije8689e62010-09-28 15:57:37 +02002021 return 0;
2022
2023out_no_slave_reg:
2024 dma_async_device_unregister(&pl08x->memcpy);
2025out_no_memcpy_reg:
2026 pl08x_free_virtual_channels(&pl08x->slave);
2027out_no_slave:
2028 pl08x_free_virtual_channels(&pl08x->memcpy);
2029out_no_memcpy:
2030 kfree(pl08x->phy_chans);
2031out_no_phychans:
2032 free_irq(adev->irq[0], pl08x);
2033out_no_irq:
2034 iounmap(pl08x->base);
2035out_no_ioremap:
2036 dma_pool_destroy(pl08x->pool);
2037out_no_lli_pool:
2038out_no_platdata:
2039 kfree(pl08x);
2040out_no_pl08x:
2041 amba_release_regions(adev);
2042 return ret;
2043}
2044
2045/* PL080 has 8 channels and the PL080 have just 2 */
2046static struct vendor_data vendor_pl080 = {
Linus Walleije8689e62010-09-28 15:57:37 +02002047 .channels = 8,
2048 .dualmaster = true,
2049};
2050
Linus Walleijaffa1152012-04-12 09:01:49 +02002051static struct vendor_data vendor_nomadik = {
2052 .channels = 8,
2053 .dualmaster = true,
2054 .nomadik = true,
2055};
2056
Linus Walleije8689e62010-09-28 15:57:37 +02002057static struct vendor_data vendor_pl081 = {
Linus Walleije8689e62010-09-28 15:57:37 +02002058 .channels = 2,
2059 .dualmaster = false,
2060};
2061
2062static struct amba_id pl08x_ids[] = {
2063 /* PL080 */
2064 {
2065 .id = 0x00041080,
2066 .mask = 0x000fffff,
2067 .data = &vendor_pl080,
2068 },
2069 /* PL081 */
2070 {
2071 .id = 0x00041081,
2072 .mask = 0x000fffff,
2073 .data = &vendor_pl081,
2074 },
2075 /* Nomadik 8815 PL080 variant */
2076 {
Linus Walleijaffa1152012-04-12 09:01:49 +02002077 .id = 0x00280080,
Linus Walleije8689e62010-09-28 15:57:37 +02002078 .mask = 0x00ffffff,
Linus Walleijaffa1152012-04-12 09:01:49 +02002079 .data = &vendor_nomadik,
Linus Walleije8689e62010-09-28 15:57:37 +02002080 },
2081 { 0, 0 },
2082};
2083
Dave Martin037566d2011-10-05 15:15:20 +01002084MODULE_DEVICE_TABLE(amba, pl08x_ids);
2085
Linus Walleije8689e62010-09-28 15:57:37 +02002086static struct amba_driver pl08x_amba_driver = {
2087 .drv.name = DRIVER_NAME,
2088 .id_table = pl08x_ids,
2089 .probe = pl08x_probe,
2090};
2091
2092static int __init pl08x_init(void)
2093{
2094 int retval;
2095 retval = amba_driver_register(&pl08x_amba_driver);
2096 if (retval)
2097 printk(KERN_WARNING DRIVER_NAME
Russell King - ARM Linuxe8b5e112011-01-03 22:30:24 +00002098 "failed to register as an AMBA device (%d)\n",
Linus Walleije8689e62010-09-28 15:57:37 +02002099 retval);
2100 return retval;
2101}
2102subsys_initcall(pl08x_init);